ChangeSet 1.1143.1.8, 2003/03/19 11:29:45-08:00, elenstev@mesatop.com [PATCH] i2c: spelling corrections for drivers/i2c Here are some spelling and typo fixes for drivers/i2c. drivers/i2c/chips/adm1021.c | 4 ++-- drivers/i2c/chips/lm75.c | 2 +- drivers/i2c/i2c-algo-pcf.c | 6 +++--- drivers/i2c/i2c-proc.c | 2 +- 4 files changed, 7 insertions(+), 7 deletions(-) diff -Nru a/drivers/i2c/chips/adm1021.c b/drivers/i2c/chips/adm1021.c --- a/drivers/i2c/chips/adm1021.c Thu Mar 20 12:55:46 2003 +++ b/drivers/i2c/chips/adm1021.c Thu Mar 20 12:55:46 2003 @@ -93,9 +93,9 @@ /* Initial values */ -/* Note: Eventhough I left the low and high limits named os and hyst, +/* Note: Even though I left the low and high limits named os and hyst, they don't quite work like a thermostat the way the LM75 does. I.e., -a lower temp than THYST actuall triggers an alarm instead of +a lower temp than THYST actually triggers an alarm instead of clearing it. Weird, ey? --Phil */ #define adm1021_INIT_TOS 60 #define adm1021_INIT_THYST 20 diff -Nru a/drivers/i2c/chips/lm75.c b/drivers/i2c/chips/lm75.c --- a/drivers/i2c/chips/lm75.c Thu Mar 20 12:55:46 2003 +++ b/drivers/i2c/chips/lm75.c Thu Mar 20 12:55:46 2003 @@ -25,7 +25,7 @@ #include -#define LM75_SYSCTL_TEMP 1200 /* Degrees Celcius * 10 */ +#define LM75_SYSCTL_TEMP 1200 /* Degrees Celsius * 10 */ /* Addresses to scan */ static unsigned short normal_i2c[] = { SENSORS_I2C_END }; diff -Nru a/drivers/i2c/i2c-algo-pcf.c b/drivers/i2c/i2c-algo-pcf.c --- a/drivers/i2c/i2c-algo-pcf.c Thu Mar 20 12:55:46 2003 +++ b/drivers/i2c/i2c-algo-pcf.c Thu Mar 20 12:55:46 2003 @@ -152,7 +152,7 @@ /* load own address in S0, effective address is (own << 1) */ i2c_outb(adap, get_own(adap)); - /* check it's realy writen */ + /* check it's really written */ if ((temp = i2c_inb(adap)) != get_own(adap)) { DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't set S0 (0x%02x).\n", temp)); return -ENXIO; @@ -168,7 +168,7 @@ /* load clock register S2 */ i2c_outb(adap, get_clock(adap)); - /* check it's realy writen, the only 5 lowest bits does matter */ + /* check it's really written, the only 5 lowest bits does matter */ if (((temp = i2c_inb(adap)) & 0x1f) != get_clock(adap)) { DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't set S2 (0x%02x).\n", temp)); return -ENXIO; @@ -177,7 +177,7 @@ /* Enable serial interface, idle, S0 selected */ set_pcf(adap, 1, I2C_PCF_IDLE); - /* check to see PCF is realy idled and we can access status register */ + /* check to see PCF is really idled and we can access status register */ if ((temp = get_pcf(adap, 1)) != (I2C_PCF_PIN | I2C_PCF_BB)) { DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't select S1` (0x%02x).\n", temp)); return -ENXIO; diff -Nru a/drivers/i2c/i2c-proc.c b/drivers/i2c/i2c-proc.c --- a/drivers/i2c/i2c-proc.c Thu Mar 20 12:55:46 2003 +++ b/drivers/i2c/i2c-proc.c Thu Mar 20 12:55:46 2003 @@ -270,7 +270,7 @@ } -/* This funcion reads or writes a 'real' value (encoded by the combination +/* This function reads or writes a 'real' value (encoded by the combination of an integer and a magnitude, the last is the power of ten the value should be divided with) to a /proc/sys directory. To use this function, you must (before registering the ctl_table) set the extra2 field to the