Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.24 (EGGHED) #4: Sun Aug 26 14:22:51 CEST 2018 mlelstv@gossam:/home/netbsd-current/obj.evbarm/home/netbsd-current/src/sys/arch/evbarm/compile/EGGHED total memory = 948 MB avail memory = 930 MB timecounter: Timecounters tick every 10.000 msec running cgd selftest aes-xts-256 aes-xts-512 done armfdt0 (root) simplebus0 at armfdt0: Raspberry Pi 3 Model B Plus Rev 1.3 simplebus1 at simplebus0 simplebus2 at simplebus0 fclock0 at simplebus2: 19200000 Hz fixed clock (osc) fclock1 at simplebus2: 480000000 Hz fixed clock (otg) simplebus3 at simplebus0 cpus0 at simplebus0 cpu0 at cpus0: 600 MHz Cortex-A53 r0p4 (Cortex V8A core) cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled cpu0: 32KB/64B 2-way L1 VIPT Instruction cache cpu0: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache cpu0: 512KB/64B 16-way write-through L2 PIPT Unified cache vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals cpu1 at cpus0 cpu2 at cpus0 cpu3 at cpus0 bcmicu0 at simplebus1 bcmicu1 at simplebus1: Multiprocessor bcmcprman0 at simplebus1: BCM283x Clock Controller gtmr0 at simplebus0: Generic Timer gtmr0: interrupting on local_intc irq 3 armgtmr0 at gtmr0: ARM Generic Timer (19200 kHz) timecounter: Timecounter "armgtmr0" frequency 19200000 Hz quality 500 bcmaux0 at simplebus1 /soc/thermal@7e212000 at simplebus1 not configured /soc/dsi@7e209000 at simplebus1 not configured bcmgpio0 at simplebus1: GPIO controller bcmgpio0: pins 0..31 interrupting on icu irq 177 bcmgpio0: pins 32..54 interrupting on icu irq 178 gpio0 at bcmgpio0: 54 pins bcmdmac0 at simplebus1: DMA0 DMA2 DMA4 DMA5 DMA8 DMA9 DMA10 /soc/power at simplebus1 not configured bsciic0 at simplebus1: Broadcom Serial Controller iic0 at bsciic0: I2C bus seeprom0 at iic0 addr 0x50: AT24Cxx or compatible EEPROM: size 32768 /phy at simplebus0 not configured bcmmbox0 at simplebus1: VC mailbox bcmmbox0: interrupting on icu irq 193 vcmbox0 at bcmmbox0 /soc/firmware at simplebus1 not configured gpioleds0 at simplebus0: ACT /soc/timer@7e003000 at simplebus1 not configured watchdog0 at simplebus1: Power management, Reset and Watchdog controller bcmrng0 at simplebus1: RNG plcom0 at simplebus1 plcom0: txfifo disabled sdhost0 at simplebus1: SD HOST controller sdhost0: interrupting on icu irq 184 bsciic1 at simplebus1: Broadcom Serial Controller iic1 at bsciic1: I2C bus /soc/pixelvalve@7e206000 at simplebus1 not configured /soc/pixelvalve@7e207000 at simplebus1 not configured com0 at simplebus1: BCM AUX UART, working fifo com0: console com0: interrupting on icu irq 157 /soc/pwm@7e20c000 at simplebus1 not configured sdhc0 at simplebus1: SDHC controller sdhc0: interrupting on icu irq 190 /soc/hvs@7e400000 at simplebus1 not configured bsciic2 at simplebus1: Broadcom Serial Controller iic2 at bsciic2: I2C bus /soc/vec@7e806000 at simplebus1 not configured /soc/pixelvalve@7e807000 at simplebus1 not configured /soc/hdmi@7e902000 at simplebus1 not configured dwctwo0 at simplebus1: USB controller dwctwo0: interrupting on icu irq 137 /soc/v3d@7ec00000 at simplebus1 not configured /soc/gpu at simplebus1 not configured genfb0 at simplebus1: switching to framebuffer console genfb0: framebuffer at 0xfe8fa000, size 1024x768, depth 32, stride 4096 wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation) wsmux1: connecting to wsdisplay0 wsdisplay0: screen 1-3 added (default, vt100 emulation) vchiq0 at simplebus1: BCM2835 VCHIQ timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 cpu2: 600 MHz Cortex-A53 r0p4 (Cortex V8A core) cpu2: DC enabled IC enabled WB disabled EABT branch prediction enabled cpu2: 32KB/64B 2-way L1 VIPT Instruction cache cpu2: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache cpu2: 512KB/64B 16-way write-through L2 PIPT Unified cache vfp2 at cpu2: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals cpu1: 600 MHz Cortex-A53 r0p4 (Cortex V8A core) cpu1: DC enabled IC enabled WB disabled EABT branch prediction enabled cpu1: 32KB/64B 2-way L1 VIPT Instruction cache cpu1: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache cpu1: 512KB/64B 16-way write-through L2 PIPT Unified cache vfp1 at cpu1: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals cpu3: 600 MHz Cortex-A53 r0p4 (Cortex V8A core) cpu3: DC enabled IC enabled WB disabled EABT branch prediction enabled cpu3: 32KB/64B 2-way L1 VIPT Instruction cache cpu3: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache cpu3: 512KB/64B 16-way write-through L2 PIPT Unified cache vfp3 at cpu3: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals sdmmc0 at sdhost0 sdhc0: SDHC 3.0, rev 153, platform DMA, 200000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks sdmmc1 at sdhc0 slot 0 dwctwo0: Core Release: 2.80a dwctwo0: Core Release: 2.80a (snpsid=4f54280a) usb0 at dwctwo0: USB revision 2.0 uhub0 at usb0: NetBSD (0000) DWC2 root hub (0000), class 9/0, rev 2.00/1.00, addr 1 uhub0: 1 port with 1 removable, self powered sdhc0: cmd timeout error sdmmc0: SD card status: 4-bit, C10, U3 ld0 at sdmmc0: <0x03:0x5344:SP16G:0x80:0xd8011982:0x0f7> ld0: 15193 MB, 7717 cyl, 64 head, 63 sec, 512 bytes/sect x 31116288 sectors dk0 at ld0: "ld0a", 30723072 blocks at 393216, type: ffs dk1 at ld0: "ld0b", 262144 blocks at 131072, type: swap dk2 at ld0: "ld0e", 126976 blocks at 2048, type: msdos ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz IPsec: Initialized Security Association Processing. sdmmc1: autoconfiguration error: unknown tuple code 0x91, length 3 (manufacturer 0x2d0, product 0xa9a6) at sdmmc1 function 1 not configured (manufacturer 0x2d0, product 0xa9a6) at sdmmc1 function 2 not configured (manufacturer 0x2d0, product 0xa9a6, standard function interface code 0x2) at sdmmc1 function 3 not configured uhub1 at uhub0 port 1: vendor 0424 (0x424) product 2514 (0x2514), class 9/0, rev 2.00/b.b3, addr 2 uhub1: multiple transaction translators uhub1: 4 ports with 3 removable, self powered uhub2 at uhub1 port 1: vendor 0424 (0x424) product 2514 (0x2514), class 9/0, rev 2.00/b.b3, addr 3 uhub2: multiple transaction translators uhub2: 3 ports with 2 removable, self powered uhub0: autoconfiguration error: illegal enable change, port 1 iscsi: attached. major = 203 WARNING: 2 errors while detecting hardware; check system log. boot device: ld0 root on dk0 dumps on dk1 root file system type: ffs kern.module.path=/stand/evbarm/8.99.24/modules vchiq0: interrupting on icu irq 194 vchiq: vchiq_init_state: slot_zero = 0xcabd0000, is_master = 0 vchiq: local ver 8 (min 3), remote ver 8. vcaudio0 at vchiq0: auds vchiq_get_state: g_state.remote->initialised != 1 (0) vchiq: vchiq_initialise: videocore initialized after 1 retries WARNING: no TOD clock present WARNING: using filesystem time WARNING: CHECK AND RESET THE DATE! audio0 at vcaudio0: half duplex, playback, capture, mmap, independent vcaudio0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000 vcaudio0: Latency: 100 milliseconds spkr0 at audio0: PC Speaker (synthesized) wsbell at spkr0 not configured warning: no /dev/console mue0 at uhub2 port 1 mue0: SMSC (0x424) LAN7800 USB 3.1 gigabit ethernet device (0x7800), rev 2.10/3.00, addr 4 mue0: LAN7800 mue0: Ethernet address b8:27:eb:e2:3b:99 ukphy0 at mue0 phy 1: OUI 0x00800f, model 0x0013, rev. 2 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto wsdisplay0: screen 4 added (default, vt100 emulation)