###
### Sun Feb 8 14:41:14 EST 2004:
### bmake bulk-package for cyrus-saslauthd-2.1.17nb1
### Current pkg count:  8 installed packages: cy2-ntlm-2.1.15nb1 cyrus-sasl-2.1.15nb2 digest-20021220 libtool-base-1.4.20010614nb19 openssl-0.9.6l patch-2.5.4nb2 perl-5.6.1nb10 xpkgwedge-1.9
###
BULK> Full rebuild in progress...
BULK> Cleaning package and its depends
===> Cleaning for cyrus-saslauthd-2.1.17nb1
===> Cleaning for patch-2.5.4nb2
BULK> Removing installed packages which are not needed to build cyrus-saslauthd-2.1.17nb1
BULK> Keeping BULK_PREREQ: xpkgwedge-1.9 (pkgtools/xpkgwedge)
BULK> Keeping BULK_PREREQ: digest-20021220 (pkgtools/digest)
BULK> cyrus-saslauthd-2.1.17nb1 requires installed package patch-2.5.4nb2 (devel/patch) to build.
/usr/pkg/sbin/pkg_delete -K /var/db/pkg -r openssl-0.9.6l
===========================================================================
If you won't be using cyrus-sasl-2.1.15nb2 any longer, you may want to remove

  * the following users:   cyrus

  * the following groups:  mail
===========================================================================
/usr/pkg/sbin/pkg_delete -K /var/db/pkg -r perl-5.6.1nb10
/usr/pkg/sbin/pkg_delete -K /var/db/pkg -r libtool-base-1.4.20010614nb19
BULK> Installing packages which are required to build cyrus-saslauthd-2.1.17nb1.
BULK> Required package patch-2.5.4nb2 (devel/patch) is already installed
BULK> Required package xpkgwedge-1.9 (pkgtools/xpkgwedge) is already installed
BULK> Required package digest-20021220 (pkgtools/digest) is already installed
bmake package (cyrus-saslauthd-2.1.17nb1)
===> Checking for vulnerabilities in cyrus-saslauthd-2.1.17nb1
=> Checksum OK for cyrus-sasl-2.1.17.tar.gz.
work.sol9 -> /work/pkgbuild/security/cyrus-saslauthd/work.sol9
===> Extracting for cyrus-saslauthd-2.1.17nb1
===> Required installed package patch>=2.2: patch-2.5.4nb2 found
==========================================================================
The following variables will affect the build process of this package,
cyrus-saslauthd-2.1.17nb1.  Their current value is shown below:

        * SASL_USE_GSSAPI (not defined)
        * USE_LDAP (not defined)
        * USE_PAM (not defined)

You may want to abort the process now with CTRL+C and change their value
before continuing.  Be sure to run `bmake clean' after the changes.
==========================================================================
===> Patching for cyrus-saslauthd-2.1.17nb1
===> Applying pkgsrc patches for cyrus-saslauthd-2.1.17nb1
===> Overriding tools for cyrus-saslauthd-2.1.17nb1
===> Buildlinking for cyrus-saslauthd-2.1.17nb1
===> Configuring for cyrus-saslauthd-2.1.17nb1
configure: WARNING: If you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used.
checking build system type... sparc-sun-solaris2.9
checking host system type... sparc-sun-solaris2
checking for a BSD-compatible install... /usr/ucb/install -c -o root -g root
checking whether build environment is sane... yes
checking for gawk... /usr/bin/nawk
checking whether bmake sets $(MAKE)... yes
checking for sparc-sun-solaris2-strip... no
checking for strip... strip
checking for sparc-sun-solaris2-gcc... cc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... no
checking whether cc accepts -g... yes
checking for cc option to accept ANSI C... none needed
checking for style of include used by bmake... GNU
checking dependency style of cc... none
checking how to run the C preprocessor... cc -E
checking for gawk... (cached) /usr/bin/nawk
checking whether bmake sets $(MAKE)... (cached) yes
checking whether ln -s works... yes
checking for a BSD-compatible install... /usr/ucb/install -c -o root -g root
checking for __attribute__... no
checking for runpath switch... -R
checking for connect... no
checking for gethostbyname in -lnsl... yes
checking for connect in -lsocket... yes
checking for res_search... no
checking for res_search in -lresolv... yes
checking for dn_expand... yes
checking for dns_lookup... no
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... no
checking for unistd.h... yes
checking for RSAPublicEncrypt in -lrsaref... no
checking openssl/evp.h usability... no
checking openssl/evp.h presence... no
checking for openssl/evp.h... no
checking for OpenSSL... no
checking for des_cbc_encrypt in -lcrypto... no
checking for DES_cbc_encrypt in -lcrypto... no
checking for des_cbc_encrypt in -ldes... no
checking for des_cbc_encrypt in -ldes425... no
checking for des_cbc_encrypt in -ldes524... no
checking for RSAPublicEncrypt in -lrsaref... (cached) no
checking for des_cbc_encrypt in -lcrypto... (cached) no
checking KERBEROS_V4... disabled
checking for crypt... yes
checking gssapi.h usability... no
checking gssapi.h presence... no
checking for gssapi.h... no
checking gssapi/gssapi.h usability... yes
checking gssapi/gssapi.h presence... yes
checking for gssapi/gssapi.h... yes
checking for res_search in -lresolv... (cached) yes
checking for gss_unwrap in -lgssapi... no
checking for gss_unwrap in -lgssapi_krb5... no
checking for csf_gss_acq_user in -lgss... no
checking for csf_gss_acq_user in -lgss... no
checking for gss_unwrap in -lgss... yes
checking GSSAPI... with implementation seam
checking for res_search in -lresolv... (cached) yes
checking for gsskrb5_register_acceptor_identity... no
checking for crypt... (cached) yes
checking for pam_start in -lpam... yes
checking security/pam_appl.h usability... yes
checking security/pam_appl.h presence... yes
checking for security/pam_appl.h... yes
checking for PAM support... yes
checking for inet_aton in -lresolv... yes
checking to include experimental LDAP support... no
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking whether time.h and sys/time.h may both be included... yes
checking crypt.h usability... yes
checking crypt.h presence... yes
checking for crypt.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking krb5.h usability... no
checking krb5.h presence... no
checking for krb5.h... no
checking for strings.h... (cached) yes
checking syslog.h usability... yes
checking syslog.h presence... yes
checking for syslog.h... yes
checking for unistd.h... (cached) yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking sys/uio.h usability... yes
checking sys/uio.h presence... yes
checking for sys/uio.h... yes
checking for an ANSI C-conforming const... yes
checking for pid_t... yes
checking whether cc implements __func__... yes
checking return type of signal handlers... void
checking for gethostname... yes
checking for mkdir... yes
checking for socket... no
checking for strdup... yes
checking for getspnam... yes
checking for strlcat... yes
checking for strlcpy... yes
checking for getaddrinfo... no
checking for getaddrinfo in -lsocket... yes
checking for getnameinfo... yes
checking whether you have ss_family in struct sockaddr_storage... yes
checking whether you have sa_len in struct sockaddr... no
checking for socklen_t... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating saslauthd.h
config.status: executing depfiles commands
/usr/bin/ln -sf saslauthd.h /work/pkgbuild/security/cyrus-saslauthd/work.sol9/cyrus-sasl-2.1.17/saslauthd/config.h
===> Building for cyrus-saslauthd-2.1.17nb1
bmake  all-am
source='mechanisms.c' object='mechanisms.o' libtool=no  depfile='.deps/mechanisms.Po' tmpdepfile='.deps/mechanisms.TPo'  depmode=none /bin/ksh ./config/depcomp  cc -DHAVE_CONFIG_H -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/pkg/etc/saslauthd.conf\" -I. -I. -I.. -I. -I. -I. -I./include -I./include -I./../include     -O -c `test -f 'mechanisms.c' || echo './'`mechanisms.c
source='auth_dce.c' object='auth_dce.o' libtool=no  depfile='.deps/auth_dce.Po' tmpdepfile='.deps/auth_dce.TPo'  depmode=none /bin/ksh ./config/depcomp  cc -DHAVE_CONFIG_H -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/pkg/etc/saslauthd.conf\" -I. -I. -I.. -I. -I. -I. -I./include -I./include -I./../include     -O -c `test -f 'auth_dce.c' || echo './'`auth_dce.c
source='auth_getpwent.c' object='auth_getpwent.o' libtool=no  depfile='.deps/auth_getpwent.Po' tmpdepfile='.deps/auth_getpwent.TPo'  depmode=none /bin/ksh ./config/depcomp  cc -DHAVE_CONFIG_H -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/pkg/etc/saslauthd.conf\" -I. -I. -I.. -I. -I. -I. -I./include -I./include -I./../include     -O -c `test -f 'auth_getpwent.c' || echo './'`auth_getpwent.c
"auth_getpwent.c", line 79: warning: implicit function declaration: crypt
source='auth_krb5.c' object='auth_krb5.o' libtool=no  depfile='.deps/auth_krb5.Po' tmpdepfile='.deps/auth_krb5.TPo'  depmode=none /bin/ksh ./config/depcomp  cc -DHAVE_CONFIG_H -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/pkg/etc/saslauthd.conf\" -I. -I. -I.. -I. -I. -I. -I./include -I./include -I./../include     -O -c `test -f 'auth_krb5.c' || echo './'`auth_krb5.c
source='auth_krb4.c' object='auth_krb4.o' libtool=no  depfile='.deps/auth_krb4.Po' tmpdepfile='.deps/auth_krb4.TPo'  depmode=none /bin/ksh ./config/depcomp  cc -DHAVE_CONFIG_H -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/pkg/etc/saslauthd.conf\" -I. -I. -I.. -I. -I. -I. -I./include -I./include -I./../include     -O -c `test -f 'auth_krb4.c' || echo './'`auth_krb4.c
source='auth_pam.c' object='auth_pam.o' libtool=no  depfile='.deps/auth_pam.Po' tmpdepfile='.deps/auth_pam.TPo'  depmode=none /bin/ksh ./config/depcomp  cc -DHAVE_CONFIG_H -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/pkg/etc/saslauthd.conf\" -I. -I. -I.. -I. -I. -I. -I./include -I./include -I./../include     -O -c `test -f 'auth_pam.c' || echo './'`auth_pam.c
"auth_pam.c", line 196: warning: assignment type mismatch:
	pointer to function(int, pointer to pointer to struct pam_message {int msg_style, pointer to char msg}, pointer to pointer to struct pam_response {pointer to char resp, int resp_retcode}, pointer to void) returning int "=" pointer to function(int, pointer to pointer to const struct pam_message {int msg_style, pointer to char msg}, pointer to pointer to struct pam_response {pointer to char resp, int resp_retcode}, pointer to void) returning int
source='auth_rimap.c' object='auth_rimap.o' libtool=no  depfile='.deps/auth_rimap.Po' tmpdepfile='.deps/auth_rimap.TPo'  depmode=none /bin/ksh ./config/depcomp  cc -DHAVE_CONFIG_H -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/pkg/etc/saslauthd.conf\" -I. -I. -I.. -I. -I. -I. -I./include -I./include -I./../include     -O -c `test -f 'auth_rimap.c' || echo './'`auth_rimap.c
source='auth_shadow.c' object='auth_shadow.o' libtool=no  depfile='.deps/auth_shadow.Po' tmpdepfile='.deps/auth_shadow.TPo'  depmode=none /bin/ksh ./config/depcomp  cc -DHAVE_CONFIG_H -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/pkg/etc/saslauthd.conf\" -I. -I. -I.. -I. -I. -I. -I./include -I./include -I./../include     -O -c `test -f 'auth_shadow.c' || echo './'`auth_shadow.c
"auth_shadow.c", line 158: warning: implicit function declaration: crypt
source='auth_sia.c' object='auth_sia.o' libtool=no  depfile='.deps/auth_sia.Po' tmpdepfile='.deps/auth_sia.TPo'  depmode=none /bin/ksh ./config/depcomp  cc -DHAVE_CONFIG_H -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/pkg/etc/saslauthd.conf\" -I. -I. -I.. -I. -I. -I. -I./include -I./include -I./../include     -O -c `test -f 'auth_sia.c' || echo './'`auth_sia.c
source='auth_sasldb.c' object='auth_sasldb.o' libtool=no  depfile='.deps/auth_sasldb.Po' tmpdepfile='.deps/auth_sasldb.TPo'  depmode=none /bin/ksh ./config/depcomp  cc -DHAVE_CONFIG_H -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/pkg/etc/saslauthd.conf\" -I. -I. -I.. -I. -I. -I. -I./include -I./include -I./../include     -O -c `test -f 'auth_sasldb.c' || echo './'`auth_sasldb.c
source='lak.c' object='lak.o' libtool=no  depfile='.deps/lak.Po' tmpdepfile='.deps/lak.TPo'  depmode=none /bin/ksh ./config/depcomp  cc -DHAVE_CONFIG_H -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/pkg/etc/saslauthd.conf\" -I. -I. -I.. -I. -I. -I. -I./include -I./include -I./../include     -O -c `test -f 'lak.c' || echo './'`lak.c
source='auth_ldap.c' object='auth_ldap.o' libtool=no  depfile='.deps/auth_ldap.Po' tmpdepfile='.deps/auth_ldap.TPo'  depmode=none /bin/ksh ./config/depcomp  cc -DHAVE_CONFIG_H -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/pkg/etc/saslauthd.conf\" -I. -I. -I.. -I. -I. -I. -I./include -I./include -I./../include     -O -c `test -f 'auth_ldap.c' || echo './'`auth_ldap.c
source='cache.c' object='cache.o' libtool=no  depfile='.deps/cache.Po' tmpdepfile='.deps/cache.TPo'  depmode=none /bin/ksh ./config/depcomp  cc -DHAVE_CONFIG_H -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/pkg/etc/saslauthd.conf\" -I. -I. -I.. -I. -I. -I. -I./include -I./include -I./../include     -O -c `test -f 'cache.c' || echo './'`cache.c
source='utils.c' object='utils.o' libtool=no  depfile='.deps/utils.Po' tmpdepfile='.deps/utils.TPo'  depmode=none /bin/ksh ./config/depcomp  cc -DHAVE_CONFIG_H -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/pkg/etc/saslauthd.conf\" -I. -I. -I.. -I. -I. -I. -I./include -I./include -I./../include     -O -c `test -f 'utils.c' || echo './'`utils.c
source='ipc_unix.c' object='ipc_unix.o' libtool=no  depfile='.deps/ipc_unix.Po' tmpdepfile='.deps/ipc_unix.TPo'  depmode=none /bin/ksh ./config/depcomp  cc -DHAVE_CONFIG_H -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/pkg/etc/saslauthd.conf\" -I. -I. -I.. -I. -I. -I. -I./include -I./include -I./../include     -O -c `test -f 'ipc_unix.c' || echo './'`ipc_unix.c
"ipc_unix.c", line 281: warning: statement not reached
source='ipc_doors.c' object='ipc_doors.o' libtool=no  depfile='.deps/ipc_doors.Po' tmpdepfile='.deps/ipc_doors.TPo'  depmode=none /bin/ksh ./config/depcomp  cc -DHAVE_CONFIG_H -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/pkg/etc/saslauthd.conf\" -I. -I. -I.. -I. -I. -I. -I./include -I./include -I./../include     -O -c `test -f 'ipc_doors.c' || echo './'`ipc_doors.c
source='saslauthd-main.c' object='saslauthd-main.o' libtool=no  depfile='.deps/saslauthd-main.Po' tmpdepfile='.deps/saslauthd-main.TPo'  depmode=none /bin/ksh ./config/depcomp  cc -DHAVE_CONFIG_H -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/pkg/etc/saslauthd.conf\" -I. -I. -I.. -I. -I. -I. -I./include -I./include -I./../include     -O -c `test -f 'saslauthd-main.c' || echo './'`saslauthd-main.c
source='md5.c' object='md5.o' libtool=no  depfile='.deps/md5.Po' tmpdepfile='.deps/md5.TPo'  depmode=none /bin/ksh ./config/depcomp  cc -DHAVE_CONFIG_H -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/pkg/etc/saslauthd.conf\" -I. -I. -I.. -I. -I. -I. -I./include -I./include -I./../include     -O -c `test -f 'md5.c' || echo './'`md5.c
"md5.c", line 140: undefined struct/union member: buffer
"md5.c", line 140: cannot dereference non-pointer type
"md5.c", line 141: improper member use: buffer
"md5.c", line 153: undefined struct/union member: buffer
"md5.c", line 153: cannot dereference non-pointer type
cc: acomp failed for md5.c
*** Error code 2

Stop.
bmake: stopped in /work/pkgbuild/security/cyrus-saslauthd/work.sol9/cyrus-sasl-2.1.17/saslauthd
*** Error code 1

Stop.
bmake: stopped in /work/pkgbuild/security/cyrus-saslauthd/work.sol9/cyrus-sasl-2.1.17/saslauthd
*** Error code 1

Stop.
bmake: stopped in /usr/pkgsrc/security/cyrus-saslauthd
*** Error code 1

Stop.
bmake: stopped in /usr/pkgsrc/security/cyrus-saslauthd
BULK> cyrus-saslauthd-2.1.17nb1 was marked as broken:
-rw-r--r--   1 root     other      15813 Feb  8 14:46 .broken.html
bmake deinstall
===> Deinstalling for cyrus-saslauthd
BULK> Marking all packages which depend upon cyrus-saslauthd-2.1.17nb1 as broken:
BULK> Build for cyrus-saslauthd-2.1.17nb1 was not successful, aborting.