This is a purely informative rendering of an RFC that includes verified errata. This rendering may not be used as a reference.

The following 'Verified' errata have been incorporated in this document: EID 5854
Internet Research Task Force (IRTF)                            S. Gueron
Request for Comments: 8452                University of Haifa and Amazon
Category: Informational                                       A. Langley
ISSN: 2070-1721                                               Google LLC
                                                              Y. Lindell
                                    Bar-Ilan University and Unbound Tech
                                                              April 2019


      AES-GCM-SIV: Nonce Misuse-Resistant Authenticated Encryption

Abstract

   This memo specifies two authenticated encryption algorithms that are
   nonce misuse resistant -- that is, they do not fail catastrophically
   if a nonce is repeated.

   This document is the product of the Crypto Forum Research Group.

Status of This Memo

   This document is not an Internet Standards Track specification; it is
   published for informational purposes.

   This document is a product of the Internet Research Task Force
   (IRTF).  The IRTF publishes the results of Internet-related research
   and development activities.  These results might not be suitable for
   deployment.  This RFC represents the consensus of the Crypto Forum
   Research Group of the Internet Research Task Force (IRTF).  Documents
   approved for publication by the IRSG are not candidates for any level
   of Internet Standard; see Section 2 of RFC 7841.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   https://www.rfc-editor.org/info/rfc8452.

Copyright Notice

   Copyright (c) 2019 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Requirements Language . . . . . . . . . . . . . . . . . . . .   3
   3.  POLYVAL . . . . . . . . . . . . . . . . . . . . . . . . . . .   3
   4.  Encryption  . . . . . . . . . . . . . . . . . . . . . . . . .   4
   5.  Decryption  . . . . . . . . . . . . . . . . . . . . . . . . .   7
   6.  AEADs . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10
   7.  Field Operation Examples  . . . . . . . . . . . . . . . . . .  10
   8.  Worked Example  . . . . . . . . . . . . . . . . . . . . . . .  10
   9.  Security Considerations . . . . . . . . . . . . . . . . . . .  11
   10. IANA Considerations . . . . . . . . . . . . . . . . . . . . .  14
   11. References  . . . . . . . . . . . . . . . . . . . . . . . . .  14
     11.1.  Normative References . . . . . . . . . . . . . . . . . .  14
     11.2.  Informative References . . . . . . . . . . . . . . . . .  15
   Appendix A.  The Relationship between POLYVAL and GHASH . . . . .  17
   Appendix B.  Additional Comparisons with AES-GCM  . . . . . . . .  19
   Appendix C.  Test Vectors . . . . . . . . . . . . . . . . . . . .  20
     C.1.  AEAD_AES_128_GCM_SIV  . . . . . . . . . . . . . . . . . .  20
     C.2.  AEAD_AES_256_GCM_SIV  . . . . . . . . . . . . . . . . . .  30
     C.3.  Counter Wrap Tests  . . . . . . . . . . . . . . . . . . .  41
   Acknowledgements  . . . . . . . . . . . . . . . . . . . . . . . .  42
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  42

1.  Introduction

   The concept of Authenticated Encryption with Additional Data (AEAD)
   [RFC5116] couples confidentiality and integrity in a single
   operation, avoiding the risks of the previously common practice of
   using ad hoc constructions of block-cipher and hash primitives.  The
   most popular AEAD, AES-GCM [GCM], is seeing widespread use due to its
   attractive performance.

   However, some AEADs (including AES-GCM) suffer catastrophic failures
   of confidentiality and/or integrity when two distinct messages are
   encrypted with the same key and nonce.  While the requirements for
   AEADs specify that the pair of (key, nonce) shall only ever be used
   once, and thus prohibit this, this is a worry in practice.

   Nonce misuse-resistant AEADs do not suffer from this problem.  For
   this class of AEADs, encrypting two messages with the same nonce only
   discloses whether the messages were equal or not.  This is the
   minimum amount of information that a deterministic algorithm can leak
   in this situation.

   This memo specifies two nonce misuse-resistant AEADs:
   AEAD_AES_128_GCM_SIV and AEAD_AES_256_GCM_SIV.  These AEADs are
   designed to be able to take advantage of existing hardware support

   for AES-GCM and can decrypt within 5% of the speed of AES-GCM (for
   multikilobyte messages).  Encryption is, perforce, slower than
   AES-GCM, because two passes are required in order to achieve that
   nonce misuse-resistance property.  However, measurements suggest that
   it can still run at two-thirds of the speed of AES-GCM.

   We suggest that these AEADs be considered in any situation where
   nonce uniqueness cannot be guaranteed.  This includes situations
   where there is no stateful counter or where such state cannot be
   guaranteed, as when multiple encryptors use the same key.  As
   discussed in Section 9, it is RECOMMENDED to use this scheme with
   randomly chosen nonces.

   This document represents the consensus of the Crypto Forum Research
   Group (CFRG).

2.  Requirements Language

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in
   BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

3.  POLYVAL

   The GCM-SIV construction is similar to GCM: the block cipher is used
   in counter mode to encrypt the plaintext, and a polynomial
   authenticator is used to provide integrity.  The authenticator in
   GCM-SIV is called POLYVAL.

   POLYVAL, like GHASH (the authenticator in AES-GCM; see [GCM],
   Section 6.4), operates in a binary field of size 2^128.  The field is
   defined by the irreducible polynomial x^128 + x^127 + x^126 + x^121 +
   1.  The sum of any two elements in the field is the result of XORing
   them.  The product of any two elements is calculated using standard
   (binary) polynomial multiplication followed by reduction modulo the
   irreducible polynomial.

   We define another binary operation on elements of the field:
   dot(a, b), where dot(a, b) = a * b * x^-128.  The value of the field
   element x^-128 is equal to x^127 + x^124 + x^121 + x^114 + 1.  The
   result of this multiplication, dot(a, b), is another field element.

   Polynomials in this field are converted to and from 128-bit strings
   by taking the least significant bit of the first byte to be the
   coefficient of x^0, the most significant bit of the first byte to be
   the coefficient of x^7, and so on, until the most significant bit of
   the last byte is the coefficient of x^127.

   POLYVAL takes a field element, H, and a series of field elements
   X_1, ..., X_s.  Its result is S_s, where S is defined by the
   iteration S_0 = 0; S_j = dot(S_{j-1} + X_j, H), for j = 1..s.

   We note that POLYVAL(H, X_1, X_2, ...) is equal to
   ByteReverse(GHASH(ByteReverse(H) * x, ByteReverse(X_1),
   ByteReverse(X_2), ...)), where ByteReverse is a function that
   reverses the order of 16 bytes.  See Appendix A for a more detailed
   explanation.

4.  Encryption

   AES-GCM-SIV encryption takes a 16- or 32-byte key-generating key, a
   96-bit nonce, and plaintext and additional data byte strings of
   variable length.  It outputs an authenticated ciphertext that will be
   16 bytes longer than the plaintext.  Both encryption and decryption
   are only defined on inputs that are a whole number of bytes.

   If the key-generating key is 16 bytes long, then AES-128 is used
   throughout.  Otherwise, AES-256 is used throughout.

   The first step of encryption is to generate per-nonce, message-
   authentication and message-encryption keys.  The message-
   authentication key is 128 bit, and the message-encryption key is
   either 128 (for AES-128) or 256 bit (for AES-256).

   These keys are generated by encrypting a series of plaintext blocks
   that contain a 32-bit, little-endian counter followed by the nonce,
   and then discarding the second half of the resulting ciphertext.  In
   the AES-128 case, 128 + 128 = 256 bits of key material need to be
   generated, and, since encrypting each block yields 64 bits after
   discarding half, four blocks need to be encrypted.  The counter
   values for these blocks are 0, 1, 2, and 3.  For AES-256, six blocks
   are needed in total, with counter values 0 through 5 (inclusive).

   In pseudocode form, where "++" indicates concatenation and "x[:8]"
   indicates taking only the first eight bytes from x:

   func derive_keys(key_generating_key, nonce) {
     message_authentication_key =
         AES(key = key_generating_key,
             block = little_endian_uint32(0) ++ nonce)[:8] ++
         AES(key = key_generating_key,
             block = little_endian_uint32(1) ++ nonce)[:8]
     message_encryption_key =
         AES(key = key_generating_key,
             block = little_endian_uint32(2) ++ nonce)[:8] ++
         AES(key = key_generating_key,
             block = little_endian_uint32(3) ++ nonce)[:8]

     if bytelen(key_generating_key) == 32 {
       message_encryption_key ++=
           AES(key = key_generating_key,
               block = little_endian_uint32(4) ++ nonce)[:8] ++
           AES(key = key_generating_key,
               block = little_endian_uint32(5) ++ nonce)[:8]
     }

     return message_authentication_key, message_encryption_key
   }

   Define the "length block" as a 16-byte value that is the
   concatenation of the 64-bit, little-endian encodings of
   bytelen(additional_data) * 8 and bytelen(plaintext) * 8.  Pad the
   plaintext and additional data with zeros until they are each a
   multiple of 16 bytes, the AES block size.  Then X_1, X_2, ... (the
   series of field elements that are inputs to POLYVAL) are the
   concatenation of the padded additional data, the padded plaintext,
   and the length block.

   Calculate S_s = POLYVAL(message-authentication-key, X_1, X_2, ...).
   XOR the first twelve bytes of S_s with the nonce and clear the most
   significant bit of the last byte.  Encrypt the result with AES using
   the message-encryption key to produce the tag.

   (It's worth highlighting a contrast with AES-GCM here: AES-GCM
   authenticates the encoded additional data and ciphertext, while
   AES-GCM-SIV authenticates the encoded additional data and plaintext.)

   The encrypted plaintext is produced by using AES, with the message-
   encryption key, in counter mode (see [SP800-38A], Section 6.5) on the
   unpadded plaintext.  The initial counter block is the tag with the
   most significant bit of the last byte set to one.  The counter

   advances by incrementing the first 32 bits interpreted as an
   unsigned, little-endian integer, wrapping at 2^32.  The result of the
   encryption is the encrypted plaintext (truncated to the length of the
   plaintext), followed by the tag.

   In pseudocode form, the encryption process can be expressed as:

   func right_pad_to_multiple_of_16_bytes(input) {
     while (bytelen(input) % 16 != 0) {
       input = input ++ "\x00"
     }
     return input
   }

   func AES_CTR(key, initial_counter_block, in) {
     block = initial_counter_block

     output = ""
     while bytelen(in) > 0 {
       keystream_block = AES(key = key, block = block)
       block[0:4] = little_endian_uint32(
           read_little_endian_uint32(block[0:4]) + 1)

       todo = min(bytelen(in), bytelen(keystream_block)
       for j = 0; j < todo; j++ {
         output = output ++ (keystream_block[j] ^ in[j])
       }

       in = in[todo:]
     }

     return output
   }

   func encrypt(key_generating_key,
                nonce,
                plaintext,
                additional_data) {
     if bytelen(plaintext) > 2^36 {
       fail()
     }
     if bytelen(additional_data) > 2^36 {
       fail()
     }

     message_encryption_key, message_authentication_key =
         derive_keys(key_generating_key, nonce)

     length_block =
         little_endian_uint64(bytelen(additional_data) * 8) ++
         little_endian_uint64(bytelen(plaintext) * 8)
     padded_plaintext = right_pad_to_multiple_of_16_bytes(plaintext)
     padded_ad = right_pad_to_multiple_of_16_bytes(additional_data)
     S_s = POLYVAL(key = message_authentication_key,
                   input = padded_ad ++ padded_plaintext ++
                           length_block)
     for i = 0; i < 12; i++ {
       S_s[i] ^= nonce[i]
     }
     S_s[15] &= 0x7f
     tag = AES(key = message_encryption_key, block = S_s)

     counter_block = tag
     counter_block[15] |= 0x80
     return AES_CTR(key = message_encryption_key,
                    initial_counter_block = counter_block,
                    in = plaintext) ++
            tag
   }

5.  Decryption

   Decryption takes a 16- or 32-byte key-generating key, a 96-bit nonce,
   and ciphertext and additional data byte strings of variable length.
   It either fails or outputs a plaintext that is 16 bytes shorter than
   the ciphertext.

   To decrypt an AES-GCM-SIV ciphertext, first derive the message-
   encryption and message-authentication keys in the same manner as when
   encrypting.

   If the ciphertext is less than 16 bytes or more than 2^36 + 16 bytes,
   then fail.  Otherwise, split the input into the encrypted plaintext
   and a 16-byte tag.  Decrypt the encrypted plaintext with the message-
   encryption key in counter mode, where the initial counter block is
   the tag with the most significant bit of the last byte set to one.
   Advance the counter for each block in the same way as when
   encrypting.  At this point, the plaintext is unauthenticated and MUST
   NOT be output until the following tag confirmation is complete:

   Pad the additional data and plaintext with zeros until they are each
   a multiple of 16 bytes, the AES block size.  Calculate the length
   block and X_1, X_2, ... as above and compute
   S_s = POLYVAL(message-authentication-key, X_1, X_2, ...)

   Compute the expected tag by XORing S_s and the nonce, clearing the
   most significant bit of the last byte and encrypting with the
   message-encryption key.  Compare the provided and expected tag values
   in constant time.  Fail the decryption if they do not match (and do
   not release the plaintext); otherwise, return the plaintext.

   In pseudocode form, the decryption process can be expressed as:

   func decrypt(key_generating_key,
                nonce,
                ciphertext,
                additional_data) {
     if bytelen(ciphertext) < 16 || bytelen(ciphertext) > 2^36 + 16 {
       fail()
     }
     if bytelen(additional_data) > 2^36 {
       fail()
     }

     message_encryption_key, message_authentication_key =
         derive_keys(key_generating_key, nonce)

     tag = ciphertext[bytelen(ciphertext)-16:]

     counter_block = tag
     counter_block[15] |= 0x80
     plaintext = AES_CTR(key = message_encryption_key,
                         initial_counter_block = counter_block,
                         in = ciphertext[:bytelen(ciphertext)-16])

     length_block =
         little_endian_uint64(bytelen(additional_data) * 8) ++
         little_endian_uint64(bytelen(plaintext) * 8)
     padded_plaintext = right_pad_to_multiple_of_16_bytes(plaintext)
     padded_ad = right_pad_to_multiple_of_16_bytes(additional_data)
     S_s = POLYVAL(key = message_authentication_key,
                   input = padded_ad ++ padded_plaintext ++
                           length_block)
     for i = 0; i < 12; i++ {
       S_s[i] ^= nonce[i]
     }
     S_s[15] &= 0x7f
     expected_tag = AES(key = message_encryption_key, block = S_s)

     xor_sum = 0
     for i := 0; i < bytelen(expected_tag); i++ {
       xor_sum |= expected_tag[i] ^ tag[i]
     }

     if xor_sum != 0 {
       fail()
     }

     return plaintext
   }

6.  AEADs

   We define two AEADs, in the format of RFC 5116, that use AES-GCM-SIV:
   AEAD_AES_128_GCM_SIV and AEAD_AES_256_GCM_SIV.  They differ only in
   the size of the AES key used.

   The key input to these AEADs becomes the key-generating key.  Thus,
   AEAD_AES_128_GCM_SIV takes a 16-byte key and AEAD_AES_256_GCM_SIV
   takes a 32-byte key.

   The parameters for AEAD_AES_128_GCM_SIV are then as follows:
   K_LEN is 16, P_MAX is 2^36, A_MAX is 2^36, N_MIN and N_MAX are 12,
   and C_MAX is 2^36 + 16.

   The parameters for AEAD_AES_256_GCM_SIV differ only in the key size:
   K_LEN is 32, P_MAX is 2^36, A_MAX is 2^36, N_MIN and N_MAX are 12,
   and C_MAX is 2^36 + 16.

7.  Field Operation Examples

   Polynomials in this document will be written as 16-byte values.  For
   example, the sixteen bytes 01000000000000000000000000000492 would
   represent the polynomial x^127 + x^124 + x^121 + x^114 + 1, which is
   also the value of x^-128 in this field.

      If a = 66e94bd4ef8a2c3b884cfa59ca342b2e and
         b = ff000000000000000000000000000000,
    then a + b = 99e94bd4ef8a2c3b884cfa59ca342b2e,
         a * b = 37856175e9dc9df26ebc6d6171aa0ae9, and
         dot(a, b) = ebe563401e7e91ea3ad6426b8140c394.

8.  Worked Example

   Consider the encryption of the plaintext "Hello world" with the
   additional data "example" under key ee8e1ed9ff2540ae8f2ba9f50bc2f27c
   using AEAD_AES_128_GCM_SIV.  The random nonce that we'll use for this
   example is 752abad3e0afb5f434dc4310.

   In order to generate the message-authentication and message-
   encryption keys, a counter is combined with the nonce to form four
   blocks.  These blocks are encrypted with the key given above:

   Counter |       Nonce                         Ciphertext
   00000000752abad3e0afb5f434dc4310 -> 310728d9911f1f38c40e952ca83d093e
   01000000752abad3e0afb5f434dc4310 -> 37b24316c3fab9a046ae90952daa0450
   02000000752abad3e0afb5f434dc4310 -> a4c5ae624996327947920b2d2412474b
   03000000752abad3e0afb5f434dc4310 -> c100be4d7e2c6edd1efef004305ab1e7

   The latter halves of the ciphertext blocks are discarded and the
   remaining bytes are concatenated to form the per-message keys.  Thus,
   the message-authentication key is 310728d9911f1f3837b24316c3fab9a0,
   and the message-encryption key is a4c5ae6249963279c100be4d7e2c6edd.

   The length block contains the encoding of the bit lengths of the
   additional data and plaintext, respectively.  The string "example" is
   seven characters, thus 56 bits (or 0x38 in hex).  The string "Hello
   world" is 11 characters, or 88 = 0x58 bits.  Thus, the length block
   is 38000000000000005800000000000000.

   The input to POLYVAL is the padded additional data, padded plaintext,
   and then the length block.  This is 6578616d706c650000000000000000004
   8656c6c6f20776f726c64000000000038000000000000005800000000000000,
   based on the ASCII encoding of "example" (6578616d706c65) and "Hello
   world" (48656c6c6f20776f726c64).

   Calling POLYVAL with the message-authentication key and the input
   above results in S_s = ad7fcf0b5169851662672f3c5f95138f.

   Before encrypting, the nonce is XORed in and the most significant bit
   of the last byte is cleared.  This gives
   d85575d8b1c630e256bb6c2c5f95130f, because that bit happened to be one
   previously.  Encrypting with the message-encryption key (using
   AES-128) gives the tag, which is 4fbcdeb7e4793f4a1d7e4faa70100af1.

   In order to form the initial counter block, the most significant bit
   of the last byte of the tag is set to one.  That doesn't result in a
   change in this example.  Encrypting this with the message key (using
   AES-128) gives the first block of the keystream:
   1551f2c1787e81deac9a99f139540ab5.

   The final ciphertext is the result of XORing the plaintext with the
   keystream and appending the tag.  That gives
   5d349ead175ef6b1def6fd4fbcdeb7e4793f4a1d7e4faa70100af1.

9.  Security Considerations

   AES-GCM-SIV decryption involves first producing an unauthenticated
   plaintext.  This plaintext is vulnerable to manipulation by an
   attacker; thus, if an implementation released some or all of the
   plaintext before authenticating it, other parts of a system may
   process malicious data as if it were authentic.  AES-GCM might be
   less likely to lead implementations to do this because there the
   ciphertext is generally authenticated before, or concurrently with,
   the plaintext calculation.  Therefore, this text requires that
   implementations MUST NOT release unauthenticated plaintext.  Thus,
   system designers should consider memory limitations when picking the

   size of AES-GCM-SIV plaintexts: large plaintexts may not fit in the
   available memory of some machines, tempting implementations to
   release unverified plaintext.

   A detailed cryptographic analysis of AES-GCM-SIV appears in
   [AES-GCM-SIV], and the remainder of this section is a summary of that
   paper.

   The AEADs defined in this document calculate fresh AES keys for each
   nonce.  This allows a larger number of plaintexts to be encrypted
   under a given key.  Without this step, AES-GCM-SIV encryption would
   be limited by the birthday bound like other standard modes (e.g.,
   AES-GCM, AES-CCM [RFC3610], and AES-SIV [RFC5297]).  This means that
   when 2^64 blocks have been encrypted overall, a distinguishing
   adversary who is trying to break the confidentiality of the scheme
   has an advantage of 1/2.  Thus, in order to limit the adversary's
   advantage to 2^-32, at most 2^48 blocks can be encrypted overall.  In
   contrast, by deriving fresh keys from each nonce, it is possible to
   encrypt a far larger number of messages and blocks with AES-GCM-SIV.

   We stress that nonce misuse-resistant schemes guarantee that if a
   nonce repeats, then the only security loss is that identical
   plaintexts will produce identical ciphertexts.  Since this can also
   be a concern (as the fact that the same plaintext has been encrypted
   twice is revealed), we do not recommend using a fixed nonce as a
   policy.  In addition, as we show below, better-than-birthday bounds
   are achieved by AES-GCM-SIV when the nonce repetition rate is low.
   Finally, as shown in [BHT18], there is a great security benefit in
   the multiuser/multikey setting when each particular nonce is reused
   by a small number of users only.  We stress that the nonce misuse-
   resistance property is not intended to be coupled with intentional
   nonce reuse; rather, such schemes provide the best possible security
   in the event of nonce reuse.  Due to all of the above, it is
   RECOMMENDED that AES-GCM-SIV nonces be randomly generated.

   Some example usage bounds for AES-GCM-SIV are given below.  The
   adversary's advantage is the "AdvEnc" from [key-derive] and is
   colloquially the ability of an attacker to distinguish ciphertexts
   from random bit strings.  The bounds below limit this advantage to
   2^-32.  For up to 256 uses of the same nonce and key (i.e., where one
   can assume that nonce misuse is no more than this bound), the
   following message limits should be respected (this assumes a short
   additional authenticated data (AAD), i.e., less than 64 bytes):

      2^29 messages, where each plaintext is at most 1 GiB

      2^35 messages, where each plaintext is at most 128 MiB

      2^49 messages, where each plaintext is at most 1 MiB

      2^61 messages, where each plaintext is at most 16 KiB

   Suzuki et al. [multi-birthday] show that even if nonces are selected
   uniformly at random, the probability that one or more values would be
   repeated 256 or more times is negligible until the number of nonces
   reaches 2^102.  (Specifically, the probability is 1/((2^96)^(255)) *
   Binomial(q, 256), where q is the number of nonces.)  Since 2^102 is
   vastly greater than the limit on the number of plaintexts per key
   given above, we don't feel that this limit on the number of repeated
   nonces will be a problem.  This also means that selecting nonces at
   random is a safe practice with AES-GCM-SIV.  The bounds obtained for
   random nonces are as follows (as above, for these bounds, the
   adversary's advantage is at most 2^-32):

      2^32 messages, where each plaintext is at most 8 GiB

      2^48 messages, where each plaintext is at most 32 MiB

      2^64 messages, where each plaintext is at most 128 KiB

   For situations where, for some reason, an even higher number of nonce
   repeats is possible (e.g., in devices with very poor randomness), the
   message limits need to be reconsidered.  Theorem 7 in [AES-GCM-SIV]
   contains more details, but for up to 1,024 repeats of each nonce, the
   limits would be (again assuming a short AAD, i.e., less than 64
   bytes):

      2^25 messages, where each plaintext is at most 1 GiB

      2^31 messages, where each plaintext is at most 128 MiB

      2^45 messages, where each plaintext is at most 1 MiB

      2^57 messages, where each plaintext is at most 16 KiB

   In addition to calculating fresh AES keys for each nonce, these AEADs
   also calculate fresh POLYVAL keys.  Previous versions of GCM-SIV did
   not do this and instead used part of the AEAD's key as the POLYVAL
   key.  Bleichenbacher pointed out [Bleichenbacher16] that this allowed
   an attacker who controlled the AEAD key to force the POLYVAL key to
   be zero.  If a user of this AEAD authenticated messages with a secret
   additional-data value, then this would be insecure as the attacker
   could calculate a valid authenticator without knowing the input.
   This does not violate the standard properties of an AEAD as the

   additional data is not assumed to be confidential.  However, we want
   these AEADs to be robust against plausible misuse and also to be
   drop-in replacements for AES-GCM and so derive nonce-specific POLYVAL
   keys to avoid this issue.

   We also wish to note that the probability of successful forgery
   increases with the number of attempts that an attacker is permitted.
   The advantage defined in [key-derive] and used above is specified in
   terms of the ability of an attacker to distinguish ciphertexts from
   random bit strings.  It thus covers both confidentiality and
   integrity, and Theorem 6.2 in [key-derive] shows that the advantage
   increases with the number of decryption attempts, although much more
   slowly than with the number of encryptions; the dependence on the
   number of decryption queries for forgery is actually only linear, not
   quadratic.  The latter is an artifact of the bound in the paper not
   being tight.  If an attacker is permitted extremely large numbers of
   attempts, then the tiny probability that any given attempt succeeds
   may sum to a non-trivial chance.

   A security analysis of a similar scheme without nonce-based key
   derivation appears in [GCM-SIV], and a full analysis of the bounds
   when applying nonce-based key derivation appears in [key-derive].  A
   larger table of bounds and other information appears at
   [aes-gcm-siv-homepage].

   The multiuser/multikey security of AES-GCM-SIV was studied by
   [BHT18], which showed that security is almost the same as in the
   single-user setting, as long as nonces do not repeat many times
   across many users.  This is the case when nonces are chosen randomly.

10.  IANA Considerations

   IANA has added two entries to the "AEAD Algorithms" registry:
   AEAD_AES_128_GCM_SIV (Numeric ID 30) and AEAD_AES_256_GCM_SIV
   (Numeric ID 31), both referencing this document as their
   specification.

11.  References

11.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [SP800-38A]
              Dworkin, M., "Recommendation for Block Cipher Modes of
              Operation: Methods and Techniques", NIST SP 800-38A,
              DOI 10.6028/NIST.SP.800-38A, December 2001,
              <https://csrc.nist.gov/publications/detail/sp/800-38a/
              final>.

11.2.  Informative References

   [AES-GCM-SIV]
              Gueron, S., Langley, A., and Y. Lindell, "AES-GCM-SIV:
              Specification and Analysis", July 2017,
              <https://eprint.iacr.org/2017/168>.

   [aes-gcm-siv-homepage]
              Gueron, S., Langley, A., and Y. Lindell, "Webpage for the
              AES-GCM-SIV Mode of Operation",
              <https://cyber.biu.ac.il/aes-gcm-siv/>.

   [BHT18]    Bose, P., Hoang, V., and S. Tessaro, "Revisiting AES-GCM-
              SIV: Multi-user Security, Faster Key Derivation, and
              Better Bounds", Advances in Cryptology - EUROCRYPT 2018,
              DOI 10.1007/978-3-319-78381-9_18, May 2018,
              <https://eprint.iacr.org/2018/136.pdf>.

   [Bleichenbacher16]
              Bleichenbacher, D., "Subject: AES-GCM-SIV security of the
              additional data", message to the cfrg mailing list, 24
              June 2016, <https://mailarchive.ietf.org/arch/msg/cfrg/
              qgh-Yxmj7CC7cq2YZLpmfGA3x-o>.

   [GCM]      Dworkin, M., "Recommendation for Block Cipher Modes of
              Operation: Galois/Counter Mode (GCM) and GMAC", NIST
              SP 800-38D, DOI 10.6028/NIST.SP.800-38D, November 2007,
              <https://csrc.nist.gov/publications/detail/sp/800-38d/
              final>.

   [GCM-SIV]  Gueron, S. and Y. Lindell, "GCM-SIV: Full Nonce Misuse-
              Resistant Authenticated Encryption at Under One Cycle Per
              Byte", Proceedings of the 22nd ACM SIGSAC Conference on
              Computer and Communications Security,
              DOI 10.1145/2810103.2813613, October 2015,
              <http://doi.acm.org/10.1145/2810103.2813613>.

   [key-derive]
              Gueron, S. and Y. Lindell, "Better Bounds for Block Cipher
              Modes of Operation via Nonce-Based Key Derivation",
              Proceedings of the 2017 ACM SIGSAC Conference on Computer
              and Communications Security, DOI 10.1145/3133956.3133992,
              2017, <https://doi.org/10.1145/3133956.3133992>.

   [multi-birthday]
              Suzuki, K., Tonien, D., Kurosawa, K., and K. Toyota,
              "Birthday Paradox for Multi-collisions", Information
              Security and Cryptology - ICISC 2006, Lecture Notes in
              Computer Science, Volume 4296, DOI 10.1007/11927587_5,
              2006, <http://dx.doi.org/10.1007/11927587_5>.

   [RFC3610]  Whiting, D., Housley, R., and N. Ferguson, "Counter with
              CBC-MAC (CCM)", RFC 3610, DOI 10.17487/RFC3610, September
              2003, <https://www.rfc-editor.org/info/rfc3610>.

   [RFC5116]  McGrew, D., "An Interface and Algorithms for Authenticated
              Encryption", RFC 5116, DOI 10.17487/RFC5116, January 2008,
              <https://www.rfc-editor.org/info/rfc5116>.

   [RFC5297]  Harkins, D., "Synthetic Initialization Vector (SIV)
              Authenticated Encryption Using the Advanced Encryption
              Standard (AES)", RFC 5297, DOI 10.17487/RFC5297, October
              2008, <https://www.rfc-editor.org/info/rfc5297>.

Appendix A.  The Relationship between POLYVAL and GHASH

EID 5854 (Verified) is as follows:

Section: Appendix A

Original Text:

...mulX_POLYVAL of it is 3931819bf271fada0503eb52574ca5f2.

Corrected Text:

...mulX_POLYVAL of it is 3931819bf271fada0503eb52574ca572.
Notes:
The last hex byte is typoed (f2, should be 72).

Confirmed this was the case on the CFRG mailing list (2019-09-05)
GHASH and POLYVAL both operate in GF(2^128), although with different irreducible polynomials: POLYVAL works modulo x^128 + x^127 + x^126 + x^121 + 1 and GHASH works modulo x^128 + x^7 + x^2 + x + 1. Note that these irreducible polynomials are the "reverse" of each other. GHASH also has a different mapping between 128-bit strings and field elements. Whereas POLYVAL takes the least significant to most significant bits of the first byte to be the coefficients of x^0 to x^7, GHASH takes them to be the coefficients of x^7 to x^0. This continues until, for the last byte, POLYVAL takes the least significant to most significant bits to be the coefficients of x^120 to x^127, while GHASH takes them to be the coefficients of x^127 to x^120. The combination of these facts means that it's possible to "convert" values between the two by reversing the order of the bytes in a 16-byte string. The differing interpretations of bit order takes care of reversing the bits within each byte, and then reversing the bytes does the rest. This may have a practical benefit for implementations that wish to implement both GHASH and POLYVAL. In order to be clear which field a given operation is performed in, let mulX_GHASH be a function that takes a 16-byte string, converts it to an element of GHASH's field using GHASH's convention, multiplies it by x, and converts it back to a string. Likewise, let mulX_POLYVAL be a function that converts a 16-byte string to an element of POLYVAL's field using POLYVAL's convention, multiplies it by x, and converts it back. Given the 16-byte string 01000000000000000000000000000000, mulX_GHASH of that string is 00800000000000000000000000000000 and mulX_POLYVAL of that string is 02000000000000000000000000000000. As a more general example, given 9c98c04df9387ded828175a92ba652d8, mulX_GHASH of that string is 4e4c6026fc9c3ef6c140bad495d3296c and mulX_POLYVAL of it is 3931819bf271fada0503eb52574ca5f2. Lastly, let ByteReverse be the function that takes a 16-byte string and returns a copy where the order of the bytes has been reversed. Now GHASH and POLYVAL can be defined in terms of one another: POLYVAL(H, X_1, ..., X_n) = ByteReverse(GHASH(mulX_GHASH(ByteReverse(H)), ByteReverse(X_1), ..., ByteReverse(X_n))) GHASH(H, X_1, ..., X_n) = ByteReverse(POLYVAL(mulX_POLYVAL(ByteReverse(H)), ByteReverse(X_1), ..., ByteReverse(X_n))) As a worked example: let H = 25629347589242761d31f826ba4b757b, X_1 = 4f4f95668c83dfb6401762bb2d01a262, and X_2 = d1a24ddd2721d006bbe45f20d3c9f362. POLYVAL(H, X_1, X_2) = f7a3b47b846119fae5b7866cf5e5b77e. If we wished to calculate this given only an implementation of GHASH, then the key for GHASH would be mulX_GHASH(ByteReverse(H)) = dcbaa5dd137c188ebb21492c23c9b112. Then ByteReverse(GHASH(dcba..., ByteReverse(X_1), ByteReverse(X_2))) = f7a3b47b846119fae5b7866cf5e5b77e, as required. In the other direction, GHASH(H, X_1, X_2) = bd9b3997046731fb96251b91f9c99d7a. If we wished to calculate this given only an implementation of POLYVAL, then we would first calculate the key for POLYVAL: mulX_POLYVAL(ByteReverse(H)) = f6ea96744df0633aec8424b18e26c54a. Then ByteReverse(POLYVAL(f6ea..., ByteReverse(X_1), ByteReverse(X_2))) = bd9b3997046731fb96251b91f9c99d7a. Appendix B. Additional Comparisons with AES-GCM Some functional properties that differ between AES-GCM and AES-GCM- SIV that are also worth noting: AES-GCM allows plaintexts to be encrypted in a streaming fashion -- i.e., the beginning of the plaintext can be encrypted and transmitted before the entire message has been processed. AES-GCM-SIV requires two passes for encryption and so cannot do this. AES-GCM allows a constant additional-data input to be precomputed in order to save per-message computation. AES-GCM-SIV varies the authenticator key based on the nonce and so does not permit this. The performance for AES-GCM versus AES-GCM-SIV on small machines can be roughly characterized by the number of AES operations and the number of GF(2^128) multiplications needed to process a message. Let a = (bytelen(additional-data) + 15) / 16 and p = (bytelen(plaintext) + 15) / 16. Then AES-GCM requires p + 1 AES operations and p + a + 1 field multiplications. Defined similarly, AES-GCM-SIV with AES-128 requires p + 5 AES operations and p + a + 1 field multiplications. With AES-256, that becomes p + 7 AES operations. With large machines, the available parallelism becomes far more important, and such simple performance analysis is no longer representative. For such machines, we find that decryption of AES- GCM-SIV is only about 5% slower than AES-GCM, as long as the message is at least a couple of kilobytes. Encryption tends to run about two-thirds the speed because of the additional pass required. Appendix C. Test Vectors C.1. AEAD_AES_128_GCM_SIV Plaintext (0 bytes) = AAD (0 bytes) = Key = 01000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = d9b360279694941ac5dbc6987ada7377 Record encryption key = 4004a0dcd862f2a57360219d2d44ef6c POLYVAL input = 00000000000000000000000000000000 POLYVAL result = 00000000000000000000000000000000 POLYVAL result XOR nonce = 03000000000000000000000000000000 ... and masked = 03000000000000000000000000000000 Tag = dc20e2d83f25705bb49e439eca56de25 Initial counter = dc20e2d83f25705bb49e439eca56dea5 Result (16 bytes) = dc20e2d83f25705bb49e439eca56de25 Plaintext (8 bytes) = 0100000000000000 AAD (0 bytes) = Key = 01000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = d9b360279694941ac5dbc6987ada7377 Record encryption key = 4004a0dcd862f2a57360219d2d44ef6c POLYVAL input = 01000000000000000000000000000000 00000000000000004000000000000000 POLYVAL result = eb93b7740962c5e49d2a90a7dc5cec74 POLYVAL result XOR nonce = e893b7740962c5e49d2a90a7dc5cec74 ... and masked = e893b7740962c5e49d2a90a7dc5cec74 Tag = 578782fff6013b815b287c22493a364c Initial counter = 578782fff6013b815b287c22493a36cc Result (24 bytes) = b5d839330ac7b786578782fff6013b81 5b287c22493a364c Plaintext (12 bytes) = 010000000000000000000000 AAD (0 bytes) = Key = 01000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = d9b360279694941ac5dbc6987ada7377 Record encryption key = 4004a0dcd862f2a57360219d2d44ef6c POLYVAL input = 01000000000000000000000000000000 00000000000000006000000000000000 POLYVAL result = 48eb6c6c5a2dbe4a1dde508fee06361b POLYVAL result XOR nonce = 4beb6c6c5a2dbe4a1dde508fee06361b ... and masked = 4beb6c6c5a2dbe4a1dde508fee06361b Tag = a4978db357391a0bc4fdec8b0d106639 Initial counter = a4978db357391a0bc4fdec8b0d1066b9 Result (28 bytes) = 7323ea61d05932260047d942a4978db3 57391a0bc4fdec8b0d106639 Plaintext (16 bytes) = 01000000000000000000000000000000 AAD (0 bytes) = Key = 01000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = d9b360279694941ac5dbc6987ada7377 Record encryption key = 4004a0dcd862f2a57360219d2d44ef6c POLYVAL input = 01000000000000000000000000000000 00000000000000008000000000000000 POLYVAL result = 20806c26e3c1de019e111255708031d6 POLYVAL result XOR nonce = 23806c26e3c1de019e111255708031d6 ... and masked = 23806c26e3c1de019e11125570803156 Tag = 303aaf90f6fe21199c6068577437a0c4 Initial counter = 303aaf90f6fe21199c6068577437a0c4 Result (32 bytes) = 743f7c8077ab25f8624e2e948579cf77 303aaf90f6fe21199c6068577437a0c4 Plaintext (32 bytes) = 01000000000000000000000000000000 02000000000000000000000000000000 AAD (0 bytes) = Key = 01000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = d9b360279694941ac5dbc6987ada7377 Record encryption key = 4004a0dcd862f2a57360219d2d44ef6c POLYVAL input = 01000000000000000000000000000000 02000000000000000000000000000000 00000000000000000001000000000000 POLYVAL result = ce6edc9a50b36d9a98986bbf6a261c3b POLYVAL result XOR nonce = cd6edc9a50b36d9a98986bbf6a261c3b ... and masked = cd6edc9a50b36d9a98986bbf6a261c3b Tag = 1a8e45dcd4578c667cd86847bf6155ff Initial counter = 1a8e45dcd4578c667cd86847bf6155ff Result (48 bytes) = 84e07e62ba83a6585417245d7ec413a9 fe427d6315c09b57ce45f2e3936a9445 1a8e45dcd4578c667cd86847bf6155ff Plaintext (48 bytes) = 01000000000000000000000000000000 02000000000000000000000000000000 03000000000000000000000000000000 AAD (0 bytes) = Key = 01000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = d9b360279694941ac5dbc6987ada7377 Record encryption key = 4004a0dcd862f2a57360219d2d44ef6c POLYVAL input = 01000000000000000000000000000000 02000000000000000000000000000000 03000000000000000000000000000000 00000000000000008001000000000000 POLYVAL result = 81388746bc22d26b2abc3dcb15754222 POLYVAL result XOR nonce = 82388746bc22d26b2abc3dcb15754222 ... and masked = 82388746bc22d26b2abc3dcb15754222 Tag = 5e6e311dbf395d35b0fe39c2714388f8 Initial counter = 5e6e311dbf395d35b0fe39c2714388f8 Result (64 bytes) = 3fd24ce1f5a67b75bf2351f181a475c7 b800a5b4d3dcf70106b1eea82fa1d64d f42bf7226122fa92e17a40eeaac1201b 5e6e311dbf395d35b0fe39c2714388f8 Plaintext (64 bytes) = 01000000000000000000000000000000 02000000000000000000000000000000 03000000000000000000000000000000 04000000000000000000000000000000 AAD (0 bytes) = Key = 01000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = d9b360279694941ac5dbc6987ada7377 Record encryption key = 4004a0dcd862f2a57360219d2d44ef6c POLYVAL input = 01000000000000000000000000000000 02000000000000000000000000000000 03000000000000000000000000000000 04000000000000000000000000000000 00000000000000000002000000000000 POLYVAL result = 1e39b6d3344d348f6044f89935d1cf78 POLYVAL result XOR nonce = 1d39b6d3344d348f6044f89935d1cf78 ... and masked = 1d39b6d3344d348f6044f89935d1cf78 Tag = 8a263dd317aa88d56bdf3936dba75bb8 Initial counter = 8a263dd317aa88d56bdf3936dba75bb8 Result (80 bytes) = 2433668f1058190f6d43e360f4f35cd8 e475127cfca7028ea8ab5c20f7ab2af0 2516a2bdcbc08d521be37ff28c152bba 36697f25b4cd169c6590d1dd39566d3f 8a263dd317aa88d56bdf3936dba75bb8 Plaintext (8 bytes) = 0200000000000000 AAD (1 bytes) = 01 Key = 01000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = d9b360279694941ac5dbc6987ada7377 Record encryption key = 4004a0dcd862f2a57360219d2d44ef6c POLYVAL input = 01000000000000000000000000000000 02000000000000000000000000000000 08000000000000004000000000000000 POLYVAL result = b26781e7e2c1376f96bec195f3709b2a POLYVAL result XOR nonce = b16781e7e2c1376f96bec195f3709b2a ... and masked = b16781e7e2c1376f96bec195f3709b2a Tag = 3b0a1a2560969cdf790d99759abd1508 Initial counter = 3b0a1a2560969cdf790d99759abd1588 Result (24 bytes) = 1e6daba35669f4273b0a1a2560969cdf 790d99759abd1508 Plaintext (12 bytes) = 020000000000000000000000 AAD (1 bytes) = 01 Key = 01000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = d9b360279694941ac5dbc6987ada7377 Record encryption key = 4004a0dcd862f2a57360219d2d44ef6c POLYVAL input = 01000000000000000000000000000000 02000000000000000000000000000000 08000000000000006000000000000000 POLYVAL result = 111f5affb18e4cc1164a01bdc12a4145 POLYVAL result XOR nonce = 121f5affb18e4cc1164a01bdc12a4145 ... and masked = 121f5affb18e4cc1164a01bdc12a4145 Tag = 08299c5102745aaa3a0c469fad9e075a Initial counter = 08299c5102745aaa3a0c469fad9e07da Result (28 bytes) = 296c7889fd99f41917f4462008299c51 02745aaa3a0c469fad9e075a Plaintext (16 bytes) = 02000000000000000000000000000000 AAD (1 bytes) = 01 Key = 01000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = d9b360279694941ac5dbc6987ada7377 Record encryption key = 4004a0dcd862f2a57360219d2d44ef6c POLYVAL input = 01000000000000000000000000000000 02000000000000000000000000000000 08000000000000008000000000000000 POLYVAL result = 79745ab508622c8a958543675fac4688 POLYVAL result XOR nonce = 7a745ab508622c8a958543675fac4688 ... and masked = 7a745ab508622c8a958543675fac4608 Tag = 8f8936ec039e4e4bb97ebd8c4457441f Initial counter = 8f8936ec039e4e4bb97ebd8c4457449f Result (32 bytes) = e2b0c5da79a901c1745f700525cb335b 8f8936ec039e4e4bb97ebd8c4457441f Plaintext (32 bytes) = 02000000000000000000000000000000 03000000000000000000000000000000 AAD (1 bytes) = 01 Key = 01000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = d9b360279694941ac5dbc6987ada7377 Record encryption key = 4004a0dcd862f2a57360219d2d44ef6c POLYVAL input = 01000000000000000000000000000000 02000000000000000000000000000000 03000000000000000000000000000000 08000000000000000001000000000000 POLYVAL result = 2ce7daaf7c89490822051255b12eca6b POLYVAL result XOR nonce = 2fe7daaf7c89490822051255b12eca6b ... and masked = 2fe7daaf7c89490822051255b12eca6b Tag = e6af6a7f87287da059a71684ed3498e1 Initial counter = e6af6a7f87287da059a71684ed3498e1 Result (48 bytes) = 620048ef3c1e73e57e02bb8562c416a3 19e73e4caac8e96a1ecb2933145a1d71 e6af6a7f87287da059a71684ed3498e1 Plaintext (48 bytes) = 02000000000000000000000000000000 03000000000000000000000000000000 04000000000000000000000000000000 AAD (1 bytes) = 01 Key = 01000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = d9b360279694941ac5dbc6987ada7377 Record encryption key = 4004a0dcd862f2a57360219d2d44ef6c POLYVAL input = 01000000000000000000000000000000 02000000000000000000000000000000 03000000000000000000000000000000 04000000000000000000000000000000 08000000000000008001000000000000 POLYVAL result = 9ca987715d69c1786711dfcd22f830fc POLYVAL result XOR nonce = 9fa987715d69c1786711dfcd22f830fc ... and masked = 9fa987715d69c1786711dfcd22f8307c Tag = 6a8cc3865f76897c2e4b245cf31c51f2 Initial counter = 6a8cc3865f76897c2e4b245cf31c51f2 Result (64 bytes) = 50c8303ea93925d64090d07bd109dfd9 515a5a33431019c17d93465999a8b005 3201d723120a8562b838cdff25bf9d1e 6a8cc3865f76897c2e4b245cf31c51f2 Plaintext (64 bytes) = 02000000000000000000000000000000 03000000000000000000000000000000 04000000000000000000000000000000 05000000000000000000000000000000 AAD (1 bytes) = 01 Key = 01000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = d9b360279694941ac5dbc6987ada7377 Record encryption key = 4004a0dcd862f2a57360219d2d44ef6c POLYVAL input = 01000000000000000000000000000000 02000000000000000000000000000000 03000000000000000000000000000000 04000000000000000000000000000000 05000000000000000000000000000000 08000000000000000002000000000000 POLYVAL result = ffcd05d5770f34ad9267f0a59994b15a POLYVAL result XOR nonce = fccd05d5770f34ad9267f0a59994b15a ... and masked = fccd05d5770f34ad9267f0a59994b15a Tag = cdc46ae475563de037001ef84ae21744 Initial counter = cdc46ae475563de037001ef84ae217c4 Result (80 bytes) = 2f5c64059db55ee0fb847ed513003746 aca4e61c711b5de2e7a77ffd02da42fe ec601910d3467bb8b36ebbaebce5fba3 0d36c95f48a3e7980f0e7ac299332a80 cdc46ae475563de037001ef84ae21744 Plaintext (4 bytes) = 02000000 AAD (12 bytes) = 010000000000000000000000 Key = 01000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = d9b360279694941ac5dbc6987ada7377 Record encryption key = 4004a0dcd862f2a57360219d2d44ef6c POLYVAL input = 01000000000000000000000000000000 02000000000000000000000000000000 60000000000000002000000000000000 POLYVAL result = f6ce9d3dcd68a2fd603c7ecc18fb9918 POLYVAL result XOR nonce = f5ce9d3dcd68a2fd603c7ecc18fb9918 ... and masked = f5ce9d3dcd68a2fd603c7ecc18fb9918 Tag = 07eb1f84fb28f8cb73de8e99e2f48a14 Initial counter = 07eb1f84fb28f8cb73de8e99e2f48a94 Result (20 bytes) = a8fe3e8707eb1f84fb28f8cb73de8e99 e2f48a14 Plaintext (20 bytes) = 03000000000000000000000000000000 04000000 AAD (18 bytes) = 01000000000000000000000000000000 0200 Key = 01000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = d9b360279694941ac5dbc6987ada7377 Record encryption key = 4004a0dcd862f2a57360219d2d44ef6c POLYVAL input = 01000000000000000000000000000000 02000000000000000000000000000000 03000000000000000000000000000000 04000000000000000000000000000000 9000000000000000a000000000000000 POLYVAL result = 4781d492cb8f926c504caa36f61008fe POLYVAL result XOR nonce = 4481d492cb8f926c504caa36f61008fe ... and masked = 4481d492cb8f926c504caa36f610087e Tag = 24afc9805e976f451e6d87f6fe106514 Initial counter = 24afc9805e976f451e6d87f6fe106594 Result (36 bytes) = 6bb0fecf5ded9b77f902c7d5da236a43 91dd029724afc9805e976f451e6d87f6 fe106514 Plaintext (18 bytes) = 03000000000000000000000000000000 0400 AAD (20 bytes) = 01000000000000000000000000000000 02000000 Key = 01000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = d9b360279694941ac5dbc6987ada7377 Record encryption key = 4004a0dcd862f2a57360219d2d44ef6c POLYVAL input = 01000000000000000000000000000000 02000000000000000000000000000000 03000000000000000000000000000000 04000000000000000000000000000000 a0000000000000009000000000000000 POLYVAL result = 75cbc23a1a10e348aeb8e384b5cc79fd POLYVAL result XOR nonce = 76cbc23a1a10e348aeb8e384b5cc79fd ... and masked = 76cbc23a1a10e348aeb8e384b5cc797d Tag = bff9b2ef00fb47920cc72a0c0f13b9fd Initial counter = bff9b2ef00fb47920cc72a0c0f13b9fd Result (34 bytes) = 44d0aaf6fb2f1f34add5e8064e83e12a 2adabff9b2ef00fb47920cc72a0c0f13 b9fd Plaintext (0 bytes) = AAD (0 bytes) = Key = e66021d5eb8e4f4066d4adb9c33560e4 Nonce = f46e44bb3da0015c94f70887 Record authentication key = 036ee1fe2d7926af68898095e54e7b3c Record encryption key = 5e46482396008223b5c1d25173d87539 POLYVAL input = 00000000000000000000000000000000 POLYVAL result = 00000000000000000000000000000000 POLYVAL result XOR nonce = f46e44bb3da0015c94f7088700000000 ... and masked = f46e44bb3da0015c94f7088700000000 Tag = a4194b79071b01a87d65f706e3949578 Initial counter = a4194b79071b01a87d65f706e39495f8 Result (16 bytes) = a4194b79071b01a87d65f706e3949578 Plaintext (3 bytes) = 7a806c AAD (5 bytes) = 46bb91c3c5 Key = 36864200e0eaf5284d884a0e77d31646 Nonce = bae8e37fc83441b16034566b Record authentication key = 3e28de1120b2981a0155795ca2812af6 Record encryption key = 6d4b78b31a4c9c03d8db0f42f7507fae POLYVAL input = 46bb91c3c50000000000000000000000 7a806c00000000000000000000000000 28000000000000001800000000000000 POLYVAL result = 43d9a745511dcfa21b96dd606f1d5720 POLYVAL result XOR nonce = f931443a99298e137ba28b0b6f1d5720 ... and masked = f931443a99298e137ba28b0b6f1d5720 Tag = 711bd85bc1e4d3e0a462e074eea428a8 Initial counter = 711bd85bc1e4d3e0a462e074eea428a8 Result (19 bytes) = af60eb711bd85bc1e4d3e0a462e074ee a428a8 Plaintext (6 bytes) = bdc66f146545 AAD (10 bytes) = fc880c94a95198874296 Key = aedb64a6c590bc84d1a5e269e4b47801 Nonce = afc0577e34699b9e671fdd4f Record authentication key = 43b8de9cea62330d15cccfc84a33e8c8 Record encryption key = 8e54631607e431e095b54852868e3a27 POLYVAL input = fc880c94a95198874296000000000000 bdc66f14654500000000000000000000 50000000000000003000000000000000 POLYVAL result = 26498e0d2b1ef004e808c458e8f2f515 POLYVAL result XOR nonce = 8989d9731f776b9a8f171917e8f2f515 ... and masked = 8989d9731f776b9a8f171917e8f2f515 Tag = d6a9c45545cfc11f03ad743dba20f966 Initial counter = d6a9c45545cfc11f03ad743dba20f9e6 Result (22 bytes) = bb93a3e34d3cd6a9c45545cfc11f03ad 743dba20f966 Plaintext (9 bytes) = 1177441f195495860f AAD (15 bytes) = 046787f3ea22c127aaf195d1894728 Key = d5cc1fd161320b6920ce07787f86743b Nonce = 275d1ab32f6d1f0434d8848c Record authentication key = 8a51df64d93eaf667c2c09bd454ce5c5 Record encryption key = 43ab276c2b4a473918ca73f2dd85109c POLYVAL input = 046787f3ea22c127aaf195d189472800 1177441f195495860f00000000000000 78000000000000004800000000000000 POLYVAL result = 63a3451c0b23345ad02bba59956517cf POLYVAL result XOR nonce = 44fe5faf244e2b5ee4f33ed5956517cf ... and masked = 44fe5faf244e2b5ee4f33ed59565174f Tag = 1d02fd0cd174c84fc5dae2f60f52fd2b Initial counter = 1d02fd0cd174c84fc5dae2f60f52fdab Result (25 bytes) = 4f37281f7ad12949d01d02fd0cd174c8 4fc5dae2f60f52fd2b Plaintext (12 bytes) = 9f572c614b4745914474e7c7 AAD (20 bytes) = c9882e5386fd9f92ec489c8fde2be2cf 97e74e93 Key = b3fed1473c528b8426a582995929a149 Nonce = 9e9ad8780c8d63d0ab4149c0 Record authentication key = 22f50707a95dd416df069d670cb775e8 Record encryption key = f674a5584ee21fe97b4cebc468ab61e4 POLYVAL input = c9882e5386fd9f92ec489c8fde2be2cf 97e74e93000000000000000000000000 9f572c614b4745914474e7c700000000 a0000000000000006000000000000000 POLYVAL result = 0cca0423fba9d77fe7e2e6963b08cdd0 POLYVAL result XOR nonce = 9250dc5bf724b4af4ca3af563b08cdd0 ... and masked = 9250dc5bf724b4af4ca3af563b08cd50 Tag = c1dc2f871fb7561da1286e655e24b7b0 Initial counter = c1dc2f871fb7561da1286e655e24b7b0 Result (28 bytes) = f54673c5ddf710c745641c8bc1dc2f87 1fb7561da1286e655e24b7b0 Plaintext (15 bytes) = 0d8c8451178082355c9e940fea2f58 AAD (25 bytes) = 2950a70d5a1db2316fd568378da107b5 2b0da55210cc1c1b0a Key = 2d4ed87da44102952ef94b02b805249b Nonce = ac80e6f61455bfac8308a2d4 Record authentication key = 0b00a29a83e7e95b92e3a0783b29f140 Record encryption key = a430c27f285aed913005975c42eed5f3 POLYVAL input = 2950a70d5a1db2316fd568378da107b5 2b0da55210cc1c1b0a00000000000000 0d8c8451178082355c9e940fea2f5800 c8000000000000007800000000000000 POLYVAL result = 1086ef25247aa41009bbc40871d9b350 POLYVAL result XOR nonce = bc0609d3302f1bbc8ab366dc71d9b350 ... and masked = bc0609d3302f1bbc8ab366dc71d9b350 Tag = 83b3449b9f39552de99dc214a1190b0b Initial counter = 83b3449b9f39552de99dc214a1190b8b Result (31 bytes) = c9ff545e07b88a015f05b274540aa183 b3449b9f39552de99dc214a1190b0b Plaintext (18 bytes) = 6b3db4da3d57aa94842b9803a96e07fb 6de7 AAD (30 bytes) = 1860f762ebfbd08284e421702de0de18 baa9c9596291b08466f37de21c7f Key = bde3b2f204d1e9f8b06bc47f9745b3d1 Nonce = ae06556fb6aa7890bebc18fe Record authentication key = 21c874a8bad3603d1c3e8784df5b3f9f Record encryption key = d1c16d72651c3df504eae27129d818e8 POLYVAL input = 1860f762ebfbd08284e421702de0de18 baa9c9596291b08466f37de21c7f0000 6b3db4da3d57aa94842b9803a96e07fb 6de70000000000000000000000000000 f0000000000000009000000000000000 POLYVAL result = 55462a5afa0da8d646481e049ef9c764 POLYVAL result XOR nonce = fb407f354ca7d046f8f406fa9ef9c764 ... and masked = fb407f354ca7d046f8f406fa9ef9c764 Tag = 3e377094f04709f64d7b985310a4db84 Initial counter = 3e377094f04709f64d7b985310a4db84 Result (34 bytes) = 6298b296e24e8cc35dce0bed484b7f30 d5803e377094f04709f64d7b985310a4 db84 Plaintext (21 bytes) = e42a3c02c25b64869e146d7b233987bd dfc240871d AAD (35 bytes) = 7576f7028ec6eb5ea7e298342a94d4b2 02b370ef9768ec6561c4fe6b7e7296fa 859c21 Key = f901cfe8a69615a93fdf7a98cad48179 Nonce = 6245709fb18853f68d833640 Record authentication key = 3724f55f1d22ac0ab830da0b6a995d74 Record encryption key = 75ac87b70c05db287de779006105a344 POLYVAL input = 7576f7028ec6eb5ea7e298342a94d4b2 02b370ef9768ec6561c4fe6b7e7296fa 859c2100000000000000000000000000 e42a3c02c25b64869e146d7b233987bd dfc240871d0000000000000000000000 1801000000000000a800000000000000 POLYVAL result = 4cbba090f03f7d1188ea55749fa6c7bd POLYVAL result XOR nonce = 2efed00f41b72ee7056963349fa6c7bd ... and masked = 2efed00f41b72ee7056963349fa6c73d Tag = 2d15506c84a9edd65e13e9d24a2a6e70 Initial counter = 2d15506c84a9edd65e13e9d24a2a6ef0 Result (37 bytes) = 391cc328d484a4f46406181bcd62efd9 b3ee197d052d15506c84a9edd65e13e9 d24a2a6e70 C.2. AEAD_AES_256_GCM_SIV Plaintext (0 bytes) = AAD (0 bytes) = Key = 01000000000000000000000000000000 00000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = b5d3c529dfafac43136d2d11be284d7f Record encryption key = b914f4742be9e1d7a2f84addbf96dec3 456e3c6c05ecc157cdbf0700fedad222 POLYVAL input = 00000000000000000000000000000000 POLYVAL result = 00000000000000000000000000000000 POLYVAL result XOR nonce = 03000000000000000000000000000000 ... and masked = 03000000000000000000000000000000 Tag = 07f5f4169bbf55a8400cd47ea6fd400f Initial counter = 07f5f4169bbf55a8400cd47ea6fd408f Result (16 bytes) = 07f5f4169bbf55a8400cd47ea6fd400f Plaintext (8 bytes) = 0100000000000000 AAD (0 bytes) = Key = 01000000000000000000000000000000 00000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = b5d3c529dfafac43136d2d11be284d7f Record encryption key = b914f4742be9e1d7a2f84addbf96dec3 456e3c6c05ecc157cdbf0700fedad222 POLYVAL input = 01000000000000000000000000000000 00000000000000004000000000000000 POLYVAL result = 05230f62f0eac8aa14fe4d646b59cd41 POLYVAL result XOR nonce = 06230f62f0eac8aa14fe4d646b59cd41 ... and masked = 06230f62f0eac8aa14fe4d646b59cd41 Tag = 843122130f7364b761e0b97427e3df28 Initial counter = 843122130f7364b761e0b97427e3dfa8 Result (24 bytes) = c2ef328e5c71c83b843122130f7364b7 61e0b97427e3df28 Plaintext (12 bytes) = 010000000000000000000000 AAD (0 bytes) = Key = 01000000000000000000000000000000 00000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = b5d3c529dfafac43136d2d11be284d7f Record encryption key = b914f4742be9e1d7a2f84addbf96dec3 456e3c6c05ecc157cdbf0700fedad222 POLYVAL input = 01000000000000000000000000000000 00000000000000006000000000000000 POLYVAL result = 6d81a24732fd6d03ae5af544720a1c13 POLYVAL result XOR nonce = 6e81a24732fd6d03ae5af544720a1c13 ... and masked = 6e81a24732fd6d03ae5af544720a1c13 Tag = 8ca50da9ae6559e48fd10f6e5c9ca17e Initial counter = 8ca50da9ae6559e48fd10f6e5c9ca1fe Result (28 bytes) = 9aab2aeb3faa0a34aea8e2b18ca50da9 ae6559e48fd10f6e5c9ca17e Plaintext (16 bytes) = 01000000000000000000000000000000 AAD (0 bytes) = Key = 01000000000000000000000000000000 00000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = b5d3c529dfafac43136d2d11be284d7f Record encryption key = b914f4742be9e1d7a2f84addbf96dec3 456e3c6c05ecc157cdbf0700fedad222 POLYVAL input = 01000000000000000000000000000000 00000000000000008000000000000000 POLYVAL result = 74eee2bf7c9a165f8b25dea73db32a6d POLYVAL result XOR nonce = 77eee2bf7c9a165f8b25dea73db32a6d ... and masked = 77eee2bf7c9a165f8b25dea73db32a6d Tag = c9eac6fa700942702e90862383c6c366 Initial counter = c9eac6fa700942702e90862383c6c3e6 Result (32 bytes) = 85a01b63025ba19b7fd3ddfc033b3e76 c9eac6fa700942702e90862383c6c366 Plaintext (32 bytes) = 01000000000000000000000000000000 02000000000000000000000000000000 AAD (0 bytes) = Key = 01000000000000000000000000000000 00000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = b5d3c529dfafac43136d2d11be284d7f Record encryption key = b914f4742be9e1d7a2f84addbf96dec3 456e3c6c05ecc157cdbf0700fedad222 POLYVAL input = 01000000000000000000000000000000 02000000000000000000000000000000 00000000000000000001000000000000 POLYVAL result = 899b6381b3d46f0def7aa0517ba188f5 POLYVAL result XOR nonce = 8a9b6381b3d46f0def7aa0517ba188f5 ... and masked = 8a9b6381b3d46f0def7aa0517ba18875 Tag = e819e63abcd020b006a976397632eb5d Initial counter = e819e63abcd020b006a976397632ebdd Result (48 bytes) = 4a6a9db4c8c6549201b9edb53006cba8 21ec9cf850948a7c86c68ac7539d027f e819e63abcd020b006a976397632eb5d Plaintext (48 bytes) = 01000000000000000000000000000000 02000000000000000000000000000000 03000000000000000000000000000000 AAD (0 bytes) = Key = 01000000000000000000000000000000 00000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = b5d3c529dfafac43136d2d11be284d7f Record encryption key = b914f4742be9e1d7a2f84addbf96dec3 456e3c6c05ecc157cdbf0700fedad222 POLYVAL input = 01000000000000000000000000000000 02000000000000000000000000000000 03000000000000000000000000000000 00000000000000008001000000000000 POLYVAL result = c1f8593d8fc29b0c290cae1992f71f51 POLYVAL result XOR nonce = c2f8593d8fc29b0c290cae1992f71f51 ... and masked = c2f8593d8fc29b0c290cae1992f71f51 Tag = 790bc96880a99ba804bd12c0e6a22cc4 Initial counter = 790bc96880a99ba804bd12c0e6a22cc4 Result (64 bytes) = c00d121893a9fa603f48ccc1ca3c57ce 7499245ea0046db16c53c7c66fe717e3 9cf6c748837b61f6ee3adcee17534ed5 790bc96880a99ba804bd12c0e6a22cc4 Plaintext (64 bytes) = 01000000000000000000000000000000 02000000000000000000000000000000 03000000000000000000000000000000 04000000000000000000000000000000 AAD (0 bytes) = Key = 01000000000000000000000000000000 00000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = b5d3c529dfafac43136d2d11be284d7f Record encryption key = b914f4742be9e1d7a2f84addbf96dec3 456e3c6c05ecc157cdbf0700fedad222 POLYVAL input = 01000000000000000000000000000000 02000000000000000000000000000000 03000000000000000000000000000000 04000000000000000000000000000000 00000000000000000002000000000000 POLYVAL result = 6ef38b06046c7c0e225efaef8e2ec4c4 POLYVAL result XOR nonce = 6df38b06046c7c0e225efaef8e2ec4c4 ... and masked = 6df38b06046c7c0e225efaef8e2ec444 Tag = 112864c269fc0d9d88c61fa47e39aa08 Initial counter = 112864c269fc0d9d88c61fa47e39aa88 Result (80 bytes) = c2d5160a1f8683834910acdafc41fbb1 632d4a353e8b905ec9a5499ac34f96c7 e1049eb080883891a4db8caaa1f99dd0 04d80487540735234e3744512c6f90ce 112864c269fc0d9d88c61fa47e39aa08 Plaintext (8 bytes) = 0200000000000000 AAD (1 bytes) = 01 Key = 01000000000000000000000000000000 00000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = b5d3c529dfafac43136d2d11be284d7f Record encryption key = b914f4742be9e1d7a2f84addbf96dec3 456e3c6c05ecc157cdbf0700fedad222 POLYVAL input = 01000000000000000000000000000000 02000000000000000000000000000000 08000000000000004000000000000000 POLYVAL result = 34e57bafe011b9b36fc6821b7ffb3354 POLYVAL result XOR nonce = 37e57bafe011b9b36fc6821b7ffb3354 ... and masked = 37e57bafe011b9b36fc6821b7ffb3354 Tag = 91213f267e3b452f02d01ae33e4ec854 Initial counter = 91213f267e3b452f02d01ae33e4ec8d4 Result (24 bytes) = 1de22967237a813291213f267e3b452f 02d01ae33e4ec854 Plaintext (12 bytes) = 020000000000000000000000 AAD (1 bytes) = 01 Key = 01000000000000000000000000000000 00000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = b5d3c529dfafac43136d2d11be284d7f Record encryption key = b914f4742be9e1d7a2f84addbf96dec3 456e3c6c05ecc157cdbf0700fedad222 POLYVAL input = 01000000000000000000000000000000 02000000000000000000000000000000 08000000000000006000000000000000 POLYVAL result = 5c47d68a22061c1ad5623a3b66a8e206 POLYVAL result XOR nonce = 5f47d68a22061c1ad5623a3b66a8e206 ... and masked = 5f47d68a22061c1ad5623a3b66a8e206 Tag = c1a4a19ae800941ccdc57cc8413c277f Initial counter = c1a4a19ae800941ccdc57cc8413c27ff Result (28 bytes) = 163d6f9cc1b346cd453a2e4cc1a4a19a e800941ccdc57cc8413c277f Plaintext (16 bytes) = 02000000000000000000000000000000 AAD (1 bytes) = 01 Key = 01000000000000000000000000000000 00000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = b5d3c529dfafac43136d2d11be284d7f Record encryption key = b914f4742be9e1d7a2f84addbf96dec3 456e3c6c05ecc157cdbf0700fedad222 POLYVAL input = 01000000000000000000000000000000 02000000000000000000000000000000 08000000000000008000000000000000 POLYVAL result = 452896726c616746f01d11d82911d478 POLYVAL result XOR nonce = 462896726c616746f01d11d82911d478 ... and masked = 462896726c616746f01d11d82911d478 Tag = b292d28ff61189e8e49f3875ef91aff7 Initial counter = b292d28ff61189e8e49f3875ef91aff7 Result (32 bytes) = c91545823cc24f17dbb0e9e807d5ec17 b292d28ff61189e8e49f3875ef91aff7 Plaintext (32 bytes) = 02000000000000000000000000000000 03000000000000000000000000000000 AAD (1 bytes) = 01 Key = 01000000000000000000000000000000 00000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = b5d3c529dfafac43136d2d11be284d7f Record encryption key = b914f4742be9e1d7a2f84addbf96dec3 456e3c6c05ecc157cdbf0700fedad222 POLYVAL input = 01000000000000000000000000000000 02000000000000000000000000000000 03000000000000000000000000000000 08000000000000000001000000000000 POLYVAL result = 4e58c1e341c9bb0ae34eda9509dfc90c POLYVAL result XOR nonce = 4d58c1e341c9bb0ae34eda9509dfc90c ... and masked = 4d58c1e341c9bb0ae34eda9509dfc90c Tag = aea1bad12702e1965604374aab96dbbc Initial counter = aea1bad12702e1965604374aab96dbbc Result (48 bytes) = 07dad364bfc2b9da89116d7bef6daaaf 6f255510aa654f920ac81b94e8bad365 aea1bad12702e1965604374aab96dbbc Plaintext (48 bytes) = 02000000000000000000000000000000 03000000000000000000000000000000 04000000000000000000000000000000 AAD (1 bytes) = 01 Key = 01000000000000000000000000000000 00000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = b5d3c529dfafac43136d2d11be284d7f Record encryption key = b914f4742be9e1d7a2f84addbf96dec3 456e3c6c05ecc157cdbf0700fedad222 POLYVAL input = 01000000000000000000000000000000 02000000000000000000000000000000 03000000000000000000000000000000 04000000000000000000000000000000 08000000000000008001000000000000 POLYVAL result = 2566a4aff9a525df9772c16d4eaf8d2a POLYVAL result XOR nonce = 2666a4aff9a525df9772c16d4eaf8d2a ... and masked = 2666a4aff9a525df9772c16d4eaf8d2a Tag = 03332742b228c647173616cfd44c54eb Initial counter = 03332742b228c647173616cfd44c54eb Result (64 bytes) = c67a1f0f567a5198aa1fcc8e3f213143 36f7f51ca8b1af61feac35a86416fa47 fbca3b5f749cdf564527f2314f42fe25 03332742b228c647173616cfd44c54eb Plaintext (64 bytes) = 02000000000000000000000000000000 03000000000000000000000000000000 04000000000000000000000000000000 05000000000000000000000000000000 AAD (1 bytes) = 01 Key = 01000000000000000000000000000000 00000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = b5d3c529dfafac43136d2d11be284d7f Record encryption key = b914f4742be9e1d7a2f84addbf96dec3 456e3c6c05ecc157cdbf0700fedad222 POLYVAL input = 01000000000000000000000000000000 02000000000000000000000000000000 03000000000000000000000000000000 04000000000000000000000000000000 05000000000000000000000000000000 08000000000000000002000000000000 POLYVAL result = da58d2f61b0a9d343b2f37fb0c519733 POLYVAL result XOR nonce = d958d2f61b0a9d343b2f37fb0c519733 ... and masked = d958d2f61b0a9d343b2f37fb0c519733 Tag = 5bde0285037c5de81e5b570a049b62a0 Initial counter = 5bde0285037c5de81e5b570a049b62a0 Result (80 bytes) = 67fd45e126bfb9a79930c43aad2d3696 7d3f0e4d217c1e551f59727870beefc9 8cb933a8fce9de887b1e40799988db1f c3f91880ed405b2dd298318858467c89 5bde0285037c5de81e5b570a049b62a0 Plaintext (4 bytes) = 02000000 AAD (12 bytes) = 010000000000000000000000 Key = 01000000000000000000000000000000 00000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = b5d3c529dfafac43136d2d11be284d7f Record encryption key = b914f4742be9e1d7a2f84addbf96dec3 456e3c6c05ecc157cdbf0700fedad222 POLYVAL input = 01000000000000000000000000000000 02000000000000000000000000000000 60000000000000002000000000000000 POLYVAL result = 6dc76ae84b88916e073a303aafde05cf POLYVAL result XOR nonce = 6ec76ae84b88916e073a303aafde05cf ... and masked = 6ec76ae84b88916e073a303aafde054f Tag = 1835e517741dfddccfa07fa4661b74cf Initial counter = 1835e517741dfddccfa07fa4661b74cf Result (20 bytes) = 22b3f4cd1835e517741dfddccfa07fa4 661b74cf Plaintext (20 bytes) = 03000000000000000000000000000000 04000000 AAD (18 bytes) = 01000000000000000000000000000000 0200 Key = 01000000000000000000000000000000 00000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = b5d3c529dfafac43136d2d11be284d7f Record encryption key = b914f4742be9e1d7a2f84addbf96dec3 456e3c6c05ecc157cdbf0700fedad222 POLYVAL input = 01000000000000000000000000000000 02000000000000000000000000000000 03000000000000000000000000000000 04000000000000000000000000000000 9000000000000000a000000000000000 POLYVAL result = 973ef4fd04bd31d193816ab26f8655ca POLYVAL result XOR nonce = 943ef4fd04bd31d193816ab26f8655ca ... and masked = 943ef4fd04bd31d193816ab26f86554a Tag = b879ad976d8242acc188ab59cabfe307 Initial counter = b879ad976d8242acc188ab59cabfe387 Result (36 bytes) = 43dd0163cdb48f9fe3212bf61b201976 067f342bb879ad976d8242acc188ab59 cabfe307 Plaintext (18 bytes) = 03000000000000000000000000000000 0400 AAD (20 bytes) = 01000000000000000000000000000000 02000000 Key = 01000000000000000000000000000000 00000000000000000000000000000000 Nonce = 030000000000000000000000 Record authentication key = b5d3c529dfafac43136d2d11be284d7f Record encryption key = b914f4742be9e1d7a2f84addbf96dec3 456e3c6c05ecc157cdbf0700fedad222 POLYVAL input = 01000000000000000000000000000000 02000000000000000000000000000000 03000000000000000000000000000000 04000000000000000000000000000000 a0000000000000009000000000000000 POLYVAL result = 2cbb6b7ab2dbffefb797f825f826870c POLYVAL result XOR nonce = 2fbb6b7ab2dbffefb797f825f826870c ... and masked = 2fbb6b7ab2dbffefb797f825f826870c Tag = cfcdf5042112aa29685c912fc2056543 Initial counter = cfcdf5042112aa29685c912fc20565c3 Result (34 bytes) = 462401724b5ce6588d5a54aae5375513 a075cfcdf5042112aa29685c912fc205 6543 Plaintext (0 bytes) = AAD (0 bytes) = Key = e66021d5eb8e4f4066d4adb9c33560e4 f46e44bb3da0015c94f7088736864200 Nonce = e0eaf5284d884a0e77d31646 Record authentication key = e40d26f82774aa27f47b047b608b9585 Record encryption key = 7c7c3d9a542cef53dde0e6de9b580040 0f82e73ec5f7ee41b7ba8dcb9ba078c3 POLYVAL input = 00000000000000000000000000000000 POLYVAL result = 00000000000000000000000000000000 POLYVAL result XOR nonce = e0eaf5284d884a0e77d3164600000000 ... and masked = e0eaf5284d884a0e77d3164600000000 Tag = 169fbb2fbf389a995f6390af22228a62 Initial counter = 169fbb2fbf389a995f6390af22228ae2 Result (16 bytes) = 169fbb2fbf389a995f6390af22228a62 Plaintext (3 bytes) = 671fdd AAD (5 bytes) = 4fbdc66f14 Key = bae8e37fc83441b16034566b7a806c46 bb91c3c5aedb64a6c590bc84d1a5e269 Nonce = e4b47801afc0577e34699b9e Record authentication key = b546f5a850d0a90adfe39e95c2510fc6 Record encryption key = b9d1e239d62cbb5c49273ddac8838bdc c53bca478a770f07087caa4e0a924a55 POLYVAL input = 4fbdc66f140000000000000000000000 671fdd00000000000000000000000000 28000000000000001800000000000000 POLYVAL result = b91f91f96b159a7c611c05035b839e92 POLYVAL result XOR nonce = 5dabe9f8c4d5cd0255759e9d5b839e92 ... and masked = 5dabe9f8c4d5cd0255759e9d5b839e12 Tag = 93da9bb81333aee0c785b240d319719d Initial counter = 93da9bb81333aee0c785b240d319719d Result (19 bytes) = 0eaccb93da9bb81333aee0c785b240d3 19719d Plaintext (6 bytes) = 195495860f04 AAD (10 bytes) = 6787f3ea22c127aaf195 Key = 6545fc880c94a95198874296d5cc1fd1 61320b6920ce07787f86743b275d1ab3 Nonce = 2f6d1f0434d8848c1177441f Record authentication key = e156e1f9b0b07b780cbe30f259e3c8da Record encryption key = 6fc1c494519f944aae52fcd8b14e5b17 1b5a9429d3b76e430d49940c0021d612 POLYVAL input = 6787f3ea22c127aaf195000000000000 195495860f0400000000000000000000 50000000000000003000000000000000 POLYVAL result = 2c480ed9d236b1df24c6eec109bd40c1 POLYVAL result XOR nonce = 032511dde6ee355335b1aade09bd40c1 ... and masked = 032511dde6ee355335b1aade09bd4041 Tag = 6b62b84dc40c84636a5ec12020ec8c2c Initial counter = 6b62b84dc40c84636a5ec12020ec8cac Result (22 bytes) = a254dad4f3f96b62b84dc40c84636a5e c12020ec8c2c Plaintext (9 bytes) = c9882e5386fd9f92ec AAD (15 bytes) = 489c8fde2be2cf97e74e932d4ed87d Key = d1894728b3fed1473c528b8426a58299 5929a1499e9ad8780c8d63d0ab4149c0 Nonce = 9f572c614b4745914474e7c7 Record authentication key = 0533fd71f4119257361a3ff1469dd4e5 Record encryption key = 4feba89799be8ac3684fa2bb30ade0ea 51390e6d87dcf3627d2ee44493853abe POLYVAL input = 489c8fde2be2cf97e74e932d4ed87d00 c9882e5386fd9f92ec00000000000000 78000000000000004800000000000000 POLYVAL result = bf160bc9ded8c63057d2c38aae552fb4 POLYVAL result XOR nonce = 204127a8959f83a113a6244dae552fb4 ... and masked = 204127a8959f83a113a6244dae552f34 Tag = c0fd3dc6628dfe55ebb0b9fb2295c8c2 Initial counter = c0fd3dc6628dfe55ebb0b9fb2295c8c2 Result (25 bytes) = 0df9e308678244c44bc0fd3dc6628dfe 55ebb0b9fb2295c8c2 Plaintext (12 bytes) = 1db2316fd568378da107b52b AAD (20 bytes) = 0da55210cc1c1b0abde3b2f204d1e9f8 b06bc47f Key = a44102952ef94b02b805249bac80e6f6 1455bfac8308a2d40d8c845117808235 Nonce = 5c9e940fea2f582950a70d5a Record authentication key = 64779ab10ee8a280272f14cc8851b727 Record encryption key = 25f40fc63f49d3b9016a8eeeb75846e0 d72ca36ddbd312b6f5ef38ad14bd2651 POLYVAL input = 0da55210cc1c1b0abde3b2f204d1e9f8 b06bc47f000000000000000000000000 1db2316fd568378da107b52b00000000 a0000000000000006000000000000000 POLYVAL result = cc86ee22c861e1fd474c84676b42739c POLYVAL result XOR nonce = 90187a2d224eb9d417eb893d6b42739c ... and masked = 90187a2d224eb9d417eb893d6b42731c Tag = 404099c2587f64979f21826706d497d5 Initial counter = 404099c2587f64979f21826706d497d5 Result (28 bytes) = 8dbeb9f7255bf5769dd56692404099c2 587f64979f21826706d497d5 Plaintext (15 bytes) = 21702de0de18baa9c9596291b08466 AAD (25 bytes) = f37de21c7ff901cfe8a69615a93fdf7a 98cad481796245709f Key = 9745b3d1ae06556fb6aa7890bebc18fe 6b3db4da3d57aa94842b9803a96e07fb Nonce = 6de71860f762ebfbd08284e4 Record authentication key = 27c2959ed4daea3b1f52e849478de376 Record encryption key = 307a38a5a6cf231c0a9af3b527f23a62 e9a6ff09aff8ae669f760153e864fc93 POLYVAL input = f37de21c7ff901cfe8a69615a93fdf7a 98cad481796245709f00000000000000 21702de0de18baa9c9596291b0846600 c8000000000000007800000000000000 POLYVAL result = c4fa5e5b713853703bcf8e6424505fa5 POLYVAL result XOR nonce = a91d463b865ab88beb4d0a8024505fa5 ... and masked = a91d463b865ab88beb4d0a8024505f25 Tag = b3080d28f6ebb5d3648ce97bd5ba67fd Initial counter = b3080d28f6ebb5d3648ce97bd5ba67fd Result (31 bytes) = 793576dfa5c0f88729a7ed3c2f1bffb3 080d28f6ebb5d3648ce97bd5ba67fd Plaintext (18 bytes) = b202b370ef9768ec6561c4fe6b7e7296 fa85 AAD (30 bytes) = 9c2159058b1f0fe91433a5bdc20e214e ab7fecef4454a10ef0657df21ac7 Key = b18853f68d833640e42a3c02c25b6486 9e146d7b233987bddfc240871d7576f7 Nonce = 028ec6eb5ea7e298342a94d4 Record authentication key = 670b98154076ddb59b7a9137d0dcc0f0 Record encryption key = 78116d78507fbe69d4a820c350f55c7c b36c3c9287df0e9614b142b76a587c3f POLYVAL input = 9c2159058b1f0fe91433a5bdc20e214e ab7fecef4454a10ef0657df21ac70000 b202b370ef9768ec6561c4fe6b7e7296 fa850000000000000000000000000000 f0000000000000009000000000000000 POLYVAL result = 4e4108f09f41d797dc9256f8da8d58c7 POLYVAL result XOR nonce = 4ccfce1bc1e6350fe8b8c22cda8d58c7 ... and masked = 4ccfce1bc1e6350fe8b8c22cda8d5847 Tag = 454fc2a154fea91f8363a39fec7d0a49 Initial counter = 454fc2a154fea91f8363a39fec7d0ac9 Result (34 bytes) = 857e16a64915a787637687db4a951963 5cdd454fc2a154fea91f8363a39fec7d 0a49 Plaintext (21 bytes) = ced532ce4159b035277d4dfbb7db6296 8b13cd4eec AAD (35 bytes) = 734320ccc9d9bbbb19cb81b2af4ecbc3 e72834321f7aa0f70b7282b4f33df23f 167541 Key = 3c535de192eaed3822a2fbbe2ca9dfc8 8255e14a661b8aa82cc54236093bbc23 Nonce = 688089e55540db1872504e1c Record authentication key = cb8c3aa3f8dbaeb4b28a3e86ff6625f8 Record encryption key = 02426ce1aa3ab31313b0848469a1b5fc 6c9af9602600b195b04ad407026bc06d POLYVAL input = 734320ccc9d9bbbb19cb81b2af4ecbc3 e72834321f7aa0f70b7282b4f33df23f 16754100000000000000000000000000 ced532ce4159b035277d4dfbb7db6296 8b13cd4eec0000000000000000000000 1801000000000000a800000000000000 POLYVAL result = ffd503c7dd712eb3791b7114b17bb0cf POLYVAL result XOR nonce = 97558a228831f5ab0b4b3f08b17bb0cf ... and masked = 97558a228831f5ab0b4b3f08b17bb04f Tag = 9d6c7029675b89eaf4ba1ded1a286594 Initial counter = 9d6c7029675b89eaf4ba1ded1a286594 Result (37 bytes) = 626660c26ea6612fb17ad91e8e767639 edd6c9faee9d6c7029675b89eaf4ba1d ed1a286594 C.3. Counter Wrap Tests The tests in this section use AEAD_AES_256_GCM_SIV and are crafted to test correct wrapping of the block counter. Plaintext (32 bytes) = 00000000000000000000000000000000 4db923dc793ee6497c76dcc03a98e108 AAD (0 bytes) = Key = 00000000000000000000000000000000 00000000000000000000000000000000 Nonce = 000000000000000000000000 Record authentication key = dc95c078a24089895275f3d86b4fb868 Record encryption key = 779b38d15bffb63d39d6e9ae76a9b2f3 75d11b0e3a68c422845c7d4690fa594f POLYVAL input = 00000000000000000000000000000000 4db923dc793ee6497c76dcc03a98e108 00000000000000000001000000000000 POLYVAL result = 7367cdb411b730128dd56e8edc0eff56 POLYVAL result XOR nonce = 7367cdb411b730128dd56e8edc0eff56 ... and masked = 7367cdb411b730128dd56e8edc0eff56 Tag = ffffffff000000000000000000000000 Initial counter = ffffffff000000000000000000000080 Result (48 bytes) = f3f80f2cf0cb2dd9c5984fcda908456c c537703b5ba70324a6793a7bf218d3ea ffffffff000000000000000000000000 Plaintext (24 bytes) = eb3640277c7ffd1303c7a542d02d3e4c 0000000000000000 AAD (0 bytes) = Key = 00000000000000000000000000000000 00000000000000000000000000000000 Nonce = 000000000000000000000000 Record authentication key = dc95c078a24089895275f3d86b4fb868 Record encryption key = 779b38d15bffb63d39d6e9ae76a9b2f3 75d11b0e3a68c422845c7d4690fa594f POLYVAL input = eb3640277c7ffd1303c7a542d02d3e4c 00000000000000000000000000000000 0000000000000000c000000000000000 POLYVAL result = 7367cdb411b730128dd56e8edc0eff56 POLYVAL result XOR nonce = 7367cdb411b730128dd56e8edc0eff56 ... and masked = 7367cdb411b730128dd56e8edc0eff56 Tag = ffffffff000000000000000000000000 Initial counter = ffffffff000000000000000000000080 Result (40 bytes) = 18ce4f0b8cb4d0cac65fea8f79257b20 888e53e72299e56dffffffff00000000 0000000000000000 Acknowledgements The authors would like to thank Daniel Bleichenbacher, Uri Blumenthal, Deb Cooley's team at NSA Information Assurance, Scott Fluhrer, Tetsu Iwata, Tibor Jager, John Mattsson, Ondrej Mosnacek, Kenny Paterson, Bart Preneel, Yannick Seurin, and Bjoern Tackmann for their helpful suggestions and review. Authors' Addresses Shay Gueron University of Haifa and Amazon Abba Khoushy Ave 199 Haifa 3498838 Israel Email: shay@math.haifa.ac.il Adam Langley Google LLC 345 Spear St San Francisco, CA 94105 United States of America Email: agl@google.com Yehuda Lindell Bar-Ilan University and Unbound Tech Ramat Gan 5290002 Israel Email: Yehuda.Lindell@biu.ac.il