W3C

XML Encryption Syntax and Processing

W3C Candidate Recommendation 04 March 2002

This version:
http://www.w3.org/TR/2002/CR-xmlenc-core-20020304/
Latest version:
http://www.w3.org/TR/xmlenc-core/
Previous version:
http://www.w3.org/TR/2001/WD-xmlenc-core-20011018/
Editors
Donald Eastlake <dee3@torque.pothole.com>
Joseph Reagle <reagle@w3.org>
Authors
Takeshi Imamura <IMAMU@jp.ibm.com>
Blair Dillaway <blaird@microsoft.com>
Ed Simon <edsimon@xmlsec.com>
Contributors
See participants.

Abstract

This document specifies a process for encrypting data and representing the result in XML. The data may be arbitrary data (including an XML document), an XML element, or XML element content. The result of encrypting data is an XML Encryption element which contains or references the cipher data.

Status of this document

This specification from the XML Encryption Working Group (Activity) is a Candidate Recommendation of the W3C. The Working Group believes this specification incorporates the resolution of all last call issues; furthermore it considers the specification to be stable and invites implementation feedback during this period.

The exit criteria for this phase is at least two interoperable implementations over every feature, one implementation of all features, and one report of satisfaction in an application context (e.g., SOAP, SAML, etc.) Note, this specification already has significant implementation experience which will soon be reflected in its Interoperability Report. We expect to meet all requirements of that report within the two month Candidate Recommendation period (closing April 25). Specific areas where we would appreciate further experience are:

Publication of this document does not imply endorsement by the W3C membership. This is a draft document and may be updated, replaced or obsoleted by other documents at any time. It is inappropriate to cite a W3C Working Draft as anything other than a "work in progress." A list of current W3C working drafts can be found at http://www.w3.org/TR/.

Please send comments to the editors (<reagle@w3.org>, <dee3@torque.pothole.com>) and cc: the list xml-encryption@w3.org (publicly archived).

Patent disclosures relevant to this specification may be found on the Working Group's patent disclosure page in conformance with W3C policy.

Table of Contents

  1. Introduction
    1. Editorial and Conformance Conventions
    2. Design Philosophy
    3. Versions, Namespaces URIs, and Identifiers
    4. Acknowledgements
  2. Encryption Overview and Examples
    1. Encryption Granularity
      1. Encrypting an XML Element
      2. Encrypting XML Element Content (Elements)
      3. Encrypting XML Element Content (Character Data)
      4. Encrypting Arbitrary Data and XML Documents
      5. Super-Encryption: Encrypting EncryptedData
    2. EncryptedData and EncryptedKey Usage
      1. EncryptedData with Symmetric Key  (KeyName)
      2. EncryptedKey (ReferenceList, ds:RetrievalMethod,CarriedKeyName)
  3. Encryption Syntax
    1. The EncryptedType
    2. The EncryptionMethod Element
    3. The CipherData Element
      1. The CipherReference Element
    4. The EncryptedData Element
    5. Extensions to ds:KeyInfo Element
      1. The EncryptedKey Element
      2. The ds:RetrievalMethod Element
    6. The ReferenceList Element
    7. The EncryptionProperties Element
  4. Processing Rules
    1. Encryption
    2. Decryption
    3. Encrypting XML
  5. Algorithms
    1. Algorithm Identifiers and Implementation Requirements
    2. Block Encryption Algorithms
    3. Stream Encryption Algorithms
    4. Key Transport
    5. Key Agreement
    6. Symmetric Key Wrap
    7. Message Digest
    8. Message Authentication
    9. Canonicalization
  6. Security Considerations
  7. Schema and Valid Examples
  8. References

1 Introduction

This document specifies a process for encrypting data and representing the result in XML. The data may be arbitrary data (including an XML document), an XML element, or XML element content. The result of encrypting data is an XML Encryption EncryptedData element which contains (via one of its children's content) or identifies (via a URI reference) the cipher data.

When encrypting an XML element or element content the EncryptedData element replaces the element or content (respectively) in the encrypted version of the XML document.

When encrypting arbitrary data (including entire XML documents), the EncryptedData element may become the root of a new XML document or become a child element in an application-chosen XML document.

1.1 Editorial and Conformance Conventions

This specification uses XML schemas [XML-schema] to describe the content model.

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this specification are to be interpreted as described in RFC2119 [KEYWORDS]:

"they MUST only be used where it is actually required for interoperation or to limit behavior which has potential for causing harm (e.g., limiting retransmissions)"

Consequently, we use these capitalized keywords to unambiguously specify requirements over protocol and application features and behavior that affect the interoperability and security of implementations. These key words are not used (capitalized) to describe XML grammar; schema definitions unambiguously describe such requirements and we wish to reserve the prominence of these terms for the natural language descriptions of protocols and features. For instance, an XML attribute might be described as being "optional." Compliance with the XML-namespace specification [XML-NS] is described as "REQUIRED."

1.2 Design Philosophy

The design philosophy and requirements of this specification are addressed in the XML Encryption Requirements document [EncReq].

1.3 Versions, Namespaces, URIs, and Identifiers

No provision is made for an explicit version number in this syntax. If a future version is needed, it will use a different namespace. The experimental XML namespace [XML-NS] URI that MUST be used by implementations of this (dated) specification is:

   xmlns:xenc='http://www.w3.org/2001/04/xmlenc#'

This namespace is also used as the prefix for algorithm identifiers used by this specification. While applications MUST support XML and XML namespaces, the use of internal entities [XML, section 4.2.1] or our &xenc; entity or "xenc" XML namespace prefix [XML-NS, section 2] and defaulting/scoping conventions are OPTIONAL; we use these facilities to provide compact and readable examples.

This specification makes use of the XML Signature [XML-DSIG] namespace and schema definitions

   xmlns:ds='http://www.w3.org/2000/09/xmldsig#'

URIs [URI] MUST abide by the [XML-Schema] anyURI type definition and the [XML-DSIG, 4.3.3.1 The URI Attribute] specification (i.e., permitted characters, character escaping, scheme support, etc.).

1.4  Acknowledgements

The contributions of the following Working Group members to this specification are gratefully acknowledged in accordance with the contributor policies and the active WG roster.

Additionally, we thank the following for their comments during and subsequent to Last Call:

2 Encryption Overview and Examples (Non-normative)

This section provides an overview and examples of XML Encryption syntax. The formal syntax is found in Encryption Syntax (section 3); the specific processing is given in Processing Rules (section 4).

Expressed in shorthand form, the EncryptedData element has the following structure (where "?" denotes zero or one occurrence; "+" denotes one or more occurrences; "*" denotes zero or more occurrences; and the empty element tag means the element must be empty ):

  <EncryptedData Id? Type?>
    <EncryptionMethod/>?
    <ds:KeyInfo>
      <EncryptedKey>?
      <AgreementMethod>?
      <ds:KeyName>?
      <ds:RetrievalMethod>?
      <ds:*>?
    </ds:KeyInfo>?
    <CipherData>
      <CipherValue>?
      <CipherReference URI?>?
    </CipherData>
    <EncryptionProperties>?
  </EncryptedData>

The CipherData element envelopes or references the raw encrypted data. If enveloping, the raw encrypted data is the CipherValue element's content; if referencing, the CipherReference element's URI attribute points to the location of the raw encrypted data

2.1 Encryption Granularity

Consider the following fictitious payment information, which includes identification information and information appropriate to a payment method (e.g., credit card, money transfer, or electronic check):

  <?xml version='1.0'?>
  <PaymentInfo xmlns='http://example.org/paymentv2'>
    <Name>John Smith</Name>
    <CreditCard Limit='5,000' Currency='USD'>
      <Number>4019 2445 0277 5567</Number>
      <Issuer>Example Bank</Issuer>
      <Expiration>04/02</Expiration>
    </CreditCard>
  </PaymentInfo>

This markup represents that John Smith is using his credit card with a limit of $5,000USD.

2.1.1 Encrypting an XML Element

Smith's credit card number is sensitive information! If the application wishes to keep that information confidential, it can encrypt the CreditCard element:

  <?xml version='1.0'?>
  <PaymentInfo xmlns='http://example.org/paymentv2'>
    <Name>John Smith</Name>
    <EncryptedData Type='http://www.w3.org/2001/04/xmlenc#Element'
     xmlns='http://www.w3.org/2001/04/xmlenc#'>
      <CipherData>
        <CipherValue>A23B45C56</CipherValue>
      </CipherData>
    </EncryptedData>
  </PaymentInfo>

By encrypting the entire CreditCard element from its start to end tags, the identity of the element itself is hidden. (An eavesdropper doesn't know whether he used a credit card or money transfer.) The CipherData element contains the encrypted serialization of the CreditCard element.

2.1.2 Encrypting XML Element Content (Elements)

As an alternative scenario, it may be useful for intermediate agents to know that John used a credit card with a particular limit, but not the card's number, issuer, and expiration date. In this case, the content (character data or children elements) of the CreditCard element is encrypted:

  <?xml version='1.0'?> 
  <PaymentInfo xmlns='http://example.org/paymentv2'>
    <Name>John Smith</Name>
    <CreditCard Limit='5,000' Currency='USD'>
      <EncryptedData xmlns='http://www.w3.org/2001/04/xmlenc#'
       Type='http://www.w3.org/2001/04/xmlenc#Content'>
        <CipherData>
          <CipherValue>A23B45C56</CipherValue>
        </CipherData>
      </EncryptedData>
    </CreditCard>
  </PaymentInfo>

2.1.3 Encrypting XML Element Content (Character Data)

Or, consider the scenario in which all the information except the actual credit card number can be in the clear, including the fact that the Number element exists:

  <?xml version='1.0'?> 
  <PaymentInfo xmlns='http://example.org/paymentv2'>
    <Name>John Smith</Name>
    <CreditCard Limit='5,000' Currency='USD'>
      <Number>
        <EncryptedData xmlns='http://www.w3.org/2001/04/xmlenc#'
         Type='http://www.w3.org/2001/04/xmlenc#Content'>
          <CipherData>
            <CipherValue>A23B45C56</CipherValue>
          </CipherData>
        </EncryptedData>
      </Number>
      <Issuer>Example Bank</Issuer>
      <Expiration>04/02</Expiration>
    </CreditCard>
  </PaymentInfo>

Both CreditCard and Number are in the clear, but the character data content of Number is encrypted.

2.1.4 Encrypting Arbitrary Data and XML Documents

If the application scenario requires all of the information to be encrypted, the whole document is encrypted as an octet sequence. This applies to arbitrary data including XML documents.

  <?xml version='1.0'?> 
  <EncryptedData xmlns='http://www.w3.org/2001/04/xmlenc#'
   MimeType='text/xml'>
    <CipherData>
      <CipherValue>A23B45C56</CipherValue>
    </CipherData>
  </EncryptedData>

2.1.5 Super-Encryption: Encrypting EncryptedData

An XML document may contain zero or more EncryptedData elements. EncryptedData cannot be the parent or child of another EncryptedData element. However, the actual data encrypted can be anything, including EncryptedData and EncryptedKey elements (i.e., super-encryption). During super-encryption of an EncryptedData or EncryptedKey element, one must encrypt the entire element. Encrypting only the content of these elements, or encrypting selected child elements is an invalid instance under the provided schema.
For example, consider the following:

  <pay:PaymentInfo xmlns:pay='http://example.org/paymentv2'>
    <EncryptedData Id='ED1' xmlns='http://www.w3.org/2001/04/xmlenc#'
     Type='http://www.w3.org/2001/04/xmlenc#Element'>
      <CipherData>
        <CipherValue>originalEncryptedData</CipherValue>
      </CipherData>
    </EncryptedData>
  </pay:PaymentInfo>

A valid super-encryption of "//xenc:EncryptedData[@Id='ED1']" would be:

  <pay:PaymentInfo xmlns:pay='http://example.org/paymentv2'>
    <EncryptedData Id='ED2' xmlns='http://www.w3.org/2001/04/xmlenc#'
     Type='http://www.w3.org/2001/04/xmlenc#Element'>
      <CipherData>
        <CipherValue>newEncryptedData</CipherValue>
      </CipherData>
    </EncryptedData>
  </pay:PaymentInfo>

where the CipherValue content of 'newEncryptedData' is the base64 encoding of the encrypted octet sequence resulting from encrypting the EncryptedData element with Id='ED1'.

2.2 EncryptedData and EncryptedKey Usage

2.2.1 EncryptedData with Symmetric Key  (KeyName)

  [s1] <EncryptedData xmlns='http://www.w3.org/2001/04/xmlenc#'
        Type='http://www.w3.org/2001/04/xmlenc#Element'/>
  [s2]   <EncryptionMethod
          Algorithm='http://www.w3.org/2001/04/xmlenc#3des-cbc'/>
  [s3]   <ds:KeyInfo xmlns:ds='http://www.w3.org/2000/09/xmldsig#'>
  [s4]     <ds:KeyName>John Smith</ds:KeyName>
  [s5]   </ds:KeyInfo>
  [s6]   <CipherData><CipherValue>DEADBEEF</CipherValue></CipherData>
  [s7] </EncryptedData>

[s1] The type of data encrypted may be represented as an attribute value to aid in decryption and subsequent processing. In this case, the data encrypted was an 'element'. Other alternatives include 'content' of an element, or an external octet sequence which can also be identified via the MimeType and Encoding attributes.

[s2] This (3DES CBC) is a symmetric key cipher.

[s4] The symmetric key has an associated name "John Smith".

[s6] CipherData contains a CipherValue, which is a base64 encoded octet sequence. Alternately, it could contain a CipherReference, which is a URI reference along with transforms necessary to obtain the encrypted data as an octet sequence

2.2.2 EncryptedKey (ReferenceList, ds:RetrievalMethod, CarriedKeyName)

The following EncryptedData structure is very similar to the one above, except this time the key is referenced using a ds:RetrievalMethod:

  [t01] <EncryptedData Id='ED' 
         xmlns='http://www.w3.org/2001/04/xmlenc#'>
  [t02]   <EncryptionMethod 
           Algorithm='http://www.w3.org/2001/04/xmlenc#aes128-cbc'/>
  [t03]   <ds:KeyInfo xmlns:ds='http://www.w3.org/2000/09/xmldsig#'>
  [t04]     <ds:RetrievalMethod URI='#EK'
             Type="http://www.w3.org/2001/04/xmlenc#EncryptedKey">
  [t05]     <ds:KeyName>Sally Doe</ds:KeyName>
  [t06]   </ds:KeyInfo>
  [t07]   <CipherData><CipherValue>DEADBEEF</CipherValue></CipherData>
  [t08] </EncryptedData>

[t02] This (AES-128-CBC) is a symmetric key cipher.

[t04] ds:RetrievalMethod is used to indicate the location of a key with type &xenc;EncryptedKey. The (AES) key is located at '#EK'.

[t05] ds:KeyName provides an alternative method of identifying the key needed to decrypt the CipherData. Either or both the ds:KeyName and ds:KeyRetrievalMethod could be used to identify the same key.

Within the same XML document, there existed an EncryptedKey structure that was referenced within [t04]:

  [t09] <EncryptedKey Id='EK' xmlns='http://www.w3.org/2001/04/xmlenc#'>
  [t10]   <EncryptionMethod 
           Algorithm="http://www.w3.org/2001/04/xmlenc#rsa-1_5"/>
  [t11]   <ds:KeyInfo xmlns:ds='http://www.w3.org/2000/09/xmldsig#'>
  [t12]     <ds:KeyName>John Smith</ds:KeyName>
  [t13]   </ds:KeyInfo>
  [t14]   <CipherData><CipherValue>xyzabc</CipherValue></CipherData>
  [t15]   <ReferenceList>
  [t16]     <DataReference URI='#ED'/>
  [t17]   </ReferenceList>
  [t18]   <CarriedKeyName>Sally Doe</CarriedKeyName>
  [t19] </EncryptedKey>

[t09] The EncryptedKey element is similar to the EncryptedData element except that the data encrypted is always a key value.

[t10] The EncryptionMethod is the RSA public key algorithm.

[t12] ds:KeyName of "John Smith" is a property of the key necessary for decrypting (using RSA) the CipherData.

[t14] The CipherData's CipherValue is an octet sequence that is processed (serialized, encrypted, and encoded) by a referring encrypted object's EncryptionMethod. (Note, an EncryptedKey's EncryptionMethod is the algorithm used to encrypt these octets and does not speak about what type of octets they are.)

[t15-17] A ReferenceList identifies the encrypted objects (DataReference and KeyReference) encrypted with this key. The ReferenceList contains a list of references to data encrypted by the symmetric key carried within this structure.

[t18] The CarriedKeyName element is used to identify the encrypted key value which may be referenced by the KeyName element in ds:KeyInfo. (Since ID attribute values must be unique to a document,CarriedKeyName can indicate that several EncryptedKey structures contain the same key value encrypted for different recipients.)

3 Encryption Syntax

This section provides a detailed description of the syntax and features for XML Encryption. Features described in this section MUST be implemented unless otherwise noted. The syntax is defined via [XML-Schema] with the following XML preamble, declaration, internal entity, and import:

  Schema Definition:

  <?xml version="1.0" encoding="utf-8"?>
  <!DOCTYPE schema  PUBLIC "-//W3C//DTD XMLSchema 200102//EN"
   "http://www.w3.org/2001/XMLSchema.dtd"
   [
     <!ATTLIST schema
       xmlns:xenc CDATA #FIXED 'http://www.w3.org/2001/04/xmlenc#'
       xmlns:ds CDATA #FIXED 'http://www.w3.org/2000/09/xmldsig#'>
     <!ENTITY xenc 'http://www.w3.org/2001/04/xmlenc#'>
     <!ENTITY % p ''>
     <!ENTITY % s ''>
    ]>
  
  <schema xmlns='http://www.w3.org/2001/XMLSchema' version='1.0'
          xmlns:ds='http://www.w3.org/2000/09/xmldsig#'
          xmlns:xenc='http://www.w3.org/2001/04/xmlenc#'
          targetNamespace='http://www.w3.org/2001/04/xmlenc#'
          elementFormDefault='qualified'>

    <import namespace='http://www.w3.org/2000/09/xmldsig#'
            schemaLocation='http://www.w3.org/TR/2001/CR-xmldsig-core-20010419/xmldsig-core-schema.xsd'/>

3.1 The EncryptedType

EncryptedType is the abstract type from which EncryptedData and EncryptedKey are derived. While these two latter element types are very similar with respect to their content models, a syntactical distinction is useful to processing. Implementation MUST generate laxly schema valid [XML-schema] EncryptedData or EncryptedKey as specified by the subsequent schema declarations. (Note the laxly schema valid generation means that the content permitted by xsd:ANY need not be valid.) Implementations SHOULD create these XML structures (EncryptedType elements and their descendents/content) in Normalization Form C [NFC, NFC-Corrigendum].

  Schema Definition:

  <complexType name='EncryptedType' abstract='true'>
    <sequence>
      <element name='EncryptionMethod' type='xenc:EncryptionMethodType' 
               minOccurs='0'/>
      <element ref='ds:KeyInfo' minOccurs='0'/>
      <element ref='xenc:CipherData'/>
      <element ref='xenc:EncryptionProperties' minOccurs='0'/>
    </sequence>
    <attribute name='Id' type='ID' use='optional'/>
    <attribute name='Type' type='anyURI' use='optional'/>
    <attribute name='MimeType' type='string' use='optional'/>
    <attribute name='Encoding' type='string' use='optional'/> 
   </complexType>

EncryptionMethod is an optional element that describes the encryption algorithm applied to the cipher data. If the element is absent, the encryption algorithm must be known by the recipient or the decryption will fail.

ds:KeyInfo is an optional element, defined by [XML-DSIG], that carries information about the key used to encrypt the data. Subsequent sections of this specification define new elements that may appear as children of ds:KeyInfo.

CipherData is a mandatory element that contains the CipherValue or CipherReference with the encrypted data.

EncryptionProperties can contain additional information concerning the generation of the EncryptedType (e.g., date/time stamp).

Id is an optional attribute providing for the standard method of assigning a string id to the element within the document context.

Type is an optional attribute identifying type information about the plaintext form of the encrypted content. While optional, this specification takes advantage of it for mandatory processing described in Processing Rules: Decryption (section 4.2). If the EncryptedData element contains data of Type 'element' or element 'content', and replaces that data in an XML document context, it is strongly recommended the Type attribute be provided. Without this information, the decryptor will be unable to automatically restore the XML document to its original cleartext form.

MimeType is an optional (advisory) attribute which describes the media type of the data which has been encrypted. The value of this attribute is a string with values defined by [MIME]. For example, if the data that is encrypted is a base64 encoded PNG, the Encoding may be specified as 'base64' and the MimeType as 'image/png'. This attribute is purely advisory; no validation of the MimeType information is required and it does not indicate the encryption application must do any additional processing. Note, this information may not be necessary if it is already bound to the identifier in the Type attribute. For example, the Element and Content types defined in this specification are always UTF-8 encoded text.

3.2 The EncryptionMethod Element

EncryptionMethod is an optional element that describes the encryption algorithm applied to the cipher data. If the element is absent, the encryption algorithm must be known by the recipient or the decryption will fail.

  Schema Definition:

  <complexType name='EncryptionMethodType' mixed='true'>
    <sequence>
      <element name='KeySize' minOccurs='0'
               type='xenc:KeySizeType'/>
      <any namespace='##other' minOccurs='0'
                               maxOccurs='unbounded'/>
    </sequence>
    <attribute name='Algorithm' type='anyURI' use='required'/>
  </complexType>

The permitted child elements of the EncryptionMethod are determined by the specific value of the Algorithm attribute URI, and the KeySize child element is always permitted. For example, the RSA-OAEP algorithm (section 5.4.2) uses the ds:DigestMethod and OAEPparams elements. (We rely upon the ANY schema construct because it is not possible to specify element content based on the value of an attribute.)

The presence of any child element under EncryptionMethod which is not permitted by the algorithm or the presence of a KeySize child inconsistent with the algorithm MUST be treated as an error. (All algorithm URIs specified in this document imply a key size but this is not true in general. Most popular stream cipher algorithms take variable size keys.)

3.3 The CipherData Element

The CipherData is a mandatory element that provides the encrypted data. It must either contain the encrypted octet sequence as base64 encoded text of the CipherValue element, or provide a reference to an external location containing the encrypted octet sequence via the CipherReference element.

  Schema Definition:

  <element name='CipherData' type='xenc:CipherDataType'/>
  <complexType name='CipherDataType'>
     <choice>
       <element name='CipherValue' type='base64Binary'/>
       <element ref='xenc:CipherReference'/>
     </choice>
   </complexType>

3.3.1 The CipherReference Element

If CipherValue is not supplied directly, the CipherReference identifies a source which, when processed, yields the encrypted octet sequence.

The actual value is obtained as follows. The CipherReference URI contains an identifier that is dereferenced. Should the CipherReference element contain an OPTIONAL sequence of Transforms, the data resulting from dereferencing the URI is transformed as specified so as to yield the intended cipher value. For example, if the value is base64 encoded within an XML document; the transforms could specify an XPath expression followed by a base64 decoding so as to extract the octets.

The syntax of the URI and Transforms is similar to that of [XML-DSIG]. However, there is a difference between signature and encryption processing. In [XML-DSIG] both generation and validation processing start with the same source data and perform that transform in the same order. In encryption, the decryptor has only the cipher data and the specified transforms are enumerated for the decryptor, in the order necessary to obtain the octets. Consequently, because it has different semantics Transforms is in the &xenc; namespace.

For example, if the relevant cipher value is captured within a CipherValue element within a different XML document, the CipherReference might look as follows:

  <CipherReference URI="http://www.example.com/CipherValues.xml">
    <Transforms>
      <ds:Transform 
       Algorithm="http://www.w3.org/TR/1999/REC-xpath-19991116">
          <ds:XPath xmlns:rep="http://www.example.org/repository">
            self::text()[parent::rep:CipherValue[@Id="example1"]]
          </ds:XPath>
      </ds:Transform>
      <ds:Transform Algorithm="http://www.w3.org/2000/09/xmldsig#base64"/>
    </Transforms>
  </CipherReference>

Implementations MUST support the CipherReference feature and the same URI encoding, dereferencing, scheme, and HTTP response codes as that of [XML-DSIG]. The Transform feature and particular transform algorithms are OPTIONAL.

  Schema Definition:

  <element name='CipherReference' type='xenc:CipherReferenceType'/>
   <complexType name='CipherReferenceType'>
       <sequence>
         <element name='Transforms' type='xenc:TransformsType' minOccurs='0'/>
       </sequence>
       <attribute name='URI' type='anyURI' use='required'/>
   </complexType>

    <complexType name='TransformsType'>
       <sequence>
         <element ref='ds:Transform' maxOccurs='unbounded'/> 
       </sequence>
     </complexType>

3.4 The EncryptedData Element

The EncryptedData element is the core element in the syntax. Not only does its CipherData child contain the encrypted data, but it's also the element that replaces the encrypted element, or serves as the new document root.

  Schema Definition:

  <element name='EncryptedData' type='xenc:EncryptedDataType'/>
  <complexType name='EncryptedDataType'>
    <complexContent>
     <extension base='xenc:EncryptedType'>
     </extension>
    </complexContent>
  </complexType>

3.5 Extensions to ds:KeyInfo Element

There are three ways that the keying material needed to decrypt CipherData can be provided:

  1. The EncryptedData or EncryptedKey element specify the associated keying material via a child of ds:KeyInfo. All of the child elements of ds:KeyInfo specified in [XML-DSIG] MAY be used as qualified:
    1. Using the literal, unprotected, ds:KeyValue to transport the encryption key is obviously NOT RECOMMENDED.
    2. Support of ds:KeyName to refer to an EncryptedKey CarriedKeyName is RECOMMENDED.
    3. Support for same document ds:RetrievalMethod is REQUIRED.

    In addition, we provide two additional child elements: applications MUST support EncryptedKey (section 3.5.1) and MAY support AgreementMethod (section 5.5).

  2. A detached (not inside ds:KeyInfo) EncryptedKey element can specify the EncryptedData or EncryptedKey to which its decrypted key will apply via a DataReference or KeyReference (section 3.6).
  3. The keying material can be determined by the recipient by application context and thus need not be explicitly mentioned in the transmitted XML.

3.5.1 The EncryptedKey Element

Identifer
Type="http://www.w3.org/2001/04/xmlenc#EncryptedKey"

(This can be used within a ds:RetrievalMethod element to identify the referent's type.)

The EncryptedKey element is used to transport encryption keys from the originator to a known recipient(s). It may be used as a stand-alone XML document, be placed within an application document, or appear inside an EncryptedData element as a child of a ds:KeyInfo element. The key value is always encrypted to the recipient(s). When EncryptedKey is decrypted the resulting octets are made available to the EncryptionMethod algorithm without any additional processing.

  Schema Definition:

  <element name='EncryptedKey' type='xenc:EncryptedKeyType'/>
  <complexType name='EncryptedKeyType'>
    <complexContent>
      <extension base='xenc:EncryptedType'>
        <sequence>
          <element ref='xenc:ReferenceList' minOccurs='0'/>
          <element name='CarriedKeyName' type='string' minOccurs='0'/>
        </sequence>
        <attribute name='Recipient' type='string' use='optional'/>
      </extension>
    </complexContent>   
  </complexType>

ReferenceList is an optional element containing pointers to data and keys encrypted using this key. The reference list may contain multiple references to EncryptedKey and EncryptedData elements. This is done using KeyReference and DataReference elements respectively. These are defined below.

CarriedKeyName is an optional element for associating a user readable name with the key value. This may then be used to reference the key using the ds:KeyName element within ds:KeyInfo. The same CarriedKeyName label, unlike an ID type, may occur multiple times within a single document. The value of the key is to be the same in all EncryptedKey elements identified with the same CarriedKeyName label within a single XML document. Note that because whitespace is significant in the value of the ds:KeyName element, whitespace is also significant in the value of the CarriedKeyName element.

Recipient is an optional attribute that contains a hint as to which recipient this encrypted key value is intended for. Its contents are application dependent.

The Type attribute inheritted from EncryptedType can be used to further specify the type of the encrypted key if the EncryptionMethod Algorithm does not define a unambiguous encoding/representation. (Note, all the algorithms in this specification have an unambigous representation for their associated key structures.)

3.5.2 The ds:RetrievalMethod Element

The ds:RetrievalMethod [XML-DSIG]with a Type of 'http://www.w3.org/2001/04/xmlenc#EncryptedKey' provides a way to express a link to an EncryptedKey element containing the key needed to decrypt the CipherData associated with an EncryptedData or EncryptedKey element. The ds:RetrievalMethod with this type is always a child of the ds:KeyInfo element and may appear multiple times. If there is more than one instance of a ds:RetrievalMethod in a ds:KeyInfo of this type, then the EncryptedKey objects referred to must contain the same key value, possibly encrypted in different ways or for different recipients.

  Schema Definition:

  <!--
      <attribute name='Type' type='anyURI' use='optional'
      fixed='http://www.w3.org/2001/04/xmlenc#EncryptedKey' />
  -->

3.6 The ReferenceList Element

ReferenceList is an element that contains pointers from a key value of an EncryptedKey to items encrypted by that key value (EncryptedData or EncryptedKey elements).

  Schema Definition:

  <element name='ReferenceList'>
    <complexType>
      <choice>
        <element name='DataReference' type='xenc:ReferenceType'
         minOccurs='0' maxOccurs='unbounded'/>
        <element name='KeyReference' type='xenc:ReferenceType'
         minOccurs='0' maxOccurs='unbounded'/>
      </choice>
    </complexType>
  </element>

  <complexType name='ReferenceType'>
    <sequence>
      <any namespace='##other' minOccurs='0' maxOccurs='unbounded'/>
    </sequence>
    <attribute name='URI' type='anyURI' use='required'/>
  </complexType>

DataReference elements are used to refer to EncryptedData elements that were encrypted using the key defined in the enclosing EncryptedKey element. Multiple DataReference elements can occur if multiple EncryptedData elements exist that are encrypted by the same key.

KeyReference elements are used to refer to EncryptedKey elements that were encrypted using the key defined in the enclosing EncryptedKey element. Multiple KeyReference elements can occur if multiple EncryptedKey elements exist that are encrypted by the same key.

For both types of references one may optionally specify child elements to aid the recipient in retrieving the EncryptedKey and/or EncryptedData elements. These could include information such as XPath transforms, decompression transforms, or information on how to retrieve the elements from a document storage facility. For example:

  <ReferenceList>
    <DataReference URI="#invoice34">
      <ds:Transforms>
        <ds:Transform Algorithm="http://www.w3.org/TR/1999/REC-xpath-19991116">
          <ds:XPath xmlns:xenc="http://www.w3.org/2001/04/xmlenc#">
              self::xenc:EncryptedData[@Id="example1"]
          </ds:XPath>
        </ds:Transform>
      </ds:Transforms>
    </DataReference>
  </ReferenceList>

3.7 The EncryptionProperties Element

Identifier
Type="http://www.w3.org/2001/04/xmlenc#EncryptionProperties"

(This can be used within a ds:Reference element to identify the referent's type.)

Additional information items concerning the generation of the EncryptedData or EncryptedKey can be placed in an EncryptionProperty element (e.g., date/time stamp or the serial number of cryptographic hardware used during encryption). The Target attribute identifies the EncryptedType structure being described. anyAttribute permits the inclusion of attributes from the XML namespace to be included (i.e., xml:space, xml:lang, and xml:base).

  Schema Definition:

  <element name='EncryptionProperties' type='xenc:EncryptionPropertiesType'/> 
  <complexType name='EncryptionPropertiesType'>
    <sequence>
      <element ref='xenc:EncryptionProperty' maxOccurs='unbounded'/> 
    </sequence>
    <attribute name='Id' type='ID' use='optional'/> 
  </complexType>

    <element name='EncryptionProperty' type='xenc:EncryptionPropertyType'/> 
    <complexType name='EncryptionPropertyType' mixed='true'>
      <choice maxOccurs='unbounded'>
        <any namespace='##other' processContents='lax'/>
      </choice>
      <attribute name='Target' type='anyURI' use='optional'/> 
      <attribute name='Id' type='ID' use='optional'/> 
      <anyAttribute namespace="http://www.w3.org/XML/1998/namespace"/>
    </complexType>

4 Processing Rules

This section describes the operations to be performed as part of encryption and decryption processing by implementations of this specification. The conformance requirements are specified over the following roles:

Application
The application which makes request of an XML Encryption implementation via the provision of data and parameters necessary for its processing.
Encryptor
An XML Encryption implementation with the role of encrypting data.
Decryptor
An XML Encryption implementation with the role of decrypting data.

4.1 Encryption

For each data item to be encrypted as an EncryptedData or EncryptedKey (elements derived from EncryptedType), the encryptor must:

  1. Select the algorithm (and parameters) to be used in encrypting this data.
  2. Obtain and (optionally) represent the key.
    1. If the key is to be identified (via naming, URI, or included in a child element), construct the ds:KeyInfo as approriate (e.g., ds:KeyName, ds:KeyValue, ds:RetrievalMethod, etc.)
    2. If the key itself is to be encrypted, construct an EncryptedKey element by recursively applying this encryption process. The result may then be a child of ds:KeyInfo, or it may exist elsewhere and may be identified in the preceding step.
  3.  Encrypt the data
    1. If the data is an 'element' [XML, section 3] or element 'content' [XML, section 3.1], obtain the octets by serializing the data in UTF-8 as specified in [XML]. ([NFC] MUST be applied when this involves conversion from a legacy (i.e. non-Unicode) encoding.) Serialization MAY be done by the encryptor. If the encryptor does not serialize, then the application MUST perform the serialization.
    2. If the data is of any other type that is not already octets, the application MUST serialize it as octets.
    3. Encrypt the octets using the algorithm and key from steps 1 and 2.
    4. Unless the decryptor will implicitly know the type of the encrypted data, the encryptor SHOULD provide the type for representation.

      The definition of this type as bound to an identifier specifies how to obtain and interpret the plaintext octets after decryption. For example, the idenifier could indicate that the data is an instance of another application (e.g., some XML compression application) that must be further processed. Or, if the data is a simple octet sequence it MAY be described with the MimeType and Encoding attributes. For example, the data might be an XML document (MimeType="text/xml"), sequence of characters (MimeType="text/plain"), or binary image data (MimeType="image/png").

  4. Build the EncryptedType (EncryptedData or EncryptedKey) structure:

    An EncryptedType structure represents all of the information previously discussed including the type of the encrypted data, encryption algorithm, parameters, key, type of the encrypted data, etc.

    1. If the encrypted octet sequence obtained in step 3 is to be stored in the CipherData element within the EncryptedType, then the encrypted octet sequence is base64 encoded and inserted as the content of a CipherValue element.
    2. If the encrypted octet sequence is to be stored externally to the EncryptedType structure, then store or return the encrypted octet sequence, and represent the URI and transforms (if any) required for the decryptor to retrieve the encrypted octet sequence within a CipherReference element.
  5. Process EncryptedData
    1. If the Type of the encrypted data is 'element' or element 'content', then the encryptor MUST be able to return the EncryptedData element to the application. The application MAY use this as the top-level element in a new XML document or insert it into another XML document, which may require a re-encoding.

      The encryptor SHOULD be able to replace the unencrypted 'element' or 'content' with the EncryptedData element. When an application requires an XML element or content to be replaced, it supplies the XML document context in addition to identifying the element or content to be replaced. The encryptor removes the identified element or content and inserts the EncryptedData element in its place.

      (Note: If the Type is "content" the document resulting from decryption will not be well-formed if (a) the original plaintext was not well-formed (e.g., PCDATA by itself is not well-formed) and (b) the EncryptedData element was previously the root element of the document)

    2. If the Type of the encrypted data is not 'element' or element 'content', then the encryptor MUST always return the EncryptedData element to the application. The application MAY use this as the top-level element in a new XML document or insert it into another XML document, which may require a re-encoding.

4.2 Decryption

For each EncryptedType derived element, (i.e., EncryptedData or EncryptedKey), to be decrypted, the decryptor must:

  1. Process the element to determine the algorithm, parameters and ds:KeyInfo element to be used. If some information is omitted, the application MUST supply it.
  2. Locate the data encryption key according to the ds:KeyInfo element, which may contain one or more children elements. These children have no implied processing order. If the data encryption key is encrypted, locate the corresponding key to decrypt it. (This may be a recursive step as the key-encryption key may itself be encrypted.) Or, one might retrieve the data encryption key from a local store using the provided attributes or implicit binding.
  3. Decrypt the data contained in the CipherData element.
    1. If a CipherValue child element is present, then the associated text value is retrieved and base64 decoded so as to obtain the encrypted octet sequence.
    2. If a CipherReference child element is present, the URI and transforms (if any) are used to retrieve the encrypted octet sequence.
    3. The encrypted octet sequence is decrypted using the algorithm/parameters and key value already determined from steps 1 and 2.
  4. Process decrypted data of Type 'element' or element 'content'.
    1. The cleartext octet sequence obtained in step 3 is interpreted as UTF-8 encoded character data.
    2. The decryptor MUST be able to return the value of Type and the UTF-8 encoded XML character data. The decryptor is NOT REQUIRED to perform validation on the serialized XML.
    3. The decryptor SHOULD support the ability to replace the EncryptedData element with the decrypted 'element' or element 'content' represented by the UTF-8 encoded characters. The decryptor is NOT REQUIRED to perform validation on the result of this replacement operation.

      The application supplies the XML document context and identifies the EncryptedData element being replaced. If the document into which the replacement is occurring is not UTF-8, the decryptor MUST transcode the UTF-8 encoded characters into the target encoding.

  5. Process decrypted data if Type is unspecified or is not 'element' or element 'content'.
    1. The cleartext octet sequence obtained in Step 3 MUST be returned to the application for further processing along with the Type, MimeType, and Encoding attribute values when specified. MimeType and Encoding are advisory. The Type value is normative as it may contain information necessary for the processing or interpration of the data by the application.
    2. Note, this step includes processing data decrypted from an EncryptedKey. The cleartext octet sequence represents a key value and is used by the application in decrypting other EncryptedType element(s).

4.3 XML Encryption

Encryption and decryption operations are transforms on octets. The application is responsible for the marshalling XML such that it can be serialized into an octet sequence, encrypted, decrypted, and be of use to the recipient.

For example, if the application wishes to canonicalize its data or encode/compress the data in an XML packaging format, the application needs to marshal the XML accordingly and identify the resulting type via the EncryptedData Type attribute. The likelihood of successful decryption and subsequent processing will be dependent on the recipient's support for the given type. Also, if the data is intended to be processed both before encryption and after decryption (e.g., XML Signature [XML-DSIG] validation or an XSLT transform) the encrypting application must be careful to preserve information necessary for that process's success.

For interoperability purposes, the following types MUST be implemented.

element 'http://www.w3.org/2001/04/xmlenc#Element'
"[39]  element ::= EmptyElemTag | STag content ETag" [XML]
content 'http://www.w3.org/2001/04/xmlenc#Content'
"[43] content ::= CharData? ((element | Reference | CDSect | PI | Comment) CharData?)*" [XML]

5. Algorithms

This section discusses algorithms used with the XML Encryption specification. Entries contain the identifier to be used as the value of the Algorithm attribute of the EncryptionMethod element or other element representing the role of the algorithm, a reference to the formal specification, definitions for the representation of keys and the results of cryptographic operations where applicable, and general applicability comments.

5.1 Algorithm Identifiers and Implementation Requirements

All algorithms listed below have implicit parameters depending on their role. For example, the data to be encrypted or decrypted, keying material, and direction of operation (encrypting or decrypting) for encryption algorithms. Any explicit additional parameters to an algorithm appear as content elements within the element. Such parameter child elements have descriptive element names, which are frequently algorithm specific, and SHOULD be in the same namespace as this XML Encryption specification, the XML Signature specification, or in an algorithm specific namespace. An example of such an explicit parameter could be a nonce (unique quantity) provided to a key agreement algorithm.

This specification defines a set of algorithms, their URIs, and requirements for implementation. Levels of requirement specified, such as "REQUIRED" or "OPTIONAL", refere to implementation, not use. Furthermore, the mechanism is extensible, and alternative algorithms may be used.

Table of Algorithms

The table below lists the categories of algorithms. Within each category, a brief name, the level of implementation requirement, and an identifying URI are given for each algorithm.

Block Encryption
  1. REQUIRED TRIPLEDES
    http://www.w3.org/2001/04/xmlenc#tripledes-cbc
  2. REQUIRED AES-128
    http://www.w3.org/2001/04/xmlenc#aes128-cbc
  3. REQUIRED AES-256
    http://www.w3.org/2001/04/xmlenc#aes256-cbc
  4. OPTIONAL AES-192
    http://www.w3.org/2001/04/xmlenc#aes192-cbc
Stream Encryption
  1. none
    Syntax and recommendations are given below to support user specified algorithms.
Key Transport
  1. REQUIRED RSA-v1.5
    http://www.w3.org/2001/04/xmlenc#rsa-1_5
  2. REQUIRED RSA-OAEP
    http://www.w3.org/2001/04/xmlenc#rsa-oaep-mgf1p
Key Agreement
  1. OPTIONAL Diffie-Hellman
    http://www.w3.org/2001/04/xmlenc#dh
Symmetric Key Wrap
  1. REQUIRED TRIPLEDES KeyWrap
    http://www.w3.org/2001/04/xmlenc#kw-tripledes
  2. REQUIRED AES-128 KeyWrap
    http://www.w3.org/2001/04/xmlenc#kw-aes128
  3. REQUIRED AES-256 KeyWrap
    http://www.w3.org/2001/04/xmlenc#kw-aes256
  4. OPTIONAL AES-192 KeyWrap
    http://www.w3.org/2001/04/xmlenc#kw-aes192
Message Digest
  1. REQUIRED SHA1
    http://www.w3.org/2000/09/xmldsig#sha1
  2. RECOMMENDED SHA256
    http://www.w3.org/2001/04/xmlenc#sha256
  3. OPTIONAL SHA512
    http://www.w3.org/2001/04/xmlenc#sha512
  4. OPTIONAL RIPEMD-160
    http://www.w3.org/2001/04/xmlenc#ripemd160
Message Authentication
  1. RECOMMENDED XML Digital Signature
    http://www.w3.org/TR/2001/CR-xmldsig-core-20010419/
Canonicalization
  1. OPTIONAL Canonical XML (omits comments)
    http://www.w3.org/TR/2001/REC-xml-c14n-20010315
  2. OPTIONAL Canonical XML with Comments
    http://www.w3.org/TR/2001/REC-xml-c14n-20010315#WithComments
  3. OPTIONAL Exclusive XML Canonicalization (omits comments)
    http://www.w3.org/2001/10/xml-exc-c14n#
  4. OPTIONAL Exclusive XML Canonicalization with Comments
    http://www.w3.org/2001/10/xml-exc-c14n#WithComments
Encoding
  1. REQUIRED base64
    http://www.w3.org/2000/09/xmldsig#base64

5.2 Block Encryption Algorithms

Block encryption algorithms are designed for encrypting and decrypting data in fixed size, multiple octet blocks. Their identifiers appear as the value of the Algorithm attributes of EncryptionMethod elements that are children of EncryptedData.

Block encryption algorithms take, as implicit arguments, the data to be encrypted or decrypted, the keying material, and their direction of operation. For all of these algorithms specified below, an initialization vector (IV) is required that is encoded with the cipher text. For user specified block encryption algorithms, the IV, if any, could be specified as being with the cipher data, as an algorithm content element, or elsewhere.

The IV is encoded with and before the cipher text for the algorithms below for ease of availability to the decryption code and to emphasize its association with the cipher text. Good cryptographic practice requires that a different IV be used for every encryption.

Padding

Since the data being encrypted is an arbitrary number of octets, it may not be a multiple of the block size. This is solved by padding the plain text up to the block size before encryption and unpadding after decrytion. The padding algorithm is to calculate the smallest non-zero number of octets, say N, that must be suffixed to the plain text to bring it up to a multiple of the block size. We will assume the block size is B octets so N is in the range of 1 to B. Pad by suffixing the plain text with N-1 arbitrary pad bytes and a final byte whose value is N. On decryption, just take the last byte and, after sanity checking it, strip that many bytes from the end of the decrypted cipher text.

For example, assume an 8 byte block size and plain text of 0x616263. The padded plain text would then be 0x616263????????05 where the "??" bytes can be any value. Similarly, plain text of 0x2122232425262728 would be padded to 0x2122232425262728??????????????08.

5.2.1 Triple DES

Identifier:
http://www.w3.org/2001/04/xmlenc#tripledes-cbc (REQUIRED)

ANSI X9.52 [TRIPLEDES] specifies three sequential FIPS 46-3 [DES] operations. The XML Encryption TRIPLEDES consists of a DES encrypt, a DES decrypt, and a DES encrypt used in the Cipher Block Chaining (CBC) mode with 192 bits of key and a 64 bit Initialization Vector (IV). Of the key bits, the first 64 are used in the first DES operation, the second 64 bits in the middle DES operation, and the third 64 bits in the last DES operation.

Note: Each of these 64 bits of key contain 56 effective bits and 8 parity bits. Thus there are only 168 operational bits out of the 192 being transported for a TRIPLEDES key. (Depending on the criterion used for analysis, the effective strength of the key may be thought to be 112 bits (due to meet in the middle attacks) or even less.)

The resulting cipher text is prefixed by the IV. If included in XML output, it is then base64 encoded. An example TRIPLEDES EncryptionMethod is as follows:

  <EncryptionMethod
   Algorithm="http://www.w3.org/2001/04/xmlenc#tripledes-cbc"/>

5.2.2 AES

Identifier:
http://www.w3.org/2001/04/xmlenc#aes128-cbc (REQUIRED)
http://www.w3.org/2001/04/xmlenc#aes192-cbc (OPTIONAL)
http://www.w3.org/2001/04/xmlenc#aes256-cbc (REQUIRED)

[AES] is used in the Cipher Block Chaining (CBC) mode with a 128 bit initialization vector (IV). The resulting cipher text is prefixed by the IV. If included in XML output, it is then base64 encoded. An example AES EncryptionMethod is as follows:

  <EncryptionMethod
   Algorithm="http://www.w3.org/2001/04/xmlenc#aes128-cbc"/>

5.3 Stream Encryption Algorithms

Simple stream encryption algorithms generate, based on the key, a stream of bytes which are XORed with the plain text data bytes to produce the cipher text on encryption and with the cipher text bytes to produce plain text on decryption. They are normally used for the encryption of data and are specified by the value of the Algorithm attribute of the EncryptionMethod child of an EncryptedData element.

NOTE: It is critical that each simple stream encryption key (or key and initialization vector (IV) if an IV is also used) be used once only. If the same key (or key and IV) is ever used on two messages then, by XORing the two cipher texts, you can obtain the XOR of the two plain texts. This is usually very compromising.

No specific steam encryption algorithms are specified herein but this section is included to provide general guidelines.

Stream algorithms typically use the optional KeySize explicit parameter. In cases where the key size is not apparent from the algorithm URI or key source, as in the use of key agreement methods, this parameter sets the key size. If the size of the key to be used is apparent and disagrees with the KeySize parameter, an error MUST be returned. Implementation of any stream algorithms is optional. The schema for the KeySize parameter is as follows:

  Schema Definition:

  <simpleType name='KeySizeType'>
    <restriction base="integer"/>
  </simpleType>

5.4 Key Transport

Key Transport algorithms are public key encryption algorithms especially specified for encrypting and decrypting keys. Their identifiers appear as Algorithm attributes to EncryptionMethod elements that are children of EncryptedKey. EncryptedKey is in turn the child of a ds:KeyInfo element. The type of key being transported, that is to say the algorithm in which it is planned to use the transported key, is given by the Algorithm attribute of the EncryptionMethod child of the EncryptedData or EncryptedKey parent of this ds:KeyInfo element.

(Key Transport algorithms may optionally be used to encrypt data in which case they appear directly as the Algorithm attriubte of an EncryptionMethod child of an EncryptedData element. Because they use public key algorithms directly, Key Transport algorithms are not efficient for the transport of any amounts of data significantly larger than symmetric keys.)

The Key Transport algorithms given below are those used in conjunction with the Cryptographic Message Syntax (CMS) of S/MIME [CMS-Algorithms, CMS-AES].

5.4.1 RSA Version 1.5

Identifier:
http://www.w3.org/2001/04/xmlenc#rsa-1_5 (REQUIRED)

The RSAES-PKCS1-v1_5 algorithm, specified in RFC 2437 [PKCS1], takes no explicit parameters. An example of an RSA Version 1.5 EncryptionMethod element is:

  <EncryptionMethod
   Algorithm="http://www.w3.org/2001/04/xmlenc#rsa-1_5"/>

The CipherValue for such an encrypted key is the base64 [MIME] encoding of the octet string computed as per RFC 2437 [PKCS1, section 7.2.1: Encryption operation]. As specified in the EME-PKCS1-v1_5 function RFC 2437 [PKCS1, section 9.1.2.1], the value input to the key transport function is as follows:

   CRYPT ( PAD ( KEY ))

where the padding is of the following special form:

   02 | PS* | 00 | key

where "|" is concatenation, "02" and "00" are fixed octets of the corresponding hexadecimal value, PS is a string of strong pseudo-random octets [RANDOM] at least eight octets long, containing no zero octets, and long enough that the value of the quantity being CRYPTed is one octet shorter than the RSA modulus, and "key" is the key being transported. The key is 192 bits for TRIPLEDES and 128, 192, or 256 bits for AES. Support of this key transport algorithm for transporting 192 bit keys is mandatory to implement. Support of this algorithm for transporting other keys is optional. RAS-OAEP is recommended for the transport of AES keys.

The resulting base64 [MIME] string is the value of the child text node of the CipherData element, e.g.

  <CipherData> IWijxQjUrcXBYoCei4QxjWo9Kg8D3p9tlWoT4
     t0/gyTE96639In0FZFY2/rvP+/bMJ01EArmKZsR5VW3rwoPxw=
  </CipherData>

5.4.2 RSA-OAEP

Identifier:
http://www.w3.org/2001/04/xmlenc#rsa-oaep-mgf1p (REQUIRED)

THE RSAES-OAEP-ENCRYPT, as specified in RFC 2437 [PKCS1], algorithm takes as explicit parameters a message digest function and an optional octet string OAEPparams. The message digest function is indicated by the Algorithm attribute of a child ds:DigestMethod element and the octet string is the base64 decoding of the content of an optional OAEPparams child element.

Schema Definition:

<element ref='ds:DigestMethod' minOccurs='0'/> 
<element name='OAEPparams' minOccurs='0'
         type='base64Binary'/>

An example of an RSA-OAEP element is:

  <EncryptionMethod
     Algorithm="http://www.w3.org/2001/04/xmlenc#rsa-oaep-mgf1p">
     <ds:DigestMethod
        Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>
     <OAEPparams> 9lWu3Q== </OAEPparams>
  <EncryptionMethod>

The CipherValue for an RSA-OAEP encrypted key is the base64 [MIME] encoding of the octet string computed as per RFC 2437 [PKCS1, section 7.1.1: Encryption operation]. As described in the EME-OAEP-ENCODE function RFC 2437 [PKCS1, section 9.1.1.1], the value input to the key transport function is calculated using the message digest function and string specified in the DigestMethod and OAEPparams elements and using the mask generator function MGF1 specified in RFC 2437. The desired output length for EME-OAEP-ENCODE is one byte shorter than the RSA modulus.

The transported key size is 192 bits for TRIPLEDES and 128, 192, or 256 bits for AES. Implementations MUST implement RSA-OAEP for the transport of 128 and 256 bit keys. They MAY implement RSA-OAEP for the transport of other keys.

5.5 Key Agreement

A Key Agreement algorithm provides for the derivation of a shared secret key based on a shared secret computed from certain types of compatible public keys from both the sender and the recipient. Information from the originator to determine the secret is indicated by an optional OriginatorKeyInfo parameter child of an AgreementMethod element while that associated with the recipient is indicated by an optional RecipientKeyInfo. A shared key is derived from this shared secret by a method determined by the Key Agreement algorithm.

Note: XML Encryption does not provide an on-line key agreement negotiation protocol. The AgreementMethod element can be used by the originator to identify the keys and computational procedure that were used to obtain a shared encryption key. The method used to obtain or select the keys or algorithm used for the agreement computation is beyond the scope of this specification.

The AgreementMethod element appears as the content of a ds:KeyInfo since, like other ds:KeyInfo children, it yields a key. This ds:KeyInfo is in turn a child of an EncryptedData or EncryptedKey element. The Algorithm attribute and KeySize child of the EncryptionMethod element under this EncryptedData or EncryptedKey element are implicit parameters to the key agreement computation. In cases where this EncryptionMethod algorithm URI is insufficient to determine the key length, a KeySize MUST have been included. In addition, the sender may place a KA-Nonce element under AgreementMethod to assure that different keying material is generated even for repeated agreements using the same sender and recipient public keys. For example:

 <EncryptedData>
   <EncryptionMethod Algorithm="Example:Block/Alg"
     <KeySize>80</KeySize>
   </EncryptionMethod>
   <ds:KeyInfo xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
     <AgreementMethod Algorithm="Example:Agreement/Algorithm">
       <KA-Nonce>Zm9v</KA-Nonce>
       <DigestMethod
        Algorithm="http://www.w3.org/2001/04/xmlenc#sha1">
       <OriginatorKeyInfo>
         <ds:KeyValue>...originator...</ds:KeyValue>
       </OriginatorKeyInfo>
       <RecipientKeyInfo>
         <ds:KeyValue>...recipient...</ds:KeyValue>
       </RecipientKeyInfo>
     </AgreementMethod>
   </ds:KeyInfo>
   <CipherData>...</CipherData>
</EncryptedData>

If the agreed key is being used to wrap a key, rather than data as above, then AgreementMethod would appear inside a ds:KeyInfo inside an EncryptedKey element.

The Schema for AgreementMethod is as follows:

  Schema Definition:

  <element name="AgreementMethod"
           type="xenc:AgreementMethodType"/>
  <complexType name="AgreementMethodType" mixed="true">
    <sequence>
      <element name="KA-Nonce" minOccurs="0" type="base64Binary"/>
      <element ref="ds:DigestMethod" minOccurs="0"/>
      <element name="OriginatorKeyInfo" minOccurs="0"
               type="ds:KeyInfoType"/>
      <element name="RecipientKeyInfo" minOccurs="0"
               type="ds:KeyInfoType"/>
      <any namespace="##other" minOccurs="0"
                               maxOccurs="unbounded"/>
     </sequence>
   <attribute name="Algorithm" type="anyURI" use="required"/>
   </complexType>

5.5.1 Diffie-Hellman Key Values

Identifier:
http://www.w3.org/2001/04/xmlenc#DHKeyValue (OPTIONAL)

Diffie-Hellman keys can appear directly within KeyValue elements or be obtained by ds:RetrievalMethod fetches as well as appearing in certificates and the like. The above identifier can be used as the value of the Type attribute of Reference or ds:RetrievalMethod elements.

As specified in [ESDH], a DH public key consists of up to six quantities, two large primes p and q, a "generator" g, the public key, and validation parameters "seed" and "pgenCounter". These relate as follows: The public key = ( g**x mod p ) where x is the corresponding private key; p = j*q + 1 where j >= 2. "seed" and "pgenCounter" are optional and can be used to determine if the Diffie-Hellman key has been generated in conformance with the algorithm specified in [ESDH]. Because the primes and generator can be safely shared over many DH keys, they may be known from the application environment and are optional. The schema for a DHKeyValue is as follows:

   Schema:

  <element name="DHKeyValue" type="xenc:DHKeyValueType"/>
  <complexType name="DHKeyValueType">
     <sequence>
        <sequence minOccurs="0">
           <element name="P" type="ds:CryptoBinary"/>
           <element name="Q" type="ds:CryptoBinary"/>
           <element name="Generator"type="ds:CryptoBinary"/>
        </sequence>
        <element name="Public" type="ds:CryptoBinary"/>
        <sequence minOccurs="0">
           <element name="seed" type="ds:CryptoBinary"/>
           <element name="pgenCounter" type="ds:CryptoBinary"/>
        </sequence&gy;
     </sequence>
  </complexType>

5.5.2 Diffie-Hellman Key Agreement

Identifier:
http://www.w3.org/2001/04/xmlenc#dh (OPTIONAL)

The Diffie-Hellman (DH) key agreement protocol [ESDH] involves the derivation of shared secret information based on compatible DH keys from the sender and recipient. Two DH public keys are compatible if they have the same prime and generator. If, for the second one, Y = g**y mod p, then the two parties can calculate the shared secret ZZ = ( g**(x*y) mod p ) even though each knows only their own private key and the other party's public key. Leading zero bytes MUST be maintained in ZZ so it will be the same length, in bytes, as p. The size of p MUST be at least 512 bits and g at least 160 bits. There are numerous other complex security considerations in the selection of g, p, and a random x as described in [ESDH].

Diffie-Hellman key agreement is optional to implement. An example of a DH AgreementMethod element is as follows:

  <AgreementMethod
      Algorithm="http://www.w3.org/2001/04/xmlenc#dh"
      ds:xmlns="http://www.w3.org/2000/09/xmldsig#">
    <KA-Nonce>Zm9v</KA-Nonce>
    <ds:DigestMethod
     Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>
    <OriginatorKeyInfo>
      <ds:X509Data><ds:X509Certificate>
        ...
      </ds:X509Certificate></ds:X509Data>
    </OriginatorKeyInfo>
    <RecipientKeyInfo><ds:KeyValue>
      ...
    </ds:KeyValue></RecipientKeyInfo>
  </AgreementMethod>

Assume the Diffie-Hellman shared secret is the octet sequence ZZ. The shared keying material needed will then be calculated as follows:

  Keying Material = KM(1) | KM(2) | ...

where "|" is byte stream concatenation and

  KM(counter) = DigestAlg ( ZZ | counter | EncryptionAlg |
                KA-Nonce | KeySize )
DigestAlg
The message digest algorithm specified by the DigestMethod child of AgreementMethod.
EncryptionAlg
The URI of the encryption algorithm, including possible key wrap algorithms, in which the derived keying material is to be used ("Example:Block/Alg" in the example above), not the URI of the agreement algorithm. This is the value of the Algorithm attribute of the EncryptionMethod child of the EncryptedData or EncryptedKey grandparent of AgreementMethod.
KA-Nonce
The base64 decoding the content of the KA-Nonce child of AgreementMethod, if present. If the KA-Nonce element is absent, it is null.
Counter
A one byte counter starting at one and incrementing by one. It is expressed as two hex digits where letters A through F are in upper case.
KeySize
The size in bits of the key to be derived from the shared secret as the UTF-8 string for the corresponding decimal integer with only digits in the string and no leading zeros. For some algorithms the key size is inherent in the URI. For others, such as most stream ciphers, it must be explicitly provided.

For example, the initial (KM(1)) calculation for the EncryptionMethod of the Key Agreement example (section 5.5) would be as follows, where the binary one byte counter value of 1 is represented by the two character UTF-8 sequence 01, ZZ is the shared secret, and "foo" is the base64 decoding of "Zm9v".

  SHA-1 ( ZZ01Example:Block/Algfoo80 )

Assuming that ZZ is 0xDEADBEEF, that would be

  SHA-1 ( 0xDEADBEEF4578616D706C652F416C673031666F6F3830 )

whose value is

  0x2D8CD81DB07FB45231524E339FFACF8079E5162C

Each application of DigestAlg for successive values of Counter will produce some additional number of bytes of keying material. From the concatenated string of one or more KM's, enough leading bytes are taken to meet the need for an actual key and the remainder discarded. For example, if DigestAlg is SHA1 which produces 20 octets of hash, then for 128 bit AES the first 16 bytes from KM(1) would be taken and the remaining 4 bytes discarded. For 256 bit AES, all of KM(1) suffixed with the first 12 bytes of KM(2) would be taken and the remaining 8 bytes of KM(2) discarded.

5.6 Symmetric Key Wrap

Symmetric Key Wrap algorithms are shared secret key encryption algorithms especially specified for encrypting and decrypting symmetric keys. Their identifiers appear as Algorithm attribute values to EncryptionMethod elements that are children of EncryptedKey which is in turn a child of ds:KeyInfo which is in turn a child of EncryptedData or another EncryptedKey. The type of the key being wrapped is indicated by the Algorithm attribute of EncryptionMethod child of the parent of the ds:KeyInfo grandparent of the EncryptionMethod specifying the symmetric key wrap algorithm.

5.6.1 CMS Key Checksum

Some key wrap algorithms make use of the key checksum defined in CMS [CMS-Wrap]. This is used to provide an integrity check value for the key being wrapped. The algorithm is

  1. Compute the 20 octet SHA-1 hash on the key being wrapped.
  2. Use the first 8 octets of this hash as the checksum value.

5.6.2 CMS Triple DES Key Wrap

Identifiers and Requirements:
http://www.w3.org/2001/04/xmlenc#kw-tripledes (REQUIRED)

XML Encryption implementations MUST support TRIPLEDES wrapping of 168 bit keys and may optionally support TRIPLEDES wrapping of other keys.

An example of a TRIPLEDES Key Wrap EncryptionMethod element is a as follows:

  <EncryptionMethod
   Algorithm="http://www.w3.org/2001/04/xmlenc#kw-tripledes"/>

The following algorithm wraps (encrypts) a key (the wrapped key, WK) under a TRIPLEDES key-encryption-key (KEK) as specified in [CMS-Algorithms]:

  1. Represent the key being wrapped as an octet sequence. If it is a TRIPLEDES key, this is 24 octets (192 bits) with odd parity bit as the bottom bit of each octet.
  2. Compute the CMS key checksum (section 5.6.1) call this CKS.
  3. Let WKCKS = WK || CKS, where || is concatenation.
  4. Generate 8 random octets [RANDOM] and call this IV.
  5. Encrypt WKCKS in CBC mode using KEK as the key and IV as the initialization vector. Call the results TEMP1.
  6. Left TEMP2 = IV || TEMP1.
  7. Reverse the order of the octets in TEMP2 and call the result TEMP3.
  8. Encrypt TEMP3 in CBC mode using the KEK and an initialization vector of 0x4adda22c79e82105. The resulting cipher text is the desired result. It is 40 octets long if a 168 bit key is being wrapped.

The following algorithm unwraps (decrypts) a key as specified in [CMS-Algorithms]:

  1. Check if the length of the cipher text is reasonable given the key type. It must be 40 bytes for a 168 bit key and either 32, 40, or 48 bytes for a 128, 192, or 256 bit key. If the length is not supported or inconsistent with the algorithm for which the key is intended, return error.
  2. Decrypt the cipher text with TRIPLEDES in CBC mode using the KEK and an initialization vector (IV) of 0x4adda22c79e82105. Call the output TEMP3.
  3. Reverse the order of the octets in TEMP3 and call the result TEMP2.
  4. Decompose TEMP2 into IV, the first 8 octets, and TEMP1, the remaining octets.
  5. Decrypt TEMP1 using TRIPLEDES in CBC mode using the KEK and the IV found in the previous step. Call the result WKCKS.
  6. Decompose WKCKS. CKS is the last 8 octets and WK, the wrapped key, are those octets before the CKS.
  7. Calculate a CMS key checksum (section 5.6.1) over the WK and compare with the CKS extracted in the above step. If they are not equal, return error.
  8. WK is the wrapped key, now extracted for use in data decryption.

5.6.3 AES KeyWrap

Identifiers and Requirements:
http://www.w3.org/2001/04/xmlenc#kw-aes128 (REQUIRED)
http://www.w3.org/2001/04/xmlenc#kw-aes192 (OPTIONAL)
http://www.w3.org/2001/04/xmlenc#kw-aes256 (REQUIRED)

Implementation of AES key wrap is described below, as suggested by NIST. It provides for confidentiality and integrity. This algorithm is defined only for inputs which are a multiple of 64 bits. The information wrapped need not actually be a key. The algorithm is the same whatever the size of the AES key used in wrapping, called the key encrypting key or KEK. The implementation requirements are indicated below.

128 bit AES Key Encrypting Key
Implementation of wrapping 128 bit keys REQUIRED.
Wrapping of other key sizes OPTIONAL.
192 bit AES Key Encrypting Key
All support OPTIONAL.
256 bit AES Key Encrypting Key
Implementation of wrapping 256 bit keys REQUIRED.
Wrapping of other key sizes OPTIONAL.

Assume tha the data to be wrapped consists of N 64-bit data blocks denoted P(1), P(2), P(3) ... P(N). The result of wrapping will be N+1 64-bit blocks denoted C(0), C(1), C(2), ... C(N). They key encrypting key is represented by K. Assume integers i, j, and t and intermediate 64-bit register A, 128-bit register B, and array of 64-bit quantities R(1) through R(N).

"|" represents concatentation so x|y, where x and y and 64-bit quantities, is the 128-bit quantity with x in the most significant bits and y in the least significant bits. AES(K)enc(x) is the operation of AES encrypting the 128-bit quantity x under the key K. AES(K)dec(x) is the corresponding decryption opteration. XOR(x,y) is the bitwise exclusive or of x and y. MSB(x) and LSB(y) are the most significant 64 bits and least significant 64 bits of x and y respectively.

If N is 1, a single AES operation is performed for wrap or unwrap. If N>1, then 6*N AES operations are performed for warp or unwrap.

The key wrap algorithm is as follows:

  1. If N is 1: If N>1, perform the following steps:
  2. Initialize variables:
  3. Calculate intermediate values:
  4. Output the results:

The key unwrap algorithm is as follows:

  1. If N is 1: If N>1, perform the following steps:
  2. Initialize the variables:
  3. Calculate intermediate values:
  4. Output the results:

For example, wrapping the data 0x00112233445566778899AABBCCDDEEFF with the KEK 0x000102030405060708090A0B0C0D0E0F produces the ciphertext of 0x1FA68B0A8112B447, 0xAEF34BD8FB5A7B82, 0x9D3E862371D2CFE5.

5.7 Message Digest

Message digest algorithms can be used in AgreementMethod as part of the key derivation, within RSA-OAEP encryption as a hash function, and in connection with the HMAC message authentication code method as described in [XML-DSIG].)

5.7.1 SHA1

Identifier:
http://www.w3.org/2000/09/xmldsig#sha1 (REQUIRED)

The SHA-1 algorithm [SHA] takes no explicit parameters. XML encryption implementations MUST implement SHA-1. An example of an SHA-1 DigestMethod element is:

   <DigestMethod
    Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>

A SHA-1 digest is a 160-bit string. The content of the DigestValue element shall be the base64 encoding of this bit string viewed as a 20-octet octet stream. For example, the DigestValue element for the message digest:

   A9993E36 4706816A BA3E2571 7850C26C 9CD0D89D

from Appendix A of the SHA-1 standard would be:

   <DigestValue>qZk+NkcGgWq6PiVxeFDCbJzQ2J0=</DigestValue>

5.7.2 SHA256

Identifier:
http://www.w3.org/2001/04/xmlenc#sha256 (RECOMMENDED)

The SHA-256 algorithm [SHA] takes no explicit parameters. It is RECOMMENDED that XML encryption implementations implement SHA-256. An example of an SHA-256 DigestMethod element is:

   <DigestMethod
    Algorithm="http://www.w3.org/2001/04/xmlenc#sha256"/>

A SHA-256 digest is a 256-bit string. The content of the DigestValue element shall be the base64 encoding of this bit string viewed as a 32-octet octet stream.

5.7.3 SHA512

Identifier:
http://www.w3.org/2001/04/xmlenc#sha512 (OPTIONAL)

The SHA-512 algorithm [SHA] takes no explicit parameters. An example of an SHA-512 DigestMethod element is:

   <DigestMethod
    Algorithm="http://www.w3.org/2001/04/xmlenc#sha512"/>

A SHA-512 digest is a 512-bit string. The content of the DigestValue element shall be the base64 encoding of this bit string viewed as a 64-octet octet stream.

5.7.4 RIPEMD-160

Identifier:
http://www.w3.org/2001/04/xmlenc#ripemd160 (OPTIONAL)

The RIPEMD-160 algorithm [RIPEMD-160] takes no explicit parameters. An example of an RIPEMD-160 DigestMethod element is:

   <DigestMethod
    Algorithm="http://www.w3.org/2001/04/xmlenc#ripemd160"/>

A RIPEMD-160 digest is a 160-bit string. The content of the DigestValue element shall be the base64 encoding of this bit string viewed as a 20-octet octet stream.

5.8 Message Authentication

Identifier:
http://www.w3.org/2000/09/xmldsig# (RECOMMENDED)

XML Signature [XML-DSIG] is optional to implement for XML encryption applications. It is the recommended way to provide key based authentication.

5.9 Canonicalization

A Canonicalization of XML is a method of consistently serializing XML into an octet stream as is necessary prior to encrypting XML.

5.9.1 Inclusive Canonicalization

Identifiers:
http://www.w3.org/TR/2001/REC-xml-c14n-20010315 (OPTIONAL)
http://www.w3.org/TR/2001/REC-xml-c14n-20010315#WithComments (OPTIONAL)

Canonical XML [Canon] is a method of serializing XML which includes the in scope namespace and xml namespace attribute context from ancestors of the XML being serialized.

If XML is to be encrypted and then later decrypted into a different environment and it is desired to preserve namespace prefix bindings and the value of attributes in the "xml" namespace of its original environment, then the canonical XML with comments version of the XML should be the serialization that is encrypted.

5.9.2 Exclusive Canonicalization

Identifiers:
http://www.w3.org/2001/10/xml-exc-c14n# (OPTIONAL)
http://www.w3.org/2001/10/xml-exc-c14n#WithComments (OPTIONAL)

Exclusive XML Canonicalization [Exclusive] serializes XML in such a way as to include to the minimum extent practical the namespace prefix binding and xml namespace attribute context inherited from ancestor elements.

It is the recommended method where the outer context of a fragment which was signed and then encrypted may be changed. Otherwise the validation of the signature over the fragment may fail because the canonicalization by signature validation may include unnecessary namespaces into the fragment.

6 Security Considerations

6.1 Relationship to XML Digital Signatures

The application of both encryption and digital signatures over portions of an XML document can make subsequent decryption and signature verification difficult. In particular, when verifying a signature one must know whether the signature was computed over the encrypted or unencrypted form of elements.

A separate, but important, issue is introducing cryptographic vulnerabilities when combining digital signatures and encryption over a common XML element. Hal Finney has suggested that encrypting digitally signed data, while leaving the digital signature in the clear, may allow plaintext guessing attacks. This vulnerability can be mitigated by using secure hashes and the nonces in the text being processed.

In accordance with the requirements document [EncReq] the interaction of encryption and signing is an application issue and out of scope of the specification. However, we make the following recommendations:

  1. When data is encrypted, any digest or signature over that data should be encrypted. This satisfies the first issue in that only those signatures that can be seen can be validated. It also addresses the possibility of a plaintext guessing vulnerability, though it may not be possible to identify (or even know of) all the signatures over a given piece of data.
  2. Employ the "decrypt-except" signature transform [XML-DSIG-Decrypt]. It works as follows: during signature transform processing, if you encounter a decrypt transform, decrypt all encrypted content in the document except for those excepted by an enumerated set of references. This specification will also need to address vulnerabilities arising from plaintext guessing attacks in a similar way.

Additionally, while the following warnings pertain to incorrect inferences by the user about the authenticity of information encrypted, applications should discourage user misapprehension by communicating clearly which information has integrity, or is authenticated, confidential, or non-repudiable when multiple processes (e.g., signature and encryption) and algorithms (e.g., symmetric and asymmetric) are used:

  1. When an encrypted envelope contains a signature, the signature does not necessarily protect the authenticity or integrity of the ciphertext [Davis] .
  2. While the signature secures plaintext it only covers that which is signed, recipients of encrypted messages must not infer integrity or authenticity of other unsigned information (e.g., headers) within the encrypted envelope, see [XML-DSIG, 8.1.1 Only What is Signed is Secure].

6.2 Information Revealed

Where a symmetric key is shared amongst multiple recipients, that symmetric key should only be used for the data intended for all recipients; even if one recipient is not directed to information intended (exclusively) for another in the same symmetric key, the information might be discovered and decrypted.

Additionally, application designers should be careful not to reveal any information in parameters or algorithm identifiers (e.g., information in a URI) that weakens the encryption.

6.3 Nonce and IV (Initializaiton Value or Vector)

An undesirable characteristic of many encryption algorithms and/or their modes is that the same plaintext when encrypted with the same key has the same resulting ciphertext. While this is unsurprising, it invites various attacks which are mitigated by including an arbitrary and non-repeating (under a given key) data with the plaintext prior to encryption. In encryption chaining modes this data is the first to be encrypted and is consequently called the IV (initalization value or vector).

Different algorithms and modes have further requirements on the characteristic of this information (e.g., randomness and secrecy) that affect the features (e.g., confidentiality and integrity) and their resistence to attack.

Given that XML data is redundant (e.g., Unicode encodings and repeated tags ) and that attackers may know the data's structure (e.g., DTDs and schemas) encryption algorithms must be carefully implemented and used in this regard.

For the Cipher Block Chaining (CBC) mode used by this specification, the IV must not be reused for any key and should be random, but it need not be secret. Additionally, under this mode an adversary modifying the IV can make a known change in the plain text after decryption. This attack can be avoided by securing the integrity of the plain text data, for example by signing it.

7 Schema and Valid Examples

Schema
xenc-schema.xsd
Example
enc-example.xml

8 References

TRIPLEDES
ANSI X9.52: Triple Data Encryption Algorithm Modes of Operation. 1998.
AES
NIST FIPS 197: Advanced Encryption Standard (AES). November 2001.
http://csrc.nist.gov/publications/fips/fips197/fips-197.pdf
CMS-AES
Use of the Advanced Encryption Algorithm in CMS. Internet-Draft. J. Schaad, R. Housley. July 2001.
http://www.ietf.org/internet-drafts/draft-ietf-smime-aes-alg-04.txt
CMS-Algorithms
Cryptographic Message Syntax (CMS) Algorithms. Internet-Draft. R. Housley. September 2001.
http://www.ietf.org/internet-drafts/draft-ietf-smime-cmsalg-07.txt
CMS-Wrap
Triple-DES and RC2 Key Wrapping. Internet Draft. R. Housely. September 2001.
http://www.ietf.org/internet-drafts/draft-ietf-smime-key-wrap-01.txt
Davis
Defective Sign & Encrypt in S/MIME, PKCS#7, MOSS, PEM, PGP, and XML. D. Davis. USENIX Annual Technical Conference. 2001.
http://www.usenix.org/publications/library/proceedings/usenix01/davis.html
DES
NIST FIPS 46-3: Data Encryption Standard (DES). October 1999.
http://csrc.nist.gov/publications/fips/fips46-3/fips46-3.pdf
DOM
Document Object Model (DOM) Level 1 Specification. Recommendation. V. Apparao, S. Byrne, M. Champion, S. Isaacs, I. Jacobs, A. Le Hors, G. Nicol, J. Robie, R. Sutor, C. Wilson, L. Wood. W3C Recommendation, October 1998.
http://www.w3.org/TR/1998/REC-DOM-Level-1-19981001/
EncReq
XML Encryption Requirements. W3C Note. J. Reagle. W3C, March 2002.
http://www.w3.org/TR/2002/NOTE-xml-encryption-req-20020304
ESDH
RFC 2631: Diffie-Hellman Key Agreement Method. Standards Track. E. Rescorla. 1999.
http://www.ietf.org/rfc/rfc2631.txt
Exclusive
Exclusive Canonicalization. W3C Candidate Recommendation. February 2002.
http://www.w3.org/TR/2002/CR-xml-exc-c14n-20020212
Glossary
RFC 2828. Internet Security Glossary. Informational. R Shirey. 2000
http://www.ietf.org/rfc/rfc2828.txt
HMAC
RFC 2104: HMAC: Keyed-Hashing for Message Authentication. Informational. H. Krawczyk, M. Bellare, R. Canetti. February 1997.H. Krawczyk, M. Bellare, R. Canetti. February 1997.
http://www.ietf.org/rfc/rfc2104.txt
HTTP
RFC 2616: Hypertext Transfer Protocol -- HTTP/1.1. Standards Track. J. Gettys, J. Mogul, H. Frystyk, L. Masinter, P. Leach, T. Berners-Lee. June 1999.J. Gettys, J. Mogul, H. Frystyk, L. Masinter, P. Leach, T. Berners-Lee. June 1999.
http://www.ietf.org/rfc/rfc2616.txt
InfoSet
XML Information Set. J. Cowan and R. Tobin. W3C Recommendation, October 2001.
KEYWORDS
RFC 2119: Key words for use in RFCs to Indicate Requirement Levels. Best Current Practice. S. Bradner. March 1997.
http://www.ietf.org/rfc/rfc2119.txt
MD5
RFC 1321: The MD5 Message-Digest Algorithm. Informational. R. Rivest. April 1992.
http://www.ietf.org/rfc/rfc1321.txt
MIME
RFC 2045: Multipurpose Internet Mail Extensions (MIME) Part One: Format of Internet Message Bodies. Standards Track. N. Freed & N. Borenstein. November 1996.
http://www.ietf.org/rfc/rfc2045.txt
NFC
TR15, Unicode Normalization Forms. M. Davis, M. Dürst. Revision 18: November 1999. http://www.unicode.org/unicode/reports/tr15/tr15-18.html.
NFC-Corrigendum
Normalization Corrigendum . The Unicode Consortium. http://www.unicode.org/unicode/uni2errata/Normalization_Corrigendum.html.
prop1
XML Encryption strawman proposal. E. Simon and B. LaMacchia. Aug 09 2000.
http://lists.w3.org/Archives/Public/xml-encryption/2000Aug/0001.html
prop2
Another proposal of XML Encryption. T.i Imamura. Aug 14 2000.
http://lists.w3.org/Archives/Public/xml-encryption/2000Aug/0005.html
prop3
XML Encryption Syntax and Processing . B. Dillaway, B. Fox, T. Imamura, B. LaMacchia, H. Maruyama, J. Schaad, E. Simon. December 2000.
http://lists.w3.org/Archives/Public/xml-encryption/2000Dec/att-0024/01-XMLEncryption_v01.html
PKCS1
RFC 2437: PKCS #1: RSA Cryptography Specifications Version 2.0. Informational. B. Kaliski, J. Staddon. October 1998.
http://www.ietf.org/rfc/rfc2437.txt
RANDOM
RFC 1750: Randomness Recommendations for Security. Informational. D. Eastlake, S. Crocker, J. Schiller. December 1994.
http://www.ietf.org/rfc/rfc1750.txt
RIPEMD-160
CryptoBytes, Volume 3, Number 2. The Cryptographic Hash Function RIPEMD-160. RSA Laboratories. Autumn 1997.
ftp://ftp.rsasecurity.com/pub/cryptobytes/crypto3n2.pdf
http://www.esat.kuleuven.ac.be/~cosicart/pdf/AB-9601/AB-9601.pdf
SHA
Secure Hash Standard. NIST FIPS 180-1. April 1995.
http://www.itl.nist.gov/fipspubs/fip180-1.htm
(Being extended to cover SHA-256 and SHA-512. See Draft FIPS 180-2.)
(http://csrc.nist.gov/encryption/shs/dfips-180-2.pdf
UTF-16
RFC 2781: UTF-16, an encoding of ISO 10646. Informational. P. Hoffman , F. Yergeau. February 2000.
http://www.ietf.org/rfc/rfc2781.txt
UTF-8
RFC 2279: UTF-8, a transformation format of ISO 10646F. Standards Track. Yergeau. January 1998.
http://www.ietf.org/rfc/rfc2279.txt
URI
RFC 2396: Uniform Resource Identifiers (URI): Generic Syntax. Standards Track. T. Berners-Lee, R. Fielding, L. Masinter. August 1998.
http://www.ietf.org/rfc/rfc2396.txt
http://www.ietf.org/rfc/rfc1738.txt
http://www.ietf.org/rfc/rfc2141.txt
RFC 2611: URN Namespace Definition Mechanisms. Best Current Practices. Daigle, D. van Gulik, R. Iannella, P. Falstrom. June 1999.
http://www.ietf.org/rfc/rfc2611.txt
X509v3
ITU-T Recommendation X.509 version 3 (1997). "Information Technology - Open Systems Interconnection - The Directory Authentication Framework"  ISO/IEC 9594-8:1997.
XML
Extensible Markup Language (XML) 1.0 (Second Edition). T. Bray, J. Paoli, C. M. Sperberg-McQueen, E. Maler. W3C Recommendation, October 2000.
XML-C14N
Canonical XML. J. Boyer. W3C Recommendation, March 2001.
http://www.w3.org/TR/2001/REC-xml-c14n-20010315
http://www.ietf.org/rfc/rfc3076.txt
XML-DSIG
XML-Signature Syntax and Processing. D. Eastlake, J. Reagle, and D. Solo. W3C Recommendation, February 2002.
http://www.w3.org/TR/2002/REC-xmldsig-core-20020212/
XML-DSIG-Decrypt
Decryption Transform for XML Signature. T. Imamura and H. Maruyama. W3C Candidate Recommendation, March 2002.
http://www.w3.org/TR/2002/CR-xmlenc-decrypt-20020304
XML-MT
RFC 3023: XML Media Types. Informational. M. Murata, S. St.Laurent, D Kohn. January 2001.
http://www.ietf.org/rfc/rfc2376.txt
XML-NS
Namespaces in XML. T. Bray, D. Hollander, A. Layman. W3C Recommendation, January 1999.
http://www.w3.org/TR/1999/REC-xml-names-19990114
XML-schema
XML Schema Part 1: Structures D. Beech, M. Maloney, N. Mendelsohn. W3C Recommendation, May 2001.
http://www.w3.org/TR/2001/REC-xmlschema-1-20010502/
XML Schema Part 2: Datatypes. P. Biron, A. Malhotra. W3C Recommendation, May 2001.
http://www.w3.org/TR/2001/REC-xmlschema-2-20010502/