PACKAGE NAME: aaa_base-13.37-x86_64-2.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 10 K PACKAGE SIZE (uncompressed): 90 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: aaa_base: aaa_base (Basic Linux filesystem package) aaa_base: aaa_base: Sets up the empty directory tree for Slackware and adds an email to aaa_base: root's mailbox welcoming them to Linux. :) This package should be aaa_base: installed first, and never uninstalled. aaa_base: aaa_base: aaa_base: aaa_base: aaa_base: aaa_base: PACKAGE NAME: aaa_elflibs-13.37-x86_64-2.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 4105 K PACKAGE SIZE (uncompressed): 13770 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: aaa_elflibs: aaa_elflibs (shared libraries needed by many programs) aaa_elflibs: aaa_elflibs: This is a collection of shared libraries needed to run Linux programs. aaa_elflibs: ELF (Executable and Linking Format) is the standard Linux binary aaa_elflibs: format. These libraries are gathered from other Slackware packages aaa_elflibs: and are intended to give a fairly complete initial set of libraries. aaa_elflibs: This package should be not upgraded or reinstalled (it could copy aaa_elflibs: over newer library versions). aaa_elflibs: aaa_elflibs: aaa_elflibs: PACKAGE NAME: aaa_terminfo-5.8-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 42 K PACKAGE SIZE (uncompressed): 720 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: aaa_terminfo: aaa_terminfo (a basic collection of terminfo entries) aaa_terminfo: aaa_terminfo: This is a starter set of files from the terminfo database, which aaa_terminfo: should be enough in most cases. The complete set (from which this aaa_terminfo: is derived) can be found in the ncurses package. aaa_terminfo: aaa_terminfo: The terminfo database describes the characteristics of terminals, so aaa_terminfo: don't try to log in without this package. :-) aaa_terminfo: aaa_terminfo: aaa_terminfo: PACKAGE NAME: acl-2.2.47_1-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 128 K PACKAGE SIZE (uncompressed): 440 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: acl: acl (tools for using POSIX Access Control Lists) acl: acl: This package contains a set of tools and libraries for manipulating acl: POSIX Access Control Lists. POSIX Access Control Lists (defined in acl: POSIX 1003.1e draft standard 17) are used to define more fine-grained acl: discretionary access rights for files and directories. acl: acl: acl: acl: acl: PACKAGE NAME: acpid-2.0.7-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 38 K PACKAGE SIZE (uncompressed): 150 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: acpid: acpid (ACPI daemon) acpid: acpid: Most modern computers support the Advanced Configuration and Power acpid: Interface (ACPI) standard to allow intelligent power management. acpid: This package contains acpid, which is the user-space daemon needed in acpid: order to make the Linux ACPI support completely functional. acpid: acpid: ACPI must be compiled into the kernel to run acpid. acpid: acpid: acpid: PACKAGE NAME: apmd-3.2.2-x86_64-2.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 53 K PACKAGE SIZE (uncompressed): 200 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: apmd: apmd (Advanced Power Management daemon) apmd: apmd: apmd is an APM monitoring daemon, and works in conjunction with the apmd: APM BIOS driver in the kernel. Apmd (and the included tools) handle apmd: tasks such as automatically putting a laptop into suspend when the apmd: power level drop below a certain point. This package also includes apmd: the graphical power management tools xapm and xbattery. apmd: apmd: The apmd tools were written by Rik Faith and are maintained by apmd: Avery Pennarun. xbattery was written by Nathan Sidwell. apmd: PACKAGE NAME: attr-2.4.43_1-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 69 K PACKAGE SIZE (uncompressed): 260 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: attr: attr (tools for using extended attributes on filesystems) attr: attr: This package contains a set of tools for manipulating extended attr: attributes (name:value pairs associated permanently with files and attr: directories) on filesystem objects, and the library and header files attr: needed to develop programs which make use of extended attributes. attr: Extended attributes are used to provide additional functionality to attr: a filesystem. For example, Access Control Lists (ACLs) are attr: implemented using extended attributes. attr: attr: PACKAGE NAME: bash-4.1.010-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 943 K PACKAGE SIZE (uncompressed): 3770 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: bash: bash (sh-compatible shell) bash: bash: The GNU Bourne-Again SHell. Bash is a sh-compatible command bash: interpreter that executes commands read from the standard input or bash: from a file. Bash also incorporates useful features from the Korn bash: and C shells (ksh and csh). Bash is ultimately intended to be a bash: conformant implementation of the IEEE Posix Shell and Tools bash: specification (IEEE Working Group 1003.2). bash: bash: Bash must be present for the system to boot properly. bash: PACKAGE NAME: bin-11.1-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 43 K PACKAGE SIZE (uncompressed): 200 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: bin: bin (some command-line utilities) bin: bin: The bin package is a collection of miscellaneous command-line bin: utilities. Some of these (such as 'tempfile') are used in system bin: scripts. bin: bin: bin: bin: bin: bin: PACKAGE NAME: bzip2-1.0.6-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 124 K PACKAGE SIZE (uncompressed): 560 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: bzip2: bzip2 (a block-sorting file compressor) bzip2: bzip2: Bzip2 compresses files using the Burrows-Wheeler block sorting text bzip2: compression algorithm, and Huffman coding. Compression is generally bzip2: considerably better than that achieved by more conventional LZ77/LZ78- bzip2: based compressors, and approaches the performance of the PPM family of bzip2: statistical compressors. bzip2: bzip2: Julian Seward is the author of bzip2. bzip2: bzip2: PACKAGE NAME: coreutils-8.10-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 2117 K PACKAGE SIZE (uncompressed): 12950 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: coreutils: coreutils (core GNU utilities) coreutils: coreutils: These are the GNU core utilities, the basic command line programs coreutils: such as 'mkdir', 'ls', and 'rm' that are needed for the system to coreutils: run. This package is the union of the GNU fileutils, sh-utils, and coreutils: textutils packages. Most of these programs have significant coreutils: advantages over their Unix counterparts, such as greater speed, coreutils: additional options, and fewer arbitrary limits. coreutils: coreutils: coreutils: PACKAGE NAME: cpio-2.11-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 178 K PACKAGE SIZE (uncompressed): 830 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: cpio: cpio (backup and archiving utility) cpio: cpio: This is GNU cpio, a program to manage archives of files. This package cpio: also includes mt, a tape drive control program. cpio copies files into cpio: or out of a cpio or tar archive, which is a file that contains other cpio: files plus information about them, such as their pathname, owner, cpio: timestamps, and access permissions. The archive can be another file on cpio: the disk, a magnetic tape, or a pipe. cpio: cpio: cpio: PACKAGE NAME: cpufrequtils-008-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 34 K PACKAGE SIZE (uncompressed): 160 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: cpufrequtils: cpufrequtils (Kernel CPUfreq utilities) cpufrequtils: cpufrequtils: The cpufrequtils package makes access to the Linux kernel CPUfreq cpufrequtils: subsystem easier for users and cpufreq userspace tools. It contains cpufrequtils: a library used by other programs (libcpufreq), and command line tools cpufrequtils: to determine current CPUfreq settings and to modify them. cpufrequtils: cpufrequtils: Dominik Brodowski is the cpufrequtils maintainer. cpufrequtils: The cpufrequtils page is hosted on kernel.org: cpufrequtils: http://www.kernel.org/pub/linux/utils/kernel/cpufreq/cpufreq.html cpufrequtils: PACKAGE NAME: cryptsetup-1.2.0-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 114 K PACKAGE SIZE (uncompressed): 460 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: cryptsetup: cryptsetup (utility for setting up encrypted filesystems) cryptsetup: cryptsetup: LUKS is a standard for cross-platform hard disk encryption. cryptsetup: It provides secure management of multiple userpasswords and cryptsetup: stores setup information in the partition header. cryptsetup: LUKS for dm-crypt is now implemented in cryptsetup replacing the cryptsetup: original cryptsetup. It provides all the functionally of the cryptsetup: original version plus all LUKS features. cryptsetup: cryptsetup: cryptsetup home: http://code.google.com/p/cryptsetup/ cryptsetup: PACKAGE NAME: cups-1.4.6-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 2045 K PACKAGE SIZE (uncompressed): 12350 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: cups: CUPS (Common UNIX Printing System) cups: cups: The Common UNIX Printing System provides a portable printing layer for cups: UNIX(R)-like operating systems. It has been developed by Easy Software cups: Products to promote a standard printing solution for all UNIX vendors cups: and users. CUPS uses the Internet Printing Protocol ("IPP") as the cups: basis for managing print jobs and queues. The CUPS package includes cups: System V and Berkeley command-line interfaces, a PostScript RIP cups: package for supporting non-PostScript printer drivers, and tools for cups: creating additional printer drivers and other CUPS services. cups: PACKAGE NAME: cxxlibs-6.0.14-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 854 K PACKAGE SIZE (uncompressed): 5380 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: cxxlibs: cxxlibs (C++ shared library compatibility package) cxxlibs: cxxlibs: This package contains the shared libraries needed to run dynamically cxxlibs: linked C++ binaries linked with older versions of libstdc++. cxxlibs: cxxlibs: cxxlibs: cxxlibs: cxxlibs: cxxlibs: cxxlibs: PACKAGE NAME: dbus-1.4.1-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 331 K PACKAGE SIZE (uncompressed): 1380 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: dbus: dbus (D-Bus message bus system) dbus: dbus: D-Bus supplies both a system daemon (for events such as "new hardware dbus: device added" or "printer queue changed") and a per user login dbus: session daemon (for general IPC needs among user applications). dbus: Also, the message bus is built on top of a general one-to-one message dbus: passing framework, which can be used by any two apps to communicate dbus: directly (without going through the message bus daemon). dbus: dbus: dbus: PACKAGE NAME: dcron-4.4-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 31 K PACKAGE SIZE (uncompressed): 100 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: dcron: dcron (Dillon's Cron daemon) dcron: dcron: The cron daemon runs in the background and executes tasks on behalf of dcron: users at the appropriate time. Many timed system tasks are started dcron: with cron, such as the nightly indexing with updatedb. dcron: dcron: dcron was written entirely from scratch by Matthew Dillon. dcron: dcron: dcron: dcron: PACKAGE NAME: devs-2.3.1-noarch-25.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 96 K PACKAGE SIZE (uncompressed): 5020 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: devs: devs (system device files) devs: devs: This package creates special files in the /dev directory that devs: represent your system's hardware, and a tool (/dev/MAKEDEV) for devs: creating new device files. These files are required to access devs: hardware on a Linux system. devs: devs: devs: devs: devs: PACKAGE NAME: dialog-1.1_20100428-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 127 K PACKAGE SIZE (uncompressed): 440 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: dialog: dialog (display dialog boxes from shell scripts) dialog: dialog: Dialog is a program to present a variety of questions or display dialog: messages using dialog boxes from a shell script. The Slackware dialog: package management script "pkgtool" uses this, as do various other dialog: menu-driven console scripts. dialog: dialog: Dialog was originally contributed to Slackware by Savio Lam, and has dialog: been contributed to by many. Dialog is currently maintained by dialog: Thomas E. Dickey. dialog: PACKAGE NAME: dosfstools-3.0.11-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 63 K PACKAGE SIZE (uncompressed): 210 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: dosfstools: dosfstools (tools for working with FAT filesystems) dosfstools: dosfstools: Utilities for creating FAT filesystems (mkdosfs), and for checking dosfstools: and repairing them (dosfsck). dosfstools: dosfstools: dosfstools: dosfstools: dosfstools: dosfstools: dosfstools: PACKAGE NAME: e2fsprogs-1.41.14-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 659 K PACKAGE SIZE (uncompressed): 2990 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: e2fsprogs: e2fsprogs (ext2 and ext3 filesystems utilities) e2fsprogs: e2fsprogs: Utilities needed to create and maintain ext2 and ext3 filesystems. e2fsprogs: e2fsprogs: These utilities were written by Remy Card (the developer and e2fsprogs: maintainer of the ext2 fs) and Theodore T'so. e2fsprogs: e2fsprogs: e2fsprogs: e2fsprogs: e2fsprogs: PACKAGE NAME: e2fsprogs-libs-1.41.14-x86_64-1vl70.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 44 K PACKAGE SIZE (uncompressed): 190 K PACKAGE REQUIRED: util-linux-ng >= 2.16 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: e2fsprogs-libs: e2fsprogs (e2fsprogs libraries) e2fsprogs-libs: e2fsprogs-libs: e2fsprogs libraries. e2fsprogs-libs: e2fsprogs-libs: These libraries were written by Remy Card (the developer and e2fsprogs-libs: maintainer of the ext2 fs) and Theodore T'so. e2fsprogs-libs: e2fsprogs-libs: http://e2fsprogs.sourceforge.net/ e2fsprogs-libs: e2fsprogs-libs: e2fsprogs-libs: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: ed-1.4-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 62 K PACKAGE SIZE (uncompressed): 140 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: ed: ed (text editor) ed: ed: GNU ed is an 8-bit clean, more or less POSIX-compliant implementation ed: of the standard Unix line editor. These days, full-screen editors ed: have rendered 'ed' mostly of historical interest. Nonetheless, it ed: appeals to a handful of aging programmers who still believe that ed: "Small is Beautiful". ed: ed: ed: ed: PACKAGE NAME: eject-2.1.5-x86_64-2.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 33 K PACKAGE SIZE (uncompressed): 160 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: eject: eject (a tool to eject removable media) eject: eject: Eject allows removable media (typically a DVD, CD, floppy disk, tape, eject: etc.) to be ejected under software control. The command can also eject: control some multi-disc changers, the auto-eject feature supported by eject: some devices, and can close the disc tray of some drives. eject: eject: The 'eject' program was written by Jeff Tranter. eject: eject: eject: PACKAGE NAME: etc-13.013-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 202 K PACKAGE SIZE (uncompressed): 830 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: etc: etc (system configuration files) etc: etc: System configuration files. The /etc directory is traditionally the etc: location where configuration files are found. etc: etc: etc: etc: etc: etc: etc: PACKAGE NAME: file-5.05-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 209 K PACKAGE SIZE (uncompressed): 930 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: file: file (a utility to determine file type) file: file: This is Ian F. Darwin's 'file' utility, used to identify files. file: Christos Zoulas has been file's maintainer since 1994. file: file: file: file: file: file: file: PACKAGE NAME: findutils-4.4.2-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 404 K PACKAGE SIZE (uncompressed): 1510 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: findutils: findutils (utilities to locate files) findutils: findutils: This package contains the GNU find and xargs programs. The find and findutils: xargs implementations comply with POSIX 1003.2. They also support findutils: some additional options, some borrowed from Unix and some unique to findutils: GNU. findutils: findutils: findutils: findutils: findutils: PACKAGE NAME: firmware-1.1-noarch-3vl70.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 2461 K PACKAGE SIZE (uncompressed): 10270 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: firmware: A package of various firmware files from /lib/firmware firmware: firmware: PACKAGE NAME: floppy-5.4-x86_64-3.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 342 K PACKAGE SIZE (uncompressed): 850 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: floppy: floppy (floppy disk utilities) floppy: floppy: Contains fdutils-5.4, tools to test and format floppy disks; and floppy: mtools-3.9.8, a collection of utilities for using DOS/Windows floppy floppy: disks with Linux. floppy: floppy: floppy: floppy: floppy: floppy: PACKAGE NAME: gawk-3.1.8-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 777 K PACKAGE SIZE (uncompressed): 2300 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gawk: gawk (pattern scanning and processing language) gawk: gawk: Gawk is the GNU Project's implementation of the AWK programming gawk: language. It conforms to the definition of the language in the POSIX gawk: 1003.2 Command Language And Utilities Standard. This version in turn gawk: is based on the description in The AWK Programming Language, by Aho, gawk: Kernighan, and Weinberger, with the additional features found in the gawk: System V Release 4 version of UNIX awk. Gawk also provides more gawk: recent Bell Labs awk extensions, and some GNU-specific extensions. gawk: gawk: PACKAGE NAME: genpower-1.0.5-x86_64-2.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 41 K PACKAGE SIZE (uncompressed): 160 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: genpower: genpower (UPS monitoring daemon) genpower: genpower: The genpower daemon, genpowerd, will monitor the status of a serial genpower: line connected to a UPS (Uninterruptible Power Supply). If a power genpower: failure is detected, genpowerd will notify the system to take the genpower: needed steps to react to the condition of the UPS. This may include genpower: shutting the system down, or canceling a pending shutdown if the genpower: power is restored. genpower: genpower: genpower: PACKAGE NAME: gettext-0.18.1.1-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 110 K PACKAGE SIZE (uncompressed): 800 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gettext: gettext (internationalization framework) gettext: gettext: The GNU gettext package contains "gettext" and "ngettext", programs gettext: that are used to internationalize the messages given by shell scripts. gettext: gettext: gettext: gettext: gettext: gettext: gettext: PACKAGE NAME: glibc-solibs-2.13-x86_64-3.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 2380 K PACKAGE SIZE (uncompressed): 11300 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: glibc-solibs: glibc-solibs (shared GNU C libraries) glibc-solibs: glibc-solibs: This package contains the shared libraries, binaries, and support glibc-solibs: files required to run most Linux applications linked with glibc. glibc-solibs: glibc-solibs: glibc-solibs: glibc-solibs: glibc-solibs: glibc-solibs: glibc-solibs: PACKAGE NAME: glibc-zoneinfo-2.13-noarch-3.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 153 K PACKAGE SIZE (uncompressed): 3170 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: glibc-zoneinfo: glibc-zoneinfo (timezone database) glibc-zoneinfo: glibc-zoneinfo: This package allows you to configure your time zone. glibc-zoneinfo: glibc-zoneinfo: This timezone database comes from the tzdata and tzcode packages by glibc-zoneinfo: Arthur David Olson et.al. The latest version and more information glibc-zoneinfo: may be found at ftp://elsie.nci.nih.gov/pub/ glibc-zoneinfo: glibc-zoneinfo: Use the timeconfig utility to set your local time zone. glibc-zoneinfo: glibc-zoneinfo: PACKAGE NAME: gpm-1.20.1-x86_64-5.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 186 K PACKAGE SIZE (uncompressed): 610 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gpm: gpm (general purpose mouse server) gpm: gpm: The general purpose mouse server, or gpm, allows you to use the mouse gpm: to cut and paste text from the screen. It also acts as a mouse gpm: server for applications running on the Linux console, such as the gpm: Midnight Commander file manager. gpm: gpm: NOTE: This program may cause problems when you start X on systems gpm: that do not use a serial mouse. If you get an 'unable to open mouse gpm: device' error from X, disable /etc/rc.d/rc.gpm. gpm: PACKAGE NAME: grep-2.7-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 237 K PACKAGE SIZE (uncompressed): 960 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: grep: grep (print lines matching a pattern) grep: grep: This is GNU grep, the "fastest grep in the west" (we hope). Grep grep: searches through textual input for lines which contain a match to a grep: specified pattern and then prints the matching lines. grep: grep: grep: grep: grep: grep: PACKAGE NAME: grub2-1.99~rc1-i586-2vl70.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 1544 K PACKAGE SIZE (uncompressed): 6970 K PACKAGE REQUIRED: freetype >= 2.4.4-i586-1vl70,glibc-solibs >= 2.12.2-i486-1,lvm2 >= 2.02.81-i486-1,udev >= 165-i486-2,xz >= 5.0.0-i486-1,zlib >= 1.2.5-i486-3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: grub2: grub2 () grub2: grub2: grub2: grub2: grub2: grub2: grub2: License: GPL grub2: Authors: grub2: Website: PACKAGE NAME: gzip-1.4-x86_64-1.tgz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 124 K PACKAGE SIZE (uncompressed): 290 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gzip: gzip (file compression utility) gzip: gzip: Gzip reduces the size of the named files using Lempel-Ziv coding gzip: (LZ77). Whenever possible, each file is replaced by one with the gzip: extension .gz, while keeping the same ownership modes, access and gzip: modification times. gzip: gzip: gzip: gzip: gzip: PACKAGE NAME: hdparm-9.37-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 62 K PACKAGE SIZE (uncompressed): 150 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: hdparm: hdparm (read/set hard drive parameters) hdparm: hdparm: hdparm provides a command line interface to various hard disk ioctls hdparm: supported by the Linux ATA/IDE device driver subsystem. This may be hdparm: required to enable higher-performing disk modes. hdparm: hdparm: hdparm was written by Mark Lord. hdparm: hdparm: hdparm: hdparm: PACKAGE NAME: infozip-6.0-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 395 K PACKAGE SIZE (uncompressed): 1280 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: infozip: infozip (Info-ZIP's zip and unzip utilities) infozip: infozip: zip is a compression and file packaging utility for Unix, VMS, MSDOS, infozip: OS/2, Windows NT, Minix, Atari and Macintosh, Amiga and Acorn RISC OS. infozip: It is analogous to a combination of the UNIX commands tar(1) and infozip: compress(1) and is compatible with PKZIP (Phil Katz's ZIP). A infozip: companion program (unzip(1L)), unpacks zip archives. infozip: infozip: infozip: infozip: PACKAGE NAME: inotify-tools-3.14-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 42 K PACKAGE SIZE (uncompressed): 150 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: inotify-tools: inotify-tools (command line utilities for inotify) inotify-tools: inotify-tools: inotify-tools is a set of command-line programs for Linux providing a inotify-tools: simple interface to inotify. These programs can be used to monitor inotify-tools: and act upon filesystem events. inotify-tools: inotify-tools: For more information see the inotifywait and inotifywatch man pages. inotify-tools: inotify-tools: inotify-tools home: http://inotify-tools.sourceforge.net/ inotify-tools: inotify-tools: PACKAGE NAME: jfsutils-1.1.14-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 194 K PACKAGE SIZE (uncompressed): 1140 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: jfsutils: jfsutils (IBM JFS utilities) jfsutils: jfsutils: Utilities for managing IBM's Journaled File System (JFS) under Linux: jfsutils: jfs_debugfs - shell-type JFS file system editor. jfsutils: jfs_fsck - check and repair a JFS formatted device. jfsutils: jfs_fscklog - extract a JFS fsck service log into a file. jfsutils: jfs_logdump - dump a JFS formatted device's journal log. jfsutils: jfs_mkfs - create a JFS formatted partition. jfsutils: jfs_tune - adjust tunable file system parameters on JFS. jfsutils: jfsutils: PACKAGE NAME: kbd-1.15.2-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 1072 K PACKAGE SIZE (uncompressed): 3410 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: kbd: kbd (keyboard maps and console fonts) kbd: kbd: Load and save keyboard mappings. Needed if you are not using the US kbd: keyboard map. This package also contains utilities to change your kbd: console fonts - if you install it you'll get a menu later on that lets kbd: you select from many different fonts. If you like one, you can make kbd: it your default font. A new default font can be chosen at any time by kbd: typing 'setconsolefont'. kbd: kbd: kbd: PACKAGE NAME: kernel-3.0.4-x86_64-1vl70.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 531 K PACKAGE SIZE (uncompressed): 3260 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: kernel: VectorLinux linux-3.0.4 kernel kernel: kernel: Built for Vectorlinux kernel: based on the config-2.6.19.2-VLsleep kernel: config by joe1962 kernel: kernel: kernel: kernel: kernel: kernel: Package Created By: Uelsk8s PACKAGE NAME: kernel-modules-3.0.4-x86_64-1vl70.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 15383 K PACKAGE SIZE (uncompressed): 78750 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: kernel-modules: VectorLinux linux-3.0.4 kernel modules kernel-modules: kernel-modules: These are Linux kernel modules (device drivers) kernel-modules: kernel-modules: config by joe1962 kernel-modules: kernel-modules: kernel-modules: kernel-modules: kernel-modules: kernel-modules: built by Uelsk8s for Vectorlinux PACKAGE NAME: less-436-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 109 K PACKAGE SIZE (uncompressed): 290 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: less: less (file pager) less: less: Less is a paginator similar to more (1), but which allows backward less: movement in the file as well as forward movement. Also, less does not less: have to read the entire input file before starting, so with large less: input files it starts up faster than text editors like vi (1). less: less: Less was written by Mark Nudelman. less: less: less: PACKAGE NAME: lha-114i-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 46 K PACKAGE SIZE (uncompressed): 130 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: lha: lha (LHa archive utility) lha: lha: LHa is an archiving and compressing utility written by Tsugio Okamoto. lha: lha: lha: lha: lha: lha: lha: lha: PACKAGE NAME: libcgroup-0.37.1-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 96 K PACKAGE SIZE (uncompressed): 370 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libcgroup: libcgroup (library and utilities for kernel control groups) libcgroup: libcgroup: Control Groups provide a mechanism for aggregating/partitioning sets of libcgroup: tasks, and all their future children, into hierarchical groups with libcgroup: specialized behaviour. It makes use of a filesystem interface. libcgroup: This package contains a library for developing applications that use libcgroup: control groups, as well as some basic userspace tools for controlling libcgroup: and monitoring control groups. libcgroup: libcgroup: Homepage: http://libcg.sourceforge.net/ libcgroup: PACKAGE NAME: lilo-22.8-x86_64-15.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 254 K PACKAGE SIZE (uncompressed): 890 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: lilo: lilo (Linux Loader) lilo: lilo: Generic Boot Loader for Linux ('LInux LOader') by Werner Almesberger. lilo: LILO boots Linux from your hard drive. It can also boot other lilo: operating systems such as MS-DOS and OS/2, and can even boot DOS from lilo: the second hard drive. LILO comes with utilities and documentation lilo: that make it easier to install, such as 'liloconfig' and 'QuickStart'. lilo: NOTE: Installing boot loaders is inherently dangerous. Be sure to have lilo: some means to boot your system from a different media if you install lilo: LILO on your hard disk. lilo: PACKAGE NAME: logrotate-3.7.8-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 36 K PACKAGE SIZE (uncompressed): 100 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: logrotate: logrotate (system log rotation tool) logrotate: logrotate: The logrotate utility is designed to simplify the administration logrotate: of log files on a system which generates a lot of log files. logrotate: Logrotate allows for the automatic rotation compression, removal logrotate: and mailing of log files. Logrotate can be set to handle a log logrotate: file daily, weekly, monthly or when the log file gets to a certain logrotate: size. Normally, logrotate runs as a daily cron job. logrotate: logrotate: logrotate: PACKAGE NAME: lvm2-2.02.84-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 1290 K PACKAGE SIZE (uncompressed): 8130 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: lvm2: lvm2 (Logical Volume Manager version 2) lvm2: lvm2: Heinz Mauelshagen's LVM (Logical Volume Manager) for Linux. lvm2: LVM adds an additional layer between the physical peripherals and the lvm2: low-level I/O interface to get a logical view of disks. This allows lvm2: the concatenation of several disks (so-called physical volumes or PVs) lvm2: to form a storage pool (so-called Volume Group or VG) with allocation lvm2: units called physical extents (called PE). With LVM, you can extend, lvm2: resize, or relocate storage dynamically. lvm2: lvm2: PACKAGE NAME: mingetty-1.08-x86_64-1vl70.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 15 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: mingetty: mingetty (small Linux console getty) mingetty: mingetty: Small Linux console getty that is started on the Linux text console, mingetty: asks for a login name and then tranfers over to /bin/login. mingetty: Is extended to allow automatic login and starting any app. mingetty: mingetty: mingetty: License: GPL mingetty: Authors: mingetty: Website: http://sourceforge.net/projects/mingetty PACKAGE NAME: module-init-tools-3.12-x86_64-2.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 389 K PACKAGE SIZE (uncompressed): 1250 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: module-init-tools: module-init-tools (kernel module utilities) module-init-tools: module-init-tools: Utilities to load and unload kernel modules. These are used on Linux module-init-tools: to load extra drivers or other features into the running kernel. module-init-tools: module-init-tools: module-init-tools: module-init-tools: module-init-tools: module-init-tools: module-init-tools: PACKAGE NAME: mt-st-0.9b-x86_64-2.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 29 K PACKAGE SIZE (uncompressed): 100 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: mt-st: mt-st (controls magnetic tape drive operation) mt-st: mt-st: This mt originates from BSD NET-2. Some Linux SCSI tape-specific mt-st: ioctls have been added to the original source and the man page has mt-st: been updated. Although this mt program is tailored for SCSI tape, it mt-st: can also be used with the QIC-02 driver and hopefully with other Linux mt-st: tape drivers using the same ioctls (some of the commands may not work mt-st: with all drivers). mt-st: mt-st: mt-st: PACKAGE NAME: mtx-1.3.12-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 63 K PACKAGE SIZE (uncompressed): 250 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: mtx: mtx (Controls tape autochangers) mtx: mtx: The MTX program controls the robotic mechanism in autoloaders and mtx: tape libraries such as the HP SureStore DAT 40x6, Exabyte EZ-17, and mtx: Exabyte 220. mtx: mtx: This program is also reported to work with a variety of other tape mtx: libraries and autochangers from Tandberg/Overland, Breece Hill, HP, mtx: Seagate, Dell and Quantum. mtx: mtx: PACKAGE NAME: ncompress-4.2.4.3-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 15 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: ncompress: ncompress (the classic *nix compression utility) ncompress: ncompress: Compress reduces the size of the named files using adaptive Lempel-Ziv ncompress: coding. Whenever possible, each file is replaced by one with the ncompress: extension .Z, while keeping the same ownership modes, access and ncompress: modification times. If no files are specified, the standard input is ncompress: compressed to the standard output. Compressed files can be restored ncompress: to their original form using uncompress or zcat. ncompress: ncompress: ncompress: PACKAGE NAME: ntfs-3g-2011.1.15-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 276 K PACKAGE SIZE (uncompressed): 920 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: ntfs-3g: ntfs-3g (NTFS read-write filesystem driver) ntfs-3g: ntfs-3g: The NTFS-3G driver is an open source, freely available NTFS driver ntfs-3g: for Linux with read and write support. It provides safe and fast ntfs-3g: handling of the Windows XP, Windows Server 2003, Windows 2000 and ntfs-3g: Windows Vista file systems. Most POSIX file system operations are ntfs-3g: supported, with the exception of full file ownership and access ntfs-3g: rights support. ntfs-3g: ntfs-3g: Homepage for the ntfs-3g project: http://www.ntfs-3g.org ntfs-3g: PACKAGE NAME: openssl-solibs-0.9.8r-x86_64-2.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 720 K PACKAGE SIZE (uncompressed): 2480 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: openssl-solibs: openssl-solibs (OpenSSL shared libraries) openssl-solibs: openssl-solibs: These shared libraries provide encryption routines required by openssl-solibs: programs such as openssh. They are also used by KDE's Konqueror web openssl-solibs: browser to provide secure web connections. openssl-solibs: openssl-solibs: This product includes software developed by the OpenSSL Project for openssl-solibs: use in the OpenSSL Toolkit (http://www.openssl.org). This product openssl-solibs: includes cryptographic software written by Eric Young openssl-solibs: (eay@cryptsoft.com). This product includes software written by Tim openssl-solibs: Hudson (tjh@cryptsoft.com). PACKAGE NAME: os-prober-1.29-noarch-3vl70.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 8 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: bash >= 3.1.017 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: os-prober: os-prober ( Scans system for present OSs ) os-prober: os-prober: Utility borrowed from debian to scan the system for present os-prober: Operating Systems. This version has been patched to recognize os-prober: VectorLinux installations and identify them properly. os-prober: os-prober: Patched by : M0E-lnx os-prober: WEBSITE: http://packages.debian.org/sid/i386/os-prober-udeb/download os-prober: LICENSE: GNU GPL PACKAGE NAME: patch-2.6.1-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 89 K PACKAGE SIZE (uncompressed): 230 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: patch: patch (apply a diff file to an original file or files) patch: patch: Patch is a utility used to apply diffs (or patches) to files, which patch: are usually source code. patch: patch: Larry Wall wrote the original version of patch. Paul Eggert removed patch: patch's arbitrary limits; added support for binary files, setting patch: file times, and deleting files; and made it conform better to POSIX. patch: Other contributors include Wayne Davison, who added unidiff support, patch: and David MacKenzie, who added configuration and backup support. patch: PACKAGE NAME: pciutils-3.1.7-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 241 K PACKAGE SIZE (uncompressed): 1090 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pciutils: pciutils (PCI utilities) pciutils: pciutils: lspci displays detailed information about all PCI buses and devices pciutils: in the system, replacing the original /proc/pci interface. pciutils: pciutils: setpci allows reading from and writing to PCI device configuration pciutils: registers. For example, you can adjust the latency timers with it. pciutils: pciutils: See the manual pages for more details. pciutils: pciutils: PACKAGE NAME: pcmciautils-017-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 31 K PACKAGE SIZE (uncompressed): 120 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pcmciautils: pcmciautils (Utilities for using PCMCIA cards with 2.6+ kernels) pcmciautils: pcmciautils: This package provides PCMCIA tools that replace the pcmcia-cs tools pcmciautils: used with the 2.4.x Linux kernel. PCMCIA cards are commonly used pcmciautils: in laptops to provide expanded capabilities such as network pcmciautils: connections, modems, increased memory, and more. pcmciautils: pcmciautils: pcmciautils: pcmciautils: pcmciautils: PACKAGE NAME: pkgtools-tukaani-1.2.5-x86_64-1.tgz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 326 K PACKAGE SIZE (uncompressed): 950 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pkgtools-tukaani: pkgtools (Tukaani's Slackware compatible package maintenance system) pkgtools-tukaani: pkgtools-tukaani: pkgtools contains various utilities for managing Tukaani and pkgtools-tukaani: Slackware packages, such as 'installpkg', 'removepkg', upgradepkg', pkgtools-tukaani: 'makepkg', 'viewpkg' and 'explodepkg'. Also included are 'pkgtool', pkgtools-tukaani: which is a powerful menu-based program for managing packages, pkgtools-tukaani: 'makerepo' for creating package repositories for pkgtool, 'config-xwm' pkgtools-tukaani: for selecting X11 window manager, and a few other scripts. This pkgtools-tukaani: package includes 'dialog' and 'tar-1.13-pkgtools' binaries. pkgtools-tukaani: pkgtools-tukaani: http://tukaani.org/pkgtools/ PACKAGE NAME: pm-utils-1.4.1-x86_64-2.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 67 K PACKAGE SIZE (uncompressed): 300 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pm-utils: pm-utils (Power Management Utilities) pm-utils: pm-utils: The pm-utils package provides simple shell command line tools to pm-utils: suspend and hibernate computers that can be used to run vendor or pm-utils: distribution supplied scripts on suspend and resume. pm-utils: pm-utils: Homepage: http://pm-utils.freedesktop.org/ pm-utils: pm-utils: pm-utils: pm-utils: PACKAGE NAME: procps-3.2.8-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 226 K PACKAGE SIZE (uncompressed): 660 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: procps: procps (utilities for displaying process information) procps: procps: The procps package provides the classic set of utilities used to procps: display information about the processes currently running on the procps: machine. procps: procps: procps: procps: procps: procps: PACKAGE NAME: quota-3.17-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 163 K PACKAGE SIZE (uncompressed): 930 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: quota: quota (Linux disk quota utilities) quota: quota: An implementation of the diskquota system for the Linux operating quota: system to keep those greedy users from gobbling up 100% of the hard quota: drive space. Works with ext2, ext3, reiserfs, and xfs filesystems. quota: This system is based on the Melbourne quota system by Robert Elz. quota: Edvard Tuinder and Marco van Wieringen ported this code to Linux. quota: Jan Kara added support for the new Linux quota format and the XFS quota: filesystem. quota: quota: PACKAGE NAME: reiserfsprogs-3.6.21-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 219 K PACKAGE SIZE (uncompressed): 1050 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: reiserfsprogs: reiserfsprogs (Reiserfs filesystem utilities) reiserfsprogs: reiserfsprogs: These utilities are used for Reiserfs. Reiserfs is a file system reiserfsprogs: based on balanced tree algorithms. Learn more at the home site: reiserfsprogs: http://www.namesys.com reiserfsprogs: reiserfsprogs: Reiserfs is the work of Hans Reiser and many others. See the file reiserfsprogs: /usr/doc/reiserfs*/README for full credits. reiserfsprogs: reiserfsprogs: reiserfsprogs: PACKAGE NAME: rpm2tgz-1.2.2-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 5 K PACKAGE SIZE (uncompressed): 30 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: rpm2tgz: rpm2tgz (a tool for converting an RPM archive into a tar+gz one) rpm2tgz: rpm2tgz: Converts RPM format to Slackware's GNU tar + GNU zip format. (view rpm2tgz: converted packages with "less", install and remove with "installpkg", rpm2tgz: "removepkg", "pkgtool", or manually with "tar"). rpm2tgz: rpm2tgz: Converted packages come with no warranty. ;-) rpm2tgz: rpm2tgz: rpm2tgz: rpm2tgz: PACKAGE NAME: sdparm-1.06-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 93 K PACKAGE SIZE (uncompressed): 290 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: sdparm: sdparm (fetch and change SCSI attributes) sdparm: sdparm: sdparm is a utility for listing and potentially changing SCSI disk sdparm: parameters. More generally it can be used on any device that uses sdparm: a SCSI command set. Apart from SCSI disks, examples of devices that sdparm: use SCSI command sets are ATAPI CD/DVD drives, SCSI and ATAPI tape sdparm: drives and SCSI enclosures. sdparm: sdparm: sdparm was written by Douglas Gilbert. sdparm: sdparm: PACKAGE NAME: sed-4.2.1-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 169 K PACKAGE SIZE (uncompressed): 630 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: sed: sed (stream editor) sed: sed: This is the GNU version of sed, a stream editor. A stream editor is sed: used to perform basic text transformations on an input stream (a file sed: or input from a pipeline). It is sed's ability to filter text in a sed: pipeline which distinguishes it from other types of editors. sed: sed: sed is a required package (it is needed by many system scripts). sed: sed: sed: PACKAGE NAME: shadow-4.1.4.2-x86_64-3.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 1168 K PACKAGE SIZE (uncompressed): 4130 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: shadow: shadow (shadow password suite) shadow: shadow: This set of login related programs utilizes an alternate, non-readable shadow: file to contain the actual encrypted passwords. This is presumed to shadow: increase system security by increasing the difficulty with which shadow: system crackers obtain encrypted passwords. It was written by shadow: Julianne Frances Haugh and the Linux port is maintained by Tomasz shadow: Kloczko. shadow: shadow: This package provides 'login', which is needed to log into the system. shadow: PACKAGE NAME: sharutils-4.11-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 151 K PACKAGE SIZE (uncompressed): 680 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: sharutils: sharutils (GNU shell archive packing utilities) sharutils: sharutils: `shar' makes so-called shell archives out of many files, preparing sharutils: them for transmission by electronic mail services. `unshar' helps sharutils: unpacking shell archives after reception. `uuencode' prepares a file sharutils: for transmission over an electronic channel which ignores or otherwise sharutils: mangles the eight bit (high order bit) of bytes. `uudecode' does the sharutils: converse transformation. `remsync' allows for remote synchronization sharutils: of directory trees using electronic mail. sharutils: sharutils: PACKAGE NAME: slapt-get-0.10.2h-x86_64-1vl60.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 165 K PACKAGE SIZE (uncompressed): 1000 K PACKAGE REQUIRED: aaa_elflibs-13.0-x86_64-2-upgraded >= 2011-02-12,03 | curl >= 7.19.6-x86_64-1,aaa_elflibs-13.0-x86_64-2-upgraded >= 2011-02-12,03 | libidn >= 1.5-x86_64-1,aaa_elflibs-13.0-x86_64-2-upgraded >= 2011-02-12,03 | openldap-client >= 2.3.43-x86_64-1,aaa_elflibs-13.0-x86_64-2-upgraded >= 2011-02-12,03 | zlib >= 1.2.3-x86_64-2,cyrus-sasl >= 2.1.23-x86_64-1,glibc-solibs >= 2.9-x86_64-4vl70,gpgme >= 1.1.8-x86_64-1,libgpg-error >= 1.7-x86_64-1,openssl >= 0.9.8k-x86_64-2 | openssl-solibs >= 0.9.8k-x86_64-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: slapt-get: Slapt-Get (Slackware APT Like System) slapt-get: slapt-get: Slapt-Get is an APT like system for Slackware package management slapt-get: It allows one to search Slackware mirrors and third party sources slapt-get: for packages, compare them with installed packages, install new slapt-get: packages, or upgrade all installed packages. slapt-get is great for slapt-get: scripting as well. slapt-get: slapt-get: slapt-get: slapt-get: PACKAGE NAME: slocate-3.1-x86_64-3.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 27 K PACKAGE SIZE (uncompressed): 90 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: slocate: slocate (Secure Locate) slocate: slocate: Slocate is an enhanced version of locate, a command to help you locate slocate: files on the system. Like the original version of locate, Slocate slocate: maintains a database of files on the system, updating it nightly. slocate: Unlike the original, Slocate indexes every file on the machine rather slocate: than only the ones that can be seen by everyone. The "secure" part of slocate: slocate is that it will only return matches if the user is allowed to slocate: see the files. slocate: slocate: PACKAGE NAME: smartmontools-5.40-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 280 K PACKAGE SIZE (uncompressed): 980 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: smartmontools: smartmontools (hard drive monitoring utilities) smartmontools: smartmontools: SMARTMONTOOLS contains utilities that control and monitor storage smartmontools: devices using the Self-Monitoring, Analysis and Reporting Technology smartmontools: (S.M.A.R.T.) system build into ATA and SCSI Hard Drives. This is used smartmontools: to check the reliability of the hard drive and to predict drive smartmontools: failures. SMARTMONTOOLS Version 5.x is designed to comply to the smartmontools: ATA/ATAPI-5 specification (Revision 1). Future releases of smartmontools: SMARTMONTOOLS (Versions 6.x and 7.x) will comply with the ATA/ATAPI-6 smartmontools: and ATA/ATAPI-7 specifications. smartmontools: PACKAGE NAME: splitvt-1.6.5-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 28 K PACKAGE SIZE (uncompressed): 80 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: splitvt: splitvt (run multiple shells in a single window) splitvt: splitvt: This program splits the screen into two windows, one above the other, splitvt: and runs a shell in each one. splitvt: splitvt: Splitvt was written by Sam Lantinga. splitvt: splitvt: splitvt: splitvt: splitvt: PACKAGE NAME: sysfsutils-2.1.0-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 38 K PACKAGE SIZE (uncompressed): 190 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: sysfsutils: sysfsutils (Utilities for the sysfs filesystem) sysfsutils: sysfsutils: The purpose of this package is to provide a set of utilities for sysfsutils: interfacing with sysfs, a virtual filesystem in Linux kernel versions sysfsutils: 2.6+ that provides a tree of system devices. While a filesystem is a sysfsutils: very useful interface, a library (libsysfs) is also included that sysfsutils: will hopefully make it easier for applications to query system sysfsutils: devices and their attributes. sysfsutils: sysfsutils: sysfsutils: PACKAGE NAME: sysklogd-1.5-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 60 K PACKAGE SIZE (uncompressed): 160 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: sysklogd: sysklogd (Linux system logging utilities) sysklogd: sysklogd: Dr. Greg Wettstein and Stephen Tweedie's syslogd/klogd. sysklogd: sysklogd: This package contains a modified version of syslogd for the Linux sysklogd: environment. An additional utility, klogd, is included which allows sysklogd: kernel logging to be directed through the syslogd facility. sysklogd: Syslogd and klogd are started when your system boots. sysklogd: sysklogd: sysklogd: PACKAGE NAME: syslinux-3.84-x86_64-2.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 440 K PACKAGE SIZE (uncompressed): 1540 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: syslinux: syslinux (SYSLINUX/PXELINUX/ISOLINUX boot loaders) syslinux: syslinux: SYSLINUX is a boot loader for the Linux operating system which syslinux: operates off an MS-DOS/Windows FAT filesystem. This is used by the syslinux: Slackware makebootdisk script to create system boot floppies. syslinux: syslinux: Also included are PXELINUX and ISOLINUX, boot loaders for booting from syslinux: a network server or CD-ROM. syslinux: syslinux: SYSLINUX, PXELINUX, and ISOLINUX were written by H. Peter Anvin. syslinux: PACKAGE NAME: sysvinit-2.86-x86_64-6.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 59 K PACKAGE SIZE (uncompressed): 180 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: sysvinit: sysvinit (init, the parent of all processes) sysvinit: sysvinit: System V style init programs by Miquel van Smoorenburg that control sysvinit: the booting and shutdown of your system. These support a number of sysvinit: system runlevels, each with a specific set of utilities spawned. sysvinit: For example, the normal system runlevel is 3, which starts agetty sysvinit: on virtual consoles tty1 - tty6. Runlevel 4 starts xdm. sysvinit: Runlevel 0 shuts the system down. sysvinit: sysvinit: sysvinit: PACKAGE NAME: sysvinit-functions-8.53-x86_64-2.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 29 K PACKAGE SIZE (uncompressed): 120 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: sysvinit-functions: sysvinit-functions (/etc/init.d/functions) sysvinit-functions: sysvinit-functions: This is the /etc/init.d/functions file, the typical sysvinit-style sysvinit-functions: directories, and a few supporting binaries. Using this system, sysvinit-functions: subdirectories of /etc/rc.d/ are searched for scripts (which are sysvinit-functions: usually symlinks to the script in /etc/init.d/ or /etc/rc.d/init.d/). sysvinit-functions: The links must start with S to start a script or K to stop (kill) it. sysvinit-functions: sysvinit-functions: For the most part, these are useful for running software developed sysvinit-functions: for other versions of Linux. sysvinit-functions: PACKAGE NAME: tar-1.25-x86_64-1.tgz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 1041 K PACKAGE SIZE (uncompressed): 2510 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: tar: tar (archiving utility) tar: tar: This is the GNU version of tar, an archiving program designed to store tar: and extract files from an archive file known as a tarfile. A tarfile tar: may be made on a tape drive, however, it is also common to write a tar: tarfile to a normal file. tar: tar: Slackware's package system uses tarfiles compressed with GNU gzip. tar: tar: tar: PACKAGE NAME: time-1.7-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 17 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: time: time (the GNU time command for measuring program resource use) time: time: The `time' command runs another program, then displays information time: about the resources used by that program, collected by the system time: while the program was running. time: time: GNU time was originally written by David Keppel, with later versions time: worked on by David MacKenzie, Arne Henrik Juul, and Francois Pinard. time: time: time: PACKAGE NAME: tree-1.5.3-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 28 K PACKAGE SIZE (uncompressed): 90 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: tree: tree (a program to display a directory tree) tree: tree: Tree is a recursive directory listing program that produces a depth tree: indented listing of files, which is colorized ala dircolors if the tree: LS_COLORS environment variable is set and output is to tty. With no tree: arguments, tree lists the files in the current directory. tree: tree: The tree utility was written by Steve Baker. tree: tree: tree: PACKAGE NAME: udev-165-x86_64-2.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 298 K PACKAGE SIZE (uncompressed): 1720 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: udev: udev (dynamic device directory system) udev: udev: udev provides a dynamic device directory containing only the files udev: for the devices which are actually present. It creates or removes udev: device node files usually located in the /dev directory. udev: udev: udev requires a 2.6 or newer kernel. udev: udev: Kay Sievers is the udev maintainer. udev: udev: PACKAGE NAME: unarj-265-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 16 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: unarj: unarj (a command-line utility for decompressing .arj archives) unarj: unarj: This is a simple command-line tool for decompressing .arj files. unarj: Thanks to Haruhiko Okumura and ARJ Software, Inc. for providing this unarj: source code free of charge. unarj: unarj: UNARJ software and manual copyright (c) 1990-2002 ARJ Software, Inc. unarj: All rights reserved. unarj: unarj: unarj: PACKAGE NAME: usb_modeswitch-1.1.6-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 52 K PACKAGE SIZE (uncompressed): 320 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: usb_modeswitch: usb_modeswitch (mode switching tool for multiple mode USB devices) usb_modeswitch: usb_modeswitch: USB-ModeSwitch is (surprise!) a small mode switching tool for usb_modeswitch: controlling "flip flop" (multiple device) USB gear. These devices usb_modeswitch: initially appear to be USB storage, typically containing the MS usb_modeswitch: Windows drivers for whatever the real purpose of the device is, such usb_modeswitch: as a wireless USB modem. To use these devices with Linux, they need usb_modeswitch: to be told to switch out of storage mode, which is the purpose of the usb_modeswitch: USB-ModeSwitch utility. usb_modeswitch: usb_modeswitch: Homepage: http://www.draisberghof.de/usb_modeswitch PACKAGE NAME: usbutils-002-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 180 K PACKAGE SIZE (uncompressed): 630 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: usbutils: usbutils (USB utilities) usbutils: usbutils: lsusb displays detailed information about all USB buses and devices usbutils: in the system. usbutils: usbutils: usbmodules lists the kernel modules for a plugged in USB device. usbutils: usbutils: See the manual pages for more details. usbutils: usbutils: usbutils: PACKAGE NAME: utempter-1.1.5-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 13 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: utempter: utempter (utmp updating library and utility) utempter: utempter: The utempter package provides a utility and shared library that utempter: allows terminal applications such as xterm and screen to update utempter: /var/run/utmp and /var/log/wtmp without requiring root privileges. utempter: utempter: utempter: utempter: utempter: utempter: PACKAGE NAME: util-linux-2.19-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 1457 K PACKAGE SIZE (uncompressed): 6840 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: util-linux: util-linux (a huge collection of essential utilities) util-linux: util-linux: The util-linux package is a huge collection of random utilities util-linux: that are essential to run a Linux system. util-linux: util-linux: http://kernel.org/~kzak/util-linux/ util-linux: util-linux: util-linux: util-linux: util-linux: PACKAGE NAME: vasm-7.0-noarch-1VL70.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 350 K PACKAGE SIZE (uncompressed): 1490 K PACKAGE REQUIRED: nmap >= 3.93,expect >= 5.43,bash >= 3.0,tclx >= 8.3,tcl >= 8.4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: vasm: vasm2 (VLocity Linux Configurators) vasm: vasm: VASM Reloaded. vasm: vasm: Author: VLocity Linux vasm: License: GNU GPL vasm: PACKAGE NAME: vlart-6.0-noarch-1vl60.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 288 K PACKAGE SIZE (uncompressed): 320 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: vlart: VLART (Standard wallpapers and logos) vlart: vlart: Backgrounds and Logo of Vector Linux. vlart: vlart: Author: Vector Linux team vlart: PACKAGE NAME: vlconfig2-7.0-noarch-2VL70.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 4496 K PACKAGE SIZE (uncompressed): 12030 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: PACKAGE NAME: vlinit-6.0-noarch-4VL70.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 58 K PACKAGE SIZE (uncompressed): 320 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: vlinit: VLocityLinux init files vlinit: vlinit: packaged By Uelsk8s for VLocityLinux PACKAGE NAME: which-2.20-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 28 K PACKAGE SIZE (uncompressed): 90 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: which: which (shows the full path to shell commands) which: which: GNU 'which' takes one or more arguments. For each of its arguments it which: prints to stdout the full path of the executables that would have been which: executed when this argument had been entered at the shell prompt. It which: does this by searching for an executable or script in the directories which: listed in the environment variable PATH using the same algorithm as which: bash(1). 'Which' is a built-in function in many shells. which: which: The GNU version of which was written by Carlo Wood. which: PACKAGE NAME: xdelta-1.1.4-x86_64-1vl70.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 93 K PACKAGE SIZE (uncompressed): 490 K PACKAGE REQUIRED: glib >= 1.2.10,glibc-solibs >= 2.13,zlib >= 1.2.5 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xdelta: xdelta (A binary delta generator and an RCS replacement library) xdelta: xdelta: Xdelta provides the ability to generate deltas between a pair of xdelta: files and later apply those deltas. It operates similar to the diff xdelta: and patch commands, but works on binary files and does not produce a xdelta: human readable output. xdelta: xdelta: License: GPL xdelta: Authors: xdelta: Website: http://xdelta.googlecode.com/ PACKAGE NAME: xfsprogs-3.1.3-x86_64-1.txz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 702 K PACKAGE SIZE (uncompressed): 3600 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xfsprogs: xfsprogs (tools to use the XFS filesystem) xfsprogs: xfsprogs: XFS is a high performance journaling filesystem which originated xfsprogs: on the SGI IRIX platform. It is completely multi-threaded, can xfsprogs: support large files and large filesystems, extended attributes, xfsprogs: variable block sizes, is extent based, and makes extensive use of xfsprogs: Btrees (directories, extents, free space) to aid both performance xfsprogs: and scalability. xfsprogs: xfsprogs: xfsprogs: PACKAGE NAME: xz-5.0.0-x86_64-1.tgz PACKAGE LOCATION: ./a PACKAGE SIZE (compressed): 290 K PACKAGE SIZE (uncompressed): 900 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xz: xz (compression utility based on the LZMA algorithm) xz: xz: LZMA is a general purporse compression algorithm designed by Igor xz: Pavlov as part of 7-Zip. It provides high compression ratio while xz: keeping the decompression speed fast. XZ Utils are an attempt to make xz: LZMA compression easy to use on free (as in freedom) operating xz: systems. xz: xz: The people most responsible for xz are Igor Pavlov, Ville Koskinen, xz: and Lasse Collin. For more info: http://tukaani.org/xz/ xz: PACKAGE NAME: a2ps-4.14-x86_64-5.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 731 K PACKAGE SIZE (uncompressed): 4560 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: a2ps: a2ps (any to PostScript filter) a2ps: a2ps: GNU a2ps is an Any to PostScript filter. Of course it processes a2ps: plain text files, but also pretty prints quite a few popular a2ps: programming languages. Also contained in this package is psutils, a a2ps: collection of programs for manipulating PostScript files. a2ps: a2ps: a2ps is used by Apsfilter, so be sure to install this package if you a2ps: plan to do any printing. a2ps: a2ps: PACKAGE NAME: acct-6.5.4-x86_64-1.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 90 K PACKAGE SIZE (uncompressed): 300 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: acct: acct (process accounting utilities) acct: acct: This is a set of utilities which reports and summarizes data about acct: user connect times and process execution statistics. To activate acct: process accounting, create the log file (touch /var/log/pacct), and acct: then use the accton command to start it (accton /var/log/pacct). acct: Be aware that the log file can grow to be quite large. acct: acct: The GNU process accounting utilities were written by Noel Cragg and acct: the software is currently maintained by Ciaran O'Riordan, acct: Manuel A. Fernandez Montecelo, and Tim Schmielau. PACKAGE NAME: alsa-utils-1.0.24.2-x86_64-1.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 945 K PACKAGE SIZE (uncompressed): 1980 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: alsa-utils: alsa-utils (Advanced Linux Sound Architecture utilities) alsa-utils: alsa-utils: The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI alsa-utils: functionality to the Linux operating system. This package contains alsa-utils: command line audio utilities for use with ALSA: alsa-utils: alsactl (manage soundcard settings) alsa-utils: arecord/aplay (capture and play audio) alsa-utils: amixer (adjust mixer settings from the command line) alsa-utils: alsamixer (an ncurses-based console mixer) alsa-utils: alsa-utils: For more information, see http://alsa-project.org PACKAGE NAME: at-3.1.12-x86_64-1.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 40 K PACKAGE SIZE (uncompressed): 130 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: at: at (delayed command execution) at: at: at and batch read shell commands from standard input (or a specified at: file) storing them as a job to be scheduled for execution at a later at: time. at: at: The 'at' command was written by David Parsons and Thomas Koenig. at: at: at: at: PACKAGE NAME: bc-1.06.95-x86_64-2.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 99 K PACKAGE SIZE (uncompressed): 270 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: bc: bc (An arbitrary precision calculator language) bc: bc: bc is an arbitrary precision numeric processing language. Syntax is bc: similar to C, but differs in many substantial areas. It supports bc: interactive execution of statements. bc is a utility included in the bc: POSIX P1003.2/D11 draft standard. bc: bc: The GNU version of bc was written by Philip A. Nelson. bc: bc: bc: PACKAGE NAME: bootsplash-3.2.9-x86_64-1vl70.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 70 K PACKAGE SIZE (uncompressed): 390 K PACKAGE REQUIRED: freetype >= 2.4.4,glibc-solibs >= 2.13,lcms >= 1.19,libjpeg >= 8a | libjpeg >= v8a,libmng >= 1.0.10,zlib >= 1.2.5 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: bootsplash: bootsplash (graphical boot process for the linux kernel) bootsplash: bootsplash: Linux graphical bootsplash allows you to use custom graphics during bootsplash: early system startup. It makes it possible to place a nice graphic bootsplash: behind or above the kernel boot messages. It hooks into the fbcon bootsplash: layer and, if activated, searches the initial ramdisk for a JPEG bootsplash: picture to show. On any output operations to the console, it takes bootsplash: care of painting a margin around your text and a background picture bootsplash: behind the text with a set of special cfb functions. bootsplash: bootsplash: PACKAGE NAME: cdparanoia-III_10.2-x86_64-1.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 95 K PACKAGE SIZE (uncompressed): 410 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: cdparanoia: cdparanoia (digital audio extraction tool) cdparanoia: cdparanoia: cdparanoia is a Compact Disc Digital Audio (CDDA) extraction tool, cdparanoia: commonly known on the net as a 'ripper'. It reads digital audio data cdparanoia: from a Compact Disc and saves it to sound files. cdparanoia has been cdparanoia: designed to read correct audio data even using cheap CD-ROM drives cdparanoia: prone to misalignment, frame jitter and loss of streaming. cdparanoia: cdparanoia will also read and repair data from CDs that have been cdparanoia: damaged in some way. cdparanoia: cdparanoia: PACKAGE NAME: cdrdao-1.2.3-x86_64-1.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 281 K PACKAGE SIZE (uncompressed): 1250 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: cdrdao: cdrdao (CD burning utility) cdrdao: cdrdao: cdrdao burns proper disc-at-once (DAO) audio discs. In DAO mode the cdrdao: disc is written in one shot, so you don't have to have irritating 2 cdrdao: second gaps interrupting a live recording. cdrdao: cdrdao: cdrdao: cdrdao: cdrdao: cdrdao: PACKAGE NAME: cdrkit-1.1.10-x86_64-1vl70.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 742 K PACKAGE SIZE (uncompressed): 3230 K PACKAGE REQUIRED: libcap >= 2.10,perl >= 5.10.0,zlib >= 1.2.3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: cdrkit: cdrkit (Tools for mastering and writing compact discs) cdrkit: cdrkit: cdrkit is a collection of CD/DVD utilities. cdrkit: cdrkit: icedax -- CD audio sampling utility. cdrkit: wodim -- burn discs in most ATAPI and SCSI CD-R drives. cdrkit: genisoimage -- create ISO9660/HFS/Joliet CD-ROM images. cdrkit: cdrkit: http://cdrkit.org cdrkit: cdrkit: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: diffstat-1.53-x86_64-1.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 21 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: diffstat: diffstat (produces statistics from diff output) diffstat: diffstat: DiffStat is a simple filter that reads the output of the 'diff' diffstat: program and displays a histogram of insertions, deletions, and diffstat: modifications per-file. It is useful for reviewing large, complex diffstat: patch files. diffstat: diffstat: Thomas E. Dickey is the author of DiffStat. diffstat: diffstat: diffstat: PACKAGE NAME: diffutils-3.0-x86_64-1.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 306 K PACKAGE SIZE (uncompressed): 1250 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: diffutils: diffutils (finds differences between files) diffutils: diffutils: The GNU diff utilities finds differences between files. A major use diffutils: for this package is to make source code patches. diffutils: diffutils: diffutils: diffutils: diffutils: diffutils: diffutils: PACKAGE NAME: dmapi-2.2.10-x86_64-1.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 30 K PACKAGE SIZE (uncompressed): 160 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: dmapi: dmapi (Data Management API library) dmapi: dmapi: A library required to use the Data Management API (DMAPI). dmapi: This interface is defined in the X/Open document 'Systems Management: dmapi: Data Storage Managment (XDSM) API' dated February 1997. dmapi: dmapi: The DMAPI library is used by the xfsdump utility. dmapi: dmapi: dmapi: dmapi: PACKAGE NAME: dvd+rw-tools-7.1-x86_64-1.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 102 K PACKAGE SIZE (uncompressed): 360 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: dvd+rw-tools: dvd+rw-tools (DVD+-RW tools) dvd+rw-tools: dvd+rw-tools: A collection of tools to master DVD+RW/+R/-R/-RW media. For further dvd+rw-tools: information see http://fy.chalmers.se/~appro/linux/DVD+RW/. dvd+rw-tools: dvd+rw-tools: The DVD+RW tools were written by Andy Polyakov. dvd+rw-tools: dvd+rw-tools: dvd+rw-tools: dvd+rw-tools: dvd+rw-tools: PACKAGE NAME: elinks-0.11.7-x86_64-1vl70.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 775 K PACKAGE SIZE (uncompressed): 2860 K PACKAGE REQUIRED: bzip2 >= 1.0.6,expat >= 2.0.1,glibc-solibs >= 2.13,gmp >= 5.0.1,gpm >= 1.20.1,guile >= 1.8.8,less >= 436,libX11 >= 1.4.2,libXau >= 1.0.6,libXdmcp >= 1.1.0,libidn >= 1.19,libtool >= 2.4,libxcb >= 1.7,openssl >= 0.9.8r | openssl-solibs >= 0.9.8r,util-linux >= 2.19,zlib >= 1.2.5 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: elinks: elinks (ELinks - Full-Featured Text WWW Browser) elinks: ELinks is an advanced and well-established feature-rich text mode elinks: web (HTTP/FTP/..) browser. ELinks can render both frames and tables, elinks: is highly customizable, and can be extended via Lua or Guile scripts. elinks: It is very portable and runs on a variety of platforms. elinks: elinks: elinks: elinks: License: GPL elinks: Authors: http://elinks.or.cz elinks: Website: http://elinks.or.cz PACKAGE NAME: enscript-1.6.5.2-x86_64-1.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 361 K PACKAGE SIZE (uncompressed): 2180 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: enscript: enscript (converts text files to PostScript and other formats) enscript: enscript: Enscript converts text files to PostScript and spools the generated enscript: output to a printer or saves it to a file. If no input files are enscript: given, enscript processes standard input. Enscript can be extended to enscript: handle different output media and it has many options for customizing enscript: printouts. enscript: enscript: enscript: enscript: PACKAGE NAME: flac-1.2.1-x86_64-3.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 782 K PACKAGE SIZE (uncompressed): 3250 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: flac: flac (Free Lossless Audio Codec) flac: flac: FLAC stands for Free Lossless Audio Codec. Grossly oversimplified, flac: FLAC is similar to MP3, but lossless. "Free" means that the flac: specification of the stream format is in the public domain, and that flac: neither the FLAC format nor any of the implemented encoding/decoding flac: methods are covered by any patent. It also means that the sources for flac: libFLAC and libFLAC++ are available under the LGPL and the sources for flac: flac, metaflac, and the plugins are available under the GPL. flac: flac: FLAC was developed by Josh Coalson. PACKAGE NAME: foomatic-filters-4.0.6-x86_64-1.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 76 K PACKAGE SIZE (uncompressed): 240 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: foomatic-filters: foomatic-filters (Universal print filter/RIP wrapper) foomatic-filters: foomatic-filters: foomatic-rip is a universal print filter, which is used by CUPS with foomatic-filters: the gutenprint and hplip printer drivers. It translates PostScript foomatic-filters: (and also other file formats) to the printer's native language, foomatic-filters: usually using Ghostscript (gs) as the external renderer. The way foomatic-filters: this translation is done is described in a PPD file. foomatic-filters: foomatic-filters: For more information on foomatic, see: http://linuxprinting.org foomatic-filters: foomatic-filters: PACKAGE NAME: gambas2-runtime-2.22.0-x86_64-2vl70.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 1662 K PACKAGE SIZE (uncompressed): 5230 K PACKAGE REQUIRED: SDL >= 1.2.14,atk >= 1.32.0,bzip2 >= 1.0.6,cairo >= 1.10.2,curl >= 7.20.1,cxxlibs >= 6.0.14 | gcc-g++ >= 4.5.2,cyrus-sasl >= 2.1.23,directfb >= 1.4.3,expat >= 2.0.1,fontconfig >= 2.8.0,freetype >= 2.4.4,gcc >= 4.5.2,gdk-pixbuf2 >= 2.22.1,glib2 >= 2.28.3,glibc-solibs >= 2.13,gtk+2 >= 2.24.3,lcms >= 1.19,libICE >= 1.0.7,libSM >= 1.2.0,libX11 >= 1.4.2,libXau >= 1.0.6,libXcomposite >= 0.4.3,libXcursor >= 1.1.11,libXdamage >= 1.1.3,libXdmcp >= 1.1.0,libXext >= 1.2.0,libXfixes >= 5.0,libXft >= 2.2.0,libXi >= 1.4.1,libXinerama >= 1.1.1,libXmu >= 1.1.0,libXrandr >= 1.3.1,libXrender >= 0.9.6,libXt >= 1.1.1,libXtst >= 1.2.0,libXxf86vm >= 1.1.1,libdrm >= 2.4.23,libffi >= 3.0.9,libidn >= 1.19,libjpeg >= 8a,libmng >= 1.0.10,libpng >= 1.4.5,librsvg >= 2.32.0,libtiff >= 3.9.4,libxcb >= 1.7,libxml2 >= 2.7.8,libxslt >= 1.1.26,mesa >= 7.9.2,openldap-client >= 2.4.23,openssl >= 0.9.8r | openssl-solibs >= 0.9.8r,pango >= 1.28.3,pcre >= 8.02,pixman >= 0.20.2,poppler >= 0.16.2,qt3 >= 3.3.8b,sqlite >= 3.7.3,svgalib >= 1.9.25,util-linux >= 2.19,zlib >= 1.2.5 PACKAGE CONFLICTS: PACKAGE SUGGESTS: mysql >= 5.0.24a-i486-1,sqlite >= 2.8.17-i586-4vl58,sqlite3 >= 3.4.1-i586-1vl58,postgresql >= 8.2.4-i586-1vl58,unixODBC >= 2.2.11-i586-4vl58,kdelibs >= 3.5.6-i586-2vl58 PACKAGE DESCRIPTION: gambas2-runtime: Gambas 2 Runtime gambas2-runtime: gambas2-runtime: This package provides the runtime environment for gambas2-runtime: Gambas 2, so that you can execute Gambas 2 apps gambas2-runtime: without needing to have the IDE installed. gambas2-runtime: gambas2-runtime: Website: http://gambas.sourceforge.net gambas2-runtime: License: GNU General Public License, version 2 PACKAGE NAME: ghostscript-9.00-x86_64-2.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 11859 K PACKAGE SIZE (uncompressed): 50600 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: ghostscript: ghostscript (GPL Ghostscript) ghostscript: ghostscript: GPL Ghostscript is an interpreter of Adobe Systems' PostScript(tm) ghostscript: and Portable Document Format (PDF) languages. Ghostscript is an ghostscript: essential part of the printing subsystem, taking PostScript output ghostscript: from applications and converting it into an appropriate printer or ghostscript: display format. Ghostscript supports many printers directly, and ghostscript: more are supported through add-on packages. ghostscript: ghostscript: ghostscript: PACKAGE NAME: ghostscript-fonts-std-8.11-noarch-1.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 3434 K PACKAGE SIZE (uncompressed): 4830 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: ghostscript-fonts-std: ghostscript-fonts-std (fonts for the Ghostscript interpreter) ghostscript-fonts-std: ghostscript-fonts-std: These fonts are used by the GhostScript interpreter. ghostscript-fonts-std: ghostscript-fonts-std: ghostscript-fonts-std: ghostscript-fonts-std: ghostscript-fonts-std: ghostscript-fonts-std: ghostscript-fonts-std: ghostscript-fonts-std: PACKAGE NAME: groff-1.21-x86_64-1.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 1838 K PACKAGE SIZE (uncompressed): 8480 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: groff: groff (document formatting system) groff: groff: The GNU groff package provides versions of troff, nroff, eqn, tbl, and groff: other Unix text-formatting utilities. Groff is used to 'compile' man groff: pages stored in groff/nroff format into a form which can be printed or groff: displayed on the screen. These man pages are stored in compressed groff: form in the /usr/man/man? directories. groff: groff: groff: groff: PACKAGE NAME: gutenprint-5.2.6-x86_64-1.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 2053 K PACKAGE SIZE (uncompressed): 18150 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gutenprint: gutenprint (IJS printer driver for Ghostscript and CUPS) gutenprint: gutenprint: Gutenprint (formerly named Gimp-Print) is a suite of printer drivers gutenprint: that may be used with most common print spooling systems, including gutenprint: CUPS, LPRng, or others. These drivers provide high quality printing gutenprint: in many cases equal to or better than proprietary vendor-supplied gutenprint: drivers. Gutenprint also includes an enhanced print plug-in for the gutenprint: GIMP image editor. gutenprint: gutenprint: gutenprint: PACKAGE NAME: hibernate-script-2.0-x86_64-1vl70.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 65 K PACKAGE SIZE (uncompressed): 290 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: hibernate-script: hibernate-script (frontend to TuxOnIce hibernation engine) hibernate-script: hibernate-script: hibernate-script package contains a set of shell scripts to provide hibernate-script: TuxOnIce hibernation engine functionality. It does all the work to hibernate-script: prepare the computer for hibernation. Scriptlet API allows to perform hibernate-script: some actions like unloading modules or shutting applications. This hibernate-script: package is required to run TuxOnIce-patched kernel. hibernate-script: License: GPL hibernate-script: Authors: hibernate-script: Website: http://www.tuxonice.net PACKAGE NAME: hplip-3.11.1-x86_64-1vl70.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 12057 K PACKAGE SIZE (uncompressed): 22390 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: hplip: hplip (HP print/scan/fax support) hplip: hplip: HPLIP is an HP developed solution for printing, scanning, and faxing hplip: with HP inkjet and laser based printers in Linux. The HPLIP project hplip: provides printing support for more than 1400 HP printer models, hplip: including Deskjet, Officejet, Photosmart, PSC (Print Scan Copy), hplip: Business Inkjet, LaserJet, and LaserJet MFP. hplip: hplip: For more information, see: http://hplipopensource.com hplip: hplip: PACKAGE NAME: icon-naming-utils-0.8.90-x86_64-2.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 13 K PACKAGE SIZE (uncompressed): 80 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: icon-naming-utils: icon-naming-utils (generate icon files for your DE) icon-naming-utils: icon-naming-utils: It is a script for maintaining backwards compatibility icon-naming-utils: with current desktop icon themes, while migrating to icon-naming-utils: the names specified in the Icon Naming Specification. icon-naming-utils: icon-naming-utils: Homepage: http://tango.freedesktop.org icon-naming-utils: icon-naming-utils: icon-naming-utils: icon-naming-utils: PACKAGE NAME: js-1.8.0_rc1-x86_64-1vl70.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 549 K PACKAGE SIZE (uncompressed): 3350 K PACKAGE REQUIRED: glibc-solibs >= 2.13 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: js: js (Mozilla's JavaScript Engine) js: js: Mozilla's JavaScript Engine, standalone version of the Firefox js: javascript engine, aka SpiderMonkey js: js: js: js: License: MPL js: Authors: http://www.mozilla.org/js/spidermonkey js: Website: http://www.mozilla.org/js/spidermonkey PACKAGE NAME: linuxdoc-tools-0.9.66-x86_64-8vl70.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 4287 K PACKAGE SIZE (uncompressed): 41990 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: linuxdoc-tools: linuxdoc-tools (utilities for working with DocBook and SGML) linuxdoc-tools: linuxdoc-tools: SGML stands for Standard Generalized Markup Language. This is a linuxdoc-tools: system which allows you to produce LaTeX, HTML, GNU info, LyX, RTF, linuxdoc-tools: and plain text (via groff) from a single source file in SGML. It is linuxdoc-tools: often used for technical software documentation, such as the Linux linuxdoc-tools: HOWTO documents. linuxdoc-tools: linuxdoc-tools: This package includes everything you need to use SGML -- all of the linuxdoc-tools: standard SGML tools; OpenJade; tools for working with DocBook linuxdoc-tools: documents (various DTDs); xmlto and AsciiDoc. PACKAGE NAME: lm_sensors-3.1.2-x86_64-1.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 124 K PACKAGE SIZE (uncompressed): 480 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: lm_sensors: lm_sensors (hardware monitoring package) lm_sensors: lm_sensors: lm_sensors provides tools for monitoring the temperatures, voltages, lm_sensors: and fans of Linux systems with hardware monitoring devices. Included lm_sensors: are text-based tools for sensor reporting, and a library for sensors lm_sensors: access called libsensors. It also contains tools for sensor hardware lm_sensors: identification and I2C bus probing. lm_sensors: lm_sensors: IMPORTANT NOTE: If you have a Thinkpad, please read the warnings in lm_sensors: the README.thinkpad file. lm_sensors has been known to cause damage lm_sensors: to some Thinkpads. PACKAGE NAME: lsof-4.83-x86_64-1.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 270 K PACKAGE SIZE (uncompressed): 900 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: lsof: lsof (list open files) lsof: lsof: Lsof is a Unix-specific tool. Its name stands for "LiSt Open Files", lsof: and it does just that. It lists information about files that are open lsof: by the processes running on the system. lsof: lsof: Victor A. Abell of Purdue University is the developer of lsof. lsof: lsof: lsof: lsof: PACKAGE NAME: man-1.6f-x86_64-2.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 206 K PACKAGE SIZE (uncompressed): 520 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: man: man (format and display the on-line manual pages) man: man: The man package is a collection of tools used for searching and man: reading the online system documentation. In fact, on most UNIX-like man: operating systems it is the primary means of finding out how programs man: on the system work. For example, 'man man' will display the man: documentation for man itself. man: man: Man requires the groff text processing package. man: man: PACKAGE NAME: man-pages-3.32-noarch-1.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 2442 K PACKAGE SIZE (uncompressed): 5080 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: man-pages: man-pages (system documentation) man-pages: man-pages: Man pages are online documentation for Linux. This package includes man-pages: many section 1, 2, 3, 4, 5, 7, and 8 man pages for Linux. man-pages: man-pages: The man-pages distribution is maintained by Michael Kerrisk with man-pages: the help of more writers, editors, and other contributors than we man-pages: can name here. man-pages: man-pages: For more information, see http://www.kernel.org/doc/man-pages/ man-pages: PACKAGE NAME: mc-4.7.5.1-x86_64-2.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 1426 K PACKAGE SIZE (uncompressed): 5560 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: mc: mc (Midnight Commander file manager) mc: mc: The Midnight Commander is a Norton Commander clone, a program that mc: manipulates and manages files and directories. Useful, fast, and has mc: color displays on the Linux console. Mouse support is provided mc: through the gpm mouse server. This is a lightweight compilation of mc: mc for use on the text console or in an xterm. mc: mc: mc was written by Miguel de Icaza and Mauricio Plaza. mc: mc: PACKAGE NAME: mpg123-1.13.2-x86_64-1.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 237 K PACKAGE SIZE (uncompressed): 750 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: mpg123: mpg123 (a command-line mp3 player) mpg123: mpg123: mpg123 is a real time MPEG 1.0/2.0/2.5 audio player/decoder for mpg123: layers 1, 2, and 3 (MPEG 1.0 layer 3 aka MP3 most commonly tested). mpg123: mpg123: It is free software licensed under LGPL 2.1. mpg123: mpg123: Homepage: http://mpg123.org/ mpg123: mpg123: mpg123: PACKAGE NAME: nano-2.3.0-x86_64-1.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 383 K PACKAGE SIZE (uncompressed): 1780 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: nano: nano (Nano's ANOther editor, an enhanced free Pico clone) nano: nano: nano is a small, free, and friendly editor from the GNU project. It nano: aims to copy Pico's look and feel while providing additional (or nano: disabled by default) features that are missing from Pico, such as nano: "search and replace" or "go to line and column number". nano: nano: Chris Allegretta is Nano's author. nano: nano: nano: PACKAGE NAME: openrdate-1.2-x86_64-1vl70.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 16 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: openrdate: openrdate (date/time printing/setting program) openrdate: openrdate: Good-old rdate date- and time-setting software implementing RFC openrdate: 868 (inetd time) and RFC 2030 (SNTP/NTP) protocols. An independent openrdate: package of the OpenBSD's rdate program. openrdate: openrdate: Homepage: http://sourceforge.net/projects/openrdate/ openrdate: openrdate: openrdate: openrdate: PACKAGE NAME: pstoedit-3.50-x86_64-1vl70.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 411 K PACKAGE SIZE (uncompressed): 1930 K PACKAGE REQUIRED: imagemagick >= 6.4.9.2,gd >= 2.0.35,ghostscript >= 8.64,libemf >= 1.0.3,libpng >= 1.2.34,plotutils >= 2.5 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pstoedit: pstoedit (Translates PS and PDF graphics into other vector formats) pstoedit: pstoedit: Pstoedit converts PostScript and PDF files to various vector graphic pstoedit: formats. The resulting files can be edited or imported into various pstoedit: drawing packages. Pstoedit comes with a large set of integrated pstoedit: format drivers. pstoedit: pstoedit: http://www.pstoedit.net/ pstoedit: pstoedit: pstoedit: Packager: vl70@vector.linux.net on 26-Mar-2011 PACKAGE NAME: python-lxml-2.3-x86_64-1vl70.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 1662 K PACKAGE SIZE (uncompressed): 23790 K PACKAGE REQUIRED: libxslt >= 1.1.24,python >= 2.6 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: python-lxml: python-lxml (ElementTree-like Python bindings for libxml2 and libxslt) python-lxml: python-lxml: lxml provides a Python binding to the libxslt and libxml2 libraries. python-lxml: It follows the ElementTree API as much as possible in order to provide python-lxml: a more Pythonic interface to libxml2 and libxslt than the default python-lxml: bindings. In particular, lxml deals with Python Unicode strings python-lxml: rather than encoded UTF-8 and handles memory management automatically, python-lxml: unlike the default bindings. python-lxml: python-lxml: http://codespeak.net/lxml/ python-lxml: Packager: vl70@vector.linux.net on 26-Mar-2011 PACKAGE NAME: rpm-4.8.1-x86_64-1vl70.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 763 K PACKAGE SIZE (uncompressed): 3150 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: rpm: rpm (RPM package format tool) rpm: rpm: RPM is a tool from Red Hat Software used to install and remove rpm: packages in the .rpm format. When installing RPM packages on rpm: Slackware, you may need to use the --nodeps and --force options. rpm: Before installing any binary package, it's wise to examine it to rpm: see what it's going to do, and if it will overwrite any files. You rpm: can use rpm2tgz to convert .rpm packages to .tgz packages so you rpm: can look them over. rpm: rpm: PACKAGE NAME: screen-4.0.3-x86_64-1vl70.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 474 K PACKAGE SIZE (uncompressed): 830 K PACKAGE REQUIRED: glibc-solibs >= 2.13,ncurses >= 5.8,utempter >= 1.1.5 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: screen: screen (screen manager with VT100/ANSI terminal emulation) screen: screen: Screen is a full-screen window manager that multiplexes a physical screen: terminal between several processes (typically interactive shells). screen: Each virtual terminal provides the functions of a DEC VT100 terminal screen: and several control functions from the ISO 6492 (ECMA 48, ANSI X3.64) screen: and ISO 2022 standards (e.g. insert/delete line and support for screen: multiple character sets). screen: Website: http://www.gnu.org/software/screen/ screen: Author: . screen: License: GNU GPL PACKAGE NAME: sg3_utils-1.31-x86_64-1vl70.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 497 K PACKAGE SIZE (uncompressed): 1600 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: sg3_utils: sg3_utils (Utilities for devices that use SCSI command sets) sg3_utils: sg3_utils: Collection of Linux utilities for devices that use the SCSI command sg3_utils: set. sg3_utils: Includes utilities to copy data based on "dd" syntax and semantics sg3_utils: (called sg_dd, sgp_dd and sgm_dd); check INQUIRY data and VPD pages sg3_utils: (sg_inq); check mode and log pages (sginfo, sg_modes and sg_logs); sg3_utils: spin up and down disks (sg_start); do self tests (sg_senddiag); and sg3_utils: various other functions. sg3_utils: http://sg.danny.cz/sg/sg3_utils.html sg3_utils: Packager: vl70@vector.linux.net on 26-Mar-2011 PACKAGE NAME: sox-14.3.1-x86_64-2.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 358 K PACKAGE SIZE (uncompressed): 930 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: sox: sox (universal sound sample translator) sox: sox: Sox is a universal sound converter, player, and recorder. It can sox: play, record, and convert between several sound file formats such as sox: .au, .snd, .voc and .wav. sox: sox: sox: sox: sox: sox: PACKAGE NAME: sqlite-3.7.3-x86_64-1.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 367 K PACKAGE SIZE (uncompressed): 1030 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: sqlite: SQLite (simple, self contained database engine) sqlite: sqlite: SQLite is a small C library that implements a self-contained, sqlite: embeddable, zero-configuration SQL database engine. sqlite: sqlite: The SQLite distribution comes with a standalone command-line access sqlite: program (sqlite) that can be used to administer an SQLite database sqlite: and which serves as an example of how to use the SQLite library. sqlite: sqlite: Homepage: http://www.sqlite.org/ sqlite: PACKAGE NAME: sudo-1.7.4p6-x86_64-1.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 166 K PACKAGE SIZE (uncompressed): 480 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: sudo: sudo (give limited root privileges to certain users) sudo: sudo: 'sudo' is a command that allows users to execute some commands as sudo: root. The /etc/sudoers file (edited with 'visudo') specifies which sudo: users have access to sudo and which commands they can run. 'sudo' sudo: logs all its activities to /var/log/ so the system administrator sudo: can keep an eye on things. sudo: sudo: sudo: sudo: PACKAGE NAME: sysstat-9.0.6.1-x86_64-1.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 180 K PACKAGE SIZE (uncompressed): 820 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: sysstat: sysstat (System performance monitoring tools) sysstat: sysstat: The sysstat utilities are a collection of performance monitoring sysstat: tools for Linux. These include the iostat, mpstat, pidstat, sadf, sysstat: and sar tools. sysstat: sysstat: The sysstat utilities were written by Sebastien Godard. sysstat: sysstat: For more information, see the sysstat web site: sysstat: http://pagesperso-orange.fr/sebastien.godard/ sysstat: PACKAGE NAME: texinfo-4.13a-x86_64-4.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 743 K PACKAGE SIZE (uncompressed): 2400 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: texinfo: texinfo (GNU software documentation system) texinfo: texinfo: 'Texinfo' is a documentation system that uses a single source file to texinfo: produce both on-line information and printed output. Using Texinfo, texinfo: you can create a printed document with the normal features of a book, texinfo: including chapters, sections, cross references, and indices. From the texinfo: same Texinfo source file, you can create a menu-driven, on-line Info texinfo: file with nodes, menus, cross references, and indices. texinfo: texinfo: This package is needed to read the documentation files in /usr/info. texinfo: PACKAGE NAME: unrar-3.8.5-x86_64-1vl70.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 86 K PACKAGE SIZE (uncompressed): 200 K PACKAGE REQUIRED: cxxlibs >= 6.0.14-x86_64-1 | gcc-g++ >= 4.5.2-x86_64-2,gcc >= 4.5.2-x86_64-2,glibc-solibs >= 2.13-x86_64-1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: unrar: unrar (unpacker for the RAR archive format) unrar: unrar: WinRAR is a powerful archive manager. Unrar is an opensource subset unrar: of RAR from rarlab that can uncompress RAR images. unrar: unrar: unrar home: http://www.rarlab.com/rar_add.htm unrar: unrar: unrar: unrar: unrar: PACKAGE NAME: vim-7.3.138-x86_64-1.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 6421 K PACKAGE SIZE (uncompressed): 28120 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: vim: vim (Vi IMproved) vim: vim: Vim is an almost compatible version of the UNIX editor vi. Many new vim: features have been added: multi level undo, command line history, vim: filename completion, block operations, and more. vim: vim: Vim's development is led by Bram Moolenaar. vim: vim: This package also contains the Exuberant Ctags program vim: written by Darren Hiebert. vim: PACKAGE NAME: vorbis-tools-1.4.0-x86_64-1.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 172 K PACKAGE SIZE (uncompressed): 800 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: vorbis-tools: vorbis-tools (Ogg Vorbis Tools) vorbis-tools: vorbis-tools: The vorbis-tools package contains several basic tools for working with vorbis-tools: compressed audio files in the Ogg Vorbis (.ogg) format: vorbis-tools: vorbis-tools: oggenc (an .ogg encoder), ogg123 (a playback tool), vorbiscomment vorbis-tools: (add comments to vorbis files), ogginfo (show information about an vorbis-tools: ogg file), oggdec (a command line decoder), and vcut (a tool for vorbis-tools: splitting vorbis files). vorbis-tools: vorbis-tools: These tools require the libao, libogg, and libvorbis libraries. PACKAGE NAME: wvdial-1.61-x86_64-1vl70.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 93 K PACKAGE SIZE (uncompressed): 310 K PACKAGE REQUIRED: libwvstreams >= 4.6.1,lockdev >= 1.0.1,ppp >= 2.4.4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: wvdial: wvdial (A heuristic autodialer for PPP connections) wvdial: wvdial: WvDial automatically locates and configures modems and can log into wvdial: almost any ISP's server without special configuration. You need to wvdial: input the username, password, and phone number, and then WvDial will wvdial: negotiate the PPP connection using any mechanism needed. wvdial: wvdial: http://alumnit.ca/wiki/?WvStreams wvdial: wvdial: wvdial: Packager: vl70@vector.linux.net on 26-Mar-2011 PACKAGE NAME: xfsdump-3.0.4-x86_64-1.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 292 K PACKAGE SIZE (uncompressed): 870 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xfsdump: xfsdump (backup tools for the XFS filesystem) xfsdump: xfsdump: The xfsdump package contains the xfsdump and xfsrestore utilities for xfsdump: backing up and restoring XFS partitions. xfsdump examines files in a xfsdump: filesystem, determines which need to be backed up, and copies those xfsdump: files to a specified disk, tape or other storage medium. xfsrestore xfsdump: performs the inverse function of xfsdump; it can restore a full xfsdump: or incremental backup of a filesystem. xfsdump: xfsdump: xfsdump: PACKAGE NAME: zsh-4.3.10-x86_64-1vl70.txz PACKAGE LOCATION: ./ap PACKAGE SIZE (compressed): 1579 K PACKAGE SIZE (uncompressed): 5390 K PACKAGE REQUIRED: gdbm >= 1.8.3,glibc-solibs >= 2.13,ncurses >= 5.8 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: zsh: zsh (the Z shell) zsh: Zsh is a UNIX command interpreter (shell) which of the standard shells zsh: most resembles the Korn shell (ksh), although it is not completely zsh: compatible. It includes enhancements of many types, notably in the zsh: command-line editor, options for customizing its behavior, filename zsh: globbing, features to make C-shell (csh) users feel more at home and zsh: extra features drawn from tcsh (another 'custom' shell). Zsh was zsh: written by Paul Falstad. zsh: License: GPL zsh: Authors: Paul Falstad zsh: Website: http://www.zsh.org PACKAGE NAME: arch-makepkg-3.4.0-noarch-1vl70.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 63 K PACKAGE SIZE (uncompressed): 180 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: arch-makepkg: arch linux package builder adapted for VL with abs & fakeroot arch-makepkg: arch-makepkg: Gives a fake root environment, useful for building packages as a non arch-makepkg: -privileged user arch-makepkg: arch-makepkg: arch-makepkg: arch-makepkg: arch-makepkg: License: GPL arch-makepkg: Authors: arch-makepkg: Website: http://packages.debian.org/fakeroot PACKAGE NAME: autoconf-2.13-x86_64-1vl70.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 204 K PACKAGE SIZE (uncompressed): 790 K PACKAGE REQUIRED: perl >= 5.12.3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: autoconf: autoconf (generate configuration scripts) autoconf: autoconf: GNU autoconf is an extensible package of m4 macros that produce shell autoconf: scripts to automatically configure software source code packages. autoconf: These scripts can adapt the packages to many kinds of UNIX-like autoconf: systems without manual user intervention. Autoconf creates a autoconf: configuration script for a package from a template file that lists the autoconf: operating system features that the package can use, in the form of m4 autoconf: macro calls. You must install the "m4" package to be able to use autoconf: autoconf. autoconf: PACKAGE NAME: autoconf-2.65-noarch-1vl70.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 594 K PACKAGE SIZE (uncompressed): 2200 K PACKAGE REQUIRED: m4 >= 1.4.7 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: autoconf: autoconf (Generate configuration scripts) autoconf: autoconf: GNU autoconf is an extensible package of m4 macros that produce shell autoconf: scripts to automatically configure software source code packages. autoconf: These scripts can adapt the packages to many kinds of UNIX-like autoconf: systems without manual user intervention. Autoconf creates a autoconf: configuration script for a package from a template file that lists the autoconf: operating system features that the package can use, in the form of m4 autoconf: macro calls. You must install the "m4" package to be able to use autoconf: autoconf. http://www.gnu.org/software/autoconf/ autoconf: Packager: vl70@vector.Linux.net on 16-Jan-2011 PACKAGE NAME: automake-1.11.1-noarch-2.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 559 K PACKAGE SIZE (uncompressed): 1710 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: automake: automake (a Makefile generator) automake: automake: This is Automake, a Makefile generator. It was inspired by the 4.4BSD automake: make and include files, but aims to be portable and to conform to the automake: GNU standards for Makefile variables and targets. Automake is a Perl automake: script. The input files are called Makefile.am. The output files are automake: called Makefile.in; they are intended for use with Autoconf. Automake automake: requires certain things to be done in your configure.in. You must automake: install the "m4" and "perl" packages to be able to use automake. automake: automake: PACKAGE NAME: binutils-2.21.51.0.6-x86_64-1.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 3196 K PACKAGE SIZE (uncompressed): 16370 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: binutils: binutils (GNU binary development tools) binutils: binutils: Binutils is a collection of binary utilities. It includes "as" (the binutils: portable GNU assembler), "ld" (the GNU linker), and other utilities binutils: for creating and working with binary programs. binutils: binutils: These utilities are REQUIRED to compile C, C++, Objective-C, Fortran, binutils: and most other programming languages. binutils: binutils: binutils: PACKAGE NAME: bison-2.4.3-x86_64-2.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 424 K PACKAGE SIZE (uncompressed): 1490 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: bison: bison (parser generator similar to yacc) bison: bison: GNU "Bison" is a general-purpose parser generator that converts a bison: grammar description for an LALR(1) context-free grammar into a C bison: program to parse that grammar. bison: bison: Bison is upward compatible with Yacc: all properly-written Yacc bison: grammars ought to work with Bison with no change. Anyone familiar bison: with Yacc should be able to use Bison with little trouble. bison: bison: PACKAGE NAME: ccache-3.1.4-x86_64-1.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 73 K PACKAGE SIZE (uncompressed): 210 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: ccache: ccache (a fast compiler cache) ccache: ccache: ccache is a compiler cache. It speeds up re-compilation of C/C++ code ccache: by caching previous compiles and detecting when the same compile is ccache: being done again. ccache: ccache: ccache was written by Andrew Tridgell. ccache: ccache: ccache: ccache: PACKAGE NAME: cmake-2.8.4-x86_64-1.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 4699 K PACKAGE SIZE (uncompressed): 36040 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: cmake: CMake (cross-platform, open-source make system) cmake: cmake: CMake is used to control the software process using simple platform cmake: and compiler independed configuration files. CMake generates cmake: native makefiles and workspaces that can be used in the cmake: compiler environment of your choice. cmake: cmake: CMake's home on the web is: http://www.cmake.org cmake: cmake: cmake: PACKAGE NAME: cvs-1.11.23-x86_64-1.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 838 K PACKAGE SIZE (uncompressed): 1560 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: cvs: cvs (Concurrent Versions System) cvs: cvs: CVS is a version control system, which allows you to keep old versions cvs: of files (usually source code), keep a log of who, when, and why cvs: changes occurred, etc., like RCS or SCCS. It handles multiple cvs: developers, multiple directories, triggers to enable/log/control cvs: various operations, and can work over a wide area network. cvs: cvs: Some of the people who have worked on CVS include: Dick Grune, cvs: Brian Berliner, Jeff Polk, and others too numerous to mention. cvs: PACKAGE NAME: doxygen-1.7.3-x86_64-1.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 2941 K PACKAGE SIZE (uncompressed): 10580 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: doxygen: doxygen (documentation generator) doxygen: doxygen: Doxygen is a documentation system for C++, C, Java, IDL, and to some doxygen: extent PHP and C#. Doxygen generates project documentation using doxygen: special documentation blocks in the source code, easing the process of doxygen: keeping docs and code in sync. Doxygen produces documentation in doxygen: several output formats, including HTML, LaTeX, man pages, RTF, XML, doxygen: compressed HTML, PostScript, and PDF. doxygen: doxygen: doxygen: PACKAGE NAME: flex-2.5.35-x86_64-1.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 263 K PACKAGE SIZE (uncompressed): 830 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: flex: flex (fast lexical analyzer generator) flex: flex: flex is a tool for generating programs that perform pattern matching flex: on text. flex is a rewrite of the AT&T Unix lex tool (the two flex: implementations do not share any code, though), with some extensions flex: (and incompatibilities). flex: flex: flex: flex: flex: PACKAGE NAME: gcc-4.5.2-x86_64-2.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 11106 K PACKAGE SIZE (uncompressed): 38050 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gcc: gcc (Base GCC package with C support) gcc: gcc: GCC is the GNU Compiler Collection. gcc: gcc: This package contains those parts of the compiler collection needed to gcc: compile C code. Other packages add C++, Fortran, Objective-C, and gcc: Java support to the compiler core. gcc: gcc: gcc: gcc: PACKAGE NAME: gcc-g++-4.5.2-x86_64-2.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 4941 K PACKAGE SIZE (uncompressed): 22920 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gcc-g++: gcc-g++ (C++ for GCC) gcc-g++: gcc-g++: C++ support for the GNU Compiler Collection. gcc-g++: gcc-g++: This package contains those parts of the compiler collection needed to gcc-g++: compile C++ code. The base gcc package is also required. gcc-g++: gcc-g++: gcc-g++: gcc-g++: gcc-g++: PACKAGE NAME: gdb-7.2-x86_64-1.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 2341 K PACKAGE SIZE (uncompressed): 6930 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gdb: gdb (the GNU symbolic debugger) gdb: GDB, the GNU Project debugger, allows you to see what is going on gdb: inside another program while it executes -- or what another program gdb: was doing at the moment it crashed. GDB can do four main kinds of gdb: things to help you catch bugs in the act: 1) Start your program, gdb: specifying anything that might affect its behavior. 2) Make your gdb: program stop on specified conditions. 3) Examine what has happened, gdb: when your program has stopped. 4) Change things in your program, so gdb: you can experiment with correcting the effects of one bug and go on gdb: to learn about another. The program being debugged can be written in gdb: Ada, C, C++, Objective-C, Pascal and many other languages. PACKAGE NAME: gdbm-1.8.3-x86_64-4.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 42 K PACKAGE SIZE (uncompressed): 150 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gdbm: gdbm (GNU database routines) gdbm: gdbm: GNU dbm is a set of database routines that work similar to the gdbm: standard UNIX dbm routines. gdbm: gdbm: gdbm: gdbm: gdbm: gdbm: gdbm: PACKAGE NAME: gettext-tools-0.18.1.1-x86_64-1.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 2416 K PACKAGE SIZE (uncompressed): 8830 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gettext-tools: gettext-tools (internationalization framework tools) gettext-tools: gettext-tools: The GNU gettext-tools package is useful for authors and maintainers of gettext-tools: internationalized software, or for anyone compiling programs that gettext-tools: use the gettext functions. This package provides the needed tools and gettext-tools: library functions for the handling of messages in different languages. gettext-tools: Some other GNU packages use the gettext program (included in this gettext-tools: package) to internationalize the messages given by shell scripts. gettext-tools: gettext-tools: gettext-tools: PACKAGE NAME: git-1.7.4.1-x86_64-1vl70.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 2651 K PACKAGE SIZE (uncompressed): 12230 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: git: git (the stupid content tracker) git: git: Git is a fast, scalable, distributed revision control system with an git: unusually rich command set that provides both high-level operations git: and full access to internals. git: git: "git" can mean anything, depending on your mood. git: git: Git was originally written by Linus Torvalds and is currently git: maintained by Junio C. Hamano. git: PACKAGE NAME: gperf-3.0.4-x86_64-1.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 96 K PACKAGE SIZE (uncompressed): 280 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gperf: gperf (a perfect hash function generator) gperf: gperf: gperf is a perfect hash function generator written in C++. gperf: It transforms an n element user-specified keyword set W into a gperf: perfect hash function F. gperf currently generates the reserved gperf: keyword recognizer for lexical analyzers in several production and gperf: research compilers and language processing tools, including GNU C, gperf: GNU C++, GNU Java, GNU Pascal, GNU Modula 3, and GNU indent. gperf: gperf: gperf was written by by Douglas C. Schmidt and Bruno Haible. gperf: PACKAGE NAME: guile-1.8.8-x86_64-1.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 1510 K PACKAGE SIZE (uncompressed): 6270 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: guile: guile (GNU's extension language library) guile: guile: This is Guile, Project GNU's extension language library. Guile is an guile: interpreter for Scheme, packaged as a library that you can link into guile: your applications to give them their own scripting language. Guile guile: will eventually support other languages as well, giving users of guile: Guile-based applications a choice of languages. guile: guile: guile: guile: PACKAGE NAME: intltool-0.41.1-x86_64-1.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 43 K PACKAGE SIZE (uncompressed): 190 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: intltool: intltool (Utilities for translation support) intltool: intltool: This package contains scripts and autoconf files for intltool: internationalizing data. intltool: intltool: intltool: intltool: intltool: intltool: intltool: PACKAGE NAME: kernel-headers-2.6.37.4-x86-2.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 545 K PACKAGE SIZE (uncompressed): 2880 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: kernel-headers: kernel-headers (Linux kernel include files) kernel-headers: kernel-headers: These are the include files from the Linux kernel. kernel-headers: kernel-headers: You'll need these to compile most system software for Linux. kernel-headers: kernel-headers: kernel-headers: kernel-headers: kernel-headers: kernel-headers: PACKAGE NAME: kernel-stripped-src-3.0.4-x86_64-1vl70.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 10327 K PACKAGE SIZE (uncompressed): 82570 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: kernel-src: VectorLinux linux-3.0.4 kernel source kernel-src: stripped kernel source kernel-src: Built for Vectorlinux kernel-src: This is a stripped down kernel source kernel-src: tree. It is INCOMPLETE! kernel-src: It's used if you build a kernel modules kernel-src: for your devices, but it can't be used kernel-src: to build completely new kernel. kernel-src: based on the config-2.6.19.2-VLsleep kernel-src: by joe1962 kernel-src: Package Created By: Uel Archuletta PACKAGE NAME: libtool-2.4-x86_64-1.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 402 K PACKAGE SIZE (uncompressed): 2240 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libtool: libtool (a generic library support script) libtool: libtool: This is GNU Libtool, a generic library support script. Libtool hides libtool: the complexity of using shared libraries behind a consistent, portable libtool: interface. To use libtool, add the new generic library building libtool: commands to your Makefile, Makefile.in, or Makefile.am. See the libtool: documentation for details. libtool: libtool: You must install the "m4" package to be able to use libtool. libtool: libtool: PACKAGE NAME: lua-5.1.4-x86_64-3vl70.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 478 K PACKAGE SIZE (uncompressed): 1000 K PACKAGE REQUIRED: ncurses >= 5.6,readline >= 6.0 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: lua: lua (Powerful light-weight programming language) lua: lua: Lua is a powerful light-weight programming language designed for lua: extending applications. Lua is also frequently used as a lua: general-purpose, stand-alone language. Lua is free software. lua: Lua combines simple procedural syntax with powerful data description lua: constructs based on associative arrays and extensible semantics. Lua lua: is dynamically typed, interpreted from bytecodes, and has automatic lua: memory management with garbage collection, making it ideal for lua: configuration, scripting, and rapid prototyping. lua: http://www.lua.org/ Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: m4-1.4.16-x86_64-1.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 214 K PACKAGE SIZE (uncompressed): 510 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: m4: m4 (an implementation of the UNIX macro processor) m4: m4: This is GNU m4, a program which copies its input to the output, m4: expanding macros as it goes. m4 has built-in functions for including m4: named files, running commands, doing integer arithmetic, manipulating m4: text in various ways, recursion, etc... Macros can also be user- m4: defined, and can take any number of arguments. m4: m4: GNU 'm4' was originally written by Rene Seindal, from Denmark. m4: m4: PACKAGE NAME: make-3.82-x86_64-2.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 397 K PACKAGE SIZE (uncompressed): 1290 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: make: make (GNU make utility to maintain groups of programs) make: make: This is the GNU implementation of make, which was written by Richard make: Stallman and Roland McGrath. The purpose of the make utility is to make: determine automatically which pieces of a large program need to be make: recompiled, and issue the commands to recompile them. make: make: This is needed to compile just about any major C program, including make: the Linux kernel. make: make: PACKAGE NAME: nasm-2.09.04-x86_64-1.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 362 K PACKAGE SIZE (uncompressed): 1180 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: nasm: nasm (NASM assembler) nasm: nasm: NASM is the Netwide Assembler, a free portable assembler for the Intel nasm: 80x86 microprocessor series, using primarily the traditional Intel nasm: instruction mnemonics and syntax. nasm: nasm: NASM was written by Simon Tatham and Julian Hall. nasm: nasm: nasm: nasm: PACKAGE NAME: p2c-1.21alpha2-x86_64-3.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 307 K PACKAGE SIZE (uncompressed): 920 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: p2c: p2c (Pascal to C translator) p2c: p2c: P2c is a tool for translating Pascal programs into C. The input p2c: consists of a set of source files in any of the following Pascal p2c: dialects: HP Pascal, Turbo/UCSD Pascal, DEC VAX Pascal, Oregon p2c: Software Pascal/2, Macintosh Programmer's Workshop Pascal, p2c: Sun/Berkeley Pascal, Texas Instruments Pascal, Apollo Domain Pascal. p2c: Modula-2 syntax is also supported. Output is a set of .c and .h p2c: files that comprise an equivalent program in any of several dialects p2c: of C. p2c: PACKAGE NAME: perl-5.12.3-x86_64-1.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 14501 K PACKAGE SIZE (uncompressed): 62400 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: perl: perl (Practical Extraction and Report Language) perl: perl: Larry Wall's "Practical Extraction and Report Language". Perl is a perl: language optimized for scanning arbitrary text files, extracting perl: information from those text files, and printing reports based on that perl: information. It's also a good language for many system management perl: tasks. The language is intended to be practical (easy to use, perl: efficient, complete) rather than beautiful (tiny, elegant, minimal). perl: perl: perl: PACKAGE NAME: pkg-config-0.25-x86_64-1.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 64 K PACKAGE SIZE (uncompressed): 180 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pkg-config: pkg-config (system for managing library compile/link flags) pkg-config: pkg-config: pkg-config is a system for managing library compile/link flags pkg-config: that works with automake and autoconf. It replaces the ubiquitous pkg-config: *-config scripts you may have seen with a single tool. See the man pkg-config: page that comes with pkg-config for full documentation. pkg-config: pkg-config: pkg-config: pkg-config: pkg-config: PACKAGE NAME: pmake-1.111-x86_64-3.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 80 K PACKAGE SIZE (uncompressed): 220 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pmake: pmake (BSD parallel make) pmake: pmake: This is PMake -- a parallel Make program originally written for the pmake: Sprite operating system, ported from BSD Unix. This may be useful if pmake: you're going to port software with Makefiles designed for BSD. pmake: pmake: PMake was written by Adam de Boor. pmake: pmake: pmake: pmake: PACKAGE NAME: python-2.7.1-x86_64-3vl70.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 11548 K PACKAGE SIZE (uncompressed): 74570 K PACKAGE REQUIRED: bzip2 >= 1.0.6-x86_64-1,db44 >= 4.4.20-x86_64-2,expat >= 2.0.1-x86_64-2,fontconfig >= 2.8.0-x86_64-1,freetype >= 2.4.4-x86_64-1,gdbm >= 1.8.3-x86_64-4,glibc-solibs >= 2.13-x86_64-1,libX11 >= 1.4.1-x86_64-1,libXScrnSaver >= 1.2.1-x86_64-1,libXau >= 1.0.6-x86_64-1,libXdmcp >= 1.1.0-x86_64-1,libXext >= 1.2.0-x86_64-1,libXft >= 2.2.0-x86_64-1,libXrender >= 0.9.6-x86_64-1,libxcb >= 1.7-x86_64-1,ncurses >= 5.7-x86_64-3,openssl >= 0.9.8r-x86_64-1 | openssl-solibs >= 0.9.8r-x86_64-1,readline >= 5.2-x86_64-4,sqlite >= 3.7.3-x86_64-1,tcl >= 8.5.9-x86_64-1,tk >= 8.5.9-x86_64-1,zlib >= 1.2.5-x86_64-4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: python: python (object-oriented interpreted programming language) python: python: Python is an interpreted, interactive, object-oriented programming python: language that combines remarkable power with very clear syntax. python: Python's basic power can be extended with your own modules written in python: C or C++. Python is also adaptable as an extension language for python: existing applications. python: License: GPL python: Authors: python: Website: PACKAGE NAME: requiredbuilder-0.16.2-noarch-2vl70.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 24 K PACKAGE SIZE (uncompressed): 90 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: requiredbuilder: requiredbuilder (Dependency generator for packaging) requiredbuilder: requiredbuilder: RequiredBuilder is a simple tool to aid Slackware package requiredbuilder: developers in finding dependencies. For example it can be used to requiredbuilder: write Zenwalk style depfiles or slack-required files for slapt-get's requiredbuilder: dependency checking. requiredbuilder: requiredbuilder: requiredbuilder: License: GPL 3.0 requiredbuilder: Author: Stefano Stabellini requiredbuilder: Website: http://www.stabellini.net/requiredbuilder.html PACKAGE NAME: ruby-1.9.1_p431-x86_64-1.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 3301 K PACKAGE SIZE (uncompressed): 27410 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: ruby: ruby (Interpreted object-oriented scripting language) ruby: ruby: Ruby is an interpreted scripting language for quick and easy ruby: object-oriented programming. It has many features to process text ruby: files and to do system management tasks (as in Perl). It is simple, ruby: straight-forward, and extensible. ruby: ruby: Visit the Ruby project online at http://www.ruby-lang.org/ ruby: ruby: ruby: PACKAGE NAME: sbbuilder-0.4.12.4-noarch-1vl70.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 6 K PACKAGE SIZE (uncompressed): 40 K PACKAGE REQUIRED: perl >= 5.8.0-i586-1vl59 | perl >= 5.8.0-i586-1vl60 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: sbbuilder: sbbuilder (perl script for generating SlackBuilds) sbbuilder: sbbuilder: SlackBuild Builder its a small perl script for automating sbbuilder: the generation of SlackBuilds and the directory structure needed sbbuilder: for building packages compliant with the VectorLinux repository sbbuilder: standards. sbbuilder: sbbuilder: License: GPL sbbuilder: Authors: Kidd, rbistolfi sbbuilder: Website: http://vectorlinux.com PACKAGE NAME: sip-4.12.1-x86_64-1vl70.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 343 K PACKAGE SIZE (uncompressed): 1880 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: sip: SIP (a tool for generating Python bindings) sip: sip: SIP is a tool that makes it very easy to create Python bindings for sip: C and C++ libraries. It was originally developed to create PyQt, sip: the Python bindings for the Qt toolkit, but can be used to create sip: bindings for any C or C++ library. sip: sip: sip: sip: Homepage: http://www.riverbankcomputing.co.uk/software/sip/ sip: PACKAGE NAME: slacktrack-2.08-x86_64-1.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 92 K PACKAGE SIZE (uncompressed): 240 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: slacktrack: slacktrack (Slackware package building utilities) slacktrack: slacktrack: slacktrack tracks the installation of a 'make install' (or similar) slacktrack: and produces a Slackware compliant .tgz package from the results. slacktrack: It can be used to build packages from Slackware's '.build' scripts slacktrack: or your own. slacktrack: slacktrack: slacktrack tracks installations directly on the host's filesystem. slacktrack: slacktrack: slacktrack: PACKAGE NAME: strace-4.5.20-x86_64-1.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 100 K PACKAGE SIZE (uncompressed): 380 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: strace: strace (trace system calls and signals) strace: strace: Strace allows you to trace the execution of a command. It runs the strace: specified command until it exits, intercepting signals and system strace: calls and dumping the information to the standard error. System strace: administrators, diagnosticians and trouble-shooters will find it strace: invaluable for solving problems with programs for which the source strace: is not readily available since they do not need to be recompiled in strace: order to trace them. strace: strace: PACKAGE NAME: subversion-1.6.16-x86_64-1.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 3303 K PACKAGE SIZE (uncompressed): 18240 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: subversion: subversion (a version control system) subversion: subversion: Subversion is a version control system which allows you to keep old subversion: versions of files and directories (usually source code), and keep a subversion: log of who, when, and why changes occurred, similar to other such subversion: systems like CVS, RCS or SCCS. Subversion keeps all the information subversion: to permit extracting previous versions of those files at any time. subversion: subversion: For more information about the Subversion project, visit: subversion: http://subversion.apache.org subversion: PACKAGE NAME: vala-0.10.0-x86_64-1vl70.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 1433 K PACKAGE SIZE (uncompressed): 8210 K PACKAGE REQUIRED: devhelp >= 0.23,gtk+2 >= 2.16.1,gnome-common >= 2.24.0 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: vala|-----handy-ruler------------------------------------------------------| vala: vala (A modern programming language for GNOME) vala: vala: Vala is a new programming language that aims to bring modern vala: programming language features to GNOME developers without imposing vala: any additional runtime requirements and without using a different ABI vala: compared to applications and libraries written in C. vala: vala: http://live.gnome.org/Vala vala: vala: vala: Packager: vl70@vector.linux.net on 17-Feb-2011 PACKAGE NAME: yasm-1.1.0-x86_64-1.txz PACKAGE LOCATION: ./d PACKAGE SIZE (compressed): 517 K PACKAGE SIZE (uncompressed): 3770 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: yasm: yasm (complete rewrite of the NASM assembler) yasm: yasm: Yasm is a complete rewrite of the NASM assembler under the "new" BSD yasm: License (some portions are under other licenses, see COPYING for yasm: details). Yasm currently supports the x86 and AMD64 instruction sets, yasm: accepts NASM and GAS assembler syntaxes, outputs binary, ELF32, ELF64, yasm: 32 and 64-bit Mach-O, RDOFF2, COFF, Win32, and Win64 object formats, yasm: and generates source debugging information in STABS, DWARF 2, and yasm: CodeView 8 formats. yasm: yasm: yasm home: http://www.tortall.net/projects/yasm/ PACKAGE NAME: GConf-2.32.1-x86_64-2vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 915 K PACKAGE SIZE (uncompressed): 7640 K PACKAGE REQUIRED: glib2 >= 2.20.0,gtk+3 >= 3.0.0,orbit2 >= 2.14.17,libxml2 >= 2.7.3,openldap-client >= 2.4.21 | openldap >= 2.4.21,polkit >= 0.96 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: GConf: gconf (A process-transparent configuration system) GConf: GConf: GConf: is a process-transparent configuration database API used to GConf: store user preferences. It has pluggable backends and features to GConf: support workgroup administration. GConf: GConf: http://www.gnome.org GConf: GConf: GConf: GConf: PACKAGE NAME: SDL-1.2.14-x86_64-4vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 553 K PACKAGE SIZE (uncompressed): 2840 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: SDL: sdl (Simple DirectMedia Layer library) SDL: SDL: This is the Simple DirectMedia Layer, a generic API that provides low SDL: level access to audio, keyboard, mouse, joystick, 3D hardware via SDL: OpenGL, and 2D framebuffer across multiple platforms. SDL: SDL: SDL links against alsa-lib, arts, audiofile, esound, and the X11 SDL: libraries. Make sure all of these are installed if you're planning to SDL: use SDL (a full installation will cover all of the prerequisites). SDL: SDL: PACKAGE NAME: SDL_Pango-0.1.2-x86_64-6vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 33 K PACKAGE SIZE (uncompressed): 250 K PACKAGE REQUIRED: pango >= 1.22.3,sdl >= 1.2.13 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: SDL_Pango: SDL_Pango (Rendering of internationalized text for SDL) SDL_Pango: SDL_Pango: Pango is the text rendering engine of GNOME 2. SDL_Pango connects SDL_Pango: that engine to SDL, the Simple DirectMedia Layer. SDL_Pango: SDL_Pango: http://SDLpango.sourceforge.net/ SDL_Pango: SDL_Pango: SDL_Pango: Packager: vl70@vector.linux.net on 14-Feb-2011 SDL_Pango: SDL_Pango: PACKAGE NAME: SDL_Perl-2.2.6-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 292 K PACKAGE SIZE (uncompressed): 1130 K PACKAGE REQUIRED: libpng >= 1.4.0,sdl >= 1.2.13,sdl_gfx >= 2.0.16,sdl_image >= 1.2.6,sdl_mixer >= 1.2.8,sdl_net >= 1.2.7,sdl_ttf >= 2.0.9,perl-yaml >= 0.66 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: SDL_Perl: SDL_Perl (SDL bindings for the Perl language) SDL_Perl: SDL_Perl: SDL (Simple DirectMedia Layer) bindings for the perl language. SDL_Perl: SDL_Perl: http://sdl.perl.org/ SDL_Perl: SDL_Perl: SDL_Perl: Packager: vl70@vector.linux.net on 23-Feb-2011 SDL_Perl: SDL_Perl: SDL_Perl: PACKAGE NAME: a52dec-0.7.4-x86_64-3vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 49 K PACKAGE SIZE (uncompressed): 180 K PACKAGE REQUIRED: djbfft >= 0.76 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: a52dec: a52dec (A free ATSC A/52 stream decoder) a52dec: a52dec: liba52 is a free library for decoding ATSC A/52 streams. The A/52 a52dec: standard is used in a variety of applications, including digital a52dec: television and DVD. It is also known as AC-3. The package also a52dec: includes a52dec, a small test program for liba52. a52dec: a52dec: http://liba52.sourceforge.net/ a52dec: a52dec: a52dec: Packager: vl70@vector.linux.net on 26-Mar-2011 PACKAGE NAME: aalib-1.4rc5-x86_64-3.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 154 K PACKAGE SIZE (uncompressed): 600 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: aalib: aalib (ASCII Art library) _1l1vlvlvlvlvlvlvlvlvvl=. aalib: __111llvl+' __...._ +1lv11=. aalib: AA-lib is an ASCII art graphics _11vllvlv+ =vlvlvl1= /1vlvv1i=_ aalib: library. Internally, the AA-lib _vvllvlvlv= -+vlvlvlvlvlvlvlvdvl=_ aalib: API is similar to other graphics _:lvlvlvlvlv=. --^-^1lvlvlrlvv1s aalib: libraries, but it renders the =llvlvvlvlvv11lvl=.... -lvlevlvlvv aalib: the output into ASCII art (like =lvlvlvlvll-^+1vv11111v_ vlkllvllvl aalib: the example to the right :^) =lvlvlvlvl1 +1vv1v1lv _llvlvlvlvl aalib: The developers of AA-lib are +1lv |vlvl' -^-^- _1olvlvlvlv' aalib: Jan Hubicka, Thomas A. K. Kjaer, -1vl |lvlvlvlvlvlvlvlvv1vlvlvlvlv+. aalib: Tim Newsome, and Kamil Toman. +1 ^^^^^^^^^^^^^^^^^^^^^^^^vlv- aalib: -+uvlvlvlvlvlvlvlvlvlvlvlvl+_ aalib: -vlvlvlvlvlvlvlvllvlvl-' PACKAGE NAME: alsa-lib-1.0.24.1-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 388 K PACKAGE SIZE (uncompressed): 1700 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: alsa-lib: alsa-lib (Advanced Linux Sound Architecture library) alsa-lib: alsa-lib: The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI alsa-lib: functionality to the Linux operating system. This is the ALSA library alsa-lib: (libasound) which is used by audio applications. alsa-lib: alsa-lib: For more information, see http://alsa-project.org alsa-lib: alsa-lib: alsa-lib: alsa-lib: PACKAGE NAME: alsa-oss-1.0.17-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 31 K PACKAGE SIZE (uncompressed): 110 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: alsa-oss: alsa-oss (library/wrapper to use OSS programs with ALSA) alsa-oss: alsa-oss: The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI alsa-oss: functionality to the Linux operating system. OSS (Open Sound System) alsa-oss: is an older sound system for Linux that ALSA is replacing. Using alsa-oss: the aoss wrapper you can use programs that only support OSS with ALSA alsa-oss: without having to load the OSS compatibility kernel modules. alsa-oss: alsa-oss: alsa-oss: alsa-oss: PACKAGE NAME: apr-1.4.2-x86_64-2.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 205 K PACKAGE SIZE (uncompressed): 960 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: apr: apr (Apache Portable Runtime) apr: apr: The mission of the Apache Portable Runtime (APR) is to provide a apr: free library of C data structures and routines, forming a system apr: portability layer to as many operating systems as possible. apr: apr: apr: apr: apr: apr: PACKAGE NAME: apr-util-1.3.10-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 108 K PACKAGE SIZE (uncompressed): 470 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: apr-util: apr-util (Apache Portable Runtime utilities) apr-util: apr-util: The mission of the Apache Portable Runtime (APR) is to provide a apr-util: free library of C data structures and routines, forming a system apr-util: portability layer to as many operating systems as possible. apr-util: apr-util: This package contains additional utility interfaces for APR; apr-util: including support for XML, LDAP, database interfaces, URI parsing, apr-util: and more. apr-util: apr-util: PACKAGE NAME: aspell-0.60.6-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 579 K PACKAGE SIZE (uncompressed): 3190 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: aspell: aspell (spell checker) aspell: aspell: GNU Aspell is a spell checker designed to eventually replace Ispell. aspell: It can either be used as a library or as an independent spell checker. aspell: aspell: aspell: aspell: aspell: aspell: aspell: PACKAGE NAME: aspell-en-6.0_0-noarch-4.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 1065 K PACKAGE SIZE (uncompressed): 3550 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: aspell-en: aspell-en aspell-en: aspell-en: GNU Aspell 0.60 English Dictionary Package. aspell-en: aspell-en: aspell-en: aspell-en: aspell-en: aspell-en: aspell-en: aspell-en: PACKAGE NAME: atk-1.32.0-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 233 K PACKAGE SIZE (uncompressed): 2200 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: atk: atk (accessibility functions library) atk: atk: atk is a library of accessibility functions that is used by the atk: GTK+-2 toolkit. atk: atk: atk: atk: atk: atk: atk: PACKAGE NAME: atkmm-2.22.2-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 356 K PACKAGE SIZE (uncompressed): 1940 K PACKAGE REQUIRED: atk >= 1.32.0,gtlibmm >= 2.25.5 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: atkmm: atkmm (C++ interface for the ATK library) atkmm: atkmm: atkmm provides a C++ interface for the ATK library. Highlights include atkmm: typesafe callbacks, widgets extensible via inheritance and a atkmm: comprehensive set of widget classes that can be freely combined to atkmm: quickly create complex user interfaces. atkmm: atkmm: http://www.gtkmm.org/ atkmm: atkmm: atkmm: Packager: vl70@vector.linux.net on 26-Mar-2011 PACKAGE NAME: audiofile-0.2.7-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 118 K PACKAGE SIZE (uncompressed): 690 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: audiofile: audiofile (audio support library) audiofile: audiofile: Audiofile is a library to handle various audio file formats, and is audiofile: used by the esound daemon. You can also use it to develop your own audiofile: audiofile applications. audiofile: audiofile: audiofile: audiofile: audiofile: audiofile: PACKAGE NAME: babl-0.1.2-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 66 K PACKAGE SIZE (uncompressed): 280 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: babl: babl (pixel format translation library) babl: babl: babl is a dynamic, any to any, pixel format translation library. babl: babl: It allows converting between different methods of storing pixels known babl: as pixel formats that have with different bitdepths and other data babl: representations, color models and component permutations. babl: babl: A vocabulary to formulate new pixel formats from existing primitives is babl: provided as well as the framework to add new color models and data types. babl: PACKAGE NAME: boost-1.45.0-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 5269 K PACKAGE SIZE (uncompressed): 63440 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: boost: boost (Boost C++ Libraries) boost: boost: Boost provides free peer-reviewed portable C++ source libraries. boost: The emphasis is on libraries that work well with the C++ Standard boost: Library. One goal is to establish "existing practice" and provide boost: reference implementations so that the Boost libraries are suitable boost: for eventual standardization. boost: boost: Homepage: http://www.boost.org/ boost: boost: PACKAGE NAME: cairo-1.10.2-x86_64-4vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 1401 K PACKAGE SIZE (uncompressed): 7620 K PACKAGE REQUIRED: binutils >= 2.21.51.0.6,expat >= 2.0.1,fontconfig >= 2.8.0,freetype >= 2.4.4,glib2 >= 2.28.3,glibc-solibs >= 2.13,libX11 >= 1.4.2,libXau >= 1.0.6,libXdmcp >= 1.1.0,libXrender >= 0.9.6,libpng >= 1.4.5,libxcb >= 1.7,pixman >= 0.20.2,zlib >= 1.2.5 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: cairo: cairo (2D graphics library) cairo: Cairo is a 2D graphics library with support for multiple output cairo: devices. Currently supported output targets include the X cairo: Window System, Win32, image buffers, and PostScript, PDF, and cairo: SVG file output. Experimental backends include OpenGL (through cairo: Glitz), Quartz, and XCB. cairo: cairo: License: LGPL 2.1 / Mozilla Public License 1.1 cairo: Authors: http://cairographics.org cairo: Website: http://cairographics.org PACKAGE NAME: cairomm-1.9.8-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 286 K PACKAGE SIZE (uncompressed): 2700 K PACKAGE REQUIRED: cairo >= 1.8.6 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: cairomm: cairomm (C++ API for the cairo graphics library) cairomm: cairomm: Cairomm is the C++ API for the cairo graphics library. It offers all cairomm: the power of cairo with an interface familiar to C++ developers, cairomm: including use of the Standard Template Library where it makes sense. cairomm: cairomm: http://www.cairographics.org cairomm: cairomm: cairomm: Packager: vl70@vector.linux.net on 26-Mar-2011 cairomm: PACKAGE NAME: chmlib-0.40-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 25 K PACKAGE SIZE (uncompressed): 80 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: chmlib: chmlib (library for accessing CHM files) chmlib: chmlib: chmlib is a small library designed for accessing MS ITSS files. chmlib: The ITSS file format is used for Microsoft Html Help files (.chm), chmlib: which have been the predominant medium for software documentation chmlib: from Microsoft during the past several years, having superceded chmlib: the previously used .hlp file format. chmlib: chmlib: Homepage: http://www.jedrea.com/chmlib/ chmlib: chmlib: PACKAGE NAME: cython-0.14.1-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 1223 K PACKAGE SIZE (uncompressed): 7750 K PACKAGE REQUIRED: python >= 2.6 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: cython|-----handy-ruler------------------------------------------------------| cython: cython (A language for writing Python extension modules) cython: cython: This is a development version of Pyrex, a language for writing Python cython: extension modules. cython: cython: http://www.cython.org cython: cython: cython: Packager: root@vector.linux.net on 27-Feb-2011 cython: cython: PACKAGE NAME: db44-4.4.20-x86_64-2.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 688 K PACKAGE SIZE (uncompressed): 6580 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: db44: db4 (Berkeley database library version 4.4.x) db44: db44: The Berkeley Database (Berkeley DB) library provides embedded database db44: support for both traditional and client/server applications. db44: db44: This package should be installed if compatibility is needed with db44: databases created with the Berkeley DB version 4.4.x. db44: db44: db44: db44: PACKAGE NAME: dbus-glib-0.88-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 120 K PACKAGE SIZE (uncompressed): 740 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: dbus-glib: dbus-glib (Glib bindings for dbus) dbus-glib: dbus-glib: This package includes the glib bindings for the dbus IPC library. dbus-glib: dbus-glib: dbus-glib: dbus-glib: dbus-glib: dbus-glib: dbus-glib: dbus-glib: PACKAGE NAME: dbus-python-0.83.1-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 103 K PACKAGE SIZE (uncompressed): 720 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: dbus-python: dbus-python (Python bindings for dbus) dbus-python: dbus-python: This package includes python bindings for the D-Bus messagebus. dbus-python: dbus-python: dbus-python: dbus-python: dbus-python: dbus-python: dbus-python: dbus-python: PACKAGE NAME: desktop-file-utils-0.16-x86_64-2.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 44 K PACKAGE SIZE (uncompressed): 210 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: desktop-file-utils: desktop-file-utils (Utilities for manipulating desktop files) desktop-file-utils: desktop-file-utils: Some utilities from freedesktop.org for handling .desktop files: desktop-file-utils: desktop-file-utils: desktop-file-validate: validates a desktop file and prints desktop-file-utils: warnings/errors about spec violations. desktop-file-utils: desktop-file-install: installs a desktop file to the applications desktop-file-utils: directory, optionally munging it a bit in transit. desktop-file-utils: desktop-menu-tool: loads .vfolder-info and .menu files and does desktop-file-utils: operations on them. desktop-file-utils: PACKAGE NAME: dirac-1.0.2-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 3903 K PACKAGE SIZE (uncompressed): 34210 K PACKAGE REQUIRED: cxxlibs >= 6.0.14-x86_64-1 | gcc-g++ >= 4.5.2-x86_64-2,glibc-solibs >= 2.13-x86_64-1,perl >= 5.12.3-x86_64-1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: dirac: dirac (A general-purpose video codec) dirac: dirac: Dirac is a general-purpose video codec aimed at resolutions from QCIF dirac: (176x144) to HDTV (1920x1080) progressive or interlaced. It uses dirac: wavelets, motion compensation and arithmetic coding and aims to be dirac: competitive with other state of the art codecs. dirac: dirac: http://dirac.sourceforge.net/ dirac: dirac: dirac: PACKAGE NAME: directfb-1.4.3-x86_64-2vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 1203 K PACKAGE SIZE (uncompressed): 6700 K PACKAGE REQUIRED: freetype >= 2.3.9,libX11 >= 1.2.2,libXext >= 1.0.5,libjpeg >= 8,libpng >= 1.4.0,libv4l >= 0.6.0,libvncserver >= 0.9.1,sdl >= 1.2.14,sysfsutils >= 2.1.0,zlib >= 1.2.3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: directfb|-----handy-ruler------------------------------------------------------| directfb: directfb (Graphics abstraction library for the Linux Framebuffer) directfb: directfb: DirectFB is a thin library that provides hardware graphics directfb: acceleration, input device handling and abstraction, integrated directfb: windowing system with support for translucent windows and multiple directfb: display layers on top of the Linux Framebuffer Device. directfb: directfb: http://www.directfb.org/ directfb: directfb: directfb: Packager: vl70@vector.linux.net on 22-Feb-2011 PACKAGE NAME: djbfft-0.76-x86_64-3vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 35 K PACKAGE SIZE (uncompressed): 130 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: djbfft: djbfft (Extremely fast library for floating-point convolution) djbfft: djbfft: djbfft is an extremely fast library for floating-point convolution. djbfft: The current version holds most of the speed records for djbfft: double-precision FFTs on general-purpose computers. djbfft: djbfft: http://cr.yp.to/djbfft.html djbfft: djbfft: djbfft: Packager: vl70@vector.linux.net on 26-Mar-2011 djbfft: PACKAGE NAME: djvulibre-3.5.22-x86_64-2.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 913 K PACKAGE SIZE (uncompressed): 3050 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: djvulibre: djvulibre (web-centric document and image format) djvulibre: djvulibre: DjVu is a web-centric format and software platform for distributing djvulibre: documents and images. DjVu content downloads faster, displays and djvulibre: renders faster, looks nicer on a screen, and consume less client djvulibre: resources than competing formats. DjVu was originally developed at djvulibre: AT&T Labs-Research by Leon Bottou, Yann LeCun, Patrick Haffner, and djvulibre: many others. djvulibre: djvulibre: Homepage: http://djvu.sourceforge.net djvulibre: PACKAGE NAME: enchant-1.5.0-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 134 K PACKAGE SIZE (uncompressed): 480 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: enchant: Enchant (a wrapper for spellcheck libraries) enchant: enchant: Enchant supports: enchant: * Aspell/Pspell enchant: * Ispell enchant: * MySpell/HunSpell enchant: * Uspell (Yiddish, Hebrew and Eastern European languages) enchant: * Hspell (Hebrew) and others enchant: enchant: http://www.abisource.com/projects/enchant/ enchant: PACKAGE NAME: epydoc-3.0.1-x86_64-4vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 1212 K PACKAGE SIZE (uncompressed): 16980 K PACKAGE REQUIRED: python >= 2.6 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: epydoc|-----handy-ruler------------------------------------------------------| epydoc: epydoc (Automatic API documentation generation tool for Python) epydoc: epydoc: Epydoc is a tool for generating API documentation for Python modules, epydoc: based on their docstrings. epydoc: epydoc: http://epydoc.sourceforge.net/ epydoc: epydoc: epydoc: Packager: vl70@vector.linux.net on 14-Feb-2011 epydoc: epydoc: PACKAGE NAME: esound-0.2.41-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 96 K PACKAGE SIZE (uncompressed): 390 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: esound: esound (Enlightened Sound Daemon) esound: esound: EsounD, the Enlightened Sound Daemon, is a server process that mixes esound: several audio streams for playback by a single audio device. For esound: example, if you're listening to music on a CD and you receive a esound: sound-related event from ICQ, the two applications won't have to esound: jockey for the use of your sound card. Install esound if you'd like esound: to let sound applications share your audio device. esound: esound: esound: PACKAGE NAME: exiv2-0.21.1-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 831 K PACKAGE SIZE (uncompressed): 3840 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: exiv2: Exiv2 (Exif and IPTC Metadata Library and Tools) exiv2: exiv2: Exiv2 is a C++ library and a command line utility to read and write exiv2: Exif and IPTC image metadata. exiv2: exiv2: Homepage: http://www.exiv2.org/ exiv2: exiv2: exiv2: exiv2: exiv2: PACKAGE NAME: expat-2.0.1-x86_64-2.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 116 K PACKAGE SIZE (uncompressed): 670 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: expat: expat (C library for parsing XML) expat: expat: This is Expat, a C library for parsing XML, written by James Clark. expat: Expat is a stream-oriented XML parser used by Python, GNOME, Xft2, expat: and other things. expat: expat: expat: expat: expat: expat: PACKAGE NAME: faac-1.28-x86_64-3vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 55 K PACKAGE SIZE (uncompressed): 180 K PACKAGE REQUIRED: libmp4v2 >= 1.9.1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: faac: faac (Encoder and encoding library for MPEG2/4 AAC) faac: faac: FAAC is an AAC audio encoder. It currently supports MPEG-4 LTP, MAIN faac: and LOW COMPLEXITY object types and MAIN and LOW MPEG-2 object types. faac: It also supports multichannel and gapless encoding. faac: faac: http://www.audiocoding.com/ faac: faac: faac: Packager: vl70@vector.linux.net on 14-Feb-2011 faac: PACKAGE NAME: faad2-2.7-x86_64-4vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 168 K PACKAGE SIZE (uncompressed): 420 K PACKAGE REQUIRED: sysfsutils >= 2.1.0,xmms >= 1.2.11 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: faad2: faad2 (Library and frontend for decoding MPEG2/4 AAC) faad2: faad2: FAAD 2 is a LC, MAIN and LTP profile, MPEG2 and MPEG-4 AAC decoder, faad2: completely written from scratch. faad2: faad2: http://www.audiocoding.com/ faad2: faad2: faad2: Packager: vl70@vector.linux.net on 14-Feb-2011 faad2: faad2: PACKAGE NAME: farsight2-0.0.23-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 195 K PACKAGE SIZE (uncompressed): 1260 K PACKAGE REQUIRED: gstreamer >= 0.10.22,gst-plugins-base >= 0.10.22,libnice >= 0.0.9 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: farsight2: farsight2 (A audio/video conferencing framework) farsight2: farsight2: FarSight is an audio/video conferencing framework specifically farsight2: designed for Instant Messengers. It aims to provide a code structure farsight2: that will be able to absorb as many video conferencing protocols as farsight2: possible. It also offers an interface to those Instant Messengers, farsight2: allowing them to embed the video feeds and controls into them. farsight2: farsight2: http://farsight.freedesktop.org/wiki/ farsight2: farsight2: Packager: vl70@vector.linux.net on 26-Mar-2011 PACKAGE NAME: ffmpeg-0.6-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 3204 K PACKAGE SIZE (uncompressed): 13440 K PACKAGE REQUIRED: a52dec >= 0.7.4,faac >= 1.28,gsm >= 1.0.12,lame >= 3.98.2,libdc1394 >= 2.0.2,libdca >= 0.0.5,libnut >= 20090725,libogg >= 1.1.3,liboil >= 0.3.16,libtheora >= 1.0,libva >= 1.0.3,libvpx >= 20100615,libvorbis >= 1.2.3,opencore-amr >= 0.1.1,openjpeg >= 1.3,rtmpdump >= 2.3,schroedinger >= 1.0.5,sdl >= 1.2.13,x264 >= 20091020,xvidcore >= 1.2.1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: ffmpeg: FFmpeg (Video and audio converter) ffmpeg: ffmpeg: FFmpeg is a very fast audio and video converter. It can also grab ffmpeg: from a live A/V source. The command line interface is designed to be ffmpeg: intuitive, in the sense that FFmpeg tries to figure out all the ffmpeg: parameters, when possible. You have usually to give only the target ffmpeg: bitrate you want. FFmpeg can also convert from any sample rate to ffmpeg: any other, and resize video on the fly with a high quality polyphase ffmpeg: filter. ffmpeg: http://ffmpeg.mplayerhq.hu/ ffmpeg: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: fftw-3.2.2-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 1035 K PACKAGE SIZE (uncompressed): 4050 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: fftw: fftw (Fastest Fourier Transform in the West) fftw: fftw: FFTW is a free collection of fast C routines for computing the fftw: Discrete Fourier Transform in one or more dimensions. It includes fftw: complex, real, symmetric, and parallel transforms, and can handle fftw: arbitrary array sizes efficiently. FFTW is typically faster than fftw: other publically-available FFT implementations, and is even fftw: competitive with vendor-tuned libraries. fftw: fftw: Homepage: http://www.fftw.org/ fftw: PACKAGE NAME: freetype-2.4.4-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 410 K PACKAGE SIZE (uncompressed): 1880 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: freetype: freetype (A Free, High-Quality, and Portable Font Engine) freetype: freetype: The FreeType engine is a free and portable TrueType font rendering freetype: engine. It has been developed to provide TrueType support to a freetype: great variety of platforms and environments. freetype: freetype: freetype: freetype: freetype: freetype: PACKAGE NAME: fribidi-0.10.9-x86_64-2.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 44 K PACKAGE SIZE (uncompressed): 280 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: fribidi: fribidi (Unicode BiDirectional algorithm library) fribidi: fribidi: This library implements the Unicode BiDirectional algorithm, which fribidi: is needed in order to support right-to-left languages such as Arabic fribidi: and Hebrew. It is used in display software like KDE's SVG modules. fribidi: fribidi: fribidi: fribidi: fribidi: fribidi: PACKAGE NAME: fuse-2.8.5-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 123 K PACKAGE SIZE (uncompressed): 560 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: fuse: FUSE (Filesystem in Userspace) fuse: fuse: FUSE is a simple interface for userspace programs to export a virtual fuse: filesystem to the Linux kernel. FUSE also aims to provide a secure fuse: method for non privileged users to create and mount their own fuse: filesystem implementations. fuse: fuse: The FUSE web site can be found here: http://fuse.sourceforge.net fuse: fuse: fuse: PACKAGE NAME: gamin-0.1.10-x86_64-3vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 107 K PACKAGE SIZE (uncompressed): 480 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gamin: gamin (A minimalist FAM replacement) gamin: gamin: Gamin is a file and directory monitoring system defined to be a subset gamin: of the FAM (File Alteration Monitor) system. gamin: gamin: The homepage for Gamin is: http://www.gnome.org/~veillard/gamin/ gamin: gamin: gamin: gamin: gamin: PACKAGE NAME: gc-7.2alpha4-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 238 K PACKAGE SIZE (uncompressed): 1140 K PACKAGE REQUIRED: libatomic_ops >= 1.2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gc|-----handy-ruler------------------------------------------------------| gc: gc (C++ Garbage Collector) gc: gc: The Boehm-Demers-Weiser conservative garbage collector can be used as gc: a garbage collecting replacement for C malloc or C++ new. gc: gc: http://www.hpl.hp.com/personal/Hans_Boehm/gc/ gc: gc: gc: Packager: vl70@vector.linux.net on 25-Mar-2011 gc: gc: PACKAGE NAME: gd-2.0.35-x86_64-4.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 142 K PACKAGE SIZE (uncompressed): 700 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gd: gd (a graphics library) gd: gd: gd is a graphics library. It allows your code to quickly draw images gd: complete with lines, arcs, text, multiple colors, cut and paste from gd: other images, and flood fills, and write out the result as a PNG or gd: JPEG file. This is particularly useful in web applications, where gd: PNG and JPEG are two of the formats accepted for inline images by gd: most browsers. gd: gd: The gd library was written by Thomas Boutell. gd: PACKAGE NAME: gdk-pixbuf2-2.22.1-x86_64-2.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 562 K PACKAGE SIZE (uncompressed): 3500 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gdk-pixbuf2: gdk-pixbuf2 (image library used by GTK+ v2) gdk-pixbuf2: gdk-pixbuf2: The gdk-pixbuf library provides a number of features: gdk-pixbuf2: - GdkPixbuf structure for representing images. gdk-pixbuf2: - Image loading facilities, both synchronous and progressive. gdk-pixbuf2: - Rendering of a GdkPixbuf into various formats: gdk-pixbuf2: drawables (windows, pixmaps), GdkRGB buffers. gdk-pixbuf2: - Fast scaling and compositing of pixbufs. gdk-pixbuf2: - Simple animation loading (ie. animated gifs). gdk-pixbuf2: gdk-pixbuf2: PACKAGE NAME: gegl-0.1.2-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 327 K PACKAGE SIZE (uncompressed): 1910 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gegl: GEGL (Generic Graphics Library) gegl: gegl: GEGL (Generic Graphics Library) is a graph based image processing gegl: framework. gegl: gegl: GEGL provides infratructure to do demand based cached non destructive gegl: image editing on larger than RAM buffers. Through babl it provides gegl: support for a wide range of color models and pixel storage formats for gegl: input and output. gegl: gegl: PACKAGE NAME: giflib-4.1.6-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 167 K PACKAGE SIZE (uncompressed): 830 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: giflib: giflib (GIF image format library) giflib: giflib: A library to load and save (uncompressed only) images using GIF, giflib: or Graphics Interchange Format. GIF was introduced by CompuServe giflib: in 1987, but is still widely used today (especially on web pages.) giflib: giflib: giflib: giflib: giflib: giflib: PACKAGE NAME: glew-1.5.7-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 262 K PACKAGE SIZE (uncompressed): 2530 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: glew: glew (the OpenGL Extension Wrangler Library) glew: glew: The OpenGL Extension Wrangler Library (GLEW) is a cross-platform glew: open-source C/C++ extension loading library. GLEW provides efficient glew: run-time mechanisms for determining which OpenGL extensions are glew: supported on the target platform. glew: glew: Homepage: http://glew.sourceforge.net/ glew: glew: glew: PACKAGE NAME: glib-1.2.10-x86_64-3.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 142 K PACKAGE SIZE (uncompressed): 750 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: glib: glib (library of C routines, version 1.x) glib: glib: GLib is a library which includes support routines for C such as lists, glib: trees, hashes, memory allocation, and many other things. glib: glib: GLib is required by nearly everything that uses GTK+ version 1.x. glib: glib: glib: glib: glib: PACKAGE NAME: glib2-2.28.3-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 2758 K PACKAGE SIZE (uncompressed): 26390 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: glib2: glib2 (library of C routines) glib2: glib2: GLib is a library which includes support routines for C such as lists, glib2: trees, hashes, memory allocation, and many other things. glib2: glib2: glib2: glib2: glib2: glib2: glib2: PACKAGE NAME: glibc-2.13-x86_64-3.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 11511 K PACKAGE SIZE (uncompressed): 138180 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: glibc: glibc (GNU C libraries) glibc: glibc: This package contains the GNU C libraries and header files. The GNU glibc: C library was written originally by Roland McGrath, and is currently glibc: maintained by Ulrich Drepper. Some parts of the library were glibc: contributed or worked on by other people. glibc: glibc: You'll need this package to compile programs. glibc: glibc: glibc: PACKAGE NAME: glibc-i18n-2.13-x86_64-3.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 6470 K PACKAGE SIZE (uncompressed): 111210 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: glibc-i18n: glibc-i18n (locale files from glibc) glibc-i18n: glibc-i18n: These files go in /usr/lib/locale and /usr/share/i18n/ to provide glibc-i18n: internationalization support. You'll need this package unless you glibc-i18n: will be using US English only. glibc-i18n: glibc-i18n: glibc-i18n: glibc-i18n: glibc-i18n: glibc-i18n: PACKAGE NAME: glibmm-2.25.5-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 611 K PACKAGE SIZE (uncompressed): 4310 K PACKAGE REQUIRED: glib2 >= 2.20.0,libsigc++ >= 2.2.3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: glibmm: glibmm (C++ interface for GTK2) glibmm: glibmm: gtkmm provides a C++ interface to the GTK+ GUI library. gtkmm2 wraps glibmm: GTK+ 2. Highlights include typesafe callbacks, widgets extensible via glibmm: inheritance and a comprehensive set of widget classes that can be glibmm: freely combined to quickly create complex user interfaces. glibmm: glibmm: http://gtkmm.sourceforge.net/ glibmm: glibmm: glibmm: Packager: vl70@vector.linux.net on 26-Mar-2011 PACKAGE NAME: gmime-2.4.15-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 239 K PACKAGE SIZE (uncompressed): 2060 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gmime: gmime (MIME parsing library) gmime: gmime: GMime is a set of utilities for parsing and creating messages using gmime: the Multipurpose Internet Mail Extension (MIME) as defined by many gmime: Internet RFCs. gmime: gmime: Jeffrey Stedfast is the author of GMime. gmime: gmime: gmime: gmime: PACKAGE NAME: gmp-5.0.1-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 458 K PACKAGE SIZE (uncompressed): 3000 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gmp: gmp (GNU multiple precision arithmetic library) gmp: gmp: GNU MP is a library for arbitrary precision arithmetic, operating on gmp: signed integers, rational numbers, and floating point numbers. It has gmp: a rich set of functions, and the functions have a regular interface. gmp: gmp: gmp: gmp: gmp: gmp: PACKAGE NAME: gnome-common-2.28.0-noarch-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 104 K PACKAGE SIZE (uncompressed): 550 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gnome-common: gnome-common (Useful things common to building gnome packages) gnome-common: gnome-common: This package contains sample files that should be used to develop gnome-common: pretty much every GNOME application. The programs included here are gnome-common: not needed for running gnome apps or building ones from distributed gnome-common: tarballs. They are only useful for compiling from CVS sources or when gnome-common: developing the build infrastructure for a GNOME application. gnome-common: gnome-common: http://developer.gnome.org gnome-common: gnome-common: Packager: vl70@vector.Linux.net on 16-Jan-2011 PACKAGE NAME: gnome-keyring-2.32.1-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 898 K PACKAGE SIZE (uncompressed): 6560 K PACKAGE REQUIRED: dbus >= 1.2.12,gtk+2 >= 2.16.,libgnome-keyring >= 2.30.0,libtasn1 >= 1.8,libgcrypt >= 1.4.4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gnome-keyring: gnome-keyring (A framework for managing user passwords and secrets) gnome-keyring: gnome-keyring: gnome-keyring manages passwords and other types of secrets for the gnome-keyring: user, storing them encrypted with a main password. Applications can gnome-keyring: use the gnome-keyring library to integrate with the keyring. gnome-keyring: gnome-keyring: http://www.gnome.org gnome-keyring: gnome-keyring: gnome-keyring: Packager: vl70@vector.linux.net on 25-Feb-2011 gnome-keyring: PACKAGE NAME: gnome-python-2.28.1-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 79 K PACKAGE SIZE (uncompressed): 560 K PACKAGE REQUIRED: gconf >= 2.26.0,glib2 >= 2.20.1,gnome-vfs >= 2.24.1,gtk+2 >= 2.16.1,libbonobo >= 2.24.1,libbonoboui >= 2.24.1,libglade >= 2.6.3,libgnome >= 2.24.0,libgnomeui >= 2.24.0,libgnomecanvas >= 2.26.0,pango >= 1.24.0,python >= 2.6.1,pygtk >= 2.14.1,pyorbit >= 2.24.0 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gnome-python: gnome-python (The sources for the PyGNOME Python extension module) gnome-python: gnome-python: The gnome-python package contains the source packages for the Python gnome-python: bindings for GNOME called PyGNOME. gnome-python: PyGNOME is an extension module for Python that provides access to the gnome-python: base GNOME libraries, so you have access to more widgets, a simple gnome-python: configuration interface, and metadata support. gnome-python: gnome-python: http://ftp.gnome.org/pub/GNOME/sources/gnome-python/ gnome-python: gnome-python: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: gnome-vfs-2.24.4-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 944 K PACKAGE SIZE (uncompressed): 7010 K PACKAGE REQUIRED: acl >= 2.2.47,avahi >= 0.6.24,dbus >= 1.2.12,dbus-glib >= 0.80,gconf >= 2.26.0,glib2 >= 2.20.0,gnome-mime-data >= 2.18.0,keyutils >= 1.2,libgamin >= 0.1.10,libxml2 >= 2.7.3,orbit2 >= 2.14.17,samba >= 3.2.3,popt >= 1.14,shared-mime-info,zlib >= 1.2.3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gnome-vfs: gnome-vfs (The GNOME virtual file-system libraries) gnome-vfs: gnome-vfs: GNOME VFS is the GNOME virtual file system. It is the foundation of gnome-vfs: the Nautilus file manager. It provides a modular architecture and gnome-vfs: ships with several modules that implement support for file systems, gnome-vfs: http, ftp, and others. It provides a URI-based API, backend gnome-vfs: supporting asynchronous file operations, a MIME type manipulation gnome-vfs: library, and other features. gnome-vfs: gnome-vfs: http://www.gnome.org/ gnome-vfs: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: gobject-introspection-0.10.2-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 836 K PACKAGE SIZE (uncompressed): 7300 K PACKAGE REQUIRED: glib2 >= 2.28.3,glibc-solibs >= 2.13,libffi >= 3.0.9,python >= 2.7.1,zlib >= 1.2.5 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gobject-introspection: gobject-introspection (Introspection system for GObject-based libraries) gobject-introspection: gobject-introspection: GObject Introspection can scan C header and source files in order to gobject-introspection: generate introspection "typelib" files. It also provides an API to gobject-introspection: examine typelib files, useful for creating language bindings among gobject-introspection: other things. gobject-introspection: gobject-introspection: License: GPL gobject-introspection: Authors: gobject-introspection: Website: http://live.gnome.org/GObjectIntrospection PACKAGE NAME: goffice-0.8.10-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 1310 K PACKAGE SIZE (uncompressed): 8680 K PACKAGE REQUIRED: glib2 >= 2.22.2,gtk+2 >= 2.18.3,libglade >= 2.6.4,libgsf >= 1.14.16 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: goffice: goffice (Goffice support libraries) goffice: goffice: Support libraries for gnome office. goffice: goffice: http://freshmeat.net/projects/goffice/ goffice: goffice: goffice: Packager: vl70@vector.linux.net on 26-Mar-2011 goffice: goffice: goffice: PACKAGE NAME: goffice-0.8.8-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 1290 K PACKAGE SIZE (uncompressed): 8580 K PACKAGE REQUIRED: glib2 >= 2.22.2,gtk+2 >= 2.18.3,libglade >= 2.6.4,libgsf >= 1.14.16 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: goffice|-----handy-ruler------------------------------------------------------| goffice: goffice (Goffice support libraries) goffice: goffice: Support libraries for gnome office. goffice: goffice: http://freshmeat.net/projects/goffice/ goffice: goffice: goffice: Packager: vl70@vector.linux.net on 14-Feb-2011 goffice: goffice: goffice: PACKAGE NAME: gsl-1.14-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 1369 K PACKAGE SIZE (uncompressed): 8270 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gsl: gsl (The GNU Scientific Library for numerical analysis) gsl: gsl: The gsl-devel package contains the header files and static libraries gsl: necessary for developing programs using the GSL (GNU Scientific gsl: Library). gsl: gsl: http://www.gnu.org/software/gsl/ gsl: gsl: gsl: Packager: vl70@vector.linux.net on 26-Mar-2011 gsl: PACKAGE NAME: gsm-1.0.13-x86_64-2vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 39 K PACKAGE SIZE (uncompressed): 140 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gsm: gsm (Shared libraries for GSM speech compressor) gsm: gsm: Contains runtime shared libraries for libgsm, an implementation of gsm: the European GSM 06.10 provisional standard for full-rate speech gsm: transcoding, prI-ETS 300 036, which uses RPE/LTP (residual pulse gsm: excitation/long term prediction) coding at 13 kbit/s. gsm: gsm: http://kbs.cs.tu-berlin.de/~jutta/toast.html gsm: gsm: gsm: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: gst-plugins-bad-0.10.20-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 768 K PACKAGE SIZE (uncompressed): 4720 K PACKAGE REQUIRED: alsa-libs >= 1.0.19,amrwb >= 7.0.0.2,celt >= 0.7.0,faac >= 1.28,faad2 >= 2.7,exempi >= 2.0.2,flite >= 1.3,game-music-emu >= 0.5.5,glib2 >= 2.20.0,gmyth >= 0.4,gsm >= 1.0.12,gstreamer >= 0.10.22,gst-plugins-base >= 0.10.22,gtk+2 >= 2.16.0,jack >= 0.116.2,ladspa >= 1.13,libcdaudio >= 0.99.12p2,libdca >= 0.0.5,libdc1394 >= 2.0.2,libiptcdata >= 1.0.3,libmms >= 0.4,libmodplug >= 0.8.4,libmusicbrainz >= 2.1.5,liboil >= 0.3.15,libpng >= 1.4.1,libtimidity >= 0.1.0,libvdpau >= 0.2,libvpx >= 0.9.0,mjpegtools >= 1.9.0,musepack >= r435,neon >= 0.28.3,orc >= 0.4.3,sdl >= 1.2.13,soundtouch >= 1.3.1,twolame >= 0.3.12,vcdimager >= 0.7.23,wavpack >= 4.50.1,wildmidi >= 0.2.2,zbar >= 0.10 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gst-plugins-bad: gst-plugins-bad (GStreamer streaming media framework "bad" plug-ins) gst-plugins-bad: gst-plugins-bad: This package contains GStreamer plug-ins that have licensing issues, gst-plugins-bad: aren't tested well enough, or the code is not of good enough quality. gst-plugins-bad: gst-plugins-bad: http://gstreamer.freedesktop.org/ gst-plugins-bad: gst-plugins-bad: gst-plugins-bad: Packager: vl70@vector.linux.net on 14-Feb-2011 gst-plugins-bad: gst-plugins-bad: PACKAGE NAME: gst-plugins-base-0.10.32-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 1109 K PACKAGE SIZE (uncompressed): 9020 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gst-plugins-base: gst-plugins-base (base set of GStreamer plugins) gst-plugins-base: gst-plugins-base: GStreamer Base Plug-ins is a well-groomed and well-maintained gst-plugins-base: collection of GStreamer plug-ins and elements, spanning the gst-plugins-base: range of possible types of elements one would want to write gst-plugins-base: for GStreamer. It also contains helper libraries and base gst-plugins-base: classes useful for writing elements. A wide range of video gst-plugins-base: and audio decoders, encoders, and filters are included. gst-plugins-base: gst-plugins-base: gst-plugins-base: PACKAGE NAME: gst-plugins-good-0.10.27-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 872 K PACKAGE SIZE (uncompressed): 3800 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gst-plugins-good: gst-plugins-good (good set of GStreamer plugins) gst-plugins-good: gst-plugins-good: GStreamer Good Plug-ins is a set of plug-ins that have good gst-plugins-good: quality code, correct functionality, and a good license gst-plugins-good: (LGPL for the plug-in code, LGPL or LGPL-compatible for the gst-plugins-good: supporting library). gst-plugins-good: gst-plugins-good: gst-plugins-good: gst-plugins-good: gst-plugins-good: PACKAGE NAME: gst-plugins-ugly-0.10.16-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 162 K PACKAGE SIZE (uncompressed): 660 K PACKAGE REQUIRED: a52dec >= 0.7.4,alsa-libs >= 1.0.19,amrnb >= 7.0.0.2,cairo >= 1.8.6,esound >= 0.2.41,gstreamer >= 0.10.22,gst-plugins-base >= 0.10.22,gst-plugins-good >= 0.10.13,gtk+2 >= 2.16.0,lame >= 3.98.2,libcdio >= 0.82,libdvdread >= 4.1.3,libid3tag >= 0.15.1b,libmad >= 0.15.1b,libmpeg2 >= 0.5.1,liboil >= 0.3.15,libsidplay >= 1.36.59,x264 >= 20091020 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gst-plugins-ugly: gst-plugins-ugly (GStreamer streaming media framework "ugly" plug-ins) gst-plugins-ugly: gst-plugins-ugly: This package contains well-written GStreamer plug-ins that can't be gst-plugins-ugly: shipped in gstreamer-plugins-good because: gst-plugins-ugly: - the license is not LGPL gst-plugins-ugly: - the license of the library is not LGPL gst-plugins-ugly: - there are possible licensing issues with the code. gst-plugins-ugly: gst-plugins-ugly: http://gstreamer.freedesktop.org/ gst-plugins-ugly: gst-plugins-ugly: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: gst-python-0.10.19-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 239 K PACKAGE SIZE (uncompressed): 1330 K PACKAGE REQUIRED: gstreamer >= 0.10.23,gst-plugins-base >= 0.10.23,pygtk >= 2.14.1,python >= 2.6.2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gst-python: gst-python (Python bindings for GStreamer) gst-python: gst-python: This module contains a wrapper that allows GStreamer applications gst-python: to be written in Python. gst-python: gst-python: http://gstreamer.freedesktop.org/ gst-python: gst-python: gst-python: Packager: vl70@vector.linux.net on 26-Mar-2011 gst-python: gst-python: PACKAGE NAME: gstreamer-0.10.32-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 1122 K PACKAGE SIZE (uncompressed): 10610 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gstreamer: GStreamer (streaming multimedia framework) gstreamer: gstreamer: GStreamer is a library that allows the construction of graphs of a gstreamer: media-handling components, ranging from simple Ogg/Vorbis playback gstreamer: to complex audio (mixing) and video (non-linear editing) processing. gstreamer: Applications can take advantage of advances in codec and filter gstreamer: technology transparently. Developers can add new codecs and filters gstreamer: by writing a simple plugin with a clean, generic interface. gstreamer: gstreamer: GStreamer is released under the LGPL. gstreamer: PACKAGE NAME: gtk+-1.2.10-x86_64-5.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 1022 K PACKAGE SIZE (uncompressed): 6250 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gtk+: gtk+ (graphical user interface toolkit, version 1.x) gtk+: gtk+: GTK+, which stands for the Gimp ToolKit, is a library for creating gtk+: graphical user interfaces for the X Window System. gtk+: gtk+: This library has been largely replaced by GTK+ version 2, but there gtk+: are still some good programs that require it. gtk+: gtk+: gtk+: gtk+: PACKAGE NAME: gtk+2-2.24.3-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 6385 K PACKAGE SIZE (uncompressed): 50020 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gtk+2: GTK+ version 2 (multi-platform GUI toolkit) gtk+2: gtk+2: This is GTK+, a multi-platform toolkit for creating graphical user gtk+2: interfaces. Offering a complete set of widgets, GTK+ is suitable for gtk+2: projects ranging from small one-off projects to complete application gtk+2: suites. gtk+2: gtk+2: gtk+2: gtk+2: gtk+2: PACKAGE NAME: gtk-engines-2.20.1-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 420 K PACKAGE SIZE (uncompressed): 2380 K PACKAGE REQUIRED: gtk+2 >= 2.16.0 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gtk-engines: gtk-engines (Theme engines for GTK+ 2.0) gtk-engines: gtk-engines: The gtk-engines package contains shared objects and configuration gtk-engines: files that implement a number of GTK+ theme engines. Theme engines gtk-engines: provide different looks for GTK+, some of which resemble other gtk-engines: toolkits or operating systems. gtk-engines: gtk-engines: ftp://ftp.gnome.org/pub/GNOME/sources/gtk-engines gtk-engines: gtk-engines: gtk-engines: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: gtk-murrine-engine-0.98.1.1-x86_64-2vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 89 K PACKAGE SIZE (uncompressed): 340 K PACKAGE REQUIRED: cairo >= 1.8.6,gtk+2 >= 2.16.1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gtk-murrine-engine|-----handy-ruler------------------------------------------------------| gtk-murrine-engine: gtk-murrine-engine (Murrine GTK2 engine) gtk-murrine-engine: gtk-murrine-engine: Murrine is a cairo-based fast gtk2 theme engine. gtk-murrine-engine: gtk-murrine-engine: http://www.cimitan.com/murrine/ gtk-murrine-engine: gtk-murrine-engine: gtk-murrine-engine: Packager: vl70@vector.linux.net on 14-Feb-2011 gtk-murrine-engine: gtk-murrine-engine: gtk-murrine-engine: PACKAGE NAME: gtkglext-1.2.0-x86_64-7vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 188 K PACKAGE SIZE (uncompressed): 1760 K PACKAGE REQUIRED: glib2 >= 2.20.1,gtk+2 >= 2.16.1,mesa >= 7.4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gtkglext: gtkglext (OpenGL Extension to GTK) gtkglext: gtkglext: GtkGLExt is an OpenGL extension to GTK. It provides the GDK objects gtkglext: which support OpenGL rendering in GTK, and GtkWidget API add-ons to gtkglext: make GTK+ widgets OpenGL-capable. gtkglext: gtkglext: http://gtkglext.sourceforge.net/ gtkglext: gtkglext: gtkglext: Packager: vl70@vector.linux.net on 14-Feb-2011 gtkglext: PACKAGE NAME: gtkmathview-0.8.0-x86_64-2vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 551 K PACKAGE SIZE (uncompressed): 3290 K PACKAGE REQUIRED: glib2 >= 2.18.1,gtk+2 >= 2.14.3,libxml2 >= 2.6.32,libxslt >= 1.1.24,popt >= 1.14 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gtkmathview|-----handy-ruler------------------------------------------------------| gtkmathview: gtkmathview (A MathML rendering library) gtkmathview: gtkmathview: GtkMathView is a C++ rendering engine for MathML documents. gtkmathview: It provides an interactive view that can be used for browsing gtkmathview: and editing MathML markup. gtkmathview: gtkmathview: http://helm.cs.unibo.it/mml-widget/ gtkmathview: gtkmathview: gtkmathview: Packager: vl70@vector.linux.net on 14-Feb-2011 gtkmathview: PACKAGE NAME: gtkmm-2.24.0-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 8050 K PACKAGE SIZE (uncompressed): 62120 K PACKAGE REQUIRED: atkmm >= 2.22.0,cairomm >= 1.8.0,glibmm >= 2.20.0,gtk+2 >= 2.16.0,pangomm >= 2.24.0 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gtkmm: gtkmm (C++ interface for GTK2) gtkmm: gtkmm: gtkmm provides a C++ interface to the GTK+ GUI library. gtkmm2 wraps gtkmm: GTK+ 2. Highlights include typesafe callbacks, widgets extensible via gtkmm: inheritance and a comprehensive set of widget classes that can be gtkmm: freely combined to quickly create complex user interfaces. gtkmm: gtkmm: http://gtkmm.sourceforge.net/ gtkmm: gtkmm: gtkmm: Packager: vl70@vector.linux.net on 26-Mar-2011 PACKAGE NAME: gtkspell-2.0.16-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 34 K PACKAGE SIZE (uncompressed): 240 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gtkspell: gtkspell (GTK2 spell checker interface library) gtkspell: gtkspell: GtkSpell provides MSWord/MacOSX-style highlighting of misspelled words gtkspell: in a GtkTextView widget. Right-clicking a misspelled word pops up a gtkspell: menu of suggested replacements. gtkspell: gtkspell: gtkspell: gtkspell: gtkspell: gtkspell: PACKAGE NAME: gvfs-1.6.6-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 832 K PACKAGE SIZE (uncompressed): 5520 K PACKAGE REQUIRED: avahi >= 0.6.24,bluez >= 4.34,dbus-glib >= 0.80,expat >= 2.0.1,fuse >= 2.7.4,gconf >= 2.26.0,gnome-keyring >= 2.26.1,glib2 >= 2.20.1,libarchive >= 2.6.2,libcdio >= 0.81,libgphoto2 >= 2.4.3,libimobiledevice >= 1.0.2,libsoup >= 2.26.1,samba >= 3.2.10,udev >= 146 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gvfs|-----handy-ruler------------------------------------------------------| gvfs: gvfs (Backends for the gio framework in GLib) gvfs: gvfs: The gvfs package provides backend implementations for the gio gvfs: framework in GLib. It includes ftp, sftp, cifs. gvfs: gvfs: http://www.gtk.org gvfs: gvfs: gvfs: Packager: vl70@vector.linux.net on 25-Mar-2011 gvfs: gvfs: PACKAGE NAME: hal-0.5.14-x86_64-3.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 487 K PACKAGE SIZE (uncompressed): 2650 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: hal: hal (The HAL Hardware Abstraction Layer) hal: hal: HAL is a piece of software that provides a view of the various hal: hardware attached to a system. HAL keeps detailed metadata for each hal: piece of hardware and provides hooks so that system and desktop hal: software can react to changes in the hardware configuration (such as hal: the insertion of a DVD, or a USB flash memory stick). hal: hal: For more info, see: http://hal.freedesktop.org/ hal: hal: PACKAGE NAME: hal-info-20091130-noarch-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 46 K PACKAGE SIZE (uncompressed): 400 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: hal-info: hal-info (device information for HAL) hal-info: hal-info: The hal-info package contains device information for HAL, a Hardware hal-info: Abstraction Layer. hal-info: hal-info: For more info, see: http://www.freedesktop.org/Software/hal hal-info: hal-info: hal-info: hal-info: hal-info: PACKAGE NAME: hicolor-icon-theme-0.12-noarch-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 11 K PACKAGE SIZE (uncompressed): 230 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: hicolor-icon-theme: hicolor-icon-theme (default icon theme) hicolor-icon-theme: hicolor-icon-theme: This is the default fallback theme used by implementations of the icon hicolor-icon-theme: theme specification. hicolor-icon-theme: hicolor-icon-theme: The specification is available at: hicolor-icon-theme: http://www.freedesktop.org/standards/icon-theme-spec/ hicolor-icon-theme: hicolor-icon-theme: hicolor-icon-theme: hicolor-icon-theme: PACKAGE NAME: hunspell-1.2.9-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 229 K PACKAGE SIZE (uncompressed): 790 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: hunspell: hunspell (spell checker and morphological analyzer library) hunspell: hunspell: Hunspell is a spell checker and morphological analyzer library hunspell: and program designed for languages with rich morphology hunspell: and complex word compounding or character encoding. hunspell: Hunspell interfaces: Ispell-like terminal interface using Curses hunspell: library, Ispell pipe interface, OpenOffice.org UNO module. hunspell: hunspell: hunspell: Home page: http://hunspell.sourceforge.net/ hunspell: PACKAGE NAME: hyphen-2.7-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 59 K PACKAGE SIZE (uncompressed): 190 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: hyphen: hyphen (A text hyphenation library) hyphen: hyphen: Hyphen is a library for high quality hyphenation and justification. hyphen: hyphen: http://hunspell.sf.net hyphen: hyphen: hyphen: Packager: vl70@vector.linux.net on 26-Mar-2011 hyphen: hyphen: hyphen: PACKAGE NAME: icu4c-4.7.1-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 4507 K PACKAGE SIZE (uncompressed): 22870 K PACKAGE REQUIRED: cxxlibs >= 6.0.14 | gcc-g++ >= 4.5.2,gcc >= 4.5.2,glibc-solibs >= 2.13 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: icu4c: icu4c (International Components for Unicode) icu4c: icu4c: The International Components for Unicode (ICU) libraries provide icu4c: robust and full-featured Unicode services on a wide variety of icu4c: platforms. icu4c: icu4c: icu4c: License: GPL icu4c: Authors: icu4c: Website: http://www.icu-project.org/ PACKAGE NAME: id3lib-3.8.3-x86_64-5vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 504 K PACKAGE SIZE (uncompressed): 1480 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: id3lib: id3lib (Library for manipulating ID3v1 and ID3v2 tags) id3lib: id3lib: This package provides a software library for manipulating ID3v1 and id3lib: ID3v2 tags. It provides a convenient interface for software id3lib: developers to include standards-compliant ID3v1/2 tagging id3lib: capabilities in their applications. Features include identification id3lib: of valid tags, automatic size conversions, (re)synchronisation of id3lib: tag frames, seamless tag (de)compression, and optional padding id3lib: facilities. Additionally, it can tell mp3 header info, like bitrate id3lib: etc. http://id3lib.sourceforge.net/ id3lib: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: ilmbase-1.0.2-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 100 K PACKAGE SIZE (uncompressed): 950 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: ilmbase: ilmbase (Industrial Light & Magic base libraries) ilmbase: ilmbase: ilmbase currently includes: ilmbase: ilmbase: IlmThread - a thread abstraction library ilmbase: Imath - a math function library ilmbase: Iex - an excpetion-handling library ilmbase: Half - Ilm's 16 bit floating point format library ilmbase: ilmbase: Homepage: http://www.openexr.org/ ilmbase: PACKAGE NAME: imlib-1.9.15-x86_64-7.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 456 K PACKAGE SIZE (uncompressed): 1560 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: imlib: imlib (image loading and rendering library) imlib: imlib: Imlib is a display depth-independent image loading and rendering imlib: library. Imlib is designed to simplify and speed up the process of imlib: loading images and obtaining X Window System drawables. Imlib imlib: provides many simple manipulation routines which can be used for imlib: common operations. imlib: imlib: imlib: imlib: PACKAGE NAME: imlib2-1.4.4-x86_64-2vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 198 K PACKAGE SIZE (uncompressed): 770 K PACKAGE REQUIRED: bzip2 >= 1.0.5,freetype >= 2.3.7,libid3tag >= 0.15.1b,libpng >= 1.4.0,libjpeg >= 8,libtiff >= 3.9.2,giflib >= 4.1.6,libX11 >= 1.1.99.2,libXext >= 1.0.4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: imlib2: imlib2 (Image loading, saving, rendering, and manipulation library) imlib2: imlib2: Imlib 2 is a library that does image file loading and saving as well imlib2: as rendering, manipulation, arbitrary polygon support, etc. It does imlib2: ALL of these operations FAST. Imlib2 also tries to be highly imlib2: intelligent about doing them, so writing naive programs can be done imlib2: easily, without sacrificing speed. This is a complete rewrite over imlib2: the Imlib 1.x series. The architecture is more modular, simple, and imlib2: flexible. imlib2: http://www.enlightenment.org/Libraries/Imlib2/ imlib2: Packager: vl70@vector.linux.net on 26-Mar-2011 PACKAGE NAME: iso-codes-3.24.2-noarch-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 1679 K PACKAGE SIZE (uncompressed): 12490 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: iso-codes: iso-codes (ISO-standard lists) iso-codes: iso-codes: This package provides lists of various ISO standards (e.g. iso-codes: country, language, language scripts, and currency names) in one iso-codes: place, rather than repeated in many programs throughout the system. iso-codes: iso-codes: Homepage: http://pkg-isocodes.alioth.debian.org/ iso-codes: iso-codes: iso-codes: iso-codes: PACKAGE NAME: jasper-1.900.1-x86_64-3.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 154 K PACKAGE SIZE (uncompressed): 560 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: jasper: jasper (free implementation of the JPEG-2000 standard) jasper: jasper: The JasPer Project is an open-source initiative to provide a free jasper: software-based reference implementation of the codec specified in the jasper: JPEG-2000 Part-1 standard (i.e., ISO/IEC 15444-1).jasper: jasper: jasper: jasper: jasper: jasper home: http://www.ece.uvic.ca/~mdadams/jasper/ jasper: PACKAGE NAME: jre-6u24-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 19434 K PACKAGE SIZE (uncompressed): 88360 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: jre: Java(TM) 2 Platform Standard Edition Runtime Environment. jre: jre: The J2SE(TM) Runtime Environment (JRE) is intended for software jre: developers and vendors to redistribute with their applications. jre: It contains the Java virtual machine, runtime class libraries, and jre: Java application launcher that are necessary to run programs written jre: in the Java programming language. jre: jre: If you need development tools, obtain the jdk from /extra, or see the jre: web page: http://java.com/ jre: PACKAGE NAME: ladspa-1.13-x86_64-2vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 40 K PACKAGE SIZE (uncompressed): 170 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: ladspa: ladspa (LADSPA SDK, example plug-ins and tools) ladspa: ladspa: There is a large number of synthesis packages in use or development ladspa: on the Linux platform at this time. The Linux Audio Developer's ladspa: Simple Plugin API (LADSPA) attempts to give programmers the ability ladspa: to write simple `plugin' audio processors in C/C++ and link them ladspa: dynamically against a range of host applications. ladspa: ladspa: http://www.ladspa.org/ ladspa: ladspa: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: lame-3.98.4-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 335 K PACKAGE SIZE (uncompressed): 1240 K PACKAGE REQUIRED: ncurses >= 5.7 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: lame: LAME (LAME Ain't an MP3 Encoder) lame: lame: LAME is an LGPL MP3 encoder. The open source development model lame: allowed the authors to improve its quality and speed since 1999. lame: It is now a highly evolved MP3 encoder, with quality and speed lame: able to rival state-of-the-art commercial encoders. lame: lame: Homepage: http://sourceforge.net/projects/lame lame: lame: lame: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: lcms-1.19-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 174 K PACKAGE SIZE (uncompressed): 670 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: lcms: lcms (little cms engine) lcms: lcms: Little cms is a small, speed optimized color management engine. lcms: lcms: lcms was written by Marti Maria . lcms: lcms: lcms: lcms: lcms: lcms: PACKAGE NAME: libao-1.1.0-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 50 K PACKAGE SIZE (uncompressed): 260 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libao: libao (Audio Output library) libao: libao: Libao is a cross-platform audio library, and is required by many libao: programs and other libraries that use audio (some examples include libao: ogg123, GAIM, and the Ogg Vorbis libraries). This package provides libao: plugins for OSS, ESD, aRts, and ALSA. You will need to install the libao: supporting libraries for any plugins you want to use. libao: libao: libao: libao: PACKAGE NAME: libarchive-2.8.4-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 227 K PACKAGE SIZE (uncompressed): 560 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libarchive: libarchive (archive reading library) libarchive: libarchive: Libarchive is a programming library that can create and read libarchive: several different streaming archive formats, including most libarchive: popular TAR variants and several CPIO formats. It can also libarchive: write SHAR archives. libarchive: libarchive: Homepage: http://libarchive.googlecode.com libarchive: libarchive: libarchive: PACKAGE NAME: libart_lgpl-2.3.21-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 75 K PACKAGE SIZE (uncompressed): 430 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libart_lgpl: libart_lgpl (graphics library) libart_lgpl: libart_lgpl: Libart is a library for high-performance 2D graphics. It is used by libart_lgpl: both KDE and GNOME. This is the LGPL'd component of the library. libart_lgpl: libart_lgpl: Raph Levien is the author of libart. libart_lgpl: libart_lgpl: libart_lgpl: libart_lgpl: libart_lgpl: PACKAGE NAME: libatasmart-0.17-x86_64-2vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 38 K PACKAGE SIZE (uncompressed): 170 K PACKAGE REQUIRED: udev >= 141 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libatasmart: libatasmart (ATA S.M.A.R.T. Disk Health Monitoring Library) libatasmart: libatasmart: A small and lightweight parser library for ATA S.M.A.R.T. hard disk libatasmart: health monitoring. libatasmart: libatasmart: http://git.0pointer.de/?p=libatasmart.git;a=summary libatasmart: libatasmart: libatasmart: Packager: vl70@vector.linux.net on 26-Mar-2011 libatasmart: libatasmart: PACKAGE NAME: libavc1394-0.5.3-x86_64-6vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 40 K PACKAGE SIZE (uncompressed): 170 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: PACKAGE NAME: libbonobo-2.24.3-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 789 K PACKAGE SIZE (uncompressed): 4790 K PACKAGE REQUIRED: dbus-glib >= 0.80,libxml2 >= 2.7.3,orbit2 >= 2.14.17 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libbonobo: libbonobo (Bonobo component system) libbonobo: libbonobo: Bonobo is a component system based on CORBA, used by the GNOME libbonobo: desktop. libbonobo: libbonobo: http://ftp.gnome.org libbonobo: libbonobo: libbonobo: Packager: vl70@vector.linux.net on 17-Feb-2011 libbonobo: libbonobo: PACKAGE NAME: libbonoboui-2.24.3-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 461 K PACKAGE SIZE (uncompressed): 2830 K PACKAGE REQUIRED: glib2 >= 2.18.4,libart_lgpl >= 2.3.19,libbonobo >= 2.24.1,libglade >= 2.6.3,libgnome >= 2.24.1,libgnomecanvas >= 2.24.0,libxml2 >= 2.7.3,orbit2 >= 2.14.14 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libbonoboui: libbonoboui (Bonobo user interface components) libbonoboui: libbonoboui: Bonobo is a component system based on CORBA, used by the GNOME libbonoboui: desktop. libbonoboui contains the user interface related components libbonoboui: that come with Bonobo. libbonoboui: libbonoboui: http://ftp.gnome.org libbonoboui: libbonoboui: libbonoboui: Packager: vl70@vector.linux.net on 17-Feb-2011 libbonoboui: PACKAGE NAME: libburn-1.0.0.pl00-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 262 K PACKAGE SIZE (uncompressed): 1940 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libburn: libburn (Library for reading, mastering and writing optical discs) libburn: libburn: Libburn is an open-source library for reading, mastering and writing libburn: optical discs. For now this means only CD-R and CD-RW. libburn: The project comprises of several more or less interdependent parts libburn: which together strive to be a usable foundation for application libburn: development. These are libraries, language bindings, and middleware libburn: binaries which emulate classical (and valuable) Linux tools. libburn: libburn: http://libburnia.pykix.org/ libburn: Packager: vl70@vector.linux.net on 26-Mar-2011 PACKAGE NAME: libcaca-0.99.beta16-x86_64-3.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 422 K PACKAGE SIZE (uncompressed): 3100 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libcaca: libcaca (Colour AsCii Art library) libcaca: libcaca: The libcaca library is a graphics library that outputs text instead libcaca: of pixels, so that it can work on older video cards or text terminals. libcaca: It is not unlike the famous AAlib library. libcaca: libcaca: Sam Hocevar is the main author of libcaca. libcaca: libcaca: libcaca: libcaca: PACKAGE NAME: libcanberra-0.25-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 81 K PACKAGE SIZE (uncompressed): 430 K PACKAGE REQUIRED: alsa-lib >= 1.0.19,gconf >= 2.24.0,gstreamer >= 0.10.22,gtk+2 >= 2.14.7,libvorbis >= 1.2.0,pulseaudio >= 0.9.13,sound-theme-freedesktop PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libcanberra|-----handy-ruler------------------------------------------------------| libcanberra: libcanberra (Portable Sound Event Library) libcanberra: libcanberra: A small and lightweight implementation of the XDG Sound Theme libcanberra: Specification (http://0pointer.de/public/sound-theme-spec.html). libcanberra: libcanberra: http://git.0pointer.de/?p=libcanberra.git;a=summary libcanberra: libcanberra: libcanberra: Packager: vl70@vector.linux.net on 14-Feb-2011 libcanberra: libcanberra: PACKAGE NAME: libcap-2.20-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 51 K PACKAGE SIZE (uncompressed): 200 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libcap: libcap (get/set POSIX capabilities) libcap: libcap: This is a library for getting and setting POSIX.1e (formerly POSIX 6) libcap: draft 15 capabilities. libcap: libcap: Libcap was written by Andrew G. Morgan; however, it would not libcap: have been possible without the help of Aleph1, Roland Buresund, libcap: Andrew Main, and Alexander Kjeldaas. libcap: libcap: libcap: PACKAGE NAME: libcdaudio-0.99.12p2-x86_64-3vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 46 K PACKAGE SIZE (uncompressed): 160 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libcdaudio: libcdaudio (Control operation of a CD-ROM when playing audio CDs) libcdaudio: libcdaudio: libcdaudio is a library designed to provide functions to control libcdaudio: operation of a CD-ROM when playing audio CDs. It also contains libcdaudio: functions for CDDB and CD Index lookup. libcdaudio: libcdaudio: http://libcdaudio.sourceforge.net/ libcdaudio: libcdaudio: libcdaudio: Packager: vl70@vector.linux.net on 14-Feb-2011 libcdaudio: PACKAGE NAME: libcddb-1.3.2-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 67 K PACKAGE SIZE (uncompressed): 320 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libcddb: libcddb (An online CD database library) libcddb: libcddb: Libcddb is a library that implements the different protocols (CDDBP, libcddb: HTTP, SMTP) to access data on a CDDB server (http://freedb.org). libcddb: libcddb: Visit the project at: http://libcddb.sourceforge.net/ libcddb: libcddb: libcddb: libcddb: libcddb: PACKAGE NAME: libcdio-0.79-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 274 K PACKAGE SIZE (uncompressed): 1060 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libcdio: libcdio (GNU CD access library) libcdio: libcdio: The libcdio package contains a library for CD-ROM and CD image access. libcdio: Applications wishing to be oblivious of the OS and device-dependent libcdio: properties of a CD-ROM or of the specific details of various CD-image libcdio: formats may benefit from using this library. A library for working libcdio: with ISO-9660 filesystems libiso9660 is included. A generic interface libcdio: for issuing MMC (multimedia commands) is also part of the libcdio libcdio: library. libcdio: libcdio: PACKAGE NAME: libcfg+-0.6.2-x86_64-3vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 77 K PACKAGE SIZE (uncompressed): 500 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libcfg+|-----handy-ruler------------------------------------------------------| libcfg+: libcfg+ (Command line and configuration file parsing library) libcfg+: libcfg+: libcfg+ is a C library that features multi- command line and libcfg+: configuration file parsing. It is possible to set up various special libcfg+: properties such as quoting characters, deliminator strings, file libcfg+: comment prefixes, multi-line postfixes, and more. It supports many libcfg+: data types such as booleans, integers, decimal numbers, strings with libcfg+: many additional data type flags (such as multiple values for a single libcfg+: option). libcfg+: http://platon.sk/projects/main_page.php?project_id=3 libcfg+: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: libdaemon-0.14-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 27 K PACKAGE SIZE (uncompressed): 120 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libdaemon: libdaemon (library for writing UNIX daemons) libdaemon: libdaemon: libdaemon is a lightweight C library which eases the writing of UNIX libdaemon: daemons. libdaemon: libdaemon: http://0pointer.de/lennart/projects/libdaemon/ libdaemon: libdaemon: libdaemon: Packager: root@vector.linux.net on 26-Feb-2011 libdaemon: libdaemon: PACKAGE NAME: libdc1394-2.1.2-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 191 K PACKAGE SIZE (uncompressed): 1480 K PACKAGE REQUIRED: libraw1394 >= 2.02,libusb1 >= 1.0.0 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libdc1394|-----handy-ruler------------------------------------------------------| libdc1394: libdc1394 (1394-based digital camera control library) libdc1394: libdc1394: Libdc1394 is a library that is intended to provide a high level libdc1394: programming interface for application developers who wish to control libdc1394: IEEE 1394 based cameras that conform to the 1394-based Digital Camera libdc1394: Specification. libdc1394: libdc1394: http://sourceforge.net/projects/libdc1394/ libdc1394: libdc1394: libdc1394: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: libdca-0.0.5-x86_64-4vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 106 K PACKAGE SIZE (uncompressed): 280 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libdca: libdca (DTS Coherent Acoustics decoder library) libdca: libdca: libdca is a free library for decoding DTS Coherent Acoustics streams. libdca: It is released under the terms of the GPL license. The DTS Coherent libdca: Acoustics standard is used in a variety of applications, including libdca: DVD, DTS audio CD and radio broadcasting. libdca: libdca: http://developers.videolan.org/libdca.html libdca: libdca: libdca: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: libdv-1.0.0-x86_64-4vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 112 K PACKAGE SIZE (uncompressed): 330 K PACKAGE REQUIRED: gtk+2 >= 2.18.6,libpng >= 1.4.0 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libdv: libdv (Software decoder for DV format video) libdv: libdv: The Quasar DV codec (libdv) is a software codec for DV video, the libdv: encoding format used by most digital camcorders, typically those that libdv: support the IEEE 1394 (a.k.a. FireWire or i.Link) interface. libdv libdv: was developed according to the official standards for DV video: libdv: IEC 61834 and SMPTE 314M. libdv: libdv: http://libdv.sourceforge.net/ libdv: libdv: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: libdvdcss-1.2.10-x86_64-2vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 27 K PACKAGE SIZE (uncompressed): 90 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libdvdcss: libdvdcss (Transparent DVD device access with CSS decryption) libdvdcss: libdvdcss: libdvdcss is a cross-platform library for transparent DVD device libdvdcss: access with on-the-fly CSS decryption. libdvdcss: It is used by libdvdread and most DVD players such as VLC because of libdvdcss: its portability and because, unlike similar libraries, it does not libdvdcss: require your DVD drive to be region locked. libdvdcss: libdvdcss: http://www.videolan.org/developers/libdvdcss.html libdvdcss: libdvdcss: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: libdvdnav-4.1.3-x86_64-2vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 53 K PACKAGE SIZE (uncompressed): 270 K PACKAGE REQUIRED: libdvdread >= 4.1.3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libdvdnav: libdvdnav (A library for reading DVD video discs based on Ogle code) libdvdnav: libdvdnav: libdvdnav provides a simple library for reading DVD video discs. libdvdnav: The code is based on Ogle and used in, among others, the Xine dvdnav libdvdnav: plug-in. libdvdnav: libdvdnav: http://dvd.sourceforge.net/ libdvdnav: libdvdnav: libdvdnav: Packager: vl70@vector.linux.net on 14-Feb-2011 libdvdnav: PACKAGE NAME: libdvdplay-1.0.1-x86_64-2vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 30 K PACKAGE SIZE (uncompressed): 120 K PACKAGE REQUIRED: libdvdread >= 4.1.1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libdvdplay: libdvdplay (A library providing low-level functions for DVD reading) libdvdplay: libdvdplay: libdvdplay is a cross-platform layer over libdvdread that provides libdvdplay: low-level functions for DVD reading and seeking, as well as access to libdvdplay: the DVD data (subtitles, languages, chapters). It also provides the libdvdplay: virtual machine required for DVD navigation to the client application. libdvdplay: libdvdplay: http://developers.videolan.org/libdvdplay/ libdvdplay: libdvdplay: libdvdplay: Packager: vl70@vector.linux.net on 26-Mar-2011 PACKAGE NAME: libdvdread-4.1.3-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 68 K PACKAGE SIZE (uncompressed): 250 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libdvdread: libdvdread (library for reading DVDs) libdvdread: libdvdread: libdvdread provides a simple foundation for reading DVD video libdvdread: disks. It provides the functionality that is required to access libdvdread: many DVDs. It parses IFO files, reads NAV-blocks, and performs libdvdread: CSS authentication and descrambling. libdvdread: libdvdread: libdvdread: libdvdread: libdvdread: PACKAGE NAME: libev-4.04-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 117 K PACKAGE SIZE (uncompressed): 280 K PACKAGE REQUIRED: glibc-solibs >= 2.13 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libev: libev (A full-featured and high-performance event loop) libev: A full-featured and high-performance event loop libev: loosely modelled after . It is used, among others, in the GNU libev: Virtual Private Ethernet and rxvt-unicode packages, and in the libev: Deliantra MORPG Server and Client. libev: libev: libev: libev: License: http://cvs.schmorp.de/libev/LICENSE?revision=1.8&view=markup libev: Authors: Marc Lehmann and Emanuele Giaquinta. libev: Website: http://software.schmorp.de/pkg/libev PACKAGE NAME: libexif-0.6.20-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 299 K PACKAGE SIZE (uncompressed): 1850 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libexif: libexif (Exchangeable Image File Format library) libexif: libexif: EXIF stands for Exchangeable Image File Format, which is a format used libexif: to store extra information in images such as the JPEG files produced libexif: by digital cameras. The libexif library allows programs such as libexif: gthumb to parse, edit, and save EXIF data. libexif: libexif: libexif: libexif: libexif: PACKAGE NAME: libffi-3.0.9-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 58 K PACKAGE SIZE (uncompressed): 240 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libffi|-----handy-ruler------------------------------------------------------| libffi: libffi (A portable foreign function interface library) libffi: libffi: A portable foreign function interface library libffi: libffi: http://sourceware.org/libffi libffi: libffi: libffi: Packager: vl70@vector.linux.net on 14-Feb-2011 libffi: libffi: libffi: PACKAGE NAME: libgee-0.6.0-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 99 K PACKAGE SIZE (uncompressed): 460 K PACKAGE REQUIRED: glib2 >= 2.22.0 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libgee|-----handy-ruler------------------------------------------------------| libgee: libgee (GObject collection library) libgee: libgee: libgee is a collection library providing GObject-based interfaces and libgee: classes for commonly used data structures. libgee: libgee: http://live.gnome.org/Libgee libgee: libgee: libgee: Packager: vl70@vector.linux.net on 14-Feb-2011 libgee: libgee: PACKAGE NAME: libgexiv2-0.2.1-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 50 K PACKAGE SIZE (uncompressed): 220 K PACKAGE REQUIRED: exiv2 >= 0.20 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libgexiv2|-----handy-ruler------------------------------------------------------| libgexiv2: libgexiv2 (Gexiv2 is a GObject-based wrapper around the Exiv2 library) libgexiv2: libgexiv2: libgexiv2 is a GObject-based wrapper around the Exiv2 library. It libgexiv2: makes the basic features of Exiv2 available to GNOME applications. libgexiv2: libgexiv2: http://trac.yorba.org/wiki/gexiv2 libgexiv2: libgexiv2: libgexiv2: Packager: vl70@vector.linux.net on 14-Feb-2011 libgexiv2: libgexiv2: PACKAGE NAME: libgexiv2-0.2.2-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 49 K PACKAGE SIZE (uncompressed): 220 K PACKAGE REQUIRED: exiv2 >= 0.20 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libgexiv2: libgexiv2 (Gexiv2 is a GObject-based wrapper around the Exiv2 library) libgexiv2: libgexiv2: libgexiv2 is a GObject-based wrapper around the Exiv2 library. It libgexiv2: makes the basic features of Exiv2 available to GNOME applications. libgexiv2: libgexiv2: http://trac.yorba.org/wiki/gexiv2 libgexiv2: libgexiv2: libgexiv2: Packager: vl70@vector.linux.net on 26-Mar-2011 libgexiv2: libgexiv2: PACKAGE NAME: libglade-2.6.4-x86_64-4.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 86 K PACKAGE SIZE (uncompressed): 470 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libglade: libglade (GLADE library) libglade: libglade: The GLADE library allows loading user interfaces which are stored libglade: externally into a program. This allows the interface to be changed libglade: without recompiling the program. The interfaces can also be edited libglade: with GLADE. libglade: libglade: libglade: libglade: libglade: PACKAGE NAME: libgnome-2.30.0-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 1269 K PACKAGE SIZE (uncompressed): 6350 K PACKAGE REQUIRED: bluecurve-icon-theme,esound >= 0.2.41,gconf >= 2.26.0,glib2 >= 2.20.0,gnome-vfs >= 2.24.1,libbonobo >= 2.24.1,libxml2 >= 2.7.3,libxslt >= 1.1.24,orbit2 >= 2.14.17 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libgnome: libgnome (GNOME base library) libgnome: libgnome: GNOME (GNU Network Object Model Environment) is a user-friendly set libgnome: of GUI applications and desktop tools to be used in conjunction with libgnome: a window manager for the X Window System. The libgnome package libgnome: includes non-GUI-related libraries that are needed to run GNOME. The libgnome: libgnomeui package contains X11-dependent GNOME library features. libgnome: libgnome: ftp://ftp.gnome.org libgnome: libgnome: Packager: vl70@vector.linux.net on 17-Feb-2011 PACKAGE NAME: libgnome-keyring-2.32.0-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 95 K PACKAGE SIZE (uncompressed): 900 K PACKAGE REQUIRED: dbus >= 1.2.24,glib2 >= 2.24.0,libtasn1 >= 2.5,libgcrypt >= 1.4.5 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libgnome-keyring|-----handy-ruler------------------------------------------------------| libgnome-keyring: libgnome-keyring (Framework for managing passwords and other secrets) libgnome-keyring: libgnome-keyring: gnome-keyring is a program that keep password and other secrets for libgnome-keyring: users. The library libgnome-keyring is used by applications to libgnome-keyring: integrate with the gnome-keyring system. libgnome-keyring: libgnome-keyring: http://live.gnome.org/GnomeKeyring libgnome-keyring: libgnome-keyring: libgnome-keyring: Packager: vl70@vector.linux.net on 25-Feb-2011 libgnome-keyring: PACKAGE NAME: libgnomecanvas-2.30.1-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 237 K PACKAGE SIZE (uncompressed): 1800 K PACKAGE REQUIRED: glib2 >= 2.20.0,gtk+2 >= 2.16.0,libart_lgpl >= 2.3.19,libglade >= 2.6.3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libgnomecanvas: libgnomecanvas (GnomeCanvas widget) libgnomecanvas: libgnomecanvas: The canvas widget allows you to create custom displays using stock libgnomecanvas: items such as circles, lines, text, and so on. It was originally a libgnomecanvas: port of the Tk canvas widget but has evolved quite a bit over time. libgnomecanvas: libgnomecanvas: http://www.gnome.org/ libgnomecanvas: libgnomecanvas: libgnomecanvas: Packager: vl70@vector.linux.net on 14-Feb-2011 libgnomecanvas: PACKAGE NAME: libgnomeui-2.24.3-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 858 K PACKAGE SIZE (uncompressed): 6680 K PACKAGE REQUIRED: gconf >= 2.24.0,glib2 >= 2.18.4,gnome-vfs >= 2.24.0,gvfs >= 1.0.3,libart_lgpl >= 2.3.19,libbonobo >= 2.24.1,libbonoboui >= 2.24.1,libglade >= 2.6.3,libgnome-keyring >= 2.30.0,libgnome >= 2.24.1,libgnomecanvas >= 2.24.0,libxml2 >= 2.7.3,pango >= 1.22.4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libgnomeui: libgnomeui (GNOME base GUI library) libgnomeui: libgnomeui: GNOME (GNU Network Object Model Environment) is a user-friendly set libgnomeui: of GUI applications and desktop tools to be used in conjunction with libgnomeui: a window manager for the X Window System. The libgnomeui package libgnomeui: includes GUI-related libraries that are needed to run GNOME. (The libgnomeui: libgnome package includes the library features that do not use the X libgnomeui: Window System.) libgnomeui: libgnomeui: ftp://ftp.gnome.org libgnomeui: Packager: vl70@vector.linux.net on 17-Feb-2011 PACKAGE NAME: libgphoto2-2.4.10.1-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 1036 K PACKAGE SIZE (uncompressed): 6360 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libgphoto2: libgphoto2 (Digital Camera Library) libgphoto2: libgphoto2: libgphoto2 is a library that can be used by libgphoto2: applications to access various digital cameras. libgphoto2: libgphoto2: Homepage: http://www.gphoto.org/ libgphoto2: libgphoto2: libgphoto2: libgphoto2: libgphoto2: PACKAGE NAME: libgpod-0.8.0-x86_64-2.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 288 K PACKAGE SIZE (uncompressed): 1570 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libgpod: libgpod (A library for connecting to some sort of media device ;-) libgpod: libgpod: libgpod for accessing iPod content. It provides an easy to use way libgpod: to retrieve the list of files and playlist stored on an iPod, to libgpod: modify them and to save them back to the iPod. libgpod: libgpod: If you decide to make improvements please contact us so we can work libgpod: together. Just drop a mail to: Gtkpod-devel@lists.sourceforge.net libgpod: (you may ask to be CC in the answer). libgpod: libgpod: PACKAGE NAME: libgsf-1.14.19-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 221 K PACKAGE SIZE (uncompressed): 1960 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libgsf: libgsf (structured file I/O library) libgsf: libgsf: libgsf aims to provide an efficient extensible I/O abstraction for libgsf: dealing with different structured file formats. libgsf: libgsf: libgsf is used by libwv2, which is used by various word processors libgsf: to import .doc format files. libgsf: libgsf: libgsf: libgsf: PACKAGE NAME: libgtop-2.28.1-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 188 K PACKAGE SIZE (uncompressed): 1620 K PACKAGE REQUIRED: glib2 >= 2.26.1-x86_64-2,glibc-solibs >= 2.13-x86_64-1,libXau >= 1.0.6-x86_64-1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libgtop: libgtop (System Information Library) libgtop: libgtop: libgtop is a library that fetches information about the running system libgtop: such as cpu and memory usage, active processes etc. The information is libgtop: taken directly from the /proc filesystem. libgtop: libgtop: libgtop: License: GPL libgtop: Authors: libgtop: Website: gnome.org PACKAGE NAME: libid3tag-0.15.1b-x86_64-4.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 35 K PACKAGE SIZE (uncompressed): 160 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libid3tag: libid3tag (ID3 tag manipulation library) libid3tag: libid3tag: libid3tag is a library for reading and (eventually) writing ID3 tags, libid3tag: both ID3v1 and the various versions of ID3v2. libid3tag: libid3tag: libid3tag was written by Robert Leslie. libid3tag: libid3tag: libid3tag: libid3tag: libid3tag: PACKAGE NAME: libidl-0.8.14-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 86 K PACKAGE SIZE (uncompressed): 290 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libidl: libIDL (IDL library) libidl: libidl: libIDL is a library licensed under the GNU LGPL for creating trees of libidl: CORBA Interface Definition Language (IDL) files, which is a libidl: specification for defining portable interfaces. libidl: libidl: libIDL is used by SeaMonkey and the Mozilla Suite. libidl: libidl: libidl: libidl: PACKAGE NAME: libidn-1.19-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 282 K PACKAGE SIZE (uncompressed): 1330 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libidn: libidn (GNU Internationalized Domain Name library) libidn: libidn: GNU Libidn is an implementation of the Stringprep, Punycode and IDNA libidn: specifications defined by the IETF Internationalized Domain Names libidn: (IDN) working group, used for internationalized domain names. libidn: libidn: libidn: libidn: libidn: libidn: PACKAGE NAME: libieee1284-0.2.11-x86_64-2vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 74 K PACKAGE SIZE (uncompressed): 340 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libieee1284: libieee1284 (parallel port library) libieee1284: libieee1284: This library is intended to be used by applications that need to libieee1284: communicate with (or at least identify) devices that are attached via libieee1284: a parallel port. For example, SANE uses it to identify scanners. libieee1284: libieee1284: libieee1284: libieee1284: libieee1284: libieee1284: PACKAGE NAME: libisofs-1.0.0-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 283 K PACKAGE SIZE (uncompressed): 2460 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libisofs: libisofs (Library to create ISO 9660 disk images) libisofs: libisofs: Libisofs is a library to pack up hard disk files and directories into libisofs: a ISO 9660 disk image. This may then be burned to CD via libburn. libisofs: libisofs: http://libburnia.pykix.org/ libisofs: libisofs: libisofs: Packager: vl70@vector.linux.net on 26-Mar-2011 libisofs: libisofs: PACKAGE NAME: libjpeg-8a-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 184 K PACKAGE SIZE (uncompressed): 820 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libjpeg: libjpeg (Independent JPEG Group's JPEG software) libjpeg: libjpeg: Software to implement JPEG image compression and decompression. JPEG libjpeg: (pronounced 'jay-peg') is a standardized compression method for libjpeg: full-color and gray-scale images. JPEG is intended for compressing libjpeg: 'real-world' scenes; cartoons and other non-realistic images are not libjpeg: its strong suit. JPEG is lossy, however, on typical images of libjpeg: real-world scenes, very good compression levels can be obtained with libjpeg: no visible change, and amazingly high compression levels are possible libjpeg: if you can tolerate a low-quality image. libjpeg: http://www.ijg.org/ PACKAGE NAME: liblastfm-0.3.3_f0b3239-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 146 K PACKAGE SIZE (uncompressed): 700 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: liblastfm: liblastfm (last fm library) liblastfm: liblastfm: The last.fm audio scrobbling service library. liblastfm: liblastfm: liblastfm: liblastfm: liblastfm: liblastfm: liblastfm: liblastfm: PACKAGE NAME: libmad-0.15.1b-x86_64-3.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 69 K PACKAGE SIZE (uncompressed): 220 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libmad: libmad (high-quality MPEG audio library) libmad: libmad: MAD (libmad) is a high-quality MPEG audio decoder. It currently libmad: supports MPEG-1 and the MPEG-2 extension to Lower Sampling libmad: Frequencies, as well as the so-called MPEG 2.5 format. All three libmad: audio layers (Layer I, Layer II, and Layer III a.k.a. MP3) are libmad: fully implemented. Because MAD provides full 24-bit PCM output, libmad: applications using MAD are able to produce high quality audio. libmad: MAD is distributed under the terms of the GPL. libmad: libmad: MAD (libmad) was written by Robert Leslie. PACKAGE NAME: libmcs-0.7.2-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 15 K PACKAGE SIZE (uncompressed): 90 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libmcs: libmcs (A library for managing configuration settings) libmcs: libmcs: mcs is a library and set of userland tools which abstract the libmcs: storage of configuration settings away from userland applications. libmcs: libmcs: It is hoped that by using mcs, that the applications which use it libmcs: will generally have a more congruent feeling in regards to settings. libmcs: libmcs: Because mcs is licenced under the BSD license, it is hoped that libmcs: many applications will adopt its use. libmcs: PACKAGE NAME: libmikmod-3.2.0.beta2-x86_64-3vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 162 K PACKAGE SIZE (uncompressed): 460 K PACKAGE REQUIRED: esound >= 0.2.38 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libmikmod|-----handy-ruler------------------------------------------------------| libmikmod: libmikmod (A MOD music file player library) libmikmod: libmikmod: libmikmod is a library used by the mikmod MOD music file player for libmikmod: UNIX-like systems. Supported file formats include MOD, STM, S3M, MTM, libmikmod: XM, ULT and IT. libmikmod: libmikmod: http://mikmod.raphnet.net/ libmikmod: libmikmod: libmikmod: Packager: vl70@vector.linux.net on 14-Feb-2011 libmikmod: PACKAGE NAME: libmms-0.6-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 41 K PACKAGE SIZE (uncompressed): 150 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libmms: libmms (Library for Microsoft Media Server (MMS) streaming protocol) libmms: libmms: MMS is a proprietary streaming protocol used in Microsoft server libmms: products, commonly used to stream WMV data. You can encounter libmms: mms:// style URLs all over the net, especially on news sites and libmms: other content-serving sites. Libmms allows you to download content libmms: from such sites, making it easy to add MMS support to your media libmms: applications. libmms: http://libmms.sourceforge.net/ libmms: libmms: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: libmng-1.0.10-x86_64-2.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 206 K PACKAGE SIZE (uncompressed): 840 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libmng: libmng (Multiple-image Network Graphics library) libmng: libmng: This is libmng, the MNG reference library. MNG (pronounced 'ming'), libmng: is short for Multiple-image Network Graphics. Designed with the same libmng: modular philosophy as PNG and by many of the same people, MNG is libmng: intended to provide a home for all of the multi-image (animation) libmng: capabilities that have no place in PNG. libmng: libmng: libmng was written by Gerard Juyn. libmng: libmng: PACKAGE NAME: libmodman-2.0.1-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 26 K PACKAGE SIZE (uncompressed): 100 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libmodman|-----handy-ruler------------------------------------------------------| libmodman: libmodman (A simple library for managing C++ modules (plug-ins)) libmodman: libmodman: libmodman is a simple library for managing C++ modules (plug-ins). libmodman: libmodman: http://code.google.com/p/libmodman/ libmodman: libmodman: libmodman: Packager: vl70@vector.linux.net on 14-Feb-2011 libmodman: libmodman: libmodman: PACKAGE NAME: libmowgli-0.7.1-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 31 K PACKAGE SIZE (uncompressed): 180 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libmowgli: libmowgli (A useful collection of routines for programming) libmowgli: libmowgli: libmowgli is a class library containing performance and usability libmowgli: oriented extensions to C. libmowgli: libmowgli: libmowgli was written by Patrick McFarland, William Pitcock, libmowgli: Jonathan Schleifer, Pippijn van Steenhoven, and Jilles Tjoelker. libmowgli: libmowgli: libmowgli: libmowgli: PACKAGE NAME: libmp4v2-1.9.1-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 383 K PACKAGE SIZE (uncompressed): 1460 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libmp4v2: libmp4v2 (Lib for working with files using the mp4 container format) libmp4v2: libmp4v2: The libmp4v2 library provides an abstraction layer for working with libmp4v2: files using the mp4 container format. This library is developed by libmp4v2: mpeg4ip project and is an exact copy of the library distributed in libmp4v2: the mpeg4ip package. libmp4v2: libmp4v2: http://code.google.com/p/mp4v2 libmp4v2: libmp4v2: libmp4v2: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: libmpc-0.8.2-x86_64-2.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 68 K PACKAGE SIZE (uncompressed): 360 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libmpc: libmpc (Multiple Precision Complex Library) libmpc: libmpc: mpc is a complex floating-point library with exact rounding. It is libmpc: based on the GNU MPFR floating-point library (http://www.mpfr.org/), libmpc: which is itself based on the GNU MP library (http://gmplib.org/). libmpc: libmpc: Homepage: http://www.multiprecision.org libmpc: libmpc: libmpc: libmpc: PACKAGE NAME: libmpcdec-1.2.6-x86_64-5vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 25 K PACKAGE SIZE (uncompressed): 120 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libmpcdec: libmpcdec (Portable Musepack SV7 decoder library) libmpcdec: libmpcdec: Musepack is an audio compression format with a strong emphasis on libmpcdec: high quality. It's not lossless, but it is designed for transparency, libmpcdec: so that you won't be able to hear differences between the original libmpcdec: wave file and the much smaller MPC file. libmpcdec: libmpcdec has replaced the older libmusepack. libmpcdec: libmpcdec: Homepage: http://www.musepack.net/ libmpcdec: libmpcdec: Packager: vl70@vector.linux.net on 22-Feb-2011 PACKAGE NAME: libmpeg2-0.5.1-x86_64-3vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 89 K PACKAGE SIZE (uncompressed): 330 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libmpeg2: libmpeg2 (MPEG-2 decoder library and program) libmpeg2: libmpeg2: libmpeg2 is a free library for decoding MPEG-2 and MPEG-1 video libmpeg2: streams. It is released under the terms of the GPL license. libmpeg2: libmpeg2: http://libmpeg2.sourceforge.net/ libmpeg2: libmpeg2: libmpeg2: Packager: vl70@vector.linux.net on 14-Feb-2011 libmpeg2: libmpeg2: PACKAGE NAME: libmtp-1.0.1-x86_64-2.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 238 K PACKAGE SIZE (uncompressed): 2710 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libmtp: libmtp (A library for MTP media devices) libmtp: libmtp: libmtp is a library that attempts to support Microsoft's Media libmtp: Transfer Protocol (MTP). It was initially based on the great libptp2 libmtp: library by Mariusz Woloszyn now maintained by Marcus Meissners, and libmtp: Hubert Figuere's libgphoto2 work based on libptp2 (or is libptp2 libmtp: based on libgphoto?). It is like a master DJ has remixed all of libmtp: these tracks and then added a new API adapted for portable media libmtp: players. :-) libmtp: libmtp: For the latest info, check out: http://libmtp.sourceforge.net PACKAGE NAME: libmusicbrainz-2.1.5-x86_64-2vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 87 K PACKAGE SIZE (uncompressed): 310 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libmusicbrainz|-----handy-ruler------------------------------------------------------| libmusicbrainz: libmusicbrainz (Library for accessing MusicBrainz servers) libmusicbrainz: libmusicbrainz: The MusicBrainz client library allows applications to make metadata libmusicbrainz: lookup to a MusicBrainz server, generate signatures from WAV data and libmusicbrainz: create CD Index Disk ids from audio CD roms. libmusicbrainz: libmusicbrainz: http://www.musicbrainz.org/ libmusicbrainz: libmusicbrainz: libmusicbrainz: Packager: vl70@vector.linux.net on 14-Feb-2011 libmusicbrainz: PACKAGE NAME: libnice-0.1.0-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 162 K PACKAGE SIZE (uncompressed): 1210 K PACKAGE REQUIRED: gstreamer >= 0.10.24,gstreamer-plugins-base >= 0.10.24,gupnp-igd >= 0.1.3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libnice: libnice (GLib ICE implementation) libnice: libnice: libnice is an implementation of the IETF's draft Interactive libnice: Connectivity Establishment standard (ICE). libnice: libnice: http://nice.freedesktop.org/wiki/ libnice: libnice: libnice: Packager: vl70@vector.linux.net on 26-Mar-2011 libnice: libnice: PACKAGE NAME: libnl-1.1-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 116 K PACKAGE SIZE (uncompressed): 500 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libnl: libnl (netlink socket library) libnl: libnl: libnl is a library for applications dealing with netlink sockets. libnl: The library provides an interface for raw netlink messaging and libnl: various netlink family specific interfaces. libnl: libnl: Homepage: http://people.suug.ch/~tgr/libnl/ libnl: libnl: libnl: libnl: PACKAGE NAME: libnotify-0.5.2-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 43 K PACKAGE SIZE (uncompressed): 250 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libnotify: libnotify (notification library) libnotify: libnotify: A general library for event notification libnotify: libnotify: Homepage: http://www.galago-project.org/news/index.php libnotify: libnotify: libnotify: libnotify: libnotify: libnotify: PACKAGE NAME: libnut-20110213-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 56 K PACKAGE SIZE (uncompressed): 170 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libnut|-----handy-ruler------------------------------------------------------| libnut: libnut (Library and tools to create NUT multimedia files) libnut: libnut: NUT is a free multimedia container format for storage of audio, video, libnut: subtitles and related user defined streams, it provides exact libnut: timestamps for synchronization and seeking, is simple, has low libnut: overhead and can recover in case of errors in the stream. libnut: libnut: http://svn.mplayerhq.hu/nut/ libnut: libnut: libnut: Packager: root@vector.linux.net on 13-Feb-2011 PACKAGE NAME: libogg-1.2.2-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 70 K PACKAGE SIZE (uncompressed): 400 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libogg: libogg (Ogg Bitstream library) libogg: libogg: Libogg is a library for manipulating ogg bitstreams. It handles libogg: both making ogg bitstreams and getting packets from ogg bitstreams. libogg: libogg: libogg is needed to use the Ogg Vorbis audio format. libogg: libogg: libogg: libogg: libogg: PACKAGE NAME: liboil-0.3.17-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 158 K PACKAGE SIZE (uncompressed): 1690 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: liboil: liboil (a library of simple functions) liboil: liboil: Liboil is a library of simple functions that are optimized for liboil: various CPUs. These functions are generally loops implementing liboil: simple algorithms, such as converting an array of N integers to liboil: floating-point numbers or multiplying and summing an array of N liboil: numbers. Such functions are candidates for significant optimization liboil: using various techniques, especially by using extended instructions liboil: provided by modern CPUs (Altivec, MMX, SSE, etc.). liboil: liboil: PACKAGE NAME: libpcap-1.1.1-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 233 K PACKAGE SIZE (uncompressed): 950 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libpcap: libpcap (packet capture library) libpcap: libpcap: libpcap is a library for user-level packet capture. libpcap provides libpcap: a portable framework for low-level network monitoring. Applications libpcap: include network statistics collection, security monitoring, network libpcap: debugging, etc. The tcpdump utility uses libpcap. libpcap: libpcap: Project homepage: http://sourceforge.net/projects/libpcap/ libpcap: libpcap: libpcap: PACKAGE NAME: libplist-1.3-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 97 K PACKAGE SIZE (uncompressed): 470 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libplist: libplist (A library for Apple Binary and XML Property Lists) libplist: libplist: libplist is a library that attempts to support Apple Binary and XML libplist: Property Lists. It is used by libgpod. libplist: libplist: The libplist homepage: http://www.libimobiledevice.org/ libplist: libplist: libplist: libplist: libplist: PACKAGE NAME: libpng-1.4.5-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 549 K PACKAGE SIZE (uncompressed): 3580 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libpng: libpng (Portable Network Graphics library) libpng: libpng: PNG (Portable Network Graphics) is an extensible file format for the libpng: lossless, portable, well-compressed storage of raster images. PNG libpng: provides a patent-free replacement for GIF and can also replace many libpng: common uses of TIFF. Indexed-color, grayscale, and truecolor images libpng: are supported, plus an optional alpha channel. Sample depths range libpng: from 1 to 16 bits. libpng: libpng: libpng: PACKAGE NAME: libproxy-0.4.6-x86_64-2vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 84 K PACKAGE SIZE (uncompressed): 340 K PACKAGE REQUIRED: dbus >= 1.2.12,libmodman >= 1.0.1,python >= 2.6.1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libproxy: libproxy (A library handling all the details of proxy configuration) libproxy: libproxy: libproxy is a library that provides automatic proxy configuration libproxy: management. libproxy: libproxy: http://code.google.com/p/libproxy/ libproxy: libproxy: libproxy: Packager: vl70@vector.linux.net on 26-Mar-2011 libproxy: libproxy: PACKAGE NAME: libraw-0.10.0-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 134 K PACKAGE SIZE (uncompressed): 630 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libraw|-----handy-ruler------------------------------------------------------| libraw: libraw (Raw image decoder library) libraw: libraw: LibRaw is a library for reading RAW files obtained from digital photo libraw: cameras (CRW/CR2, NEF, RAF, DNG, and others). libraw: libraw: http://www.libraw.org/ libraw: libraw: libraw: Packager: vl70@vector.linux.net on 14-Feb-2011 libraw: libraw: PACKAGE NAME: libraw1394-2.0.7-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 63 K PACKAGE SIZE (uncompressed): 250 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libraw1394: libraw1394 (user space IEEE 1394 driver) libraw1394: libraw1394: libraw1394 provides direct access to the IEEE 1394 bus through libraw1394: the Linux 1394 subsystem's raw1394 user space interface. libraw1394: libraw1394: Homepage: http://www.kernel.org/pub/linux/libs/ieee1394/ libraw1394: libraw1394: libraw1394: libraw1394: libraw1394: PACKAGE NAME: librsvg-2.32.0-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 146 K PACKAGE SIZE (uncompressed): 700 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: librsvg: librsvg (SVG library) librsvg: librsvg: Library for handling SVG (Scalable Vector Graphics). librsvg: librsvg: librsvg: librsvg: librsvg: librsvg: librsvg: librsvg: PACKAGE NAME: libsamplerate-0.1.7-x86_64-2.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 970 K PACKAGE SIZE (uncompressed): 1660 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libsamplerate: libsamplerate (a Sample Rate Converter for audio) libsamplerate: libsamplerate: Secret Rabbit Code (aka libsamplerate) is a Sample Rate Converter for libsamplerate: audio. One example of where such a thing would be useful is libsamplerate: converting audio from the CD sample rate of 44.1kHz to the 48kHz libsamplerate: sample rate used by DAT players. SRC is capable of arbitrary and time libsamplerate: varying conversions. SRC provides a small set of converters to allow libsamplerate: quality to be traded off against computation cost. libsamplerate: libsamplerate: libsamplerate home: http://www.mega-nerd.com/SRC/ libsamplerate: PACKAGE NAME: libsexy-0.1.11-x86_64-5vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 58 K PACKAGE SIZE (uncompressed): 310 K PACKAGE REQUIRED: enchant >= 1.3.0,gtk+2 >= 2.12.8,libxml2 >= 2.6.31 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libsexy: libsexy (Funky fresh graphical widgets for GTK+ 2) libsexy: libsexy: libsexy is a collection of GTK+ widgets that extend the functionality libsexy: of such standard widgets as GtkEntry and GtkLabel by subclassing libsexy: them and working around the limitations of the widgets. libsexy: libsexy: http://www.chipx86.com/wiki/Libsexy libsexy: libsexy: libsexy: Packager: vl70@vector.linux.net on 14-Feb-2011 libsexy: PACKAGE NAME: libshout-2.2.2-x86_64-3vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 43 K PACKAGE SIZE (uncompressed): 170 K PACKAGE REQUIRED: libogg >= 1.1.3,libtheora >= 1.0beta3,libvorbis >= 1.2.0,speex >= 1.2.beta3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libshout: libshout (icecast source streaming library) libshout: libshout: libshout is a library for communicating with and sending data to an libshout: icecast server. It handles the socket connection, the timing of the libshout: data, and prevents most bad data from getting to the icecast server. libshout: libshout: http://www.icecast.org/ libshout: libshout: libshout: Packager: vl70@vector.linux.net on 14-Feb-2011 libshout: PACKAGE NAME: libsigc++-2.2.8-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 2904 K PACKAGE SIZE (uncompressed): 11490 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libsigc++: libsigc++ (Typesafe signal framework for C++) libsigc++: libsigc++: This library implements a full callback system for use in widget libsigc++: libraries, abstract interfaces, and general programming. Originally libsigc++: part of the Gtk-- widget set, libsigc++ is now a seperate library to libsigc++: provide for more general use. libsigc++: libsigc++: http://libsigc.sourceforge.net/ libsigc++: libsigc++: libsigc++: Packager: vl70@vector.linux.net on 26-Mar-2011 PACKAGE NAME: libsndfile-1.0.23-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 233 K PACKAGE SIZE (uncompressed): 860 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libsndfile: libsndfile (C library for reading and writing wav files) libsndfile: libsndfile: Libsndfile is a C library for reading and writing files containing libsndfile: sampled sound (such as MS Windows WAV and Apple/SGI AIFF format). libsndfile: libsndfile: Homepage: http://www.mega-nerd.com/libsndfile/ libsndfile: libsndfile: libsndfile: libsndfile: libsndfile: PACKAGE NAME: libsoup-2.33.90-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 343 K PACKAGE SIZE (uncompressed): 2880 K PACKAGE REQUIRED: glib2 >= 2.20.1,glib-networking >= 2.28.0,libgnome-keyring >= 2.32.0,libproxy >= 0.2.3,libxml2 >= 2.7.3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libsoup: libsoup (Soup, an HTTP library implementation) libsoup: libsoup: Libsoup is an HTTP library implementation in C. It was originally libsoup: part of a SOAP (Simple Object Access Protocol) implementation called libsoup: Soup, but the SOAP and non-SOAP parts have now been split into libsoup: separate packages. libsoup: libsoup: ftp://ftp.gnome.org/pub/gnome/sources/libsoup/ libsoup: libsoup: libsoup: Packager: vl70@vector.linux.net on 26-Mar-2011 PACKAGE NAME: libtalloc-2.0.1-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 34 K PACKAGE SIZE (uncompressed): 130 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libtalloc|-----handy-ruler------------------------------------------------------| libtalloc: libtalloc (The talloc library) libtalloc: libtalloc: A library that implements a hierarchical allocator with destructors. libtalloc: libtalloc: http://talloc.samba.org/ libtalloc: libtalloc: libtalloc: Packager: vl70@vector.linux.net on 14-Feb-2011 libtalloc: libtalloc: libtalloc: PACKAGE NAME: libtasn1-2.6-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 120 K PACKAGE SIZE (uncompressed): 400 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libtasn1: Libtasn1 libtasn1: libtasn1: This is the ASN.1 library used in GNUTLS. libtasn1: libtasn1: http://josefsson.org/libtasn1/ libtasn1: libtasn1: libtasn1: Packager: vl70@vector.linux.net on 14-Feb-2011 libtasn1: libtasn1: libtasn1: PACKAGE NAME: libtheora-1.1.1-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 178 K PACKAGE SIZE (uncompressed): 810 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libtheora: libtheora (Theora video codec library) libtheora: libtheora: Theora is Xiph.Org's first publicly released video codec, intended libtheora: for use within the Foundation's Ogg multimedia streaming system. libtheora: libtheora: The Theora bitstream format was frozen after the alpha3 release. This libtheora: means that files produced by the alpha3 encoder will always be libtheora: playable according to the Theora I specification. Traditionally libtheora: alpha means a proof of concept, not a production-ready release. libtheora: However the code is very robust, ready for and indeed in general use. libtheora: PACKAGE NAME: libtiff-3.9.4-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 459 K PACKAGE SIZE (uncompressed): 1830 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libtiff: libtiff (a library for reading and writing TIFF files) libtiff: libtiff: This package provides support for the Tag Image File Format (TIFF), libtiff: a widely used format for storing image data. Included is the libtiff libtiff: library (for reading and writing TIFF files), and a collection of libtiff: tools for working with TIFF images. libtiff: libtiff: libtiff: libtiff: libtiff: PACKAGE NAME: libusb-1.0.8-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 63 K PACKAGE SIZE (uncompressed): 270 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libusb: libusb (USB library) libusb: libusb: This is libusb, a library which allows userspace application access libusb: to USB devices. It is used to connect to USB devices like scanners. libusb: http://libusb.org/wiki/Libusb1.0 libusb: libusb: This package also contains libusb-compat for the "old" libusb users. libusb: http://libusb.org/wiki/LibusbCompat0.1 libusb: libusb: libusb: PACKAGE NAME: libv4l-0.6.4-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 95 K PACKAGE SIZE (uncompressed): 340 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libv4l: libv4l (Collection of video4linux support libraries) libv4l: libv4l: libv4l is a collection of libraries which adds a thin abstraction libv4l: layer on top of video4linux2 devices. The purpose of this (thin) layer libv4l: is to make it easy for application writers to support a wide variety libv4l: of devices without having to write separate code for different devices libv4l: in the same class. libv4l consists of 3 different libraries: libv4l: libv4lconvert, libv4l1 and libv4l2. libv4l: libv4l: http://hansdegoede.livejournal.com/3636.html libv4l: Packager: vl70@vector.linux.net on 26-Mar-2011 PACKAGE NAME: libvisual-0.4.0-x86_64-2.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 124 K PACKAGE SIZE (uncompressed): 570 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libvisual: libvisual (audio visualization library) libvisual: libvisual: Libvisual is an audio visualization library that acts as a middle libvisual: layer between audio visualization plugins and applications. Any libvisual: application written with libvisual support included will be able to libvisual: make use of all the plugins that are written for libvisual. libvisual: Libvisual also contains a whole set of facilities to ease the libvisual: development of plugins. libvisual: libvisual: Libvisual was written by Dennis Smit. libvisual: PACKAGE NAME: libvisual-plugins-0.4.0-x86_64-2.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 215 K PACKAGE SIZE (uncompressed): 1080 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libvisual-plugins: libvisual-plugins (plugins for the libvisual library) libvisual-plugins: libvisual-plugins: By itself, libvisual only provides a framework to build upon. The libvisual-plugins: plugins in this package are designed to work with libvisual to allow libvisual-plugins: it to actually do all sorts of interesting visualizations based on libvisual-plugins: metrics gathered as players process audio information data. Plugins libvisual-plugins: can be mixed (more than one run at a time), or morphed from one to libvisual-plugins: another. Other special effects are possible as well. libvisual-plugins: libvisual-plugins: Several authors have contributed libvisual-plugins under the GPL. libvisual-plugins: PACKAGE NAME: libvorbis-1.3.2-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 301 K PACKAGE SIZE (uncompressed): 3810 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libvorbis: libvorbis (Ogg Vorbis library) libvorbis: libvorbis: This library supports the Vorbis General Audio Compression Codec libvorbis: (commonly known as Ogg Vorbis). Ogg Vorbis is a fully open, libvorbis: non-proprietary, patent-and-royalty-free, general-purpose compressed libvorbis: audio format for audio and music at fixed and variable bitrates. libvorbis: libvorbis: The libvorbis library requires libao and libogg. You'll find some libvorbis: basic tools for creating and using Ogg Vorbis files in the libvorbis: vorbis-tools package. libvorbis: PACKAGE NAME: libvpx-0.9.1-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 185 K PACKAGE SIZE (uncompressed): 620 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libvpx|-----handy-ruler------------------------------------------------------| libvpx: libvpx (VP8 Video Codec SDK) libvpx: libvpx: libvpx provides the VP8 SDK, which allows you to integrate your libvpx: applications with the VP8 video codec, a high quality, royalty free, libvpx: open source codec deployed on millions of computers and devices libvpx: worldwide. libvpx: libvpx: http://webm.googlecode.com/ libvpx: libvpx: libvpx: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: libwmf-0.2.8.4-x86_64-5.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 734 K PACKAGE SIZE (uncompressed): 1620 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libwmf: libwmf (WMF graphics format library) libwmf: libwmf: libwmf is a library for interpreting metafile images and either libwmf: displaying them using X or converting them to standard formats such libwmf: as PNG, JPEG, PS, EPS and SVG. libwmf: libwmf: libwmf: libwmf: libwmf: libwmf: PACKAGE NAME: libwnck-2.30.6-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 351 K PACKAGE SIZE (uncompressed): 2900 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libwnck: libwnck (Window Navigator Construction Kit library) libwnck: libwnck: libwnck is the Window Navigator Construction Kit, a library for use libwnck: in writing pagers, tasklists, and more generally applications that libwnck: are dealing with window management. It tries hard to respect the libwnck: Extended Window Manager Hints specification (EWMH). libwnck: libwnck: libwnck is used by compiz to provide the gtk-window-decorator program. libwnck: libwnck: libwnck: PACKAGE NAME: libwpd-0.9.1-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 874 K PACKAGE SIZE (uncompressed): 13540 K PACKAGE REQUIRED: glib2 >= 2.22.4,libgsf >= 1.14.16 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libwpd: libwpd (WordPerfect document format library) libwpd: libwpd: This package contains a library (libwpd) and tools to transform libwpd: WordPerfect documents into other formats such as HTML, text, and raw. libwpd: libwpd: libwpd is used by word processors such as KWord. libwpd: libwpd: http://libwpd.sf.net/ libwpd: libwpd: libwpd: Packager: vl70@vector.linux.net on 26-Mar-2011 PACKAGE NAME: libwpg-0.2.0-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 148 K PACKAGE SIZE (uncompressed): 1630 K PACKAGE REQUIRED: libwpd >= 0.8.14 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libwpg: libwpg (Library for reading WordPerfect Graphics images) libwpg: libwpg: Libwpg project is a library and to work with graphics in WPG libwpg:(WordPerfect Graphics) format. WPG is the format used among others libwpg: in Corel sofware, such as WordPerfect and Presentations. libwpg: libwpg: http://libwpg.sourceforge.net/ libwpg: libwpg: libwpg: Packager: vl70@vector.linux.net on 26-Mar-2011 libwpg: PACKAGE NAME: libwvstreams-4.6.1-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 1121 K PACKAGE SIZE (uncompressed): 8990 K PACKAGE REQUIRED: dbus >= 1.2.16,openssl >= 0.9.8g | openssl-solibs >= 0.9.8g PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libwvstreams: libwvstreams (A network programming library written in C++) libwvstreams: libwvstreams: WvStreams aims to be an efficient, secure, and easy-to-use library libwvstreams: for doing network applications development. libwvstreams: libwvstreams: http://alumnit.ca/wiki/?WvStreams libwvstreams: libwvstreams: libwvstreams: Packager: vl70@vector.linux.net on 26-Mar-2011 libwvstreams: libwvstreams: PACKAGE NAME: libxdg-basedir-1.0.2-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 11 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: glibc-solibs >= 2.13 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libxdg-basedir: libxdg-basedir (XDG specification higher level functions) libxdg-basedir: The XDG Base Directory Specification defines where should user files libxdg-basedir: be looked for by defining one or more base directories relative in libxdg-basedir: with they should be located. This library implements functions to libxdg-basedir: list the directories according to the specification and provides a libxdg-basedir: few higher-level functions. libxdg-basedir: libxdg-basedir: License: MIT License libxdg-basedir: Authors: Mark Nevill libxdg-basedir: Website: http://n.ethz.ch/~nevillm/download/libxdg-basedir/ PACKAGE NAME: libxklavier-5.1-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 77 K PACKAGE SIZE (uncompressed): 490 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libxklavier: libxklavier (XKB Library) libxklavier: libxklavier: libxklavier is a utility library to make XKB stuff easier. libxklavier: libxklavier: Homepage: http://www.freedesktop.org/wiki/Software/LibXklavier libxklavier: libxklavier: libxklavier: libxklavier: libxklavier: libxklavier: PACKAGE NAME: libxml2-2.7.8-x86_64-3vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 1371 K PACKAGE SIZE (uncompressed): 11490 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libxml2: libxml2 (XML parser library) libxml2: libxml2: Libxml2 is the XML C parser library and toolkit. XML itself is a libxml2: metalanguage to design markup languages -- i.e. a text language where libxml2: structures are added to the content using extra "markup" information libxml2: enclosed between angle brackets. HTML is the most well-known markup libxml2: language. Though the library is written in C, a variety of language libxml2: bindings make it available in other environments. libxml2: libxml2: libxml2: PACKAGE NAME: libxslt-1.1.26-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 401 K PACKAGE SIZE (uncompressed): 3120 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libxslt: libxslt (XML transformation library) libxslt: libxslt: XSLT support for libxml2. (XSLT is a language used for transforming libxslt: XML documents) libxslt: libxslt: libxslt: libxslt: libxslt: libxslt: libxslt: PACKAGE NAME: link-grammar-4.6.4-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 433 K PACKAGE SIZE (uncompressed): 1750 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: link-grammar|-----handy-ruler------------------------------------------------------| link-grammar: link-grammar (A Grammar Checking library) link-grammar: link-grammar: A library that can perform grammar checking. link-grammar: link-grammar: http://www.abisource.com/ link-grammar: link-grammar: link-grammar: Packager: vl70@vector.linux.net on 14-Feb-2011 link-grammar: link-grammar: link-grammar: PACKAGE NAME: lockdev-1.0.3-x86_64-2vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 22 K PACKAGE SIZE (uncompressed): 100 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: lockdev|-----handy-ruler------------------------------------------------------| lockdev: lockdev (A library for locking devices) lockdev: lockdev: Lockdev provides a reliable way to put an exclusive lock to devices lockdev: using both FSSTND and SVr4 methods. lockdev: lockdev: http://packages.debian.org/unstable/source/lockdev lockdev: lockdev: lockdev: Packager: vl70@vector.linux.net on 14-Feb-2011 lockdev: lockdev: PACKAGE NAME: loudmouth-1.4.3-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 74 K PACKAGE SIZE (uncompressed): 470 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: loudmouth: loudmouth (XMPP C programming library) loudmouth: loudmouth: Loudmouth is a lightweight and easy-to-use C library for programming loudmouth: with the Jabber protocol. It is designed to be easy to get started loudmouth: with, and yet extensible enough to allow you to do anything that the loudmouth: Jabber protocol allows. loudmouth: loudmouth: loudmouth home: http://www.loudmouth-project.org/ loudmouth: loudmouth: loudmouth: PACKAGE NAME: lzo-2.03-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 71 K PACKAGE SIZE (uncompressed): 370 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: lzo: lzo (LZO Compression Library) lzo: lzo: LZO is a portable lossless data compression library written in ANSI C. lzo: It offers pretty fast compression and very fast decompression. lzo: lzo: Homepage: http://www.oberhumer.com/opensource/lzo/ lzo: lzo: lzo: lzo: lzo: PACKAGE NAME: meanwhile-1.0.2-x86_64-2vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 298 K PACKAGE SIZE (uncompressed): 3730 K PACKAGE REQUIRED: glib2 >= 2.16.3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: meanwhile|-----handy-ruler------------------------------------------------------| meanwhile: meanwhile (Lotus Sametime Community Client library) meanwhile: meanwhile: The heart of the Meanwhile Project is the Meanwhile library, providing meanwhile: the basic Lotus Sametime session functionality along with the core meanwhile: services; Presence Awareness, Instant Messaging, Multi-user meanwhile: Conferencing, Preferences Storage, Identity Resolution, and File meanwhile: Transfer. meanwhile: meanwhile: http://meanwhile.sourceforge.net meanwhile: meanwhile: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: mhash-0.9.9.9-x86_64-3.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 118 K PACKAGE SIZE (uncompressed): 510 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: mhash: mhash (Thread-safe hash library) mhash: mhash: mhash is a thread-safe hash library, implemented in C, and provides a mhash: uniform interface to a large number of hash algorithms (MD5, SHA-1, mhash: HAVAL, RIPEMD128, RIPEMD160, TIGER, GOST). These algorithms can be mhash: used to compute checksums, message digests, and other signatures. mhash: The HMAC support implements the basics for message authentication, mhash: following RFC 2104. mhash: mhash: mhash: PACKAGE NAME: mpfr-3.0.0p08-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 283 K PACKAGE SIZE (uncompressed): 1440 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: mpfr: mpfr (Multiple-Precision Floating-Point Reliable Library) mpfr: mpfr: The MPFR library is a C library for multiple-precision floating-point mpfr: computations with exact rounding (also called correct rounding). mpfr: It is based on the GMP multiple-precision library. mpfr: The main goal of MPFR is to provide a library for multiple-precision mpfr: floating-point computation which is both efficient and has mpfr: well-defined semantics. It copies the good ideas from the mpfr: ANSI/IEEE-754 standard for double-precision floating-point arithmetic mpfr: (53-bit mantissa). mpfr: PACKAGE NAME: murrine-themes-0.53.1-noarch-2vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 147 K PACKAGE SIZE (uncompressed): 1520 K PACKAGE REQUIRED: gtk-murrine-engine >= 0.53.1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: murrine-themes: murrine-themes (Themes for gtk murrine engine) murrine-themes: murrine-themes: Themes for gtk2 murrine engine. murrine-themes: murrine-themes: http://www.cimitan.com/murrine/ murrine-themes: murrine-themes: murrine-themes: Packager: vl70@vector.Linux.net on 16-Jan-2011 murrine-themes: murrine-themes: murrine-themes: PACKAGE NAME: ncurses-5.8-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 1058 K PACKAGE SIZE (uncompressed): 8500 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: ncurses: ncurses (CRT screen handling and optimization package) ncurses: ncurses: The ncurses (new curses) library is a free software emulation of ncurses: curses in System V Release 4.0, and more. It uses terminfo format, ncurses: supports pads and color and multiple highlights and forms characters ncurses: and function-key mapping, and has all the other SYSV-curses ncurses: enhancements over BSD curses. ncurses: ncurses: ncurses: ncurses: PACKAGE NAME: neon-0.29.5-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 198 K PACKAGE SIZE (uncompressed): 880 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: neon: neon (HTTP and WebDAV client library) neon: neon: neon is an HTTP and WebDAV client library, with a C language API. neon: Bindings for other languages may also be available, see the web site neon: for more details: http://www.webdav.org/neon/ neon: neon: The neon library is used by projects such as subversion. neon: neon: neon: neon: PACKAGE NAME: net-snmp-5.6.1-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 1966 K PACKAGE SIZE (uncompressed): 8270 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: net-snmp: net-snmp (Simple Network Management Protocol tools) net-snmp: net-snmp: Various tools relating to the Simple Network Management Protocol: net-snmp: net-snmp: An extensible agent net-snmp: An SNMP library net-snmp: Tools to request or set information from SNMP agents net-snmp: Tools to generate and handle SNMP traps net-snmp: A version of the unix 'netstat' command using SNMP net-snmp: A graphical Perl/Tk/SNMP based mib browser net-snmp: PACKAGE NAME: netkit-rwho-0.17-x86_64-2.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 16 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: netkit-rwho: netkit-rwho (who is logged in on local machines) netkit-rwho: netkit-rwho: The rwho command produces output similar to who, but for all machines netkit-rwho: on the local network. If no report has been received from a machine netkit-rwho: for 11 minutes then rwho assumes the machine is down, and does not netkit-rwho: report users last known to be logged into that machine. If a users netkit-rwho: hasn't typed to the system for a minute or more, then rwho reports netkit-rwho: this idle time. If a user hasn't typed to the system for an hour or netkit-rwho: more, then the user will be omitted from the output of rwho unless netkit-rwho: the -a flag is given. netkit-rwho: PACKAGE NAME: netpbm-10.49.02-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 1591 K PACKAGE SIZE (uncompressed): 6270 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: netpbm: netpbm (graphics conversion utilities) netpbm: netpbm: The netpbm package contains a library and tools for converting between netpbm: many different graphics formats. netpbm: netpbm: netpbm: netpbm: netpbm: netpbm: netpbm: PACKAGE NAME: notify-python-0.1.1-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 18 K PACKAGE SIZE (uncompressed): 90 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: notify-python: notify-python (Python bindings for libnotify) notify-python: notify-python: The notify-python package contains bindings to use libnotify with notify-python: Python programs. notify-python: notify-python: Homepage for notify-python: http://www.galago-project.org/ notify-python: notify-python: notify-python: notify-python: notify-python: PACKAGE NAME: nspr-4.8.7-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 183 K PACKAGE SIZE (uncompressed): 860 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: nspr: nspr (Netscape Portable Runtime) nspr: nspr: NSPR provides platform independence for non-GUI operating system nspr: facilities. These facilities include threads, thread synchronization, nspr: normal file and network I/O, interval timing and calendar time, basic nspr: memory management (malloc and free) and shared library linking. nspr: nspr: http://www.mozilla.org/projects/nspr/ nspr: nspr: nspr: Packager: vl70@vector.linux.net on 27-Mar-2011 PACKAGE NAME: nss-3.12.9-x86_64-2vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 1547 K PACKAGE SIZE (uncompressed): 8220 K PACKAGE REQUIRED: nspr >= 4.8.6,sqlite >= 3.6.13 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: nss: nss (Network Security Services) nss: nss: Network Security Services (NSS) is a set of libraries designed to nss: support cross-platform development of security-enabled client and nss: server applications. Applications built with NSS can support SSL v2 nss: and v3, TLS, PKCS #5, PKCS #7, PKCS #11, PKCS #12, S/MIME, X.509 nss: v3 certificates, and other security standards. nss: nss: http://www.mozilla.org/projects/security/pki/nss/ nss: nss: Packager: vl70@vector.linux.net on 27-Mar-2011 PACKAGE NAME: numpy-1.4.1-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 1936 K PACKAGE SIZE (uncompressed): 10300 K PACKAGE REQUIRED: fftw >= 3.1.2,lapack >= 3.1.1,python >= 2.6 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: numpy|-----handy-ruler------------------------------------------------------| numpy: numpy (A fast multidimensional array facility for Python) numpy: numpy: NumPy is a general-purpose array-processing package designed to numpy: efficiently manipulate large multi-dimensional arrays of arbitrary numpy: records without sacrificing too much speed for small multi-dimensional numpy: arrays. numpy: numpy: http://numeric.scipy.org/ numpy: numpy: numpy: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: opencdk-0.6.6-x86_64-2vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 96 K PACKAGE SIZE (uncompressed): 350 K PACKAGE REQUIRED: libgcrypt >= 1.4.0,libgpg-error >= 1.6,zlib >= 1.2.3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: opencdk: OpenCDK (Open Crypto Development) opencdk: opencdk: This library provides basic parts of the OpenPGP message format. opencdk: The aim of the library is *not* to replace any available OpenPGP version. opencdk: There will be no real support for key management (sign, revoke, opencdk: alter preferences, ...) and some other parts are only rudimentary opencdk: available. The main purpose is to handle and understand OpenPGP opencdk: packets and to use basic operations. For example to encrypt/decrypt opencdk: or to sign/verify and packet routines. opencdk: http://www.gnu.org/software/gnutls/ opencdk: Packager: vl70@vector.linux.net on 26-Mar-2011 PACKAGE NAME: opencore-amr-0.1.2-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 138 K PACKAGE SIZE (uncompressed): 340 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: opencore-amr|-----handy-ruler------------------------------------------------------| opencore-amr: opencore-amr (Implementation of AMR-NB and AMR-WB) opencore-amr: opencore-amr: Implementation of Adaptive Multi Rate Narrowband and Wideband speech opencore-amr: codec. opencore-amr: opencore-amr: http://opencore-amr.sourceforge.net/ opencore-amr: opencore-amr: opencore-amr: Packager: vl70@vector.linux.net on 14-Feb-2011 opencore-amr: opencore-amr: PACKAGE NAME: opencv-2.1.0-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 11325 K PACKAGE SIZE (uncompressed): 43100 K PACKAGE REQUIRED: gstreamer >= 0.10.25,gtk+2 >= 2.18.5,jasper >= 1.900.1,libdc1394 >= 2.1.2,libjpeg >= 8,libpng >= 1.4.1,libraw1394 >= 2.0.4,libtiff >= 3.9.2,libvorbis >= 1.2.3,unicap >= 0.9.7 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: opencv|-----handy-ruler------------------------------------------------------| opencv: opencv (Collection of algorithms for computer vision) opencv: opencv: OpenCV means Intel® Open Source Computer Vision Library. It is a opencv: collection of C functions and a few C++ classes that implement some opencv: popular Image Processing and Computer Vision algorithms. opencv: opencv: http://opencv.willowgarage.com/wiki/ opencv: opencv: opencv: Packager: vl70@vector.linux.net on 14-Feb-2011 opencv: PACKAGE NAME: openexr-1.7.0-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 2981 K PACKAGE SIZE (uncompressed): 4320 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: openexr: openexr (HDR Image File Format & Library) openexr: openexr: OpenEXR is an image file format and library developed by Industrial openexr: Light & Magic, and later released to the public. It provides support openexr: for high dynamic range and a 16-bit floating point "half" data type openexr: which is compatible with the half data type in the Cg programming openexr: language. openexr: openexr: Homepage: http://www.openexr.org/ openexr: openexr: PACKAGE NAME: openjpeg-1.3-x86_64-2vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 145 K PACKAGE SIZE (uncompressed): 550 K PACKAGE REQUIRED: libtiff >= 3.8.2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: openjpeg|-----handy-ruler------------------------------------------------------| openjpeg: openjpeg (OpenJPEG command line tools) openjpeg: openjpeg: OpenJPEG is an open-source JPEG 2000 codec written in C language. It openjpeg: has been developed in order to promote the use of JPEG 2000, the new openjpeg: still-image compression standard from the Joint Photographic Experts openjpeg: Group (JPEG). openjpeg: openjpeg: http://www.openjpeg.org/ openjpeg: openjpeg: openjpeg: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: orc-0.4.3-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 128 K PACKAGE SIZE (uncompressed): 1010 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: orc|-----handy-ruler------------------------------------------------------| orc: orc (The Oild Runtime Compiler) orc: orc: Orc is a library and set of tools for compiling and executing very orc: simple programs that operate on arrays of data. The "language" is a orc: generic assembly language that represents many of the features orc: available in SIMD architectures, including saturated addition and orc: subtraction, and many arithmetic operations. orc: orc: http://code.entropywave.com/projects/orc/ orc: orc: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: ots-0.5.0-x86_64-2vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 40 K PACKAGE SIZE (uncompressed): 260 K PACKAGE REQUIRED: glib2 >= 2.16.1,libxml2 >= 2.6.31,popt >= 1.13 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: ots|-----handy-ruler------------------------------------------------------| ots: ots (A text summarizer) ots: ots: The open text summarizer is an open source tool for summarizing texts. ots: The program reads a text and decides which sentences are important and ots: which are not. ots: ots: http://libots.sourceforge.net/ ots: ots: ots: Packager: vl70@vector.linux.net on 14-Feb-2011 ots: PACKAGE NAME: pango-1.28.3-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 491 K PACKAGE SIZE (uncompressed): 3530 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pango: pango (library for layout and rendering of text) pango: pango: Pango is a library for layout and rendering of text, with an emphasis pango: on internationalization. Pango can be used anywhere that text layout pango: is needed; however, most of the work on Pango was done using the GTK+ pango: widget toolkit as a test platform. Pango forms the core of text and pango: font handling for GTK+-2. pango: pango: pango: pango: PACKAGE NAME: pangomm-2.27.1-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 508 K PACKAGE SIZE (uncompressed): 3700 K PACKAGE REQUIRED: cairomm >= 1.8.0,glibmm >= 2.20.0,pango >= 1.24.0 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pangomm: pangomm (C++ interface for Pango) pangomm: pangomm: pangomm provides a C++ interface to the Pango library. Highlights pangomm: include typesafe callbacks, widgets extensible via inheritance and a pangomm: comprehensive set of widget classes that can be freely combined to pangomm: quickly create complex user interfaces. pangomm: pangomm: http://gtkmm.sourceforge.net/ pangomm: pangomm: pangomm: Packager: vl70@vector.linux.net on 26-Mar-2011 PACKAGE NAME: parted-2.3-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 507 K PACKAGE SIZE (uncompressed): 2270 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: parted: parted (GNU disk partitioning tool) parted: parted: GNU Parted is a program for creating, destroying, resizing, checking parted: and copying partitions, and the filesystems on them. This is useful parted: for creating space for new operating systems, reorganizing disk parted: usage, copying data between hard disks, and disk imaging. parted: parted: parted: parted: parted: PACKAGE NAME: pcre-8.02-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 392 K PACKAGE SIZE (uncompressed): 1380 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pcre: pcre (Perl-compatible regular expression library) pcre: pcre: The PCRE library is a set of functions that implement regular pcre: expression pattern matching using the same syntax and semantics as pcre: Perl 5, with just a few differences (documented in the man page). pcre: pcre: The PCRE library is used by KDE's Konqueror browser. pcre: pcre: pcre: pcre: PACKAGE NAME: perl-file-desktopentry-0.04-noarch-2vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 17 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: perl >= 5.10.0,perl-file-basedir >= 0.03 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: perl-file-desktopentry: perl-file-desktopentry (Object to handle .desktop files) perl-file-desktopentry: perl-file-desktopentry: This module is used to work with .desktop files. The format of these perl-file-desktopentry: files is specified by the freedesktop "Desktop Entry" specification. perl-file-desktopentry: See http://freedesktop.org/wiki/Standards_2fdesktop_2dentry_2dspec. perl-file-desktopentry: For this module version 0.9.4 of the specification was used. perl-file-desktopentry: perl-file-desktopentry: http://search.cpan.org/dist/File-DesktopEntry/ perl-file-desktopentry: perl-file-desktopentry: perl-file-desktopentry: Packager: vl70@vector.Linux.net on 30-Jan-2011 PACKAGE NAME: pil-1.1.7-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 358 K PACKAGE SIZE (uncompressed): 1590 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pil: pil (Python Imaging Library) pil: pil: The Python Imaging Library (PIL) adds image processing capabilities pil: to your Python environment. This library provides extensive file pil: format support, an efficient internal representation, and powerful pil: image processing capabilities. pil: pil: PIL is used by the scanning component of HPLIP. pil: pil: PIL homepage: http://www.pythonware.com/products/pil/ pil: PACKAGE NAME: pilot-link-0.12.5-x86_64-3vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 547 K PACKAGE SIZE (uncompressed): 2210 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pilot-link: pilot-link (library for communicating with PalmOS devices) pilot-link: pilot-link: This is a library for communicating with Palm Computing, Inc. Palm pilot-link: Devices as well as the Handspring Visor, TRGPro, and other devices pilot-link: which conform to this standard (PalmOS licensed devices). pilot-link: pilot-link: pilot-link is used by KPilot. pilot-link: pilot-link: pilot-link: pilot-link: PACKAGE NAME: podofo-0.8.3-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 650 K PACKAGE SIZE (uncompressed): 3040 K PACKAGE REQUIRED: fontconfig >= 2.7.1,freetype >= 2.3.9,libjpeg >= 8,libtiff >= 3.9.2,zlib >= 1.2.3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: podofo|-----handy-ruler------------------------------------------------------| podofo: podofo (Tools and libraries to work with the PDF file format) podofo: podofo: PoDoFo is a library to work with the PDF file format. The name comes podofo: from the first letter of PDF (Portable Document Format). A few tools podofo: to work with PDF files are already included in the PoDoFo package. podofo: podofo: http://podofo.sourceforge.net podofo: podofo: podofo: Packager: vl70@vector.linux.net on 14-Feb-2011 podofo: PACKAGE NAME: polkit-0.101-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 355 K PACKAGE SIZE (uncompressed): 1740 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: polkit: polkit (authentication framework) polkit: polkit: PolicyKit is an application-level toolkit for defining and handling polkit: the policy that allows unprivileged processes to speak to privileged polkit: processes. PolicyKit is specifically targeting applications in rich polkit: desktop environments on multi-user UNIX-like operating systems. polkit: polkit: polkit: polkit: Home: http://www.freedesktop.org/wiki/Software/PolicyKit polkit: PACKAGE NAME: polkit-gnome-0.101-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 95 K PACKAGE SIZE (uncompressed): 670 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: polkit-gnome: polkit-gnome (GTK+ authentication agent for polkit) polkit-gnome: polkit-gnome: polkit-gnome provides a GTK+ based authentication agent for polkit. polkit-gnome: It can be used by any desktop environment that follows the XDG polkit-gnome: Base Directory Specification. polkit-gnome: polkit-gnome: polkit-gnome: polkit-gnome: polkit-gnome: polkit-gnome: PACKAGE NAME: poppler-0.16.2-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 1009 K PACKAGE SIZE (uncompressed): 5260 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: poppler: poppler (a library for rendering PDF documents) poppler: poppler: Poppler is a library based on the xpdf PDF viewer developed by Derek poppler: Noonburg of Glyph and Cog, LLC. Since xpdf does not provide a shared poppler: library, whenever a flaw was found potentially dozens of applications poppler: incorporating code from xpdf would have to be patched. By providing poppler: a centralized PDF library this duplicated effort will be eliminated. poppler: poppler: poppler: poppler: PACKAGE NAME: poppler-data-0.4.4-noarch-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 1447 K PACKAGE SIZE (uncompressed): 11920 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: poppler-data: poppler-data (data files used by poppler) poppler-data: poppler-data: This package consists of encoding files for use with poppler. The poppler-data: encoding files are optional and poppler will automatically read them poppler-data: if they are present. When installed, the encoding files enables poppler-data: poppler to correctly render CJK and Cyrillic properly. While poppler poppler-data: is licensed under the GPL, these encoding files are copyright Adobe poppler-data: and licensed much more strictly, and thus distributed separately. poppler-data: poppler-data: poppler-data: PACKAGE NAME: popt-1.7-x86_64-3.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 40 K PACKAGE SIZE (uncompressed): 200 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: popt: popt (command line parsing library) popt: popt: Popt is a C library for parsing command line parameters. Popt was popt: heavily influenced by the getopt() and getopt_long() functions, but it popt: improves on them by allowing more powerful argument expansion. Popt popt: can parse arbitrary argv[] style arrays and automatically set popt: variables based on command line arguments. Popt allows command line popt: arguments to be aliased via configuration files and includes utility popt: functions for parsing arbitrary strings into argv[] arrays using popt: shell-like rules. popt: PACKAGE NAME: pycairo-1.8.10-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 44 K PACKAGE SIZE (uncompressed): 200 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pycairo: pycairo (a set of Python bindings for the cairo graphics library) pycairo: pycairo: Pycairo is set of Python bindings for the cairo graphics library. pycairo: pycairo: Pycairo's web site: http://cairographics.org/pycairo pycairo: pycairo: pycairo: pycairo: pycairo: pycairo: PACKAGE NAME: pycups-1.9.55-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 61 K PACKAGE SIZE (uncompressed): 240 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pycups: pycups (Python bindings for the CUPS API) pycups: pycups: These Python bindings are intended to wrap the CUPS API. pycups: pycups: Homepage: http://cyberelk.net/tim/software/pycups/ pycups: pycups: pycups: pycups: pycups: pycups: PACKAGE NAME: pygobject-2.26.0-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 392 K PACKAGE SIZE (uncompressed): 3470 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pygobject: pygobject (GObject bindings for Python) pygobject: pygobject: This archive contains bindings for the GObject, to be used in Python. pygobject: It is a fairly complete set of bindings, it's already rather useful, pygobject: and is usable to write moderately complex programs. pygobject: pygobject: pygobject's home page: http://www.pygtk.org/ pygobject: pygobject: pygobject: pygobject: PACKAGE NAME: pygtk-2.22.0-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 1660 K PACKAGE SIZE (uncompressed): 16470 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pygtk: pygtk (GTK+ bindings for Python) pygtk: pygtk: PyGTK provides a convenient wrapper for the GTK+ library for use in pygtk: Python programs, taking care of many of the boring details such as pygtk: managing memory and type casting. pygtk: pygtk: PyGTK's web page: http://www.pygtk.org/ pygtk: pygtk: pygtk: pygtk: PACKAGE NAME: pyqt4-4.8.3-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 2438 K PACKAGE SIZE (uncompressed): 16800 K PACKAGE REQUIRED: dbus-python,phonon >= 4.3.80,python >= 2.6,qt4 >= 4.6.0 | qt >= 4.6.0,sip >= 4.10 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pyqt4: pyqt4 (Python bindings for Qt4) pyqt4: pyqt4: These are Python bindings for Qt4. pyqt4: pyqt4: http://www.riverbankcomputing.co.uk/software/pyqt pyqt4: pyqt4: pyqt4: Packager: vl70@vector.linux.net on 26-Mar-2011 pyqt4: pyqt4: pyqt4: PACKAGE NAME: pysmbc-1.0.9-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 34 K PACKAGE SIZE (uncompressed): 280 K PACKAGE REQUIRED: python >= 2.6,samba >= 3.2.3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pysmbc|-----handy-ruler------------------------------------------------------| pysmbc: pysmbc (Python bindings for the libsmbclient API) pysmbc: pysmbc: These Python bindings are intended to wrap the libsmbclient API. pysmbc: pysmbc: http://cyberelk.net/tim/software/pysmbc/ pysmbc: pysmbc: pysmbc: Packager: vl70@vector.linux.net on 14-Feb-2011 pysmbc: pysmbc: pysmbc: PACKAGE NAME: python-cddb-1.4-x86_64-4vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 20 K PACKAGE SIZE (uncompressed): 90 K PACKAGE REQUIRED: python >= 2.6 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: python-cddb|-----handy-ruler------------------------------------------------------| python-cddb: python-cddb (CDDB and FreeDB audio CD track info access in Python) python-cddb: python-cddb: This is actually a set of three modules to access the CDDB and FreeDB python-cddb: online databases of audio CD track titles and information. It includes python-cddb: a C extension module to fetch track lengths under Linux, FreeBSD, python-cddb: OpenBSD, Mac OS X, Solaris, and Win32, which is easily ported to other python-cddb: operating systems. python-cddb: python-cddb: http://cddb-py.sourceforge.net/ python-cddb: python-cddb: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: python-mutagen-1.19-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 142 K PACKAGE SIZE (uncompressed): 1140 K PACKAGE REQUIRED: python >= 2.6 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: python-mutagen|-----handy-ruler------------------------------------------------------| python-mutagen: python-mutagen (A Python module to handle audio metadata) python-mutagen: python-mutagen: Mutagen is a Python module to handle audio metadata. It supports python-mutagen: reading ID3 (all versions), APEv2, FLAC, and Ogg Vorbis/FLAC/Theora. python-mutagen: It can write ID3v1.1, ID3v2.4, APEv2, FLAC, and Ogg Vorbis/FLAC/Theora python-mutagen: comments. It can also read MPEG audio and Xing headers, FLAC stream python-mutagen: info blocks, and Ogg Vorbis/FLAC/Theora stream headers. Finally, it python-mutagen: includes a module to handle generic Ogg bitstreams. python-mutagen: python-mutagen: http://code.google.com/p/mutagen/ python-mutagen: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: python-sexy-0.1.9-x86_64-5vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 19 K PACKAGE SIZE (uncompressed): 90 K PACKAGE REQUIRED: libsexy >= 0.1.11,libxml2 >= 2.7.2,python >= 2.6 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: python-sexy: python-sexy (Python bindings to libsexy) python-sexy: python-sexy: sexy-python is a set of Python bindings around libsexy. python-sexy: python-sexy: http://www.chipx86.com/wiki/Libsexy python-sexy: python-sexy: python-sexy: Packager: vl70@vector.linux.net on 14-Feb-2011 python-sexy: python-sexy: python-sexy: PACKAGE NAME: python-sqlite-2.6.0-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 62 K PACKAGE SIZE (uncompressed): 520 K PACKAGE REQUIRED: python >= 2.6,sqlite >= 3.6.3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: python-sqlite|-----handy-ruler------------------------------------------------------| python-sqlite: python-sqlite (DB-API 2.0 interface for SQLite 3.x) python-sqlite: python-sqlite: pysqlite is an interface to the SQLite 3.x embedded relational python-sqlite: database engine. It is almost fully compliant with the Python python-sqlite: database API version 2.0 also exposes the unique features of SQLite. python-sqlite: python-sqlite: http://trac.edgewall.org/wiki/PySqlite python-sqlite: python-sqlite: python-sqlite: Packager: vl70@vector.linux.net on 14-Feb-2011 python-sqlite: PACKAGE NAME: qt-4.7.0_7abde40-x86_64-2.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 23800 K PACKAGE SIZE (uncompressed): 104100 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: qt: Qt (a multi-platform C++ graphical user interface toolkit) qt: qt: Qt is a complete and well-developed object-oriented framework for qt: developing graphical user interface (GUI) applications using C++. qt: qt: qt: qt: qt: qt: Homepage: http://qt.nokia.com qt: PACKAGE NAME: qt3-3.3.8b-x86_64-opt2.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 6122 K PACKAGE SIZE (uncompressed): 31140 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: qt3: Qt3 (a multi-platform C++ graphical user interface toolkit, version 3) qt3: qt3: Qt is a complete and well-developed object-oriented framework for qt3: developing graphical user interface (GUI) applications using C++. qt3: qt3: This release is free only for development of free software for the X qt3: Window System. If you use Qt for developing commercial or other qt3: non-free software, you must have a professional license. Please see qt3: http://www.trolltech.com/purchase.html for information on how to qt3: obtain a professional license. qt3: PACKAGE NAME: readline-5.2-x86_64-4.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 273 K PACKAGE SIZE (uncompressed): 1080 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: readline: readline (line input library with editing features) readline: readline: The GNU Readline library provides a set of functions for use by readline: applications that allow users to edit command lines as they are typed readline: in. Both Emacs and vi editing modes are available. The Readline readline: library includes additional functions to maintain a list of previously readline: entered command lines, to recall and perhaps edit those lines, and readline: perform csh-like history expansion on previous commands. readline: readline: readline: PACKAGE NAME: rtmpdump-2.3-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 93 K PACKAGE SIZE (uncompressed): 300 K PACKAGE REQUIRED: openssl >= 1.0.0 | openssl-solibs >= 1.0.0,zlib >= 1.2.5 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: rtmpdump|-----handy-ruler------------------------------------------------------| rtmpdump: rtmpdump (A toolkit for RTMP streams) rtmpdump: rtmpdump: rtmpdump is a toolkit for RTMP streams. All forms of RTMP are rtmpdump: supported, including rtmp://, rtmpt://, rtmpe://, rtmpte://, rtmpdump: and rtmps://. rtmpdump: rtmpdump: http://rtmpdump.mplayerhq.hu/ rtmpdump: rtmpdump: rtmpdump: Packager: vl70@vector.linux.net on 14-Feb-2011 rtmpdump: PACKAGE NAME: schroedinger-1.0.9-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 318 K PACKAGE SIZE (uncompressed): 1850 K PACKAGE REQUIRED: gstreamer >= 0.10.22,gst-plugins-base >= 0.10.22,liboil >= 0.3.16,orc >= 0.4.3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: schroedinger|-----handy-ruler------------------------------------------------------| schroedinger: schroedinger (Libraries for the high quality Dirac video codec) schroedinger: schroedinger: The Schrödinger project implement portable libraries for the high schroedinger: quality Dirac video codec created by BBC Research and Development. schroedinger: Dirac is a free and open source codec producing very high image schroedinger: quality video. schroedinger: schroedinger: http://www.diracvideo.org/ schroedinger: schroedinger: schroedinger: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: shared-mime-info-0.90-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 380 K PACKAGE SIZE (uncompressed): 3300 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: shared-mime-info: shared-mime-info (MIME database) shared-mime-info: shared-mime-info: This package contains: shared-mime-info: shared-mime-info: The freedesktop.org shared MIME database spec. shared-mime-info: The merged GNOME and KDE databases, in the new format. shared-mime-info: The update-mime-database command, used to install new MIME data. shared-mime-info: shared-mime-info: See http://www.freedesktop.org/standards/shared-mime-info.html for shared-mime-info: more information. shared-mime-info: PACKAGE NAME: slang-2.2.3-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 420 K PACKAGE SIZE (uncompressed): 1870 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: slang: slang (S-Lang interpreter version 2) slang: slang: S-Lang is an interpreted language that was designed from the start slang: to be easily embedded into a program to provide it with a powerful slang: extension language. S-Lang is also a programmer's library that slang: permits a programmer to develop sophisticated platform-independent slang: software. In addition to providing the S-Lang extension language, slang: the library provides facilities for screen management, keymaps, slang: and low-level terminal I/O. slang: slang: PACKAGE NAME: speex-1.2rc1-x86_64-2vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 516 K PACKAGE SIZE (uncompressed): 780 K PACKAGE REQUIRED: libogg >= 1.1.3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: speex: speex (A voice compression format) speex: speex: Speex is a patent-free compression format designed especially for speex: speech. It is specialized for voice communications at low bit-rates in speex: the 2-45 kbps range. Possible applications include Voice over IP speex: (VoIP), Internet audio streaming, audio books, and archiving of speech speex: data (e.g. voice mail). speex: speex: http://www.speex.org/ speex: speex: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: startup-notification-0.10-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 28 K PACKAGE SIZE (uncompressed): 120 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: startup-notification: startup-notification ("busy" cursors support) startup-notification: startup-notification: Adds support for applications to use "busy" cursors while starting up. startup-notification: startup-notification: startup-notification: startup-notification: startup-notification: startup-notification: startup-notification: startup-notification: PACKAGE NAME: svgalib-1.9.25-x86_64-2.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 582 K PACKAGE SIZE (uncompressed): 1580 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: svgalib: svgalib (A low level graphics library for Linux) svgalib: svgalib: This is a low level graphics library for Linux, originally based on svgalib: VGAlib 1.2 by Tommy Frandsen. Support for many more chipsets has svgalib: been added. svgalib: svgalib: svgalib is currently maintained by Matan Ziv-Av. svgalib: svgalib: svgalib: svgalib: PACKAGE NAME: swig-1.3.38-x86_64-2.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 1958 K PACKAGE SIZE (uncompressed): 14540 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: swig: swig (Simplified Wrapper and Interface Generator) swig: swig: SWIG is an interface compiler that connects programs written in C and swig: C++ with scripting languages such as Perl, Python, Ruby, and Tcl. It swig: works by taking the declarations found in C/C++ header files and using swig: them to generate the wrapper code that scripting languages need to swig: access the underlying C/C++ code. In addition, SWIG provides a variety swig: of customization features that let you tailor the wrapping process to swig: suit your application. swig: swig: PACKAGE NAME: system-config-printer-1.2.7-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 621 K PACKAGE SIZE (uncompressed): 4630 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: system-config-printer: system-config-printer (CUPS printer administration tool) system-config-printer: system-config-printer: The purpose of the tool is to configure a CUPS server (often the local system-config-printer: machine) using the CUPS API. The tool is written in Python, using system-config-printer: pygtk for the graphical parts and Python bindings (pycups) for the system-config-printer: CUPS API. It is largely the same as using the CUPS web interface for system-config-printer: configuring printers, but has the advantage of being a native system-config-printer: application rather than a web page. system-config-printer: system-config-printer: Home: http://cyberelk.net/tim/software/system-config-printer/ system-config-printer: PACKAGE NAME: t1lib-5.1.2-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 910 K PACKAGE SIZE (uncompressed): 1580 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: t1lib: t1lib (Type 1 font rasterizer library) t1lib: t1lib: t1lib is a library distributed under the GNU General Public Library t1lib: License for generating character and string glyphs from Adobe Type 1 t1lib: fonts under UNIX. t1lib uses most of the code of the X11 rasterizer t1lib: donated by IBM to the X11 project. t1lib: t1lib: t1lib: t1lib: t1lib: PACKAGE NAME: totem-pl-parser-2.32.2-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 176 K PACKAGE SIZE (uncompressed): 1180 K PACKAGE REQUIRED: evolution-data-server >= 2.26.0,gmime >= 2.4.20,gtk+2 >= 2.16.0 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: totem-pl-parser: totem-pl-parser (Totem Playlist Parser library) totem-pl-parser: totem-pl-parser: A library to parse and save playlists, as used in music and movie totem-pl-parser: players. totem-pl-parser: totem-pl-parser: http://www.gnome.org/projects/totem/ totem-pl-parser: totem-pl-parser: totem-pl-parser: Packager: vl70@vector.linux.net on 26-Mar-2011 totem-pl-parser: totem-pl-parser: PACKAGE NAME: twolame-0.3.12-x86_64-3vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 98 K PACKAGE SIZE (uncompressed): 520 K PACKAGE REQUIRED: flac >= 1.1.2,libsndfile >= 1.0.17 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: twolame: twolame (A optimized MPEG Audio Layer 2 (MP2) encoder) twolame: twolame: TwoLAME is an optimized MPEG Audio Layer 2 encoder. It is based on twolame: tooLAME by Mike Cheng, which in turn is based upon the ISO dist10 twolame: code and portions of LAME. twolame: Because of patent issues surrounding the MPEG Audio Layer 3 (MP3) twolame: encoders, the ability of most MPEG Audio players to play layer 2 twolame: files, and the similarity in command-line syntax and API, TwoLAME twolame: makes a very good drop-in replacement for LAME or other layer 3 twolame: encoders. twolame: http://www.twolame.org/ Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: vte-0.26.2-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 370 K PACKAGE SIZE (uncompressed): 2220 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: vte: vte (terminal emulator widget) vte: vte: VTE is a terminal emulator widget for use with GTK+. This package vte: contains the VTE library and development files and a sample vte: implementation (vte). vte: vte: VTE is used by XFce. vte: vte: vte: vte: PACKAGE NAME: wavpack-4.60.1-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 118 K PACKAGE SIZE (uncompressed): 340 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: wavpack: wavpack (A lossless WAV file compressor) wavpack: wavpack: Wavpack is a hybrid lossless wavefile compressor. Wavfile is wavpack: Copyright (c) 1998 - 2006 Conifer Software. All Rights Reserved. wavpack: wavpack: Wavpack is distributed under the BSD Software License. wavpack: wavpack: Visit the wavpack project online: http://www.wavpack.com wavpack: wavpack: wavpack: PACKAGE NAME: webkitgtk-1.3.11-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 4948 K PACKAGE SIZE (uncompressed): 29100 K PACKAGE REQUIRED: freetype >= 2.3.9,geoclue >= 0.11.1,gstreamer >= 0.10.24,gtk+2 >= 2.18.0,icu >= 4.2,libpng >= 1.4.0,libsoup >= 2.28.0,sqlite >= 3.6.14 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: webkitgtk: webkitgtk (GTK+ Web content engine library) webkitgtk: webkitgtk: WebKit is an open-source Web content engine library. This package webkitgtk: contains the shared libraries for the WebKit GTK+ port as well as webkitgtk: the sample GtkLauncher tool. webkitgtk: webkitgtk: http://webkit.org/ webkitgtk: webkitgtk: webkitgtk: Packager: vl70@vector.linux.net on 26-Mar-2011 webkitgtk: PACKAGE NAME: wv-1.2.7-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 201 K PACKAGE SIZE (uncompressed): 1220 K PACKAGE REQUIRED: glib2 >= 2.18.2,libgsf >= 1.14.10,libwmf >= 0.2.8.4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: wv|-----handy-ruler------------------------------------------------------| wv: wv (MSWord 6/7/8/9 binary file format to HTML converter) wv: wv: Wv is a program that understands the Microsoft Word 6/7/8/9 binary wv: file format and is able to convert Word documents into HTML, which wv: can then be read with a browser. wv: wv: http://wvware.sourceforge.net wv: wv: wv: Packager: vl70@vector.linux.net on 14-Feb-2011 wv: PACKAGE NAME: wv2-0.4.2-x86_64-1.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 256 K PACKAGE SIZE (uncompressed): 1290 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: wv2: wv2 (MS Word document import library) wv2: wv2: wv2 is a portable MS Word .doc import filter that is used by KWord. wv2: Currently, it supports MS Word 6, MS Word 95, MS Word 97, MS Word wv2: 2000, and MS Word 2002 (XP) documents. Older versions like Word 2, 3, wv2: 4, and 5 aren't supported yet, but might be in the future. wv2: wv2: wv2's authors are Shaheed Haque, Werner Trobin, and David Faure. wv2: wv2: wv2: PACKAGE NAME: x264-20110214-x86_64-1vl70.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 960 K PACKAGE SIZE (uncompressed): 6600 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: x264: x264 (Library for encoding and decoding H264/AVC video streams) x264: x264: x264 is a free library for encoding H264/AVC video streams, written x264: from scratch. x264: x264: http://www.videolan.org/developers/x264.html x264: x264: x264: Packager: vl70@vector.linux.net on 14-Feb-2011 x264: x264: PACKAGE NAME: zlib-1.2.5-x86_64-4.txz PACKAGE LOCATION: ./l PACKAGE SIZE (compressed): 94 K PACKAGE SIZE (uncompressed): 400 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: zlib: zlib (compression library) zlib: zlib: zlib is a general purpose thread safe data compression library. The zlib: data format used by the zlib library is described by RFCs 1950 to zlib: 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt (zlib format) zlib: rfc1951.txt (deflate format) and rfc1952.txt (gzip format). zlib: zlib: zlib: zlib: zlib: PACKAGE NAME: autofs-5.0.5-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 297 K PACKAGE SIZE (uncompressed): 1640 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: autofs: autofs (kernel-based automounter) autofs: autofs: autofs is a kernel-based automounter for Linux. It performs a job autofs: similar to amd(8) but relies on a small stub of kernel code instead of autofs: pretending to be an NFS server. The result is simpler code, better autofs: reliability, and much faster operation in the common case (everything autofs: already mounted.) autofs: autofs: autofs: autofs: PACKAGE NAME: bind-9.7.3-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 1829 K PACKAGE SIZE (uncompressed): 6910 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: bind: bind (DNS server and utilities) bind: bind: The named daemon and support utilities such as dig, host, and bind: nslookup. Sample configuration files for running a simple caching bind: nameserver are included. Documentation for advanced name server bind: setup can be found in /usr/doc/bind-9.x.x/. bind: bind: bind: bind: bind: PACKAGE NAME: bluez-4.89-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 500 K PACKAGE SIZE (uncompressed): 1900 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: bluez: bluez (Bluetooth libraries and utilities) bluez: bluez: Bluez is the Bluetooth stack for Linux, allowing Bluetooth adaptors bluez: and devices to be used with Linux. This package contains the Bluez bluez: libraries, utilities, and other support files. bluez: bluez: For more info, visit: http://www.bluez.org bluez: bluez: bluez: bluez: PACKAGE NAME: bluez-firmware-1.2-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 70 K PACKAGE SIZE (uncompressed): 170 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: bluez-firmware: bluez-firmware (Bluetooth(TM) firmware) bluez-firmware: bluez-firmware: The bluez-firmware package contains firmware needed by various bluez-firmware: chipsets to support Bluetooth(TM) on Linux. bluez-firmware: bluez-firmware: For more info, visit: http://www.bluez.org bluez-firmware: bluez-firmware: bluez-firmware: bluez-firmware: bluez-firmware: PACKAGE NAME: bluez-hcidump-2.0-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 90 K PACKAGE SIZE (uncompressed): 280 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: bluez-hcidump: bluez-hcidump (Bluetooth analyzer) bluez-hcidump: bluez-hcidump: The bluez-hcidump package contains a network analyzer for Bluetooth. bluez-hcidump: This utility (hcidump) utility reads raw HCI data coming from and bluez-hcidump: going to a Bluetooth device and prints commands, events and data. bluez-hcidump: bluez-hcidump: For more info, visit: http://www.bluez.org bluez-hcidump: bluez-hcidump: bluez-hcidump: bluez-hcidump: PACKAGE NAME: curl-7.20.1-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 649 K PACKAGE SIZE (uncompressed): 2240 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: curl: curl (command line URL data transfer tool) curl: curl: Curl is a command line tool for transferring data specified with URL curl: syntax. The command is designed to work without user interaction or curl: any kind of interactivity. Curl offers a busload of useful tricks curl: like proxy support, user authentication, ftp upload, HTTP post, SSL curl: (https:) connections, cookies, file transfer resume and more. curl: curl: libcurl is a library that Curl uses to do its job. It is readily curl: available to be used by your software, too. curl: PACKAGE NAME: cyrus-sasl-2.1.23-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 403 K PACKAGE SIZE (uncompressed): 1700 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: cyrus-sasl: cyrus-sasl (Simple Authentication and Security Layer) cyrus-sasl: cyrus-sasl: This is the Cyrus SASL library. Cyrus SASL is used by mail programs cyrus-sasl: on the client or server side to provide authentication and cyrus-sasl: authorization services. See RFC 2222 for more information. cyrus-sasl: cyrus-sasl: cyrus-sasl: cyrus-sasl: cyrus-sasl: cyrus-sasl: PACKAGE NAME: dhcpcd-5.2.11-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 61 K PACKAGE SIZE (uncompressed): 150 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: dhcpcd: dhcpcd (DHCP client daemon) dhcpcd: dhcpcd: The DHCP client program dhcpcd is used to connect to a network by dhcpcd: contacting a DHCP server. dhcpcd gets an IP address and other dhcpcd: information from a corresponding DHCP server, configures the network dhcpcd: interface automatically, and tries to renew the lease time according dhcpcd: to RFC2131 or RFC1541 depending on the command line option. dhcpcd: dhcpcd: dhcpcd: dhcpcd: PACKAGE NAME: firefox-3.6.16-x86_64-1vl70.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 914 K PACKAGE SIZE (uncompressed): 3720 K PACKAGE REQUIRED: atk >= 1.26.0,cairo >= 1.8.6,glib2 >= 2.20.1,gtk+2 >= 2.16.2,hunspell >= 1.2.8,lcms >= 1.18,libidl >= 0.8.10,nspr >= 4.7.3,nss >= 3.12.2.0,pango >= 1.24.1,sqlite >= 3.6.22,xulrunner >= 1.9.2,zlib >= 1.2.3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: firefox: firefox (Mozilla Firefox Web browser) firefox: firefox: This project is a redesign of the Mozilla browser component written firefox: using the XUL user interface language. Firefox empowers you to firefox: browse faster, more safely and more efficiently than with any other firefox: browser. firefox: firefox: Visit the Mozilla Firefox project online: firefox: http://www.mozilla.org/projects/firefox/ firefox: firefox: Packager: vl70@vector.linux.net on 26-Mar-2011 PACKAGE NAME: gnupg2-2.0.17-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 1560 K PACKAGE SIZE (uncompressed): 7690 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gnupg2: GnuPG2 (The GNU Privacy Guard version 2.x) gnupg2: gnupg2: GnuPG is GNU's tool for secure communication and data storage. It can gnupg2: be used to encrypt data and to create digital signatures. It includes gnupg2: an advanced key management facility and is compliant with the proposed gnupg2: OpenPGP Internet standard as described in RFC2440 and the S/MIME gnupg2: standard as described by several RFCs. gnupg2: gnupg2: GnuPG 2.0 is the stable version of GnuPG integrating support for gnupg2: OpenPGP and S/MIME. It does not conflict with an installed 1.4.x gnupg2: OpenPGP-only version. PACKAGE NAME: gnutls-2.10.5-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 1539 K PACKAGE SIZE (uncompressed): 3750 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gnutls: gnutls (GNU TLS library) gnutls: gnutls: This is a TLS (Transport Layer Security) 1.0 and SSL (Secure Sockets gnutls: Layer) 3.0 implementation. In brief, GnuTLS can be described as a gnutls: library which offers an API to access secure communication protocols. gnutls: These protocols provide privacy over insecure lines, and were designed gnutls: to prevent eavesdropping, tampering, or message forgery. gnutls: gnutls: Homepage: http://www.gnu.org/software/gnutls/ gnutls: gnutls: PACKAGE NAME: gpgme-1.3.0-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 239 K PACKAGE SIZE (uncompressed): 1000 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gpgme: gpgme (GnuPG Made Easy) gpgme: gpgme: GPGME (GnuPG Made Easy) is a C language library that allows to add gpgme: support for cryptography to a program. It is designed to make access gpgme: to public key crypto engines like GnuPG or GpgSM easier for gpgme: applications. GPGME provides a high-level crypto API for encryption, gpgme: decryption, signing, signature verification and key management. gpgme: gpgme: GPGME uses GnuPG and GpgSM as its backends to support OpenPGP and the gpgme: Cryptographic Message Syntax (CMS). gpgme: PACKAGE NAME: inetd-1.79s-x86_64-8.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 20 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: inetd: inetd (Internet super-server) inetd: inetd: This is a program to listen for connections on certain Internet inetd: sockets and invokes a program to service the request. Essentially, inetd: inetd allows running one daemon to invoke several others, reducing inetd: load on the system. Many of the network services are run through inetd: inetd, so you'll probably need it. inetd: inetd: This version of inetd was ported from OpenBSD. inetd: inetd: PACKAGE NAME: iptables-1.4.10-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 287 K PACKAGE SIZE (uncompressed): 1460 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: iptables: iptables (IP packet filter administration) iptables: iptables: iptables is a packet filter administration tool. iptables: iptables: Iptables can be used to build internet firewalls based on stateless iptables: and stateful packet filtering, use NAT and masquerading for sharing iptables: internet access if you don't have enough public IP addresses, use NAT iptables: to implement transparent proxies, aid the tc and iproute2 systems iptables: used to build sophisticated QoS and policy routers, do further packet iptables: manipulation (mangling) like altering the TOS/DSCP/ECN bits of the IP iptables: header, and much more. See: http://www.netfilter.org PACKAGE NAME: libassuan-2.0.1-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 100 K PACKAGE SIZE (uncompressed): 250 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libassuan: libassuan (Interprocess Communication Library for GPG) libassuan: libassuan: This is the IPC library used by GnuPG 2.x, GPGME and a few other libassuan: packages. libassuan: libassuan: libassuan: libassuan: libassuan: libassuan: libassuan: PACKAGE NAME: libgcrypt-1.4.6-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 390 K PACKAGE SIZE (uncompressed): 1690 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libgcrypt: libgcrypt (General purpose crypto library) libgcrypt: libgcrypt: Libgcrypt is a general purpose crypto library based on the code libgcrypt: used in GnuPG. libgcrypt: libgcrypt: libgcrypt: libgcrypt: libgcrypt: libgcrypt: libgcrypt: PACKAGE NAME: libgpg-error-1.9-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 81 K PACKAGE SIZE (uncompressed): 480 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libgpg-error: libgpg-error (GnuPG Error Definitions Library) libgpg-error: libgpg-error: This is a library that defines common error values for all GnuPG libgpg-error: components. Among these are GPG, GPGSM, GPGME, GPG-Agent, libgpg-error: libgcrypt, Libksba, DirMngr, Pinentry, SmartCard Daemon, and more. libgpg-error: libgpg-error: libgpg-error: libgpg-error: libgpg-error: libgpg-error: PACKAGE NAME: libksba-1.2.0-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 130 K PACKAGE SIZE (uncompressed): 370 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libksba: libksba (X.509 & CMS library for S/MIME and TLS) libksba: libksba: KSBA (pronounced Kasbah) is a library to make X.509 certificates as libksba: well as the CMS easily accessible by other applications. libksba: Both specifications are building blocks of S/MIME and TLS. libksba: libksba: libksba: libksba: libksba: libksba: PACKAGE NAME: ndiswrapper-r2728_2.6.37.4-x86_64-1vl70.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 114 K PACKAGE SIZE (uncompressed): 530 K PACKAGE REQUIRED: glibc-solibs >= 2.13,perl >= 5.12.3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: ndiswrapper: ndiswrapper () ndiswrapper: ndiswrapper: ndiswrapper: ndiswrapper: ndiswrapper: ndiswrapper: ndiswrapper: License: GPL ndiswrapper: Authors: ndiswrapper: Website: PACKAGE NAME: net-tools-1.60-x86_64-3.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 116 K PACKAGE SIZE (uncompressed): 470 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: net-tools: net-tools (base Linux networking utilities) net-tools: net-tools: This is the core collection of tools such as "ifconfig" and "route" net-tools: used to configure networking on Linux. You won't be able to do much net-tools: networking without this package and the network-scripts. net-tools: net-tools: The net-tools package was maintained for many years by Phil Blundell net-tools: and Bernd Eckenfels. net-tools: net-tools: net-tools: PACKAGE NAME: network-scripts-13.0-noarch-3.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 19 K PACKAGE SIZE (uncompressed): 80 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: network-scripts: network-scripts (Scripts to configure a network) network-scripts: network-scripts: These are the basic scripts and files used to define a network and network-scripts: configure network interfaces on Linux. Most of the original network-scripts: /etc files were written by Fred N. van Kempen, or borrowed from BSD. network-scripts: The rc.inet1 and rc.inet2 scripts were mostly written by Patrick network-scripts: Volkerding, with suggestions and fixes from hundreds of contributors network-scripts: over the years. network-scripts: network-scripts: network-scripts: PACKAGE NAME: nfs-utils-1.2.3-x86_64-2.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 203 K PACKAGE SIZE (uncompressed): 710 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: nfs-utils: nfs-utils (Network File System daemons and utilities) nfs-utils: nfs-utils: The nfs-utils package contains the necessary daemons and utilities to nfs-utils: run an NFS server on Linux. nfs-utils: nfs-utils: You'll also need the portmap package to use NFS. nfs-utils: nfs-utils: nfs-utils: nfs-utils: nfs-utils: PACKAGE NAME: openldap-client-2.4.23-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 381 K PACKAGE SIZE (uncompressed): 1580 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: openldap-client: openldap-client (OpenLDAP client programs) openldap-client: openldap-client: OpenLDAP is an open source implementation of the Lightweight openldap-client: Directory Access Protocol. LDAP is a alternative to the X.500 openldap-client: Directory Access Protocol (DAP). It uses the TCP/IP stack versus openldap-client: the overly complex OSI stack. openldap-client: openldap-client: LDAP is often used to provide authentication (such as for email). openldap-client: openldap-client: The OpenLDAP homepage is http://www.openldap.org/ openldap-client: PACKAGE NAME: openssh-5.8p1-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 574 K PACKAGE SIZE (uncompressed): 2560 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: openssh: openssh (Secure Shell daemon and clients) openssh: openssh: ssh (Secure Shell) is a program for logging into a remote machine and openssh: for executing commands on a remote machine. It is intended to replace openssh: rlogin and rsh, and provide secure encrypted communications between openssh: two untrusted hosts over an insecure network. sshd (SSH Daemon) is openssh: the daemon program for ssh. OpenSSH is based on the last free version openssh: of Tatu Ylonen's SSH, further enhanced and cleaned up by Aaron openssh: Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo de Raadt, and openssh: Dug Song. It has a homepage at http://www.openssh.com/ openssh: PACKAGE NAME: openssl-0.9.8r-x86_64-2.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 2361 K PACKAGE SIZE (uncompressed): 10550 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: openssl: openssl (Secure Sockets Layer toolkit) openssl: openssl: The OpenSSL certificate management tool and the shared libraries that openssl: provide various encryption and decryption algorithms and protocols. openssl: openssl: This product includes software developed by the OpenSSL Project for openssl: use in the OpenSSL Toolkit (http://www.openssl.org). This product openssl: includes cryptographic software written by Eric Young openssl: (eay@cryptsoft.com). This product includes software written by Tim openssl: Hudson (tjh@cryptsoft.com). openssl: PACKAGE NAME: opera-11.01.1190-x86_64-1vl70.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 10387 K PACKAGE SIZE (uncompressed): 33330 K PACKAGE REQUIRED: freetype >= 2.8.0,gst-plugins-good >= 0.10.22,libXext >= 1.1.1,libXt >= 1.0.8 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: opera: Opera (Opera internet application suite) opera: opera: Opera is an freeware, lightweight Qt internet application suite opera: containing a browser, and clients for email, RSS, and IRC. opera: opera: http://www.opera.com/ opera: opera: opera: Packager: vl70@vector.linux.net on 14-Feb-2011 opera: opera: PACKAGE NAME: pidentd-3.0.19-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 41 K PACKAGE SIZE (uncompressed): 150 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pidentd: pidentd (TCP/IP IDENT protocol server) pidentd: pidentd: The identd daemon implements the IDENT protocol as specified in pidentd: RFC1413. When your machine connects to a remote system, the remote pidentd: machine may connect to your identd daemon to find out either the pidentd: user name or other information about the process that initiated pidentd: the connection. Some remote machines may choose not to allow your pidentd: connections if you do not provide access to an identd daemon. pidentd: pidentd: The pidentd daemon was written by Peter Eriksson. pidentd: PACKAGE NAME: pidgin-2.7.11-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 7076 K PACKAGE SIZE (uncompressed): 35780 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pidgin: pidgin (GTK+ instant messaging program) pidgin: pidgin: Pidgin allows you to talk to anyone using a variety of messaging pidgin: protocols, including AIM (Oscar and TOC), ICQ, IRC, Yahoo!, MSN pidgin: Messenger, Jabber, Gadu-Gadu, Napster, and Zephyr. These protocols pidgin: are implemented using a modular, easy to use design. To use a pidgin: protocol, just load the plugin for it. pidgin: pidgin: For more info, see: http://www.pidgin.im pidgin: pidgin: PACKAGE NAME: portmap-6.0-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 26 K PACKAGE SIZE (uncompressed): 90 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: portmap: portmap (a daemon to manage RPC connections) portmap: portmap: The portmapper (/sbin/rpc.portmap) is a network daemon used to manage portmap: connections to RPC services. Daemons that offer RPC services (such portmap: as the daemons for NFS) tell the portmapper on what port they listen. portmap: Unlike the services registered with the inetd, RPC network port portmap: numbers may change each time the system is booted. portmap: portmap: The portmapper is required to use NFS or other RPC services. portmap: portmap: PACKAGE NAME: ppp-2.4.5-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 359 K PACKAGE SIZE (uncompressed): 1250 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: ppp: ppp (Point-to-Point Protocol) ppp: ppp: The Point-to-Point Protocol (PPP) provides a method for transmitting ppp: data over serial links. It's commonly used for connecting to the ppp: Internet using a modem. This package includes the PPP daemon (pppd), ppp: which negotiates with the peer to establish the link and sets up the ppp: ppp network interface, and pppsetup, an easy-to-use utility for ppp: setting up your PPP daemon. ppp: ppp: ppp: PACKAGE NAME: procmail-3.22-x86_64-2.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 129 K PACKAGE SIZE (uncompressed): 330 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: procmail: procmail (mail processing and local delivery program) procmail: procmail: Can be used to create mail-servers, mailing lists, sort your incoming procmail: mail into separate folders/files (real convenient when subscribing to procmail: one or more mailing lists or for prioritizing your mail), preprocess procmail: your mail, start any programs upon mail arrival (e.g. to generate procmail: different chimes on your workstation for different types of mail) or procmail: selectively forward certain incoming mail automatically to someone. procmail: Procmail is required by sendmail to deliver the local mail. procmail: The author of procmail is Stephen R. van den Berg. procmail: PACKAGE NAME: pth-2.0.7-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 98 K PACKAGE SIZE (uncompressed): 280 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pth: pth (GNU Portable Threads) pth: pth: Pth is a very portable POSIX/ANSI-C based library for Unix platforms pth: which provides non-preemptive priority-based scheduling for multiple pth: threads of execution (aka `multithreading') inside event-driven pth: applications. All threads run in the same address space of the pth: server application, but each thread has its own individual pth: program-counter, run-time stack, signal mask and errno variable. pth: pth: pth: PACKAGE NAME: rp-pppoe-3.10-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 82 K PACKAGE SIZE (uncompressed): 290 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: rp-pppoe: rp-pppoe (Roaring Penguin PPPoE client) rp-pppoe: rp-pppoe: PPPoE (Point-to-Point Protocol over Ethernet) is a protocol used by rp-pppoe: many ADSL Internet Service Providers. Roaring Penguin has a free rp-pppoe: client for Linux systems to connect to PPPoE service providers. rp-pppoe: rp-pppoe: The client is a user-mode program and does not require any kernel rp-pppoe: modifications. It is fully compliant with RFC 2516, the official rp-pppoe: PPPoE specification. rp-pppoe: rp-pppoe: PACKAGE NAME: rsync-3.0.7-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 264 K PACKAGE SIZE (uncompressed): 570 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: rsync: rsync (remote file sync) rsync: rsync: rsync is a replacement for rcp that has many more features. It rsync: uses the "rsync algorithm" which provides a very fast method for rsync: bringing remote files into sync. It does this by sending just the rsync: differences in the files across the link, without requiring that both rsync: sets of files are present at one of the ends of the link beforehand. rsync: rsync: rsync was written by Andrew Tridgell and Paul Mackerras. rsync: rsync: PACKAGE NAME: samba-3.5.8-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 13724 K PACKAGE SIZE (uncompressed): 135580 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: samba: samba (SMB/CIFS file and print server) samba: samba: Samba is an SMB/CIFS file and print server for SMB and CIFS clients. samba: It allows you to make file space or printers on a Samba host samba: available to SMB/CIFS clients (such as PCs running Windows). samba: samba: If you have any Windows file servers, you may be able to replace them samba: or supplement them with Samba. One of Samba's big strengths is samba: integration, so you can use it to tie together your Linux hosts and samba: Windows PC clients. samba: PACKAGE NAME: tcpdump-4.1.1-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 367 K PACKAGE SIZE (uncompressed): 1010 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: tcpdump: tcpdump (network monitoring tool) tcpdump: tcpdump: Tcpdump is a tool for network monitoring and data acquisition. You tcpdump: can use it to dump information on all the packets on a network that tcpdump: match a boolean expression. Tcpdump uses libpcap, a system tcpdump: independent interface for user-level packet capture. tcpdump: tcpdump: Project homepage: http://sourceforge.net/projects/tcpdump/ tcpdump: tcpdump: tcpdump: PACKAGE NAME: traceroute-2.0.14-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 46 K PACKAGE SIZE (uncompressed): 150 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: traceroute: traceroute (IP packet route tracing utility) traceroute: traceroute: The traceroute utility displays the route used by IP packets on their traceroute: way to a specified network host. Traceroute will display the IP traceroute: number and host name (if possible) of all the machines along the route traceroute: taken by the packets. If you're having network connectivity problems, traceroute: traceroute can show you where the trouble is located. traceroute: traceroute: traceroute: traceroute: PACKAGE NAME: wget-1.12-x86_64-1.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 434 K PACKAGE SIZE (uncompressed): 1960 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: wget: wget (a non-interactive network retriever) wget: wget: GNU Wget is a free network utility to retrieve files from the wget: World Wide Web using HTTP and FTP, the two most widely used Internet wget: protocols. It works non-interactively, thus enabling work in the wget: background after having logged off. wget: wget: The author of Wget is Hrvoje Niksic . wget: wget: wget: PACKAGE NAME: wicd-1.7.0-x86_64-1vl70.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 350 K PACKAGE SIZE (uncompressed): 2010 K PACKAGE REQUIRED: python >= 2.7.1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: wicd: wicd () wicd: wicd: wicd: wicd: wicd: wicd: wicd: License: GPL wicd: Authors: wicd: Website: PACKAGE NAME: wireless-tools-29-x86_64-6.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 127 K PACKAGE SIZE (uncompressed): 510 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: wireless-tools: wireless-tools (utilities for wireless networking) wireless-tools: wireless-tools: This package contains tools and a library used for configuring wireless-tools: wireless networking interfaces: wireless-tools: iwconfig (the main wireless tool), iwlist (display more detailed wireless-tools: information than iwconfig), iwspy (get stats per MAC address and wireless-tools: more), iwpriv (set driver private ioctls), iwgetid (show the wireless-tools: ESSID or NWID of a device), iwevent (display wireless events), wireless-tools: ifrename (rename a network interface). wireless-tools: wireless-tools: The wireless-tools were written by Jean Tourrilhes. PACKAGE NAME: wpa_supplicant-0.7.3-x86_64-3.txz PACKAGE LOCATION: ./n PACKAGE SIZE (compressed): 525 K PACKAGE SIZE (uncompressed): 1550 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: wpa_supplicant: wpa_supplicant (WPA/WPA2/IEEE 802.1X Supplicant) wpa_supplicant: wpa_supplicant: wpa_supplicant is a WPA Supplicant for Linux with support for WPA and wpa_supplicant: WPA2 (IEEE 802.11i / RSN). Supplicant is the IEEE 802.1X/WPA wpa_supplicant: component that is used in the client stations. It implements key wpa_supplicant: negotiation with a WPA Authenticator and it controls the roaming and wpa_supplicant: IEEE 802.11 authentication/association of the wlan driver. wpa_supplicant: wpa_supplicant: More info: http://hostap.epitest.fi/wpa_supplicant/ wpa_supplicant: wpa_supplicant: PACKAGE NAME: expect-5.44.1.15-x86_64-1.txz PACKAGE LOCATION: ./tcl PACKAGE SIZE (compressed): 294 K PACKAGE SIZE (uncompressed): 1030 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: expect: expect (program that talks to other interactive programs) expect: expect: Expect is a program that talks to other interactive programs according expect: to a script. Following the script, Expect knows what can be expected expect: from a program and what the correct response should be. An expect: interpreted language provides branching and high-level control expect: structures to direct the dialogue. expect: expect: Expect was written by Don Libes of the National Institute of Standards expect: and Technology. expect: PACKAGE NAME: tcl-8.5.9-x86_64-1.txz PACKAGE LOCATION: ./tcl PACKAGE SIZE (compressed): 1686 K PACKAGE SIZE (uncompressed): 5310 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: tcl: tcl (Tool Command Language) tcl: tcl: Tcl, developed by Dr. John Ousterhout, is a simple to use text-based tcl: script language with many built-in features which make it especially tcl: nice for writing interactive scripts. tcl: tcl: tcl: tcl: tcl: tcl: PACKAGE NAME: tclx-8.4-x86_64-3.txz PACKAGE LOCATION: ./tcl PACKAGE SIZE (compressed): 110 K PACKAGE SIZE (uncompressed): 310 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: tclx: tclx (Extended Tcl) tclx: tclx: Extended Tcl (TclX), is a set of extensions to Tcl, the Tool Command tclx: Language invented by Dr. John Ousterhout. Extended Tcl is oriented tclx: towards Unix system programming tasks and large application tclx: development. Many additional interfaces to the Unix operating system tclx: are provided. Extended Tcl was designed and implemented by Karl tclx: Lehenbauer (karl@NeoSoft.com) and Mark Diekhans (markd@Grizzly.com), tclx: with help in the early stages from Peter da Silva (peter@NeoSoft.com). tclx: tclx: PACKAGE NAME: tk-8.5.9-x86_64-1.txz PACKAGE LOCATION: ./tcl PACKAGE SIZE (compressed): 1634 K PACKAGE SIZE (uncompressed): 4450 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: tk: tk (Tk toolkit for Tcl) tk: tk: Tk is an extension to Tcl that allows you to quickly and easily build tk: X11 applications that have the look and feel of Motif apps. tk: tk: tk: tk: tk: tk: tk: PACKAGE NAME: VL_Theme-0.1-noarch-11vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 12951 K PACKAGE SIZE (uncompressed): 44190 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: VL_Theme: Theme for VectorLinux VL_Theme: everything from lilo, Grub to KDM, GDM VL_Theme: enjoy VL_Theme: PACKAGE NAME: appres-1.0.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 14 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: appres: appres appres: appres: appres is part of X11. appres: appres: For more information about the X.Org Foundation (the providers of the appres: X.Org implementation of the X Window System), see their website: appres: appres: http://www.x.org appres: appres: appres: PACKAGE NAME: bdftopcf-1.0.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 13 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: bdftopcf: bdftopcf bdftopcf: bdftopcf: bdftopcf is part of X11. bdftopcf: bdftopcf: For more information about the X.Org Foundation (the providers of the bdftopcf: X.Org implementation of the X Window System), see their website: bdftopcf: bdftopcf: http://www.x.org bdftopcf: bdftopcf: bdftopcf: PACKAGE NAME: beforelight-1.0.4-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 15 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: beforelight: beforelight beforelight: beforelight: beforelight is part of X11. beforelight: beforelight: For more information about the X.Org Foundation (the providers of the beforelight: X.Org implementation of the X Window System), see their website: beforelight: beforelight: http://www.x.org beforelight: beforelight: beforelight: PACKAGE NAME: bigreqsproto-1.1.1-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 13 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: bigreqsproto: bigreqsproto bigreqsproto: bigreqsproto: bigreqsproto is part of X11. bigreqsproto: bigreqsproto: For more information about the X.Org Foundation (the providers of the bigreqsproto: X.Org implementation of the X Window System), see their website: bigreqsproto: bigreqsproto: http://www.x.org bigreqsproto: bigreqsproto: bigreqsproto: PACKAGE NAME: bitmap-1.0.5-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 58 K PACKAGE SIZE (uncompressed): 200 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: bitmap: bitmap bitmap: bitmap: bitmap is part of X11. bitmap: bitmap: For more information about the X.Org Foundation (the providers of the bitmap: X.Org implementation of the X Window System), see their website: bitmap: bitmap: http://www.x.org bitmap: bitmap: bitmap: PACKAGE NAME: compiz-0.8.8-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 735 K PACKAGE SIZE (uncompressed): 5190 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: compiz: compiz compiz: compiz: compiz is part of X11. compiz: compiz: For more information about the X.Org Foundation (the providers of the compiz: X.Org implementation of the X Window System), see their website: compiz: compiz: http://www.x.org compiz: compiz: compiz: PACKAGE NAME: compositeproto-0.4.2-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 15 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: compositeproto: compositeproto compositeproto: compositeproto: compositeproto is part of X11. compositeproto: compositeproto: For more information about the X.Org Foundation (the providers of the compositeproto: X.Org implementation of the X Window System), see their website: compositeproto: compositeproto: http://www.x.org compositeproto: compositeproto: compositeproto: PACKAGE NAME: damageproto-1.2.1-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 12 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: damageproto: damageproto damageproto: damageproto: damageproto is part of X11. damageproto: damageproto: For more information about the X.Org Foundation (the providers of the damageproto: X.Org implementation of the X Window System), see their website: damageproto: damageproto: http://www.x.org damageproto: damageproto: damageproto: PACKAGE NAME: dejavu-fonts-ttf-2.33-noarch-1.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 2182 K PACKAGE SIZE (uncompressed): 10540 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: dejavu-fonts-ttf: dejavu-fonts-ttf (DejaVu fonts) dejavu-fonts-ttf: dejavu-fonts-ttf: The DejaVu fonts are a font family based on the Bitstream Vera Fonts dejavu-fonts-ttf: (http://gnome.org/fonts/). Its purpose is to provide a wider range dejavu-fonts-ttf: of characters (see http://dejavu.sf.net for more information) while dejavu-fonts-ttf: maintaining the original look and feel. dejavu-fonts-ttf: dejavu-fonts-ttf: DejaVu fonts are based on Bitstream Vera fonts version 1.10. dejavu-fonts-ttf: dejavu-fonts-ttf: dejavu-fonts-ttf: PACKAGE NAME: dmxproto-2.3.1-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 10 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: dmxproto: dmxproto dmxproto: dmxproto: dmxproto is part of X11. dmxproto: dmxproto: For more information about the X.Org Foundation (the providers of the dmxproto: X.Org implementation of the X Window System), see their website: dmxproto: dmxproto: http://www.x.org dmxproto: dmxproto: dmxproto: PACKAGE NAME: dri2proto-2.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 10 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: dri2proto: dri2proto dri2proto: dri2proto: dri2proto is part of X11. dri2proto: dri2proto: For more information about the X.Org Foundation (the providers of the dri2proto: X.Org implementation of the X Window System), see their website: dri2proto: dri2proto: http://www.x.org dri2proto: dri2proto: dri2proto: PACKAGE NAME: editres-1.0.5-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 44 K PACKAGE SIZE (uncompressed): 130 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: editres: editres editres: editres: editres is part of X11. editres: editres: For more information about the X.Org Foundation (the providers of the editres: X.Org implementation of the X Window System), see their website: editres: editres: http://www.x.org editres: editres: editres: PACKAGE NAME: encodings-1.0.4-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 565 K PACKAGE SIZE (uncompressed): 710 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: encodings: encodings encodings: encodings: encodings is part of X11. encodings: encodings: For more information about the X.Org Foundation (the providers of the encodings: X.Org implementation of the X Window System), see their website: encodings: encodings: http://www.x.org encodings: encodings: encodings: PACKAGE NAME: evieext-1.1.1-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 9 K PACKAGE SIZE (uncompressed): 40 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: evieext: evieext evieext: evieext: evieext is part of X11. evieext: evieext: For more information about the X.Org Foundation (the providers of the evieext: X.Org implementation of the X Window System), see their website: evieext: evieext: http://www.x.org evieext: evieext: evieext: PACKAGE NAME: fixesproto-5.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 14 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: fixesproto: fixesproto fixesproto: fixesproto: fixesproto is part of X11. fixesproto: fixesproto: For more information about the X.Org Foundation (the providers of the fixesproto: X.Org implementation of the X Window System), see their website: fixesproto: fixesproto: http://www.x.org fixesproto: fixesproto: fixesproto: PACKAGE NAME: font-adobe-100dpi-1.0.3-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 6040 K PACKAGE SIZE (uncompressed): 7070 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: font-adobe-100dpi: font-adobe-100dpi font-adobe-100dpi: font-adobe-100dpi: font-adobe-100dpi is part of X11. font-adobe-100dpi: font-adobe-100dpi: For more information about the X.Org Foundation (the providers of the font-adobe-100dpi: X.Org implementation of the X Window System), see their website: font-adobe-100dpi: font-adobe-100dpi: http://www.x.org font-adobe-100dpi: font-adobe-100dpi: font-adobe-100dpi: PACKAGE NAME: font-adobe-75dpi-1.0.3-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 5346 K PACKAGE SIZE (uncompressed): 6380 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: font-adobe-75dpi: font-adobe-75dpi font-adobe-75dpi: font-adobe-75dpi: font-adobe-75dpi is part of X11. font-adobe-75dpi: font-adobe-75dpi: For more information about the X.Org Foundation (the providers of the font-adobe-75dpi: X.Org implementation of the X Window System), see their website: font-adobe-75dpi: font-adobe-75dpi: http://www.x.org font-adobe-75dpi: font-adobe-75dpi: font-adobe-75dpi: PACKAGE NAME: font-alias-1.0.3-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 9 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: font-alias: font-alias font-alias: font-alias: font-alias is part of X11. font-alias: font-alias: For more information about the X.Org Foundation (the providers of the font-alias: X.Org implementation of the X Window System), see their website: font-alias: font-alias: http://www.x.org font-alias: font-alias: font-alias: PACKAGE NAME: font-bh-ttf-1.0.3-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 278 K PACKAGE SIZE (uncompressed): 950 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: font-bh-ttf: font-bh-ttf font-bh-ttf: font-bh-ttf: font-bh-ttf is part of X11. font-bh-ttf: font-bh-ttf: For more information about the X.Org Foundation (the providers of the font-bh-ttf: X.Org implementation of the X Window System), see their website: font-bh-ttf: font-bh-ttf: http://www.x.org font-bh-ttf: font-bh-ttf: font-bh-ttf: PACKAGE NAME: font-bh-type1-1.0.3-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 524 K PACKAGE SIZE (uncompressed): 1330 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: font-bh-type1: font-bh-type1 font-bh-type1: font-bh-type1: font-bh-type1 is part of X11. font-bh-type1: font-bh-type1: For more information about the X.Org Foundation (the providers of the font-bh-type1: X.Org implementation of the X Window System), see their website: font-bh-type1: font-bh-type1: http://www.x.org font-bh-type1: font-bh-type1: font-bh-type1: PACKAGE NAME: font-bitstream-type1-1.0.3-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 300 K PACKAGE SIZE (uncompressed): 490 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: font-bitstream-type1: font-bitstream-type1 font-bitstream-type1: font-bitstream-type1: font-bitstream-type1 is part of X11. font-bitstream-type1: font-bitstream-type1: For more information about the X.Org Foundation (the providers of the font-bitstream-type1: X.Org implementation of the X Window System), see their website: font-bitstream-type1: font-bitstream-type1: http://www.x.org font-bitstream-type1: font-bitstream-type1: font-bitstream-type1: PACKAGE NAME: font-cursor-misc-1.0.3-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 13 K PACKAGE SIZE (uncompressed): 40 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: font-cursor-misc: font-cursor-misc font-cursor-misc: font-cursor-misc: font-cursor-misc is part of X11. font-cursor-misc: font-cursor-misc: For more information about the X.Org Foundation (the providers of the font-cursor-misc: X.Org implementation of the X Window System), see their website: font-cursor-misc: font-cursor-misc: http://www.x.org font-cursor-misc: font-cursor-misc: font-cursor-misc: PACKAGE NAME: font-misc-misc-1.1.2-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 3439 K PACKAGE SIZE (uncompressed): 4450 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: font-misc-misc: font-misc-misc font-misc-misc: font-misc-misc: font-misc-misc is part of X11. font-misc-misc: font-misc-misc: For more information about the X.Org Foundation (the providers of the font-misc-misc: X.Org implementation of the X Window System), see their website: font-misc-misc: font-misc-misc: http://www.x.org font-misc-misc: font-misc-misc: font-misc-misc: PACKAGE NAME: font-util-1.2.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 35 K PACKAGE SIZE (uncompressed): 280 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: font-util: font-util font-util: font-util: font-util is part of X11. font-util: font-util: For more information about the X.Org Foundation (the providers of the font-util: X.Org implementation of the X Window System), see their website: font-util: font-util: http://www.x.org font-util: font-util: font-util: PACKAGE NAME: font-xfree86-type1-1.0.4-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 35 K PACKAGE SIZE (uncompressed): 90 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: font-xfree86-type1: font-xfree86-type1 font-xfree86-type1: font-xfree86-type1: font-xfree86-type1 is part of X11. font-xfree86-type1: font-xfree86-type1: For more information about the X.Org Foundation (the providers of the font-xfree86-type1: X.Org implementation of the X Window System), see their website: font-xfree86-type1: font-xfree86-type1: http://www.x.org font-xfree86-type1: font-xfree86-type1: font-xfree86-type1: PACKAGE NAME: fontcacheproto-0.1.3-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 5 K PACKAGE SIZE (uncompressed): 30 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: fontcacheproto: fontcacheproto fontcacheproto: fontcacheproto: fontcacheproto is part of X11. fontcacheproto: fontcacheproto: For more information about the X.Org Foundation (the providers of the fontcacheproto: X.Org implementation of the X Window System), see their website: fontcacheproto: fontcacheproto: http://www.x.org fontcacheproto: fontcacheproto: fontcacheproto: PACKAGE NAME: fontconfig-2.8.0-x86_64-1.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 265 K PACKAGE SIZE (uncompressed): 1090 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: fontconfig: fontconfig (Font library and tools) fontconfig: fontconfig: Fontconfig is a library and tools designed to provide system-wide fontconfig: font configuration, customization, and application access. fontconfig: fontconfig: Fontconfig is written and maintained by Keith Packard. fontconfig: fontconfig: fontconfig: fontconfig: fontconfig: PACKAGE NAME: fontsproto-2.1.1-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 44 K PACKAGE SIZE (uncompressed): 340 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: fontsproto: fontsproto fontsproto: fontsproto: fontsproto is part of X11. fontsproto: fontsproto: For more information about the X.Org Foundation (the providers of the fontsproto: X.Org implementation of the X Window System), see their website: fontsproto: fontsproto: http://www.x.org fontsproto: fontsproto: fontsproto: PACKAGE NAME: fonttosfnt-1.0.4-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 20 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: fonttosfnt: fonttosfnt fonttosfnt: fonttosfnt: fonttosfnt is part of X11. fonttosfnt: fonttosfnt: For more information about the X.Org Foundation (the providers of the fonttosfnt: X.Org implementation of the X Window System), see their website: fonttosfnt: fonttosfnt: http://www.x.org fonttosfnt: fonttosfnt: fonttosfnt: PACKAGE NAME: fslsfonts-1.0.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 16 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: fslsfonts: fslsfonts fslsfonts: fslsfonts: fslsfonts is part of X11. fslsfonts: fslsfonts: For more information about the X.Org Foundation (the providers of the fslsfonts: X.Org implementation of the X Window System), see their website: fslsfonts: fslsfonts: http://www.x.org fslsfonts: fslsfonts: fslsfonts: PACKAGE NAME: fstobdf-1.0.4-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 16 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: fstobdf: fstobdf fstobdf: fstobdf: fstobdf is part of X11. fstobdf: fstobdf: For more information about the X.Org Foundation (the providers of the fstobdf: X.Org implementation of the X Window System), see their website: fstobdf: fstobdf: http://www.x.org fstobdf: fstobdf: fstobdf: PACKAGE NAME: gccmakedep-1.0.2-noarch-2.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 3 K PACKAGE SIZE (uncompressed): 20 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gccmakedep: gccmakedep gccmakedep: gccmakedep: gccmakedep is part of X11. gccmakedep: gccmakedep: For more information about the X.Org Foundation (the providers of the gccmakedep: X.Org implementation of the X Window System), see their website: gccmakedep: gccmakedep: http://www.x.org gccmakedep: gccmakedep: gccmakedep: PACKAGE NAME: glproto-1.4.12-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 21 K PACKAGE SIZE (uncompressed): 140 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: glproto: glproto glproto: glproto: glproto is part of X11. glproto: glproto: For more information about the X.Org Foundation (the providers of the glproto: X.Org implementation of the X Window System), see their website: glproto: glproto: http://www.x.org glproto: glproto: glproto: PACKAGE NAME: iceauth-1.0.4-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 22 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: iceauth: iceauth iceauth: iceauth: iceauth is part of X11. iceauth: iceauth: For more information about the X.Org Foundation (the providers of the iceauth: X.Org implementation of the X Window System), see their website: iceauth: iceauth: http://www.x.org iceauth: iceauth: iceauth: PACKAGE NAME: ico-1.0.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 21 K PACKAGE SIZE (uncompressed): 90 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: ico: ico ico: ico: ico is part of X11. ico: ico: For more information about the X.Org Foundation (the providers of the ico: X.Org implementation of the X Window System), see their website: ico: ico: http://www.x.org ico: ico: ico: PACKAGE NAME: imake-1.0.4-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 37 K PACKAGE SIZE (uncompressed): 110 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: imake: imake imake: imake: imake is part of X11. imake: imake: For more information about the X.Org Foundation (the providers of the imake: X.Org implementation of the X Window System), see their website: imake: imake: http://www.x.org imake: imake: imake: PACKAGE NAME: inputproto-2.0.1-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 58 K PACKAGE SIZE (uncompressed): 330 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: inputproto: inputproto inputproto: inputproto: inputproto is part of X11. inputproto: inputproto: For more information about the X.Org Foundation (the providers of the inputproto: X.Org implementation of the X Window System), see their website: inputproto: inputproto: http://www.x.org inputproto: inputproto: inputproto: PACKAGE NAME: intel-gpu-tools-1.0.2-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 33 K PACKAGE SIZE (uncompressed): 160 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: intel-gpu-tools: intel-gpu-tools (Intel DRM Driver Testing Tools) intel-gpu-tools: intel-gpu-tools: This is a collection of tools for development and testing of the Intel intel-gpu-tools: DRM driver. There are many macro-level test suites including xtest, intel-gpu-tools: rendercheck, piglit, and oglconform. intel-gpu-tools: intel-gpu-tools: intel-gpu-tools: intel-gpu-tools: intel-gpu-tools: intel-gpu-tools: PACKAGE NAME: kbproto-1.0.5-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 25 K PACKAGE SIZE (uncompressed): 150 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: kbproto: kbproto kbproto: kbproto: kbproto is part of X11. kbproto: kbproto: For more information about the X.Org Foundation (the providers of the kbproto: X.Org implementation of the X Window System), see their website: kbproto: kbproto: http://www.x.org kbproto: kbproto: kbproto: PACKAGE NAME: libFS-1.0.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 34 K PACKAGE SIZE (uncompressed): 120 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libFS: libFS libFS: libFS: libFS is part of X11. libFS: libFS: For more information about the X.Org Foundation (the providers of the libFS: X.Org implementation of the X Window System), see their website: libFS: libFS: http://www.x.org libFS: libFS: libFS: PACKAGE NAME: libICE-1.0.7-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 92 K PACKAGE SIZE (uncompressed): 640 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libICE: libICE libICE: libICE: libICE is part of X11. libICE: libICE: For more information about the X.Org Foundation (the providers of the libICE: X.Org implementation of the X Window System), see their website: libICE: libICE: http://www.x.org libICE: libICE: libICE: PACKAGE NAME: libSM-1.2.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 55 K PACKAGE SIZE (uncompressed): 340 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libSM: libSM libSM: libSM: libSM is part of X11. libSM: libSM: For more information about the X.Org Foundation (the providers of the libSM: X.Org implementation of the X Window System), see their website: libSM: libSM: http://www.x.org libSM: libSM: libSM: PACKAGE NAME: libX11-1.4.3-x86_64-2.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 2252 K PACKAGE SIZE (uncompressed): 15890 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libX11: libX11 libX11: libX11: libX11 is part of X11. libX11: libX11: For more information about the X.Org Foundation (the providers of the libX11: X.Org implementation of the X Window System), see their website: libX11: libX11: http://www.x.org libX11: libX11: libX11: PACKAGE NAME: libXScrnSaver-1.2.1-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 22 K PACKAGE SIZE (uncompressed): 90 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXScrnSaver: libXScrnSaver libXScrnSaver: libXScrnSaver: libXScrnSaver is part of X11. libXScrnSaver: libXScrnSaver: For more information about the X.Org Foundation (the providers of the libXScrnSaver: X.Org implementation of the X Window System), see their website: libXScrnSaver: libXScrnSaver: http://www.x.org libXScrnSaver: libXScrnSaver: libXScrnSaver: PACKAGE NAME: libXau-1.0.6-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 22 K PACKAGE SIZE (uncompressed): 90 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXau: libXau libXau: libXau: libXau is part of X11. libXau: libXau: For more information about the X.Org Foundation (the providers of the libXau: X.Org implementation of the X Window System), see their website: libXau: libXau: http://www.x.org libXau: libXau: libXau: PACKAGE NAME: libXaw-1.0.9-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 355 K PACKAGE SIZE (uncompressed): 2370 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXaw: libXaw libXaw: libXaw: libXaw is part of X11. libXaw: libXaw: For more information about the X.Org Foundation (the providers of the libXaw: X.Org implementation of the X Window System), see their website: libXaw: libXaw: http://www.x.org libXaw: libXaw: libXaw: PACKAGE NAME: libXcomposite-0.4.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 20 K PACKAGE SIZE (uncompressed): 80 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXcomposite: libXcomposite libXcomposite: libXcomposite: libXcomposite is part of X11. libXcomposite: libXcomposite: For more information about the X.Org Foundation (the providers of the libXcomposite: X.Org implementation of the X Window System), see their website: libXcomposite: libXcomposite: http://www.x.org libXcomposite: libXcomposite: libXcomposite: PACKAGE NAME: libXcursor-1.1.11-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 36 K PACKAGE SIZE (uncompressed): 140 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXcursor: libXcursor libXcursor: libXcursor: libXcursor is part of X11. libXcursor: libXcursor: For more information about the X.Org Foundation (the providers of the libXcursor: X.Org implementation of the X Window System), see their website: libXcursor: libXcursor: http://www.x.org libXcursor: libXcursor: libXcursor: PACKAGE NAME: libXdamage-1.1.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 14 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXdamage: libXdamage libXdamage: libXdamage: libXdamage is part of X11. libXdamage: libXdamage: For more information about the X.Org Foundation (the providers of the libXdamage: X.Org implementation of the X Window System), see their website: libXdamage: libXdamage: http://www.x.org libXdamage: libXdamage: libXdamage: PACKAGE NAME: libXdmcp-1.1.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 41 K PACKAGE SIZE (uncompressed): 280 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXdmcp: libXdmcp libXdmcp: libXdmcp: libXdmcp is part of X11. libXdmcp: libXdmcp: For more information about the X.Org Foundation (the providers of the libXdmcp: X.Org implementation of the X Window System), see their website: libXdmcp: libXdmcp: http://www.x.org libXdmcp: libXdmcp: libXdmcp: PACKAGE NAME: libXevie-1.0.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 15 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXevie: libXevie libXevie: libXevie: libXevie is part of X11. libXevie: libXevie: For more information about the X.Org Foundation (the providers of the libXevie: X.Org implementation of the X Window System), see their website: libXevie: libXevie: http://www.x.org libXevie: libXevie: libXevie: PACKAGE NAME: libXext-1.2.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 114 K PACKAGE SIZE (uncompressed): 510 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXext: libXext libXext: libXext: libXext is part of X11. libXext: libXext: For more information about the X.Org Foundation (the providers of the libXext: X.Org implementation of the X Window System), see their website: libXext: libXext: http://www.x.org libXext: libXext: libXext: PACKAGE NAME: libXfixes-5.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 18 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXfixes: libXfixes libXfixes: libXfixes: libXfixes is part of X11. libXfixes: libXfixes: For more information about the X.Org Foundation (the providers of the libXfixes: X.Org implementation of the X Window System), see their website: libXfixes: libXfixes: http://www.x.org libXfixes: libXfixes: libXfixes: PACKAGE NAME: libXfont-1.4.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 133 K PACKAGE SIZE (uncompressed): 380 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXfont: libXfont libXfont: libXfont: libXfont is part of X11. libXfont: libXfont: For more information about the X.Org Foundation (the providers of the libXfont: X.Org implementation of the X Window System), see their website: libXfont: libXfont: http://www.x.org libXfont: libXfont: libXfont: PACKAGE NAME: libXfontcache-1.0.5-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 14 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXfontcache: libXfontcache libXfontcache: libXfontcache: libXfontcache is part of X11. libXfontcache: libXfontcache: For more information about the X.Org Foundation (the providers of the libXfontcache: X.Org implementation of the X Window System), see their website: libXfontcache: libXfontcache: http://www.x.org libXfontcache: libXfontcache: libXfontcache: PACKAGE NAME: libXft-2.2.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 55 K PACKAGE SIZE (uncompressed): 170 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXft: libXft libXft: libXft: libXft is part of X11. libXft: libXft: For more information about the X.Org Foundation (the providers of the libXft: X.Org implementation of the X Window System), see their website: libXft: libXft: http://www.x.org libXft: libXft: libXft: PACKAGE NAME: libXi-1.4.2-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 165 K PACKAGE SIZE (uncompressed): 950 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXi: libXi libXi: libXi: libXi is part of X11. libXi: libXi: For more information about the X.Org Foundation (the providers of the libXi: X.Org implementation of the X Window System), see their website: libXi: libXi: http://www.x.org libXi: libXi: libXi: PACKAGE NAME: libXinerama-1.1.1-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 18 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXinerama: libXinerama libXinerama: libXinerama: libXinerama is part of X11. libXinerama: libXinerama: For more information about the X.Org Foundation (the providers of the libXinerama: X.Org implementation of the X Window System), see their website: libXinerama: libXinerama: http://www.x.org libXinerama: libXinerama: libXinerama: PACKAGE NAME: libXmu-1.1.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 88 K PACKAGE SIZE (uncompressed): 570 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXmu: libXmu libXmu: libXmu: libXmu is part of X11. libXmu: libXmu: For more information about the X.Org Foundation (the providers of the libXmu: X.Org implementation of the X Window System), see their website: libXmu: libXmu: http://www.x.org libXmu: libXmu: libXmu: PACKAGE NAME: libXp-1.0.1-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 81 K PACKAGE SIZE (uncompressed): 160 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXp: libXp libXp: libXp: libXp is part of X11. libXp: libXp: For more information about the X.Org Foundation (the providers of the libXp: X.Org implementation of the X Window System), see their website: libXp: libXp: http://www.x.org libXp: libXp: libXp: PACKAGE NAME: libXpm-3.5.9-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 71 K PACKAGE SIZE (uncompressed): 230 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXpm: libXpm libXpm: libXpm: libXpm is part of X11. libXpm: libXpm: For more information about the X.Org Foundation (the providers of the libXpm: X.Org implementation of the X Window System), see their website: libXpm: libXpm: http://www.x.org libXpm: libXpm: libXpm: PACKAGE NAME: libXrandr-1.3.1-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 35 K PACKAGE SIZE (uncompressed): 130 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXrandr: libXrandr libXrandr: libXrandr: libXrandr is part of X11. libXrandr: libXrandr: For more information about the X.Org Foundation (the providers of the libXrandr: X.Org implementation of the X Window System), see their website: libXrandr: libXrandr: http://www.x.org libXrandr: libXrandr: libXrandr: PACKAGE NAME: libXrender-0.9.6-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 31 K PACKAGE SIZE (uncompressed): 120 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXrender: libXrender libXrender: libXrender: libXrender is part of X11. libXrender: libXrender: For more information about the X.Org Foundation (the providers of the libXrender: X.Org implementation of the X Window System), see their website: libXrender: libXrender: http://www.x.org libXrender: libXrender: libXrender: PACKAGE NAME: libXres-1.0.5-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 16 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXres: libXres libXres: libXres: libXres is part of X11. libXres: libXres: For more information about the X.Org Foundation (the providers of the libXres: X.Org implementation of the X Window System), see their website: libXres: libXres: http://www.x.org libXres: libXres: libXres: PACKAGE NAME: libXt-1.1.1-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 408 K PACKAGE SIZE (uncompressed): 1220 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXt: libXt libXt: libXt: libXt is part of X11. libXt: libXt: For more information about the X.Org Foundation (the providers of the libXt: X.Org implementation of the X Window System), see their website: libXt: libXt: http://www.x.org libXt: libXt: libXt: PACKAGE NAME: libXtst-1.2.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 42 K PACKAGE SIZE (uncompressed): 250 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXtst: libXtst libXtst: libXtst: libXtst is part of X11. libXtst: libXtst: For more information about the X.Org Foundation (the providers of the libXtst: X.Org implementation of the X Window System), see their website: libXtst: libXtst: http://www.x.org libXtst: libXtst: libXtst: PACKAGE NAME: libXv-1.0.6-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 42 K PACKAGE SIZE (uncompressed): 130 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXv: libXv libXv: libXv: libXv is part of X11. libXv: libXv: For more information about the X.Org Foundation (the providers of the libXv: X.Org implementation of the X Window System), see their website: libXv: libXv: http://www.x.org libXv: libXv: libXv: PACKAGE NAME: libXvMC-1.0.6-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 29 K PACKAGE SIZE (uncompressed): 130 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXvMC: libXvMC libXvMC: libXvMC: libXvMC is part of X11. libXvMC: libXvMC: For more information about the X.Org Foundation (the providers of the libXvMC: X.Org implementation of the X Window System), see their website: libXvMC: libXvMC: http://www.x.org libXvMC: libXvMC: libXvMC: PACKAGE NAME: libXxf86dga-1.1.2-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 26 K PACKAGE SIZE (uncompressed): 110 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXxf86dga: libXxf86dga libXxf86dga: libXxf86dga: libXxf86dga is part of X11. libXxf86dga: libXxf86dga: For more information about the X.Org Foundation (the providers of the libXxf86dga: X.Org implementation of the X Window System), see their website: libXxf86dga: libXxf86dga: http://www.x.org libXxf86dga: libXxf86dga: libXxf86dga: PACKAGE NAME: libXxf86misc-1.0.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 16 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXxf86misc: libXxf86misc libXxf86misc: libXxf86misc: libXxf86misc is part of X11. libXxf86misc: libXxf86misc: For more information about the X.Org Foundation (the providers of the libXxf86misc: X.Org implementation of the X Window System), see their website: libXxf86misc: libXxf86misc: http://www.x.org libXxf86misc: libXxf86misc: libXxf86misc: PACKAGE NAME: libXxf86vm-1.1.1-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 22 K PACKAGE SIZE (uncompressed): 100 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libXxf86vm: libXxf86vm libXxf86vm: libXxf86vm: libXxf86vm is part of X11. libXxf86vm: libXxf86vm: For more information about the X.Org Foundation (the providers of the libXxf86vm: X.Org implementation of the X Window System), see their website: libXxf86vm: libXxf86vm: http://www.x.org libXxf86vm: libXxf86vm: libXxf86vm: PACKAGE NAME: libdmx-1.1.1-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 41 K PACKAGE SIZE (uncompressed): 110 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libdmx: libdmx libdmx: libdmx: libdmx is part of X11. libdmx: libdmx: For more information about the X.Org Foundation (the providers of the libdmx: X.Org implementation of the X Window System), see their website: libdmx: libdmx: http://www.x.org libdmx: libdmx: libdmx: PACKAGE NAME: libdrm-2.4.23-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 95 K PACKAGE SIZE (uncompressed): 440 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libdrm: libdrm (A library to support Direct Rendering) libdrm: libdrm: This library implements an interface to the kernel's DRM services. libdrm: It is used to support hardware accelerated 3-D rendering. libdrm: libdrm: libdrm: libdrm: libdrm: libdrm: libdrm: PACKAGE NAME: liberation-fonts-ttf-1.06.0.20100721-noarch-2.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 810 K PACKAGE SIZE (uncompressed): 2110 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: liberation-fonts-ttf: liberation-fonts-ttf (Liberation TTF Fonts) liberation-fonts-ttf: liberation-fonts-ttf: Liberation is the collective name of three TrueType font liberation-fonts-ttf: families: Liberation Sans, Liberation Serif and Liberation liberation-fonts-ttf: Mono. These fonts are metric-compatible with Arial, Times liberation-fonts-ttf: New Roman, and Courier New respectively. liberation-fonts-ttf: liberation-fonts-ttf: The fonts were developed by Steve Matteson of Ascender Corp. liberation-fonts-ttf: for Red Hat, Inc. liberation-fonts-ttf: liberation-fonts-ttf: PACKAGE NAME: libfontenc-1.1.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 22 K PACKAGE SIZE (uncompressed): 80 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libfontenc: libfontenc libfontenc: libfontenc: libfontenc is part of X11. libfontenc: libfontenc: For more information about the X.Org Foundation (the providers of the libfontenc: X.Org implementation of the X Window System), see their website: libfontenc: libfontenc: http://www.x.org libfontenc: libfontenc: libfontenc: PACKAGE NAME: libpciaccess-0.12.1-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 31 K PACKAGE SIZE (uncompressed): 110 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libpciaccess: libpciaccess libpciaccess: libpciaccess: libpciaccess is part of X11. libpciaccess: libpciaccess: For more information about the X.Org Foundation (the providers of the libpciaccess: X.Org implementation of the X Window System), see their website: libpciaccess: libpciaccess: http://www.x.org libpciaccess: libpciaccess: libpciaccess: PACKAGE NAME: libpthread-stubs-0.3-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 1 K PACKAGE SIZE (uncompressed): 20 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libpthread-stubs: libpthread-stubs libpthread-stubs: libpthread-stubs: libpthread-stubs is part of X11. libpthread-stubs: libpthread-stubs: For more information about the X.Org Foundation (the providers of the libpthread-stubs: X.Org implementation of the X Window System), see their website: libpthread-stubs: libpthread-stubs: http://www.x.org libpthread-stubs: libpthread-stubs: libpthread-stubs: PACKAGE NAME: libxcb-1.7-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 218 K PACKAGE SIZE (uncompressed): 3040 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libxcb: libxcb (X protocol C-language Binding) libxcb: libxcb: The XCB library provides an interface to the X Window System protocol libxcb: which is fully capable of replacing Xlib. In fact, libX11 makes use libxcb: of libxcb as much as possible. :-) Porting to XCB has several libxcb: advantages such as a smaller memory footprint, latency hiding, direct libxcb: protocol access, and improved thread support. libxcb: libxcb: libxcb: libxcb: PACKAGE NAME: libxkbfile-1.0.7-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 74 K PACKAGE SIZE (uncompressed): 230 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libxkbfile: libxkbfile libxkbfile: libxkbfile: libxkbfile is part of X11. libxkbfile: libxkbfile: For more information about the X.Org Foundation (the providers of the libxkbfile: X.Org implementation of the X Window System), see their website: libxkbfile: libxkbfile: http://www.x.org libxkbfile: libxkbfile: libxkbfile: PACKAGE NAME: listres-1.0.2-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 14 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: listres: listres listres: listres: listres is part of X11. listres: listres: For more information about the X.Org Foundation (the providers of the listres: X.Org implementation of the X Window System), see their website: listres: listres: http://www.x.org listres: listres: listres: PACKAGE NAME: lndir-1.0.2-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 14 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: lndir: lndir lndir: lndir: lndir is part of X11. lndir: lndir: For more information about the X.Org Foundation (the providers of the lndir: X.Org implementation of the X Window System), see their website: lndir: lndir: http://www.x.org lndir: lndir: lndir: PACKAGE NAME: luit-1.1.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 30 K PACKAGE SIZE (uncompressed): 100 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: luit: luit luit: luit: luit is part of X11. luit: luit: For more information about the X.Org Foundation (the providers of the luit: X.Org implementation of the X Window System), see their website: luit: luit: http://www.x.org luit: luit: luit: PACKAGE NAME: makedepend-1.0.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 23 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: makedepend: makedepend makedepend: makedepend: makedepend is part of X11. makedepend: makedepend: For more information about the X.Org Foundation (the providers of the makedepend: X.Org implementation of the X Window System), see their website: makedepend: makedepend: http://www.x.org makedepend: makedepend: makedepend: PACKAGE NAME: mesa-7.9.2-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 5257 K PACKAGE SIZE (uncompressed): 71160 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: mesa: mesa (a 3-D graphics library) mesa: mesa: Mesa is a 3-D graphics library with an API very similar to that of mesa: another well-known 3-D graphics library. :-) The Mesa libraries are mesa: used by X to provide both software and hardware accelerated graphics. mesa: mesa: Mesa was written by Brian Paul. mesa: mesa: mesa: mesa: PACKAGE NAME: mkcomposecache-1.2.1-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 9 K PACKAGE SIZE (uncompressed): 40 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: mkcomposecache: mkcomposecache mkcomposecache: mkcomposecache: mkcomposecache is part of X11. mkcomposecache: mkcomposecache: For more information about the X.Org Foundation (the providers of the mkcomposecache: X.Org implementation of the X Window System), see their website: mkcomposecache: mkcomposecache: http://www.x.org mkcomposecache: mkcomposecache: mkcomposecache: PACKAGE NAME: mkfontdir-1.0.6-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 13 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: mkfontdir: mkfontdir mkfontdir: mkfontdir: mkfontdir is part of X11. mkfontdir: mkfontdir: For more information about the X.Org Foundation (the providers of the mkfontdir: X.Org implementation of the X Window System), see their website: mkfontdir: mkfontdir: http://www.x.org mkfontdir: mkfontdir: mkfontdir: PACKAGE NAME: mkfontscale-1.0.8-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 25 K PACKAGE SIZE (uncompressed): 80 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: mkfontscale: mkfontscale mkfontscale: mkfontscale: mkfontscale is part of X11. mkfontscale: mkfontscale: For more information about the X.Org Foundation (the providers of the mkfontscale: X.Org implementation of the X Window System), see their website: mkfontscale: mkfontscale: http://www.x.org mkfontscale: mkfontscale: mkfontscale: PACKAGE NAME: oclock-1.0.2-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 18 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: oclock: oclock oclock: oclock: oclock is part of X11. oclock: oclock: For more information about the X.Org Foundation (the providers of the oclock: X.Org implementation of the X Window System), see their website: oclock: oclock: http://www.x.org oclock: oclock: oclock: PACKAGE NAME: pixman-0.20.2-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 160 K PACKAGE SIZE (uncompressed): 520 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pixman: pixman pixman: pixman: pixman contains low-level pixel manipulation routines and is used by pixman: both xorg and cairo. pixman: pixman: For more information about the X.Org Foundation (the providers of the pixman: X.Org implementation of the X Window System), see their website: pixman: pixman: http://www.x.org pixman: pixman: PACKAGE NAME: printproto-1.0.5-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 17 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: printproto: printproto printproto: printproto: printproto is part of X11. printproto: printproto: For more information about the X.Org Foundation (the providers of the printproto: X.Org implementation of the X Window System), see their website: printproto: printproto: http://www.x.org printproto: printproto: printproto: PACKAGE NAME: randrproto-1.3.2-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 35 K PACKAGE SIZE (uncompressed): 160 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: randrproto: randrproto randrproto: randrproto: randrproto is part of X11. randrproto: randrproto: For more information about the X.Org Foundation (the providers of the randrproto: X.Org implementation of the X Window System), see their website: randrproto: randrproto: http://www.x.org randrproto: randrproto: randrproto: PACKAGE NAME: recordproto-1.14.1-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 25 K PACKAGE SIZE (uncompressed): 180 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: recordproto: recordproto recordproto: recordproto: recordproto is part of X11. recordproto: recordproto: For more information about the X.Org Foundation (the providers of the recordproto: X.Org implementation of the X Window System), see their website: recordproto: recordproto: http://www.x.org recordproto: recordproto: recordproto: PACKAGE NAME: rendercheck-1.4-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 32 K PACKAGE SIZE (uncompressed): 110 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: rendercheck: rendercheck rendercheck: rendercheck: rendercheck is part of X11. rendercheck: rendercheck: For more information about the X.Org Foundation (the providers of the rendercheck: X.Org implementation of the X Window System), see their website: rendercheck: rendercheck: http://www.x.org rendercheck: rendercheck: rendercheck: PACKAGE NAME: renderproto-0.11.1-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 20 K PACKAGE SIZE (uncompressed): 90 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: renderproto: renderproto renderproto: renderproto: renderproto is part of X11. renderproto: renderproto: For more information about the X.Org Foundation (the providers of the renderproto: X.Org implementation of the X Window System), see their website: renderproto: renderproto: http://www.x.org renderproto: renderproto: renderproto: PACKAGE NAME: resourceproto-1.1.1-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 9 K PACKAGE SIZE (uncompressed): 40 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: resourceproto: resourceproto resourceproto: resourceproto: resourceproto is part of X11. resourceproto: resourceproto: For more information about the X.Org Foundation (the providers of the resourceproto: X.Org implementation of the X Window System), see their website: resourceproto: resourceproto: http://www.x.org resourceproto: resourceproto: resourceproto: PACKAGE NAME: rgb-1.0.4-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 17 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: rgb: rgb rgb: rgb: rgb is part of X11. rgb: rgb: For more information about the X.Org Foundation (the providers of the rgb: X.Org implementation of the X Window System), see their website: rgb: rgb: http://www.x.org rgb: rgb: rgb: PACKAGE NAME: scripts-1.0.1-noarch-2.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 6 K PACKAGE SIZE (uncompressed): 30 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: scripts: scripts scripts: scripts: scripts is part of X11. scripts: scripts: For more information about the X.Org Foundation (the providers of the scripts: X.Org implementation of the X Window System), see their website: scripts: scripts: http://www.x.org scripts: scripts: scripts: PACKAGE NAME: scrnsaverproto-1.2.1-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 20 K PACKAGE SIZE (uncompressed): 120 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: scrnsaverproto: scrnsaverproto scrnsaverproto: scrnsaverproto: scrnsaverproto is part of X11. scrnsaverproto: scrnsaverproto: For more information about the X.Org Foundation (the providers of the scrnsaverproto: X.Org implementation of the X Window System), see their website: scrnsaverproto: scrnsaverproto: http://www.x.org scrnsaverproto: scrnsaverproto: scrnsaverproto: PACKAGE NAME: sessreg-1.0.6-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 17 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: sessreg: sessreg sessreg: sessreg: sessreg is part of X11. sessreg: sessreg: For more information about the X.Org Foundation (the providers of the sessreg: X.Org implementation of the X Window System), see their website: sessreg: sessreg: http://www.x.org sessreg: sessreg: sessreg: PACKAGE NAME: setxkbmap-1.2.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 20 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: setxkbmap: setxkbmap setxkbmap: setxkbmap: setxkbmap is part of X11. setxkbmap: setxkbmap: For more information about the X.Org Foundation (the providers of the setxkbmap: X.Org implementation of the X Window System), see their website: setxkbmap: setxkbmap: http://www.x.org setxkbmap: setxkbmap: setxkbmap: PACKAGE NAME: showfont-1.0.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 15 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: showfont: showfont showfont: showfont: showfont is part of X11. showfont: showfont: For more information about the X.Org Foundation (the providers of the showfont: X.Org implementation of the X Window System), see their website: showfont: showfont: http://www.x.org showfont: showfont: showfont: PACKAGE NAME: smproxy-1.0.4-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 19 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: smproxy: smproxy smproxy: smproxy: smproxy is part of X11. smproxy: smproxy: For more information about the X.Org Foundation (the providers of the smproxy: X.Org implementation of the X Window System), see their website: smproxy: smproxy: http://www.x.org smproxy: smproxy: smproxy: PACKAGE NAME: twm-1.0.6-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 104 K PACKAGE SIZE (uncompressed): 260 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: twm: twm twm: twm: twm is part of X11. twm: twm: For more information about the X.Org Foundation (the providers of the twm: X.Org implementation of the X Window System), see their website: twm: twm: http://www.x.org twm: twm: twm: PACKAGE NAME: util-macros-1.13.0-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 25 K PACKAGE SIZE (uncompressed): 130 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: util-macros: util-macros util-macros: util-macros: util-macros is part of X11. util-macros: util-macros: For more information about the X.Org Foundation (the providers of the util-macros: X.Org implementation of the X Window System), see their website: util-macros: util-macros: http://www.x.org util-macros: util-macros: util-macros: PACKAGE NAME: videoproto-2.3.1-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 15 K PACKAGE SIZE (uncompressed): 80 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: videoproto: videoproto videoproto: videoproto: videoproto is part of X11. videoproto: videoproto: For more information about the X.Org Foundation (the providers of the videoproto: X.Org implementation of the X Window System), see their website: videoproto: videoproto: http://www.x.org videoproto: videoproto: videoproto: PACKAGE NAME: viewres-1.0.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 22 K PACKAGE SIZE (uncompressed): 80 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: viewres: viewres viewres: viewres: viewres is part of X11. viewres: viewres: For more information about the X.Org Foundation (the providers of the viewres: X.Org implementation of the X Window System), see their website: viewres: viewres: http://www.x.org viewres: viewres: viewres: PACKAGE NAME: x11-driver-7.5-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 197 K PACKAGE SIZE (uncompressed): 590 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: x11-driver: x11-driver (input and output drivers for X) x11-driver: x11-driver: x11-driver: x11-driver: x11-driver: x11-driver: x11-driver: x11-driver: x11-driver: x11-driver: PACKAGE NAME: x11perf-1.5.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 65 K PACKAGE SIZE (uncompressed): 230 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: x11perf: x11perf x11perf: x11perf: x11perf is part of X11. x11perf: x11perf: For more information about the X.Org Foundation (the providers of the x11perf: X.Org implementation of the X Window System), see their website: x11perf: x11perf: http://www.x.org x11perf: x11perf: x11perf: PACKAGE NAME: xauth-1.0.5-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 30 K PACKAGE SIZE (uncompressed): 90 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xauth: xauth xauth: xauth: xauth is part of X11. xauth: xauth: For more information about the X.Org Foundation (the providers of the xauth: X.Org implementation of the X Window System), see their website: xauth: xauth: http://www.x.org xauth: xauth: xauth: PACKAGE NAME: xaw3d-1.5E-x86_64-1.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 162 K PACKAGE SIZE (uncompressed): 790 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xaw3d: xaw3d (3D version of libXaw) xaw3d: xaw3d: Xaw3d is a set of 3D widgets by Kaleb S. Keithley based on the Athena xaw3d: Widget set. The Three-D Athena may be used as a replacement for the xaw3d: Athena (Xaw) Widget set -- you may relink almost any Athena Widget xaw3d: based application and obtain a three dimensional appearance on some of xaw3d: the widgets. You can also replace your shared libXaw with libXaw3d xaw3d: and obtain the three dimensional appearance without even relinking. xaw3d: xaw3d: xaw3d: PACKAGE NAME: xbacklight-1.1.2-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 12 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xbacklight: xbacklight xbacklight: xbacklight: xbacklight is part of X11. xbacklight: xbacklight: For more information about the X.Org Foundation (the providers of the xbacklight: X.Org implementation of the X Window System), see their website: xbacklight: xbacklight: http://www.x.org xbacklight: xbacklight: xbacklight: PACKAGE NAME: xbiff-1.0.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 18 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xbiff: xbiff xbiff: xbiff: xbiff is part of X11. xbiff: xbiff: For more information about the X.Org Foundation (the providers of the xbiff: X.Org implementation of the X Window System), see their website: xbiff: xbiff: http://www.x.org xbiff: xbiff: xbiff: PACKAGE NAME: xbitmaps-1.1.1-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 25 K PACKAGE SIZE (uncompressed): 270 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xbitmaps: xbitmaps xbitmaps: xbitmaps: xbitmaps is part of X11. xbitmaps: xbitmaps: For more information about the X.Org Foundation (the providers of the xbitmaps: X.Org implementation of the X Window System), see their website: xbitmaps: xbitmaps: http://www.x.org xbitmaps: xbitmaps: xbitmaps: PACKAGE NAME: xcalc-1.0.4.1-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 30 K PACKAGE SIZE (uncompressed): 110 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xcalc: xcalc xcalc: xcalc: xcalc is part of X11. xcalc: xcalc: For more information about the X.Org Foundation (the providers of the xcalc: X.Org implementation of the X Window System), see their website: xcalc: xcalc: http://www.x.org xcalc: xcalc: xcalc: PACKAGE NAME: xcb-proto-1.6-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 50 K PACKAGE SIZE (uncompressed): 470 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xcb-proto: xcb-proto xcb-proto: xcb-proto: xcb-proto is part of X11. xcb-proto: xcb-proto: For more information about the X.Org Foundation (the providers of the xcb-proto: X.Org implementation of the X Window System), see their website: xcb-proto: xcb-proto: http://www.x.org xcb-proto: xcb-proto: xcb-proto: PACKAGE NAME: xcb-util-0.3.6-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 44 K PACKAGE SIZE (uncompressed): 260 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xcb-util: xcb-util xcb-util: xcb-util: xcb-util is part of X11. xcb-util: xcb-util: For more information about the X.Org Foundation (the providers of the xcb-util: X.Org implementation of the X Window System), see their website: xcb-util: xcb-util: http://www.x.org xcb-util: xcb-util: xcb-util: PACKAGE NAME: xclipboard-1.1.1-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 24 K PACKAGE SIZE (uncompressed): 80 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xclipboard: xclipboard xclipboard: xclipboard: xclipboard is part of X11. xclipboard: xclipboard: For more information about the X.Org Foundation (the providers of the xclipboard: X.Org implementation of the X Window System), see their website: xclipboard: xclipboard: http://www.x.org xclipboard: xclipboard: xclipboard: PACKAGE NAME: xclock-1.0.5-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 32 K PACKAGE SIZE (uncompressed): 100 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xclock: xclock xclock: xclock: xclock is part of X11. xclock: xclock: For more information about the X.Org Foundation (the providers of the xclock: X.Org implementation of the X Window System), see their website: xclock: xclock: http://www.x.org xclock: xclock: xclock: PACKAGE NAME: xcmiscproto-1.2.1-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 13 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xcmiscproto: xcmiscproto xcmiscproto: xcmiscproto: xcmiscproto is part of X11. xcmiscproto: xcmiscproto: For more information about the X.Org Foundation (the providers of the xcmiscproto: X.Org implementation of the X Window System), see their website: xcmiscproto: xcmiscproto: http://www.x.org xcmiscproto: xcmiscproto: xcmiscproto: PACKAGE NAME: xcmsdb-1.0.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 22 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xcmsdb: xcmsdb xcmsdb: xcmsdb: xcmsdb is part of X11. xcmsdb: xcmsdb: For more information about the X.Org Foundation (the providers of the xcmsdb: X.Org implementation of the X Window System), see their website: xcmsdb: xcmsdb: http://www.x.org xcmsdb: xcmsdb: xcmsdb: PACKAGE NAME: xcompmgr-1.1.5-x86_64-2.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 21 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xcompmgr: xcompmgr xcompmgr: xcompmgr: xcompmgr is part of X11. xcompmgr: xcompmgr: For more information about the X.Org Foundation (the providers of the xcompmgr: X.Org implementation of the X Window System), see their website: xcompmgr: xcompmgr: http://www.x.org xcompmgr: xcompmgr: xcompmgr: PACKAGE NAME: xconsole-1.0.4-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 19 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xconsole: xconsole xconsole: xconsole: xconsole is part of X11. xconsole: xconsole: For more information about the X.Org Foundation (the providers of the xconsole: X.Org implementation of the X Window System), see their website: xconsole: xconsole: http://www.x.org xconsole: xconsole: xconsole: PACKAGE NAME: xcursor-themes-1.0.3-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 312 K PACKAGE SIZE (uncompressed): 3700 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xcursor-themes: xcursor-themes xcursor-themes: xcursor-themes: xcursor-themes is part of X11. xcursor-themes: xcursor-themes: For more information about the X.Org Foundation (the providers of the xcursor-themes: X.Org implementation of the X Window System), see their website: xcursor-themes: xcursor-themes: http://www.x.org xcursor-themes: xcursor-themes: xcursor-themes: PACKAGE NAME: xcursorgen-1.0.4-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 15 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xcursorgen: xcursorgen xcursorgen: xcursorgen: xcursorgen is part of X11. xcursorgen: xcursorgen: For more information about the X.Org Foundation (the providers of the xcursorgen: X.Org implementation of the X Window System), see their website: xcursorgen: xcursorgen: http://www.x.org xcursorgen: xcursorgen: xcursorgen: PACKAGE NAME: xdbedizzy-1.1.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 17 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xdbedizzy: xdbedizzy xdbedizzy: xdbedizzy: xdbedizzy is part of X11. xdbedizzy: xdbedizzy: For more information about the X.Org Foundation (the providers of the xdbedizzy: X.Org implementation of the X Window System), see their website: xdbedizzy: xdbedizzy: http://www.x.org xdbedizzy: xdbedizzy: xdbedizzy: PACKAGE NAME: xdg-utils-1.1.0_rc1-noarch-1.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 52 K PACKAGE SIZE (uncompressed): 260 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xdg-utils: xdg-utils (command line tools that assist applications) xdg-utils: xdg-utils: Xdg-utils is a set of command line tools that assist applications xdg-utils: with a variety of desktop integration tasks. About half of the xdg-utils: tools focus on tasks commonly required during the installation of xdg-utils: a desktop application and the other half focuses on integration xdg-utils: with the desktop environment while the application is running. xdg-utils: xdg-utils: Homepage: http://portland.freedesktop.org/wiki/ xdg-utils: xdg-utils: PACKAGE NAME: xditview-1.0.2-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 30 K PACKAGE SIZE (uncompressed): 140 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xditview: xditview xditview: xditview: xditview is part of X11. xditview: xditview: For more information about the X.Org Foundation (the providers of the xditview: X.Org implementation of the X Window System), see their website: xditview: xditview: http://www.x.org xditview: xditview: xditview: PACKAGE NAME: xdm-1.1.10-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 115 K PACKAGE SIZE (uncompressed): 390 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xdm: xdm xdm: xdm: xdm is part of X11. xdm: xdm: For more information about the X.Org Foundation (the providers of the xdm: X.Org implementation of the X Window System), see their website: xdm: xdm: http://www.x.org xdm: xdm: xdm: PACKAGE NAME: xdpyinfo-1.2.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 27 K PACKAGE SIZE (uncompressed): 90 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xdpyinfo: xdpyinfo xdpyinfo: xdpyinfo: xdpyinfo is part of X11. xdpyinfo: xdpyinfo: For more information about the X.Org Foundation (the providers of the xdpyinfo: X.Org implementation of the X Window System), see their website: xdpyinfo: xdpyinfo: http://www.x.org xdpyinfo: xdpyinfo: xdpyinfo: PACKAGE NAME: xdriinfo-1.0.4-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 12 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xdriinfo: xdriinfo xdriinfo: xdriinfo: xdriinfo is part of X11. xdriinfo: xdriinfo: For more information about the X.Org Foundation (the providers of the xdriinfo: X.Org implementation of the X Window System), see their website: xdriinfo: xdriinfo: http://www.x.org xdriinfo: xdriinfo: xdriinfo: PACKAGE NAME: xedit-1.2.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 306 K PACKAGE SIZE (uncompressed): 990 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xedit: xedit xedit: xedit: xedit is part of X11. xedit: xedit: For more information about the X.Org Foundation (the providers of the xedit: X.Org implementation of the X Window System), see their website: xedit: xedit: http://www.x.org xedit: xedit: xedit: PACKAGE NAME: xev-1.1.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 19 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xev: xev xev: xev: xev is part of X11. xev: xev: For more information about the X.Org Foundation (the providers of the xev: X.Org implementation of the X Window System), see their website: xev: xev: http://www.x.org xev: xev: xev: PACKAGE NAME: xextproto-7.2.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 137 K PACKAGE SIZE (uncompressed): 1280 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xextproto: xextproto xextproto: xextproto: xextproto is part of X11. xextproto: xextproto: For more information about the X.Org Foundation (the providers of the xextproto: X.Org implementation of the X Window System), see their website: xextproto: xextproto: http://www.x.org xextproto: xextproto: xextproto: PACKAGE NAME: xeyes-1.1.1-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 18 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xeyes: xeyes xeyes: xeyes: xeyes is part of X11. xeyes: xeyes: For more information about the X.Org Foundation (the providers of the xeyes: X.Org implementation of the X Window System), see their website: xeyes: xeyes: http://www.x.org xeyes: xeyes: xeyes: PACKAGE NAME: xf86-input-acecad-1.4.0-x86_64-2.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 17 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-input-acecad: xf86-input-acecad xf86-input-acecad: xf86-input-acecad: xf86-input-acecad is part of X11. xf86-input-acecad: xf86-input-acecad: For more information about the X.Org Foundation (the providers of the xf86-input-acecad: X.Org implementation of the X Window System), see their website: xf86-input-acecad: xf86-input-acecad: http://www.x.org xf86-input-acecad: xf86-input-acecad: xf86-input-acecad: PACKAGE NAME: xf86-input-aiptek-1.3.1-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 22 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-input-aiptek: xf86-input-aiptek xf86-input-aiptek: xf86-input-aiptek: xf86-input-aiptek is part of X11. xf86-input-aiptek: xf86-input-aiptek: For more information about the X.Org Foundation (the providers of the xf86-input-aiptek: X.Org implementation of the X Window System), see their website: xf86-input-aiptek: xf86-input-aiptek: http://www.x.org xf86-input-aiptek: xf86-input-aiptek: xf86-input-aiptek: PACKAGE NAME: xf86-input-evdev-2.6.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 35 K PACKAGE SIZE (uncompressed): 120 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-input-evdev: xf86-input-evdev xf86-input-evdev: xf86-input-evdev: xf86-input-evdev is part of X11. xf86-input-evdev: xf86-input-evdev: For more information about the X.Org Foundation (the providers of the xf86-input-evdev: X.Org implementation of the X Window System), see their website: xf86-input-evdev: xf86-input-evdev: http://www.x.org xf86-input-evdev: xf86-input-evdev: xf86-input-evdev: PACKAGE NAME: xf86-input-joystick-1.5.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 32 K PACKAGE SIZE (uncompressed): 100 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-input-joystick: xf86-input-joystick xf86-input-joystick: xf86-input-joystick: xf86-input-joystick is part of X11. xf86-input-joystick: xf86-input-joystick: For more information about the X.Org Foundation (the providers of the xf86-input-joystick: X.Org implementation of the X Window System), see their website: xf86-input-joystick: xf86-input-joystick: http://www.x.org xf86-input-joystick: xf86-input-joystick: xf86-input-joystick: PACKAGE NAME: xf86-input-keyboard-1.6.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 24 K PACKAGE SIZE (uncompressed): 100 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-input-keyboard: xf86-input-keyboard xf86-input-keyboard: xf86-input-keyboard: xf86-input-keyboard is part of X11. xf86-input-keyboard: xf86-input-keyboard: For more information about the X.Org Foundation (the providers of the xf86-input-keyboard: X.Org implementation of the X Window System), see their website: xf86-input-keyboard: xf86-input-keyboard: http://www.x.org xf86-input-keyboard: xf86-input-keyboard: xf86-input-keyboard: PACKAGE NAME: xf86-input-mouse-1.7.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 45 K PACKAGE SIZE (uncompressed): 170 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-input-mouse: xf86-input-mouse xf86-input-mouse: xf86-input-mouse: xf86-input-mouse is part of X11. xf86-input-mouse: xf86-input-mouse: For more information about the X.Org Foundation (the providers of the xf86-input-mouse: X.Org implementation of the X Window System), see their website: xf86-input-mouse: xf86-input-mouse: http://www.x.org xf86-input-mouse: xf86-input-mouse: xf86-input-mouse: PACKAGE NAME: xf86-input-penmount-1.4.1-x86_64-2.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 12 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-input-penmount: xf86-input-penmount xf86-input-penmount: xf86-input-penmount: xf86-input-penmount is part of X11. xf86-input-penmount: xf86-input-penmount: For more information about the X.Org Foundation (the providers of the xf86-input-penmount: X.Org implementation of the X Window System), see their website: xf86-input-penmount: xf86-input-penmount: http://www.x.org xf86-input-penmount: xf86-input-penmount: xf86-input-penmount: PACKAGE NAME: xf86-input-synaptics-1.4.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 61 K PACKAGE SIZE (uncompressed): 190 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-input-synaptics: xf86-input-synaptics xf86-input-synaptics: xf86-input-synaptics: xf86-input-synaptics is part of X11. xf86-input-synaptics: xf86-input-synaptics: For more information about the X.Org Foundation (the providers of the xf86-input-synaptics: X.Org implementation of the X Window System), see their website: xf86-input-synaptics: xf86-input-synaptics: http://www.x.org xf86-input-synaptics: xf86-input-synaptics: xf86-input-synaptics: PACKAGE NAME: xf86-input-vmmouse-12.7.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 24 K PACKAGE SIZE (uncompressed): 100 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-input-vmmouse: xf86-input-vmmouse xf86-input-vmmouse: xf86-input-vmmouse: xf86-input-vmmouse is part of X11. xf86-input-vmmouse: xf86-input-vmmouse: For more information about the X.Org Foundation (the providers of the xf86-input-vmmouse: X.Org implementation of the X Window System), see their website: xf86-input-vmmouse: xf86-input-vmmouse: http://www.x.org xf86-input-vmmouse: xf86-input-vmmouse: xf86-input-vmmouse: PACKAGE NAME: xf86-input-void-1.3.1-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 15 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-input-void: xf86-input-void xf86-input-void: xf86-input-void: xf86-input-void is part of X11. xf86-input-void: xf86-input-void: For more information about the X.Org Foundation (the providers of the xf86-input-void: X.Org implementation of the X Window System), see their website: xf86-input-void: xf86-input-void: http://www.x.org xf86-input-void: xf86-input-void: xf86-input-void: PACKAGE NAME: xf86-input-wacom-0.10.11-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 79 K PACKAGE SIZE (uncompressed): 260 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-input-wacom: xf86-input-wacom xf86-input-wacom: xf86-input-wacom: xf86-input-wacom is part of X11. xf86-input-wacom: xf86-input-wacom: For more information about the X.Org Foundation (the providers of the xf86-input-wacom: X.Org implementation of the X Window System), see their website: xf86-input-wacom: xf86-input-wacom: http://www.x.org xf86-input-wacom: xf86-input-wacom: xf86-input-wacom: PACKAGE NAME: xf86-video-apm-1.2.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 64 K PACKAGE SIZE (uncompressed): 200 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-apm: xf86-video-apm xf86-video-apm: xf86-video-apm: xf86-video-apm is part of X11. xf86-video-apm: xf86-video-apm: For more information about the X.Org Foundation (the providers of the xf86-video-apm: X.Org implementation of the X Window System), see their website: xf86-video-apm: xf86-video-apm: http://www.x.org xf86-video-apm: xf86-video-apm: xf86-video-apm: PACKAGE NAME: xf86-video-ark-0.7.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 19 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-ark: xf86-video-ark xf86-video-ark: xf86-video-ark: xf86-video-ark is part of X11. xf86-video-ark: xf86-video-ark: For more information about the X.Org Foundation (the providers of the xf86-video-ark: X.Org implementation of the X Window System), see their website: xf86-video-ark: xf86-video-ark: http://www.x.org xf86-video-ark: xf86-video-ark: xf86-video-ark: PACKAGE NAME: xf86-video-ast-0.91.10-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 26 K PACKAGE SIZE (uncompressed): 80 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-ast: xf86-video-ast xf86-video-ast: xf86-video-ast: xf86-video-ast is part of X11. xf86-video-ast: xf86-video-ast: For more information about the X.Org Foundation (the providers of the xf86-video-ast: X.Org implementation of the X Window System), see their website: xf86-video-ast: xf86-video-ast: http://www.x.org xf86-video-ast: xf86-video-ast: xf86-video-ast: PACKAGE NAME: xf86-video-ati-6.14.1-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 351 K PACKAGE SIZE (uncompressed): 1250 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-ati: xf86-video-ati xf86-video-ati: xf86-video-ati: xf86-video-ati is part of X11. xf86-video-ati: xf86-video-ati: For more information about the X.Org Foundation (the providers of the xf86-video-ati: X.Org implementation of the X Window System), see their website: xf86-video-ati: xf86-video-ati: http://www.x.org xf86-video-ati: xf86-video-ati: xf86-video-ati: PACKAGE NAME: xf86-video-chips-1.2.4-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 87 K PACKAGE SIZE (uncompressed): 270 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-chips: xf86-video-chips xf86-video-chips: xf86-video-chips: xf86-video-chips is part of X11. xf86-video-chips: xf86-video-chips: For more information about the X.Org Foundation (the providers of the xf86-video-chips: X.Org implementation of the X Window System), see their website: xf86-video-chips: xf86-video-chips: http://www.x.org xf86-video-chips: xf86-video-chips: xf86-video-chips: PACKAGE NAME: xf86-video-cirrus-1.3.2-x86_64-3.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 35 K PACKAGE SIZE (uncompressed): 120 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-cirrus: xf86-video-cirrus xf86-video-cirrus: xf86-video-cirrus: xf86-video-cirrus is part of X11. xf86-video-cirrus: xf86-video-cirrus: For more information about the X.Org Foundation (the providers of the xf86-video-cirrus: X.Org implementation of the X Window System), see their website: xf86-video-cirrus: xf86-video-cirrus: http://www.x.org xf86-video-cirrus: xf86-video-cirrus: xf86-video-cirrus: PACKAGE NAME: xf86-video-dummy-0.3.4-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 12 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-dummy: xf86-video-dummy xf86-video-dummy: xf86-video-dummy: xf86-video-dummy is part of X11. xf86-video-dummy: xf86-video-dummy: For more information about the X.Org Foundation (the providers of the xf86-video-dummy: X.Org implementation of the X Window System), see their website: xf86-video-dummy: xf86-video-dummy: http://www.x.org xf86-video-dummy: xf86-video-dummy: xf86-video-dummy: PACKAGE NAME: xf86-video-glint-1.2.5-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 91 K PACKAGE SIZE (uncompressed): 340 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-glint: xf86-video-glint xf86-video-glint: xf86-video-glint: xf86-video-glint is part of X11. xf86-video-glint: xf86-video-glint: For more information about the X.Org Foundation (the providers of the xf86-video-glint: X.Org implementation of the X Window System), see their website: xf86-video-glint: xf86-video-glint: http://www.x.org xf86-video-glint: xf86-video-glint: xf86-video-glint: PACKAGE NAME: xf86-video-i128-1.3.4-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 31 K PACKAGE SIZE (uncompressed): 100 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-i128: xf86-video-i128 xf86-video-i128: xf86-video-i128: xf86-video-i128 is part of X11. xf86-video-i128: xf86-video-i128: For more information about the X.Org Foundation (the providers of the xf86-video-i128: X.Org implementation of the X Window System), see their website: xf86-video-i128: xf86-video-i128: http://www.x.org xf86-video-i128: xf86-video-i128: xf86-video-i128: PACKAGE NAME: xf86-video-i740-1.3.2-x86_64-3.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 24 K PACKAGE SIZE (uncompressed): 80 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-i740: xf86-video-i740 xf86-video-i740: xf86-video-i740: xf86-video-i740 is part of X11. xf86-video-i740: xf86-video-i740: For more information about the X.Org Foundation (the providers of the xf86-video-i740: X.Org implementation of the X Window System), see their website: xf86-video-i740: xf86-video-i740: http://www.x.org xf86-video-i740: xf86-video-i740: xf86-video-i740: PACKAGE NAME: xf86-video-intel-2.15.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 191 K PACKAGE SIZE (uncompressed): 890 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-intel: xf86-video-intel xf86-video-intel: xf86-video-intel: xf86-video-intel is part of X11. xf86-video-intel: xf86-video-intel: For more information about the X.Org Foundation (the providers of the xf86-video-intel: X.Org implementation of the X Window System), see their website: xf86-video-intel: xf86-video-intel: http://www.x.org xf86-video-intel: xf86-video-intel: xf86-video-intel: PACKAGE NAME: xf86-video-mach64-6.8.2-x86_64-3.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 93 K PACKAGE SIZE (uncompressed): 320 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-mach64: xf86-video-mach64 xf86-video-mach64: xf86-video-mach64: xf86-video-mach64 is part of X11. xf86-video-mach64: xf86-video-mach64: For more information about the X.Org Foundation (the providers of the xf86-video-mach64: X.Org implementation of the X Window System), see their website: xf86-video-mach64: xf86-video-mach64: http://www.x.org xf86-video-mach64: xf86-video-mach64: xf86-video-mach64: PACKAGE NAME: xf86-video-mga-1.4.13-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 90 K PACKAGE SIZE (uncompressed): 260 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-mga: xf86-video-mga xf86-video-mga: xf86-video-mga: xf86-video-mga is part of X11. xf86-video-mga: xf86-video-mga: For more information about the X.Org Foundation (the providers of the xf86-video-mga: X.Org implementation of the X Window System), see their website: xf86-video-mga: xf86-video-mga: http://www.x.org xf86-video-mga: xf86-video-mga: xf86-video-mga: PACKAGE NAME: xf86-video-neomagic-1.2.5-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 39 K PACKAGE SIZE (uncompressed): 120 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-neomagic: xf86-video-neomagic xf86-video-neomagic: xf86-video-neomagic: xf86-video-neomagic is part of X11. xf86-video-neomagic: xf86-video-neomagic: For more information about the X.Org Foundation (the providers of the xf86-video-neomagic: X.Org implementation of the X Window System), see their website: xf86-video-neomagic: xf86-video-neomagic: http://www.x.org xf86-video-neomagic: xf86-video-neomagic: xf86-video-neomagic: PACKAGE NAME: xf86-video-nouveau-8bb82312-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 71 K PACKAGE SIZE (uncompressed): 220 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-nouveau: xf86-video-nouveau xf86-video-nouveau: xf86-video-nouveau: xf86-video-nouveau is part of X11. xf86-video-nouveau: xf86-video-nouveau: For more information about the X.Org Foundation (the providers of the xf86-video-nouveau: X.Org implementation of the X Window System), see their website: xf86-video-nouveau: xf86-video-nouveau: http://www.x.org xf86-video-nouveau: xf86-video-nouveau: xf86-video-nouveau: PACKAGE NAME: xf86-video-nv-2.1.18-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 86 K PACKAGE SIZE (uncompressed): 260 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-nv: xf86-video-nv xf86-video-nv: xf86-video-nv: xf86-video-nv is part of X11. xf86-video-nv: xf86-video-nv: For more information about the X.Org Foundation (the providers of the xf86-video-nv: X.Org implementation of the X Window System), see their website: xf86-video-nv: xf86-video-nv: http://www.x.org xf86-video-nv: xf86-video-nv: xf86-video-nv: PACKAGE NAME: xf86-video-openchrome-0.2.904-x86_64-2.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 137 K PACKAGE SIZE (uncompressed): 520 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-openchrome: xf86-video-openchrome xf86-video-openchrome: xf86-video-openchrome: xf86-video-openchrome is part of X11. xf86-video-openchrome: xf86-video-openchrome: For more information about the X.Org Foundation (the providers of the xf86-video-openchrome: X.Org implementation of the X Window System), see their website: xf86-video-openchrome: xf86-video-openchrome: http://www.x.org xf86-video-openchrome: xf86-video-openchrome: xf86-video-openchrome: PACKAGE NAME: xf86-video-r128-6.8.1-x86_64-3.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 55 K PACKAGE SIZE (uncompressed): 170 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-r128: xf86-video-r128 xf86-video-r128: xf86-video-r128: xf86-video-r128 is part of X11. xf86-video-r128: xf86-video-r128: For more information about the X.Org Foundation (the providers of the xf86-video-r128: X.Org implementation of the X Window System), see their website: xf86-video-r128: xf86-video-r128: http://www.x.org xf86-video-r128: xf86-video-r128: xf86-video-r128: PACKAGE NAME: xf86-video-radeonhd-1.3.0-x86_64-2.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 197 K PACKAGE SIZE (uncompressed): 590 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-radeonhd: xf86-video-radeonhd (driver for AMD GPG (ATI) R5xx/R6xx chipsets) xf86-video-radeonhd: xf86-video-radeonhd: xf86-video-radeonhd is part of X11. xf86-video-radeonhd: xf86-video-radeonhd: For more information about the X.Org Foundation (the providers of the xf86-video-radeonhd: X.Org implementation of the X Window System), see their website: xf86-video-radeonhd: xf86-video-radeonhd: http://www.x.org xf86-video-radeonhd: xf86-video-radeonhd: xf86-video-radeonhd: PACKAGE NAME: xf86-video-rendition-4.2.4-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 43 K PACKAGE SIZE (uncompressed): 150 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-rendition: xf86-video-rendition xf86-video-rendition: xf86-video-rendition: xf86-video-rendition is part of X11. xf86-video-rendition: xf86-video-rendition: For more information about the X.Org Foundation (the providers of the xf86-video-rendition: X.Org implementation of the X Window System), see their website: xf86-video-rendition: xf86-video-rendition: http://www.x.org xf86-video-rendition: xf86-video-rendition: xf86-video-rendition: PACKAGE NAME: xf86-video-s3-0.6.3-x86_64-3.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 30 K PACKAGE SIZE (uncompressed): 90 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-s3: xf86-video-s3 xf86-video-s3: xf86-video-s3: xf86-video-s3 is part of X11. xf86-video-s3: xf86-video-s3: For more information about the X.Org Foundation (the providers of the xf86-video-s3: X.Org implementation of the X Window System), see their website: xf86-video-s3: xf86-video-s3: http://www.x.org xf86-video-s3: xf86-video-s3: xf86-video-s3: PACKAGE NAME: xf86-video-s3virge-1.10.4-x86_64-3.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 41 K PACKAGE SIZE (uncompressed): 120 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-s3virge: xf86-video-s3virge xf86-video-s3virge: xf86-video-s3virge: xf86-video-s3virge is part of X11. xf86-video-s3virge: xf86-video-s3virge: For more information about the X.Org Foundation (the providers of the xf86-video-s3virge: X.Org implementation of the X Window System), see their website: xf86-video-s3virge: xf86-video-s3virge: http://www.x.org xf86-video-s3virge: xf86-video-s3virge: xf86-video-s3virge: PACKAGE NAME: xf86-video-savage-2.3.2-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 72 K PACKAGE SIZE (uncompressed): 210 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-savage: xf86-video-savage xf86-video-savage: xf86-video-savage: xf86-video-savage is part of X11. xf86-video-savage: xf86-video-savage: For more information about the X.Org Foundation (the providers of the xf86-video-savage: X.Org implementation of the X Window System), see their website: xf86-video-savage: xf86-video-savage: http://www.x.org xf86-video-savage: xf86-video-savage: xf86-video-savage: PACKAGE NAME: xf86-video-siliconmotion-1.7.5-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 64 K PACKAGE SIZE (uncompressed): 190 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-siliconmotion: xf86-video-siliconmotion xf86-video-siliconmotion: xf86-video-siliconmotion: xf86-video-siliconmotion is part of X11. xf86-video-siliconmotion: xf86-video-siliconmotion: For more information about the X.Org Foundation (the providers of the xf86-video-siliconmotion: X.Org implementation of the X Window System), see their website: xf86-video-siliconmotion: xf86-video-siliconmotion: http://www.x.org xf86-video-siliconmotion: xf86-video-siliconmotion: xf86-video-siliconmotion: PACKAGE NAME: xf86-video-sis-0.10.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 243 K PACKAGE SIZE (uncompressed): 650 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-sis: xf86-video-sis xf86-video-sis: xf86-video-sis: xf86-video-sis is part of X11. xf86-video-sis: xf86-video-sis: For more information about the X.Org Foundation (the providers of the xf86-video-sis: X.Org implementation of the X Window System), see their website: xf86-video-sis: xf86-video-sis: http://www.x.org xf86-video-sis: xf86-video-sis: xf86-video-sis: PACKAGE NAME: xf86-video-sisusb-0.9.4-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 45 K PACKAGE SIZE (uncompressed): 130 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-sisusb: xf86-video-sisusb xf86-video-sisusb: xf86-video-sisusb: xf86-video-sisusb is part of X11. xf86-video-sisusb: xf86-video-sisusb: For more information about the X.Org Foundation (the providers of the xf86-video-sisusb: X.Org implementation of the X Window System), see their website: xf86-video-sisusb: xf86-video-sisusb: http://www.x.org xf86-video-sisusb: xf86-video-sisusb: xf86-video-sisusb: PACKAGE NAME: xf86-video-tdfx-1.4.3-x86_64-3.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 30 K PACKAGE SIZE (uncompressed): 90 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-tdfx: xf86-video-tdfx xf86-video-tdfx: xf86-video-tdfx: xf86-video-tdfx is part of X11. xf86-video-tdfx: xf86-video-tdfx: For more information about the X.Org Foundation (the providers of the xf86-video-tdfx: X.Org implementation of the X Window System), see their website: xf86-video-tdfx: xf86-video-tdfx: http://www.x.org xf86-video-tdfx: xf86-video-tdfx: xf86-video-tdfx: PACKAGE NAME: xf86-video-tga-1.2.1-x86_64-2.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 23 K PACKAGE SIZE (uncompressed): 80 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-tga: xf86-video-tga xf86-video-tga: xf86-video-tga: xf86-video-tga is part of X11. xf86-video-tga: xf86-video-tga: For more information about the X.Org Foundation (the providers of the xf86-video-tga: X.Org implementation of the X Window System), see their website: xf86-video-tga: xf86-video-tga: http://www.x.org xf86-video-tga: xf86-video-tga: xf86-video-tga: PACKAGE NAME: xf86-video-trident-1.3.4-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 67 K PACKAGE SIZE (uncompressed): 210 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-trident: xf86-video-trident xf86-video-trident: xf86-video-trident: xf86-video-trident is part of X11. xf86-video-trident: xf86-video-trident: For more information about the X.Org Foundation (the providers of the xf86-video-trident: X.Org implementation of the X Window System), see their website: xf86-video-trident: xf86-video-trident: http://www.x.org xf86-video-trident: xf86-video-trident: xf86-video-trident: PACKAGE NAME: xf86-video-tseng-1.2.4-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 30 K PACKAGE SIZE (uncompressed): 100 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-tseng: xf86-video-tseng xf86-video-tseng: xf86-video-tseng: xf86-video-tseng is part of X11. xf86-video-tseng: xf86-video-tseng: For more information about the X.Org Foundation (the providers of the xf86-video-tseng: X.Org implementation of the X Window System), see their website: xf86-video-tseng: xf86-video-tseng: http://www.x.org xf86-video-tseng: xf86-video-tseng: xf86-video-tseng: PACKAGE NAME: xf86-video-v4l-0.2.0-x86_64-4.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 9 K PACKAGE SIZE (uncompressed): 40 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-v4l: xf86-video-v4l xf86-video-v4l: xf86-video-v4l: xf86-video-v4l is part of X11. xf86-video-v4l: xf86-video-v4l: For more information about the X.Org Foundation (the providers of the xf86-video-v4l: X.Org implementation of the X Window System), see their website: xf86-video-v4l: xf86-video-v4l: http://www.x.org xf86-video-v4l: xf86-video-v4l: xf86-video-v4l: PACKAGE NAME: xf86-video-vesa-2.3.0-x86_64-3.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 25 K PACKAGE SIZE (uncompressed): 80 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-vesa: xf86-video-vesa xf86-video-vesa: xf86-video-vesa: xf86-video-vesa is part of X11. xf86-video-vesa: xf86-video-vesa: For more information about the X.Org Foundation (the providers of the xf86-video-vesa: X.Org implementation of the X Window System), see their website: xf86-video-vesa: xf86-video-vesa: http://www.x.org xf86-video-vesa: xf86-video-vesa: xf86-video-vesa: PACKAGE NAME: xf86-video-vmware-11.0.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 38 K PACKAGE SIZE (uncompressed): 130 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-vmware: xf86-video-vmware xf86-video-vmware: xf86-video-vmware: xf86-video-vmware is part of X11. xf86-video-vmware: xf86-video-vmware: For more information about the X.Org Foundation (the providers of the xf86-video-vmware: X.Org implementation of the X Window System), see their website: xf86-video-vmware: xf86-video-vmware: http://www.x.org xf86-video-vmware: xf86-video-vmware: xf86-video-vmware: PACKAGE NAME: xf86-video-voodoo-1.2.4-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 20 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-voodoo: xf86-video-voodoo xf86-video-voodoo: xf86-video-voodoo: xf86-video-voodoo is part of X11. xf86-video-voodoo: xf86-video-voodoo: For more information about the X.Org Foundation (the providers of the xf86-video-voodoo: X.Org implementation of the X Window System), see their website: xf86-video-voodoo: xf86-video-voodoo: http://www.x.org xf86-video-voodoo: xf86-video-voodoo: xf86-video-voodoo: PACKAGE NAME: xf86-video-xgi-1.6.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 121 K PACKAGE SIZE (uncompressed): 330 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86-video-xgi: xf86-video-xgi xf86-video-xgi: xf86-video-xgi: xf86-video-xgi is part of X11. xf86-video-xgi: xf86-video-xgi: For more information about the X.Org Foundation (the providers of the xf86-video-xgi: X.Org implementation of the X Window System), see their website: xf86-video-xgi: xf86-video-xgi: http://www.x.org xf86-video-xgi: xf86-video-xgi: xf86-video-xgi: PACKAGE NAME: xf86bigfontproto-1.2.0-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 4 K PACKAGE SIZE (uncompressed): 30 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86bigfontproto: xf86bigfontproto xf86bigfontproto: xf86bigfontproto: xf86bigfontproto is part of X11. xf86bigfontproto: xf86bigfontproto: For more information about the X.Org Foundation (the providers of the xf86bigfontproto: X.Org implementation of the X Window System), see their website: xf86bigfontproto: xf86bigfontproto: http://www.x.org xf86bigfontproto: xf86bigfontproto: xf86bigfontproto: PACKAGE NAME: xf86dga-1.0.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 13 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86dga: xf86dga xf86dga: xf86dga: xf86dga is part of X11. xf86dga: xf86dga: For more information about the X.Org Foundation (the providers of the xf86dga: X.Org implementation of the X Window System), see their website: xf86dga: xf86dga: http://www.x.org xf86dga: xf86dga: xf86dga: PACKAGE NAME: xf86dgaproto-2.1-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 7 K PACKAGE SIZE (uncompressed): 40 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86dgaproto: xf86dgaproto xf86dgaproto: xf86dgaproto: xf86dgaproto is part of X11. xf86dgaproto: xf86dgaproto: For more information about the X.Org Foundation (the providers of the xf86dgaproto: X.Org implementation of the X Window System), see their website: xf86dgaproto: xf86dgaproto: http://www.x.org xf86dgaproto: xf86dgaproto: xf86dgaproto: PACKAGE NAME: xf86driproto-2.1.1-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 10 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86driproto: xf86driproto xf86driproto: xf86driproto: xf86driproto is part of X11. xf86driproto: xf86driproto: For more information about the X.Org Foundation (the providers of the xf86driproto: X.Org implementation of the X Window System), see their website: xf86driproto: xf86driproto: http://www.x.org xf86driproto: xf86driproto: xf86driproto: PACKAGE NAME: xf86miscproto-0.9.3-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 6 K PACKAGE SIZE (uncompressed): 30 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86miscproto: xf86miscproto xf86miscproto: xf86miscproto: xf86miscproto is part of X11. xf86miscproto: xf86miscproto: For more information about the X.Org Foundation (the providers of the xf86miscproto: X.Org implementation of the X Window System), see their website: xf86miscproto: xf86miscproto: http://www.x.org xf86miscproto: xf86miscproto: xf86miscproto: PACKAGE NAME: xf86vidmodeproto-2.3.1-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 11 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xf86vidmodeproto: xf86vidmodeproto xf86vidmodeproto: xf86vidmodeproto: xf86vidmodeproto is part of X11. xf86vidmodeproto: xf86vidmodeproto: For more information about the X.Org Foundation (the providers of the xf86vidmodeproto: X.Org implementation of the X Window System), see their website: xf86vidmodeproto: xf86vidmodeproto: http://www.x.org xf86vidmodeproto: xf86vidmodeproto: xf86vidmodeproto: PACKAGE NAME: xfd-1.1.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 24 K PACKAGE SIZE (uncompressed): 80 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xfd: xfd xfd: xfd: xfd is part of X11. xfd: xfd: For more information about the X.Org Foundation (the providers of the xfd: X.Org implementation of the X Window System), see their website: xfd: xfd: http://www.x.org xfd: xfd: xfd: PACKAGE NAME: xfontsel-1.0.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 30 K PACKAGE SIZE (uncompressed): 90 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xfontsel: xfontsel xfontsel: xfontsel: xfontsel is part of X11. xfontsel: xfontsel: For more information about the X.Org Foundation (the providers of the xfontsel: X.Org implementation of the X Window System), see their website: xfontsel: xfontsel: http://www.x.org xfontsel: xfontsel: xfontsel: PACKAGE NAME: xfs-1.1.1-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 72 K PACKAGE SIZE (uncompressed): 200 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xfs: xfs xfs: xfs: xfs is part of X11. xfs: xfs: For more information about the X.Org Foundation (the providers of the xfs: X.Org implementation of the X Window System), see their website: xfs: xfs: http://www.x.org xfs: xfs: xfs: PACKAGE NAME: xfsinfo-1.0.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 14 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xfsinfo: xfsinfo xfsinfo: xfsinfo: xfsinfo is part of X11. xfsinfo: xfsinfo: For more information about the X.Org Foundation (the providers of the xfsinfo: X.Org implementation of the X Window System), see their website: xfsinfo: xfsinfo: http://www.x.org xfsinfo: xfsinfo: xfsinfo: PACKAGE NAME: xgamma-1.0.4-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 14 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xgamma: xgamma xgamma: xgamma: xgamma is part of X11. xgamma: xgamma: For more information about the X.Org Foundation (the providers of the xgamma: X.Org implementation of the X Window System), see their website: xgamma: xgamma: http://www.x.org xgamma: xgamma: xgamma: PACKAGE NAME: xgc-1.0.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 37 K PACKAGE SIZE (uncompressed): 120 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xgc: xgc xgc: xgc: xgc is part of X11. xgc: xgc: For more information about the X.Org Foundation (the providers of the xgc: X.Org implementation of the X Window System), see their website: xgc: xgc: http://www.x.org xgc: xgc: xgc: PACKAGE NAME: xhost-1.0.4-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 19 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xhost: xhost xhost: xhost: xhost is part of X11. xhost: xhost: For more information about the X.Org Foundation (the providers of the xhost: X.Org implementation of the X Window System), see their website: xhost: xhost: http://www.x.org xhost: xhost: xhost: PACKAGE NAME: xineramaproto-1.2.1-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 10 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xineramaproto: xineramaproto xineramaproto: xineramaproto: xineramaproto is part of X11. xineramaproto: xineramaproto: For more information about the X.Org Foundation (the providers of the xineramaproto: X.Org implementation of the X Window System), see their website: xineramaproto: xineramaproto: http://www.x.org xineramaproto: xineramaproto: xineramaproto: PACKAGE NAME: xinit-1.3.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 28 K PACKAGE SIZE (uncompressed): 90 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xinit: xinit xinit: xinit: xinit is part of X11. xinit: xinit: For more information about the X.Org Foundation (the providers of the xinit: X.Org implementation of the X Window System), see their website: xinit: xinit: http://www.x.org xinit: xinit: xinit: PACKAGE NAME: xinput-1.5.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 33 K PACKAGE SIZE (uncompressed): 110 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xinput: xinput xinput: xinput: xinput is a utility to configure and test XInput devices. It wasn't xinput: originally designed to be the primary tool for doing this but it's xinput: still pretty much the only program out there for doing it. :-) xinput: xinput: xinput is part of X11. xinput: xinput: For more information about the X.Org Foundation (the providers of the xinput: X.Org implementation of the X Window System), see their website: xinput: http://www.x.org PACKAGE NAME: xkbcomp-1.2.1-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 95 K PACKAGE SIZE (uncompressed): 270 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xkbcomp: xkbcomp xkbcomp: xkbcomp: xkbcomp is part of X11. xkbcomp: xkbcomp: For more information about the X.Org Foundation (the providers of the xkbcomp: X.Org implementation of the X Window System), see their website: xkbcomp: xkbcomp: http://www.x.org xkbcomp: xkbcomp: xkbcomp: PACKAGE NAME: xkbevd-1.1.2-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 26 K PACKAGE SIZE (uncompressed): 80 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xkbevd: xkbevd xkbevd: xkbevd: xkbevd is part of X11. xkbevd: xkbevd: For more information about the X.Org Foundation (the providers of the xkbevd: X.Org implementation of the X Window System), see their website: xkbevd: xkbevd: http://www.x.org xkbevd: xkbevd: xkbevd: PACKAGE NAME: xkbprint-1.0.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 50 K PACKAGE SIZE (uncompressed): 140 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xkbprint: xkbprint xkbprint: xkbprint: xkbprint is part of X11. xkbprint: xkbprint: For more information about the X.Org Foundation (the providers of the xkbprint: X.Org implementation of the X Window System), see their website: xkbprint: xkbprint: http://www.x.org xkbprint: xkbprint: xkbprint: PACKAGE NAME: xkbutils-1.0.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 26 K PACKAGE SIZE (uncompressed): 100 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xkbutils: xkbutils xkbutils: xkbutils: xkbutils is part of X11. xkbutils: xkbutils: For more information about the X.Org Foundation (the providers of the xkbutils: X.Org implementation of the X Window System), see their website: xkbutils: xkbutils: http://www.x.org xkbutils: xkbutils: xkbutils: PACKAGE NAME: xkeyboard-config-2.2.1-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 477 K PACKAGE SIZE (uncompressed): 4800 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xkeyboard-config: xkeyboard-config xkeyboard-config: xkeyboard-config: xkeyboard-config is part of X11. xkeyboard-config: xkeyboard-config: For more information about the X.Org Foundation (the providers of the xkeyboard-config: X.Org implementation of the X Window System), see their website: xkeyboard-config: xkeyboard-config: http://www.x.org xkeyboard-config: xkeyboard-config: xkeyboard-config: PACKAGE NAME: xkill-1.0.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 16 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xkill: xkill xkill: xkill: xkill is part of X11. xkill: xkill: For more information about the X.Org Foundation (the providers of the xkill: X.Org implementation of the X Window System), see their website: xkill: xkill: http://www.x.org xkill: xkill: xkill: PACKAGE NAME: xload-1.1.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 19 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xload: xload xload: xload: xload is part of X11. xload: xload: For more information about the X.Org Foundation (the providers of the xload: X.Org implementation of the X Window System), see their website: xload: xload: http://www.x.org xload: xload: xload: PACKAGE NAME: xlogo-1.0.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 20 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xlogo: xlogo xlogo: xlogo: xlogo is part of X11. xlogo: xlogo: For more information about the X.Org Foundation (the providers of the xlogo: X.Org implementation of the X Window System), see their website: xlogo: xlogo: http://www.x.org xlogo: xlogo: xlogo: PACKAGE NAME: xlsatoms-1.1.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 14 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xlsatoms: xlsatoms xlsatoms: xlsatoms: xlsatoms is part of X11. xlsatoms: xlsatoms: For more information about the X.Org Foundation (the providers of the xlsatoms: X.Org implementation of the X Window System), see their website: xlsatoms: xlsatoms: http://www.x.org xlsatoms: xlsatoms: xlsatoms: PACKAGE NAME: xlsclients-1.1.1-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 17 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xlsclients: xlsclients xlsclients: xlsclients: xlsclients is part of X11. xlsclients: xlsclients: For more information about the X.Org Foundation (the providers of the xlsclients: X.Org implementation of the X Window System), see their website: xlsclients: xlsclients: http://www.x.org xlsclients: xlsclients: xlsclients: PACKAGE NAME: xlsfonts-1.0.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 18 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xlsfonts: xlsfonts xlsfonts: xlsfonts: xlsfonts is part of X11. xlsfonts: xlsfonts: For more information about the X.Org Foundation (the providers of the xlsfonts: X.Org implementation of the X Window System), see their website: xlsfonts: xlsfonts: http://www.x.org xlsfonts: xlsfonts: xlsfonts: PACKAGE NAME: xmag-1.0.4-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 26 K PACKAGE SIZE (uncompressed): 90 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xmag: xmag xmag: xmag: xmag is part of X11. xmag: xmag: For more information about the X.Org Foundation (the providers of the xmag: X.Org implementation of the X Window System), see their website: xmag: xmag: http://www.x.org xmag: xmag: xmag: PACKAGE NAME: xman-1.1.1-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 46 K PACKAGE SIZE (uncompressed): 140 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xman: xman xman: xman: xman is part of X11. xman: xman: For more information about the X.Org Foundation (the providers of the xman: X.Org implementation of the X Window System), see their website: xman: xman: http://www.x.org xman: xman: xman: PACKAGE NAME: xmessage-1.0.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 19 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xmessage: xmessage xmessage: xmessage: xmessage is part of X11. xmessage: xmessage: For more information about the X.Org Foundation (the providers of the xmessage: X.Org implementation of the X Window System), see their website: xmessage: xmessage: http://www.x.org xmessage: xmessage: xmessage: PACKAGE NAME: xmh-1.0.2-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 79 K PACKAGE SIZE (uncompressed): 190 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xmh: xmh xmh: xmh: xmh is part of X11. xmh: xmh: For more information about the X.Org Foundation (the providers of the xmh: X.Org implementation of the X Window System), see their website: xmh: xmh: http://www.x.org xmh: xmh: xmh: PACKAGE NAME: xmodmap-1.0.5-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 29 K PACKAGE SIZE (uncompressed): 80 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xmodmap: xmodmap xmodmap: xmodmap: xmodmap is part of X11. xmodmap: xmodmap: For more information about the X.Org Foundation (the providers of the xmodmap: X.Org implementation of the X Window System), see their website: xmodmap: xmodmap: http://www.x.org xmodmap: xmodmap: xmodmap: PACKAGE NAME: xmore-1.0.2-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 13 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xmore: xmore xmore: xmore: xmore is part of X11. xmore: xmore: For more information about the X.Org Foundation (the providers of the xmore: X.Org implementation of the X Window System), see their website: xmore: xmore: http://www.x.org xmore: xmore: xmore: PACKAGE NAME: xorg-cf-files-1.0.4-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 181 K PACKAGE SIZE (uncompressed): 1320 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xorg-cf-files: xorg-cf-files xorg-cf-files: xorg-cf-files: xorg-cf-files is part of X11. xorg-cf-files: xorg-cf-files: For more information about the X.Org Foundation (the providers of the xorg-cf-files: X.Org implementation of the X Window System), see their website: xorg-cf-files: xorg-cf-files: http://www.x.org xorg-cf-files: xorg-cf-files: xorg-cf-files: PACKAGE NAME: xorg-docs-1.6-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 248 K PACKAGE SIZE (uncompressed): 1800 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xorg-docs: xorg-docs xorg-docs: xorg-docs: xorg-docs is part of X11. xorg-docs: xorg-docs: For more information about the X.Org Foundation (the providers of the xorg-docs: X.Org implementation of the X Window System), see their website: xorg-docs: xorg-docs: http://www.x.org xorg-docs: xorg-docs: xorg-docs: PACKAGE NAME: xorg-server-1.9.5-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 1878 K PACKAGE SIZE (uncompressed): 9070 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xorg-server: xorg-server (The Xorg server, the core of the X Window System) xorg-server: xorg-server: Xorg is a full featured X server that was originally designed for UNIX xorg-server: and UNIX-like operating systems running on Intel x86 hardware. It now xorg-server: runs on a wider range of hardware and OS platforms. This work was xorg-server: derived by the X.Org Foundation from the XFree86 Project's XFree86 xorg-server: 4.4rc2 release. The XFree86 release was originally derived from X386 xorg-server: 1.2 by Thomas Roell which was contributed to X11R5 by Snitily Graphics xorg-server: Consulting Service. xorg-server: xorg-server: The home page for the X project is: http://www.x.org PACKAGE NAME: xorg-sgml-doctools-1.7-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 19 K PACKAGE SIZE (uncompressed): 150 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xorg-sgml-doctools: xorg-sgml-doctools xorg-sgml-doctools: xorg-sgml-doctools: xorg-sgml-doctools is part of X11. xorg-sgml-doctools: xorg-sgml-doctools: For more information about the X.Org Foundation (the providers of the xorg-sgml-doctools: X.Org implementation of the X Window System), see their website: xorg-sgml-doctools: xorg-sgml-doctools: http://www.x.org xorg-sgml-doctools: xorg-sgml-doctools: xorg-sgml-doctools: PACKAGE NAME: xpr-1.0.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 31 K PACKAGE SIZE (uncompressed): 80 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xpr: xpr xpr: xpr: xpr is part of X11. xpr: xpr: For more information about the X.Org Foundation (the providers of the xpr: X.Org implementation of the X Window System), see their website: xpr: xpr: http://www.x.org xpr: xpr: xpr: PACKAGE NAME: xprop-1.2.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 33 K PACKAGE SIZE (uncompressed): 90 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xprop: xprop xprop: xprop: xprop is part of X11. xprop: xprop: For more information about the X.Org Foundation (the providers of the xprop: X.Org implementation of the X Window System), see their website: xprop: xprop: http://www.x.org xprop: xprop: xprop: PACKAGE NAME: xproto-7.0.21-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 188 K PACKAGE SIZE (uncompressed): 2040 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xproto: xproto xproto: xproto: xproto is part of X11. xproto: xproto: For more information about the X.Org Foundation (the providers of the xproto: X.Org implementation of the X Window System), see their website: xproto: xproto: http://www.x.org xproto: xproto: xproto: PACKAGE NAME: xpyb-1.2-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 106 K PACKAGE SIZE (uncompressed): 1830 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xpyb: xpyb xpyb: xpyb: xpyb is part of X11. xpyb: xpyb: For more information about the X.Org Foundation (the providers of the xpyb: X.Org implementation of the X Window System), see their website: xpyb: xpyb: http://www.x.org xpyb: xpyb: xpyb: PACKAGE NAME: xrandr-1.3.4-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 46 K PACKAGE SIZE (uncompressed): 130 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xrandr: xrandr xrandr: xrandr: xrandr is part of X11. xrandr: xrandr: For more information about the X.Org Foundation (the providers of the xrandr: X.Org implementation of the X Window System), see their website: xrandr: xrandr: http://www.x.org xrandr: xrandr: xrandr: PACKAGE NAME: xrdb-1.0.9-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 23 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xrdb: xrdb xrdb: xrdb: xrdb is part of X11. xrdb: xrdb: For more information about the X.Org Foundation (the providers of the xrdb: X.Org implementation of the X Window System), see their website: xrdb: xrdb: http://www.x.org xrdb: xrdb: xrdb: PACKAGE NAME: xrefresh-1.0.4-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 14 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xrefresh: xrefresh xrefresh: xrefresh: xrefresh is part of X11. xrefresh: xrefresh: For more information about the X.Org Foundation (the providers of the xrefresh: X.Org implementation of the X Window System), see their website: xrefresh: xrefresh: http://www.x.org xrefresh: xrefresh: xrefresh: PACKAGE NAME: xscope-1.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 97 K PACKAGE SIZE (uncompressed): 370 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xscope: xscope xscope: xscope: xscope is part of X11. xscope: xscope: For more information about the X.Org Foundation (the providers of the xscope: X.Org implementation of the X Window System), see their website: xscope: xscope: http://www.x.org xscope: xscope: xscope: PACKAGE NAME: xset-1.2.1-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 31 K PACKAGE SIZE (uncompressed): 90 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xset: xset xset: xset: xset is part of X11. xset: xset: For more information about the X.Org Foundation (the providers of the xset: X.Org implementation of the X Window System), see their website: xset: xset: http://www.x.org xset: xset: xset: PACKAGE NAME: xsetroot-1.1.0-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 17 K PACKAGE SIZE (uncompressed): 60 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xsetroot: xsetroot xsetroot: xsetroot: xsetroot is part of X11. xsetroot: xsetroot: For more information about the X.Org Foundation (the providers of the xsetroot: X.Org implementation of the X Window System), see their website: xsetroot: xsetroot: http://www.x.org xsetroot: xsetroot: xsetroot: PACKAGE NAME: xsm-1.0.2-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 51 K PACKAGE SIZE (uncompressed): 150 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xsm: xsm xsm: xsm: xsm is part of X11. xsm: xsm: For more information about the X.Org Foundation (the providers of the xsm: X.Org implementation of the X Window System), see their website: xsm: xsm: http://www.x.org xsm: xsm: xsm: PACKAGE NAME: xstdcmap-1.0.2-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 15 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xstdcmap: xstdcmap xstdcmap: xstdcmap: xstdcmap is part of X11. xstdcmap: xstdcmap: For more information about the X.Org Foundation (the providers of the xstdcmap: X.Org implementation of the X Window System), see their website: xstdcmap: xstdcmap: http://www.x.org xstdcmap: xstdcmap: xstdcmap: PACKAGE NAME: xterm-267-x86_64-1.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 236 K PACKAGE SIZE (uncompressed): 640 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xterm: xterm (terminal emulator for X) xterm: xterm: The xterm program is a terminal emulator for the X Window System. xterm: It provides DEC VT102/VT220 (VTxxx) and Tektronix 4014 compatible xterm: terminals for programs that cannot use the window system directly. xterm: xterm: xterm: xterm: xterm: xterm: PACKAGE NAME: xtrans-1.2.6-noarch-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 62 K PACKAGE SIZE (uncompressed): 380 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xtrans: xtrans xtrans: xtrans: xtrans is part of X11. xtrans: xtrans: For more information about the X.Org Foundation (the providers of the xtrans: X.Org implementation of the X Window System), see their website: xtrans: xtrans: http://www.x.org xtrans: xtrans: xtrans: PACKAGE NAME: xvidtune-1.0.2-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 25 K PACKAGE SIZE (uncompressed): 90 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xvidtune: xvidtune xvidtune: xvidtune: xvidtune is part of X11. xvidtune: xvidtune: For more information about the X.Org Foundation (the providers of the xvidtune: X.Org implementation of the X Window System), see their website: xvidtune: xvidtune: http://www.x.org xvidtune: xvidtune: xvidtune: PACKAGE NAME: xvinfo-1.1.1-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 14 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xvinfo: xvinfo xvinfo: xvinfo: xvinfo is part of X11. xvinfo: xvinfo: For more information about the X.Org Foundation (the providers of the xvinfo: X.Org implementation of the X Window System), see their website: xvinfo: xvinfo: http://www.x.org xvinfo: xvinfo: xvinfo: PACKAGE NAME: xwd-1.0.4-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 24 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xwd: xwd xwd: xwd: xwd is part of X11. xwd: xwd: For more information about the X.Org Foundation (the providers of the xwd: X.Org implementation of the X Window System), see their website: xwd: xwd: http://www.x.org xwd: xwd: xwd: PACKAGE NAME: xwininfo-1.1.1-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 31 K PACKAGE SIZE (uncompressed): 100 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xwininfo: xwininfo xwininfo: xwininfo: xwininfo is part of X11. xwininfo: xwininfo: For more information about the X.Org Foundation (the providers of the xwininfo: X.Org implementation of the X Window System), see their website: xwininfo: xwininfo: http://www.x.org xwininfo: xwininfo: xwininfo: PACKAGE NAME: xwud-1.0.3-x86_64-1vl70.txz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 22 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xwud: xwud xwud: xwud: xwud is part of X11. xwud: xwud: For more information about the X.Org Foundation (the providers of the xwud: X.Org implementation of the X Window System), see their website: xwud: xwud: http://www.x.org xwud: xwud: xwud: PACKAGE NAME: MPlayer-20101218-x86_64-1.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 8918 K PACKAGE SIZE (uncompressed): 25930 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: MPlayer: MPlayer (media player) MPlayer: MPlayer: MPlayer is a movie player. It plays most MPEG/VOB, AVI, Ogg/OGM, MPlayer: VIVO, ASF/WMA/WMV, QT/MOV/MP4, RealMedia, Matroska, NUT, NuppelVideo, MPlayer: FLI, YUV4MPEG, FILM, RoQ, PVA files, supported by many native, XAnim, MPlayer: and Win32 DLL codecs. You can watch VideoCD, SVCD, DVD, 3ivx, MPlayer: DivX 3/4/5, WMV and even H.264 movies. MPlayer: MPlayer: Homepage for MPlayer is http://www.mplayerhq.hu/ MPlayer: MPlayer: PACKAGE NAME: PySolFC-1.1-x86_64-1vl70.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 3399 K PACKAGE SIZE (uncompressed): 12810 K PACKAGE REQUIRED: python >= 2.7.1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: PySolFC: PySolFC (solitaire card games written in python) PySolFC: an exciting collection of more than 200 solitaire card games. PySolFC: Its features include very nice look and feel, multiple cardsets and PySolFC: table tiles, samples and background music, unlimited undo/redo, PySolFC: load/save games, player statistics and log files, hint system, demo PySolFC: games, support for user-written plugins, integrated HTML help browser PySolFC: and lots of documentation. PySol is written in 100% pure Python. PySolFC: PySolFC: License: GPL PySolFC: Author: Markus F.X.J. Oberhumer PySolFC: Website: http://www.pysol.org PACKAGE NAME: abiword-2.8.6-x86_64-1vl70.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 4673 K PACKAGE SIZE (uncompressed): 23250 K PACKAGE REQUIRED: aiksaurus >= 1.2.1,aspell >= 0.60.5,boost >= 1.40.0,enchant >= 1.4.2,fribidi >= 0.10.9,glib2 >= 2.22.2,goffice >= 0.8.0,gtk+2 >= 2.18.3,gtkmathview >= 0.8.0,gucharmap >= 2.28.1,libpng >= 1.4.0,libsoup >= 2.28.1,libwpd >= 0.8.14,libwpg >= 0.1.3,libwmf >= 0.2.8.4,link-grammar >= 4.6.4,loudmouth >= 1.4.2,mathml-fonts >= 1.0,ots >= 0.5.0,tidy >= 20091027,wv >= 1.2.7 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: abiword|-----handy-ruler------------------------------------------------------| abiword: abiword (The AbiWord word processor) abiword: abiword: AbiWord is a cross-platform Open Source word processor. The goal is abiword: to make AbiWord full-featured, and remain lean. abiword: abiword: http://www.abisource.com/ abiword: abiword: abiword: Packager: vl70@vector.linux.net on 14-Feb-2011 abiword: abiword: PACKAGE NAME: aiksaurus-1.2.1-x86_64-3vl70.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 323 K PACKAGE SIZE (uncompressed): 730 K PACKAGE REQUIRED: gtk+2 >= 2.10.14 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: aiksaurus|-----handy-ruler------------------------------------------------------| aiksaurus: aiksaurus (An English-language thesaurus library) aiksaurus: aiksaurus: Aiksaurus is an English-language thesaurus library that can be aiksaurus: embedded in word processors, email composers, and other authoring aiksaurus: software to provide thesaurus capabilities. A basic command line aiksaurus: thesaurus program is also included. aiksaurus: aiksaurus: http://aiksaurus.sourceforge.net/ aiksaurus: aiksaurus: aiksaurus: Packager: vl70@vector.linux.net on 13-Feb-2011 PACKAGE NAME: audacious-2.4.4-x86_64-1.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 420 K PACKAGE SIZE (uncompressed): 1810 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: audacious: audacious (A relatively powerful media player) audacious: audacious: Audacious is a media player, based on Beep Media Player, which is in audacious: turn based on the X Multimedia System (XMMS). It is used to play audacious: audio and other kinds of media files. By default Audacious can play audacious: MPEG audio, Ogg Vorbis, RIFF wav, most module formats, and a few audacious: other formats. Audacious can be extended through plugins to play a audacious: number of other audio and video formats. audacious: audacious: The webpage for Audacious is: http://www.audacious-media-player.org. audacious: PACKAGE NAME: audacious-plugins-2.4.4-x86_64-1.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 1358 K PACKAGE SIZE (uncompressed): 5580 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: audacious-plugins: audacious-plugins (Plugins used by the Audacious media player) audacious-plugins: audacious-plugins: This is a collection of plugins for Audacious to support additional audacious-plugins: media formats. audacious-plugins: audacious-plugins: The webpage for Audacious is: http://www.audacious-media-player.org. audacious-plugins: audacious-plugins: audacious-plugins: audacious-plugins: audacious-plugins: PACKAGE NAME: dia-0.97.1-x86_64-1vl70.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 3177 K PACKAGE SIZE (uncompressed): 18670 K PACKAGE REQUIRED: gtk+2 >= 2.18.3,pygtk >= 2.16.0 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: dia: dia (Diagram drawing program) dia: dia: The Dia drawing program can be used to draw different types of dia: diagrams, and includes support for UML static structure diagrams dia: (class diagrams), entity relationship modeling, and network diagrams. dia: Dia can load and save diagrams to a custom file format, can load and dia: save in .xml format, and can export to PostScript(TM). dia: dia: http://www.gnome.org/projects/dia/ dia: dia: Packager: vl70@vector.linux.net on 26-Mar-2011 PACKAGE NAME: epdfview-0.1.7-x86_64-4vl70.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 101 K PACKAGE SIZE (uncompressed): 440 K PACKAGE REQUIRED: cups >= 1.3.9,glib2 >= 2.20.0,gtk+2 >= 2.16.0,poppler >= 0.10.5 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: epdfview|-----handy-ruler------------------------------------------------------| epdfview: epdfview (Lightweight PDF document viewer) epdfview: epdfview: ePDFView is a lightweight PDF document viewer using Poppler and GTK+ epdfview: libraries. The aim of ePDFView is to make a simple PDF document epdfview: viewer, in the lines of Evince but without using the Gnome libraries. epdfview: epdfview: http://trac.emma-soft.com/epdfview epdfview: epdfview: epdfview: Packager: root@vector.linux.net on 26-Feb-2011 epdfview: PACKAGE NAME: exaile-0.3.2.0-x86_64-1vl70.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 1155 K PACKAGE SIZE (uncompressed): 8390 K PACKAGE REQUIRED: dbus >= 1.2.3,dbus-python >= 0.83.0,gstreamer >= 0.10.21,gst-plugins-base >= 0.10.21,gst-plugins-good >= 0.10.9,gst-python >= 0.10.13,gtk+2 >= 2.14.3,libgpod >= 0.6.0,pygtk >= 2.13.0,python >= 2.6,python-cddb >= 1.4,python-mutagen >= 1.14,python-sexy >= 0.1.9,python-sqlite >= 2.5.0 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: exaile|-----handy-ruler------------------------------------------------------| exaile: exaile (A music player) exaile: exaile: Exaile is a media player aiming to be similar to KDE's AmaroK, but exaile: for GTK+. It incorporates many of the cool things from AmaroK (and exaile: other media players) like automatic fetching of album art, handling exaile: of large libraries, lyrics fetching, artist/album information via exaile: the wikipedia, last.fm support, optional iPod support (assuming you exaile: have python-gpod installed). exaile: exaile: http://www.exaile.org exaile: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: flash-player-10-x86-1vl70.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 3653 K PACKAGE SIZE (uncompressed): 11700 K PACKAGE REQUIRED: curl >= 7.20.0,gtk+2,nss PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: flash-player: flash-player (Play Adobe Flash content) flash-player: flash-player: Adobe Flash Player is the high-performance, lightweight, highly flash-player: expressive client runtime that delivers powerful and consistent flash-player: user experiences across major operating systems, browsers, mobile flash-player: phones, and devices. It enables organizations and individuals to flash-player: build and deliver great digital experiences to their end users. flash-player: This package includes both the plugin and the standalone player. flash-player: Homepage: http://www.flash.com/ flash-player: flash-player: Packager: vl70@vector.Linux.net on 16-Jan-2011 PACKAGE NAME: fluxbox-1.3.1-x86_64-1.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 707 K PACKAGE SIZE (uncompressed): 3760 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: fluxbox: fluxbox (Fluxbox window manager) fluxbox: fluxbox: Fluxbox is yet another windowmanager for X that is based on blackbox fluxbox: but with many new features. fluxbox: fluxbox: fluxbox: fluxbox: fluxbox: fluxbox: fluxbox: PACKAGE NAME: galculator-1.3.4-x86_64-1vl70.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 103 K PACKAGE SIZE (uncompressed): 770 K PACKAGE REQUIRED: gtk2 >= 2.14.4,libglade >= 2.6.3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: galculator|-----handy-ruler------------------------------------------------------| galculator: galculator (GTK 2 based scientific calculator) galculator: galculator: galculator is a GTK 2 based scientific calculator with "ordinary" and galculator: reverse polish notation. galculator: galculator: http://galculator.sourceforge.net/ galculator: galculator: galculator: Packager: vl70@vector.linux.net on 14-Feb-2011 galculator: galculator: PACKAGE NAME: gdm-2.20.11-x86_64-1vl70.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 2217 K PACKAGE SIZE (uncompressed): 15050 K PACKAGE REQUIRED: bluecurve-icon-theme,consolekit >= 0.3.0,fedorainfinity-gdm-theme,glib2 >= 2.20.1,gtk+2 >= 2.16.1,hal >= 0.5.11,libglade >= 2.6.4,libgnomecanvas >= 2.26.0,nss >= 3.12.2.0,pango >= 1.24.0,shadow >= 4.1.2.2,rarian,zenity >= 2.24.0 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gdm: gdm (The GNOME Display Manager) gdm: gdm: Gdm (the GNOME Display Manager) is a highly configurable gdm: reimplementation of xdm, the X Display Manager. Gdm allows you to log gdm: into your system with the X Window System running and supports running gdm: several different X sessions on your local machine at the same time. gdm: gdm: http://download.gnome.org/sources/gdm gdm: gdm: gdm: Packager: vl70@vector.linux.net on 23-Feb-2011 PACKAGE NAME: geany-0.19.1-x86_64-1vl70.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 1916 K PACKAGE SIZE (uncompressed): 6860 K PACKAGE REQUIRED: glib2 >= 2.20.1,gtk+2 >= 2.16.1,pango >= 1.24.1,vte >= 0.20.1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: geany|-----handy-ruler------------------------------------------------------| geany: geany (A fast and lightweight IDE using GTK2) geany: geany: Geany is a small and fast editor with basic features of an geany: integrated development environment. geany: geany: http://www.geany.org/ geany: geany: geany: Packager: vl70@vector.linux.net on 14-Feb-2011 geany: geany: PACKAGE NAME: geany-plugins-0.19-x86_64-1vl70.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 353 K PACKAGE SIZE (uncompressed): 1950 K PACKAGE REQUIRED: enchant >= 1.5.0,geany >= 0.19,gtkspell >= 2.0.15,lua >= 5.1.4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: geany-plugins|-----handy-ruler------------------------------------------------------| geany-plugins: geany-plugins (Plugins for Geany) geany-plugins: geany-plugins: Plugins for Geany. geany-plugins: geany-plugins: http://plugins.geany.org/ geany-plugins: geany-plugins: geany-plugins: Packager: vl70@vector.linux.net on 14-Feb-2011 geany-plugins: geany-plugins: geany-plugins: PACKAGE NAME: gecko-mediaplayer-1.0.0-x86_64-1vl70.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 70 K PACKAGE SIZE (uncompressed): 550 K PACKAGE REQUIRED: gnome-mplayer PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gecko-mediaplayer: gecko-mediaplayer (Browser plugin to play media using gnome-mplayer) gecko-mediaplayer: gecko-mediaplayer: Gecko Media Player is a browser plugin that uses GNOME MPlayer to play gecko-mediaplayer: media in a browser. It should work with all browsers on Unix-ish gecko-mediaplayer: systems(Linux, BSD, Solaris) and use the NS4 API (Mozilla, Firefox, gecko-mediaplayer: Opera, etc.). gecko-mediaplayer: gecko-mediaplayer: http://code.google.com/p/gecko-mediaplayer/ gecko-mediaplayer: gecko-mediaplayer: gecko-mediaplayer: Packager: vl70@vector.linux.net on 26-Mar-2011 PACKAGE NAME: geeqie-1.0-x86_64-3.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 767 K PACKAGE SIZE (uncompressed): 4280 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: geeqie: geeqie (Geeqie image viewer) geeqie: geeqie: Geeqie is an interactive GTK based image viewer that supports multiple geeqie: image formats, zooming, panning, thumbnails, and sorting images into geeqie: collections. geeqie: geeqie: Homepage: http://geeqie.sourceforge.net geeqie: geeqie: geeqie: geeqie: geeqie: PACKAGE NAME: gftp-2.0.19-x86_64-2.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 576 K PACKAGE SIZE (uncompressed): 3630 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gftp: gftp (FTP client for X) gftp: gftp: gFTP is a multithreaded FTP client for X written using GTK+. It gftp: features simultaneous downloads, resuming of interrupted file gftp: transfers, file transfer queues, downloading of entire directories, gftp: ftp proxy support, remote directory caching, passive and non-passive gftp: file transfers, drag-n-drop support, bookmarks menu, stop button, gftp: and many more features. gftp: gftp: gftp: PACKAGE NAME: gimp-2.6.11-x86_64-2.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 9994 K PACKAGE SIZE (uncompressed): 57890 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gimp: gimp (The GNU Image Manipulation Program) gimp: gimp: The GIMP is a powerful tool for the preparation and manipulation of gimp: digital images. The GIMP provides the user with a wide variety of gimp: image manipulation, painting, processing, and rendering tools. The gimp: GIMP's open design and extensible architecture make for a very gimp: powerful end product for photo and image retouching, web graphics gimp: design, or digital illustration. gimp: gimp: gimp: PACKAGE NAME: gkrellm-2.3.5-x86_64-1.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 523 K PACKAGE SIZE (uncompressed): 2070 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gkrellm: gkrellm (GNU Krell Monitors) gkrellm: gkrellm: GKrellM charts SMP CPU, load, Disk, and all active net interfaces gkrellm: automatically. An on/off button and online timer for the PPP interface gkrellm: is provided. Monitors for memory and swap usage, file system, internet gkrellm: connections, APM laptop battery, mbox style mailboxes, and cpu temps. gkrellm: Also includes an uptime monitor, hostname label, and clock/calendar. gkrellm: gkrellm: Bill Wilson is the author of GKrellM. gkrellm: gkrellm: PACKAGE NAME: gksu-2.0.2-x86_64-1vl70.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 133 K PACKAGE SIZE (uncompressed): 650 K PACKAGE REQUIRED: atk >= 1.32.0-x86_64-1,cairo >= 1.10.2-x86_64-1,coreutils >= 8.10-x86_64-1 | floppy >= 5.4-x86_64-3 | kdeutils >= 4.5.5-x86_64-1 | shadow >= 4.1.4.2-x86_64-3 | sudo >= 1.7.4p6-x86_64-1 | vasm >= 7.0-noarch-1vl70,cxxlibs >= 6.0.14-x86_64-1 | gcc-g++ >= 4.5.2-x86_64-2,dbus >= 1.4.1-x86_64-1,expat >= 2.0.1-x86_64-2,fontconfig >= 2.8.0-x86_64-1,freetype >= 2.4.4-x86_64-1,gcc >= 4.5.2-x86_64-2,gconf >= 2.31.91-x86_64-1vl70,gdk-pixbuf2 >= 2.22.1-x86_64-2,glib2 >= 2.26.1-x86_64-2,glibc-solibs >= 2.13-x86_64-1,gnome-keyring >= 2.28.2-x86_64-1vl70,gtk+2 >= 2.22.1-x86_64-3,libICE >= 1.0.7-x86_64-1,libSM >= 1.2.0-x86_64-1,libX11 >= 1.4.1-x86_64-1,libXau >= 1.0.6-x86_64-1,libXcomposite >= 0.4.3-x86_64-1,libXcursor >= 1.1.11-x86_64-1,libXdamage >= 1.1.3-x86_64-1,libXdmcp >= 1.1.0-x86_64-1,libXext >= 1.2.0-x86_64-1,libXfixes >= 4.0.5-x86_64-1,libXi >= 1.4.1-x86_64-1,libXinerama >= 1.1.1-x86_64-1,libXrandr >= 1.3.1-x86_64-1,libXrender >= 0.9.6-x86_64-1,libgtop >= 2.28.1-x86_64-1vl70,libpng >= 1.4.5-x86_64-1,libxcb >= 1.7-x86_64-1,orbit2 >= 2.14.19-x86_64-1vl70,pango >= 1.28.3-x86_64-1,pixman >= 0.20.2-x86_64-1,scripts >= 1.0.1-noarch-2 | xauth >= 1.0.5-x86_64-1,startup-notification >= 0.10-x86_64-1,sudo >= 1.7.4p6-x86_64-1,util-linux-ng >= 2.18-x86_64-2,xcb-util >= 0.3.6-x86_64-1,zlib >= 1.2.5-x86_64-4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gksu: gksu (a Gtk+ frontend to su and sudo) gksu: gksu: GKSu is a library that provides a Gtk+ frontend to su and sudo. It gksu: supports login shells and preserving environment when acting as a su gksu: frontend. It is useful to menu items or other graphical programs that gksu: need to ask a user's password to run another program as another user gksu: gksu: License: GPL gksu: Authors: gksu: Website: PACKAGE NAME: gnome-mplayer-0.9.9.2-x86_64-1vl70.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 276 K PACKAGE SIZE (uncompressed): 1240 K PACKAGE REQUIRED: dbus >= 1.2.12,gtk+2 >= 2.16.0,libgpod >= 0.7.0,libmusicbrainz3 >= 3.0.2,libnotify >= 0.4.5 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gnome-mplayer|-----handy-ruler------------------------------------------------------| gnome-mplayer: gnome-mplayer (GUI for MPlayer) gnome-mplayer: gnome-mplayer: Gnome MPlayer is a simple GUI for MPlayer. It is intended to be a nice gnome-mplayer: tight player and provide a simple and clean interface to MPlayer. gnome-mplayer: gnome-mplayer: http://code.google.com/p/gnome-mplayer/ gnome-mplayer: gnome-mplayer: gnome-mplayer: Packager: vl70@vector.linux.net on 14-Feb-2011 gnome-mplayer: gnome-mplayer: PACKAGE NAME: gnumeric-1.10.13-x86_64-1vl70.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 10552 K PACKAGE SIZE (uncompressed): 31730 K PACKAGE REQUIRED: guile >= 1.8.7,libgsf >= 1.14.18,goffice >= 0.8.10,perl >= 5.12.1,pygtk >= 2.21.0,python >= 2.7 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gnumeric: gnumeric (Spreadsheet program for GNOME) gnumeric: gnumeric: Gnumeric is a spreadsheet program for the GNOME GUI desktop gnumeric: environment. gnumeric: gnumeric: http://www.gnome.org/gnumeric/ gnumeric: gnumeric: gnumeric: Packager: vl70@vector.linux.net on 26-Mar-2011 gnumeric: gnumeric: PACKAGE NAME: grip-3.3.1-x86_64-8vl70.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 403 K PACKAGE SIZE (uncompressed): 1020 K PACKAGE REQUIRED: cdparanoia >= III_10.2,curl >= 7.19.0,glib2 >= 2.20.3,gtk+2 >= 2.16.2,id3lib >= 3.8.3,libbonobo >= 2.24.0,libbonoboui >= 2.24.0,libgnome >= 2.24.0,libgnomeui >= 2.24.0,vorbis-tools,vte >= 0.20.5 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: grip: grip (Front-end for CD rippers and Ogg Vorbis encoders) grip: grip: Grip is a GTK+ based front-end for CD rippers (such as cdparanoia and grip: cdda2wav) and Ogg Vorbis encoders. Grip allows you to rip entire grip: tracks or just a section of a track. Grip supports the CDDB protocol grip: for accessing track information on disc database servers. grip: grip: http://www.nostatic.org/grip/ grip: grip: grip: Packager: vl70@vector.linux.net on 17-Feb-2011 PACKAGE NAME: gucharmap-2.33.2-x86_64-1.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 2082 K PACKAGE SIZE (uncompressed): 7260 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gucharmap: gucharmap (character map utility) gucharmap: gucharmap: gucharmap is a Unicode character map and font viewer. gucharmap: gucharmap: gucharmap: gucharmap: gucharmap: gucharmap: gucharmap: gucharmap: PACKAGE NAME: imagemagick-6.6.6_10-x86_64-1.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 4761 K PACKAGE SIZE (uncompressed): 31020 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: imagemagick: imagemagick (a robust collection of image processing tools) imagemagick: imagemagick: ImageMagick is a collection of tools for manipulating and displaying imagemagick: digital images. It can merge images, transform image dimensions, imagemagick: do screen captures, create animation sequences, and convert between imagemagick: many different image formats. imagemagick: imagemagick: ImageMagick was written by John Cristy of ImageMagick Studio. imagemagick: imagemagick: Home page: http://www.imagemagick.org/ imagemagick: PACKAGE NAME: inkscape-0.48.1-x86_64-1vl70.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 10644 K PACKAGE SIZE (uncompressed): 83360 K PACKAGE REQUIRED: atk >= 1.24.0,boost >= 1.37.0,cairo >= 1.8.6,dia >= 0.97,freetype >= 2.3.7,gc >= 7.0,gtkmm >= 2.14.3,gtkspell >= 2.0.15,imagemagick >= 6.5.9.0,lcms >= 1.17,libpng >= 1.4.0,libsigc++ >= 2.2.0,libxml2 >= 2.7.2,libxslt >= 1.1.24,libwpg >= 0.1.3,loudmouth >= 1.4.2,numpy >= 1.2.0,pango >= 1.22.4,perl >= 5.10.0,python >= 2.6,python-lxml >= 2.1.1,poppler >= 0.12.2,popt >= 1.14,pstoedit >= 3.45,uniconvertor >= 1.1.4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: inkscape: inkscape (Vector-based drawing program using SVG) inkscape: inkscape: Inkscape is a free vector-based drawing program. inkscape: Inkscape uses W3C SVG as its native file format. It is therefore a inkscape: very useful tool for web designers and as an interchange format for inkscape: desktop publishing. inkscape: inkscape: http://inkscape.sourceforge.net/ inkscape: inkscape: inkscape: Packager: vl70@vector.linux.net on 26-Mar-2011 PACKAGE NAME: ktsuss-1.4-x86_64-1vl70.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 30 K PACKAGE SIZE (uncompressed): 80 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: ktsuss: ktsuss (a gtk su helper) ktsuss: ktsuss: ktsuss stands for "keep the su simple, stupid", and as the name ktsuss: implies, is a graphical version of su written in C and GTK+ 2 ktsuss: (similar in functionality to kdesu and gksu). ktsuss: ktsuss: The goal of the project is to remain simple and bug free... ktsuss: ktsuss: Homepage: http://developer.berlios.de/projects/ktsuss ktsuss: ktsuss: PACKAGE NAME: sane-1.0.22-x86_64-2.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 2686 K PACKAGE SIZE (uncompressed): 13960 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: sane: sane (Scanner Access Now Easy) sane: sane: SANE is a universal scanner interface that provides standardized sane: access to any raster image scanner hardware, such as flatbed scanners, sane: hand-held scanners, video and still cameras, frame-grabbers, and other sane: similar devices. sane: sane: sane: sane: sane: PACKAGE NAME: scribus-1.3.8-x86_64-1vl70.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 11185 K PACKAGE SIZE (uncompressed): 48920 K PACKAGE REQUIRED: cairo >= 1.8.8,cups >= 1.3.9,freetype >= 2.3.9,ghostscript >= 8.70,gnutls >= 2.8.1,hyphen >= 2.4,lcms >= 1.18,libart_lgpl >= 2.3.19,libjpeg >= 8,libpng >= 1.4.0,libtiff >= 3.9.2,libxml2 >= 2.7.3,openssl >= 0.9.8k | openssl-solibs >= 0.9.8k,podofo >= 0.7.0,python >= 2.6.2,pil >= 1.1.6,qt4 >= 4.5.2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: scribus|-----handy-ruler------------------------------------------------------| scribus: scribus (DeskTop Publishing application written in Qt) scribus: scribus: Scribus is an desktop open source page layout program with the aim of scribus: producing commercial grade output in PDF and Postscript, primarily, scribus: though not exclusively for Linux. scribus: scribus: http://www.scribus.net/ scribus: scribus: scribus: Packager: vl70@vector.linux.net on 14-Feb-2011 scribus: PACKAGE NAME: shotwell-0.8.1-x86_64-1vl70.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 1733 K PACKAGE SIZE (uncompressed): 7180 K PACKAGE REQUIRED: dbus-glib >= 0.86,gconf >= 2.28.0,gstreamer >= 0.10.31,gtk+2 >= 2.20.0,libexif >= 0.6.19,libgee >= 0.5.0,libgexiv2 >= 0.1.0,libgphoto2 >= 2.4.8,libraw >= 0.8.5,libunique >= 1.1.6,sqlite >= 2.6.23,udev >= 151,webkitgtk >= 1.3.2 | webkitgtk >= r62241 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: shotwell: shotwell (A photo organizer for the GNOME desktop) shotwell: shotwell: Shotwell is a new open source photo organizer designed for the GNOME shotwell: desktop environment. It allows you to import photos from your camera, shotwell: view and edit them, and share them with others. shotwell: shotwell: http://www.yorba.org/shotwell/ shotwell: shotwell: shotwell: Packager: vl70@vector.linux.net on 26-Mar-2011 shotwell: PACKAGE NAME: slim-1.3.1-x86_64-5vl70.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 241 K PACKAGE SIZE (uncompressed): 420 K PACKAGE REQUIRED: fontconfig >= 2.6.0,freetype >= 2.3.7,imagemagick >= 6.4.3_10,libXmu >= 1.0.4,libXft >= 2.1.13,libXrender >= 0.9.4,libpng >= 1.4.0,libjpeg >= 8,perl-file-desktopentry >= 0.02,xterm,xwd PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: slim|-----handy-ruler------------------------------------------------------| slim: slim (Simple Login Manager) slim: slim: SLiM (Simple Login Manager) is a graphical login manager for X11. slim: It aims to be simple, fast and independent from the various desktop slim: environments. slim: SLiM is based on latest stable release of Login.app by Per Lidén. slim: slim: http://slim.berlios.de/ slim: slim: slim: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: tango-icon-theme-0.8.90-noarch-1.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 1216 K PACKAGE SIZE (uncompressed): 8650 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: tango-icon-theme: Tango icon theme (Another standard icon theme) tango-icon-theme: tango-icon-theme: The Tango Desktop Project has designed a basic set of desktop icons tango-icon-theme: that follow the style guidelines. The set has been created as a tango-icon-theme: proof of concept for the style, but works rather well as a replacement tango-icon-theme: for the base theme under GNOME and KDE. tango-icon-theme: tango-icon-theme: Tango's home page is: http://tango.freedesktop.org tango-icon-theme: tango-icon-theme: PACKAGE NAME: vlgui-6.0-noarch-1vl60.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 13 K PACKAGE SIZE (uncompressed): 80 K PACKAGE REQUIRED: bash >= 3.0,Xdialog >= 2.2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: vlgui: VL GUI (Basic Vector Linux GUI) vlgui: vlgui: Scripts and skeletons for GUI configuration. vlgui: vlgui: Author: Eko M. Budi vlgui: License: GNU GPL vlgui: Homepage: www.vectorlinux.com PACKAGE NAME: x11-ssh-askpass-1.2.4.1-x86_64-2.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 24 K PACKAGE SIZE (uncompressed): 80 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: x11-ssh-askpass: x11-ssh-askpass (an X11-based passphrase dialog) x11-ssh-askpass: x11-ssh-askpass: x11-ssh-askpass is an X11-based passphrase dialog for use x11-ssh-askpass: with OpenSSH. x11-ssh-askpass: x11-ssh-askpass: x11-ssh-askpass: x11-ssh-askpass: x11-ssh-askpass: x11-ssh-askpass: x11-ssh-askpass: PACKAGE NAME: xarchiver-0.5.2-x86_64-3vl70.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 437 K PACKAGE SIZE (uncompressed): 1320 K PACKAGE REQUIRED: gtk+2 >= 2.14.4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xarchiver: xarchiver (Frontend to various archiver formats) xarchiver: xarchiver: Xarchiver, a lightweight GTK2 only frontend to 7zip, arj, bzip2, gzip, xarchiver: iso, rar, lha, deb, rpm, tar and zip. xarchiver: xarchiver: http://xarchiver.xfce.org/ xarchiver: xarchiver: xarchiver: Packager: vl70@vector.linux.net on 26-Mar-2011 xarchiver: xarchiver: PACKAGE NAME: xchat-2.8.8-x86_64-3.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 1779 K PACKAGE SIZE (uncompressed): 6940 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xchat: xchat (GTK+-based IRC client) xchat: xchat: X-Chat is a GTK+-based IRC (Internet Relay Chat) client. xchat: xchat: xchat: xchat: xchat: xchat: xchat: xchat: PACKAGE NAME: xdialog-2.3.1-x86_64-2vl70.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 304 K PACKAGE SIZE (uncompressed): 670 K PACKAGE REQUIRED: gtk+ >= 1.2.10,gtk2 >= 2.14.4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xdialog|-----handy-ruler------------------------------------------------------| xdialog: xdialog (X11 drop in replacement for cdialog) xdialog: xdialog: Xdialog is designed to be a drop in replacement for the cdialog xdialog: program. It converts any terminal based program into a program xdialog: with an X-windows interface. The dialogs are easier to see and xdialog: use and Xdialog adds even more functionalities (help button+box, xdialog: treeview, editbox, file selector, range box, and much more). xdialog: xdialog: http://xdialog.free.fr xdialog: xdialog: Packager: vl70@vector.linux.net on 14-Feb-2011 PACKAGE NAME: xfburn-0.4.3-x86_64-2vl70.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 291 K PACKAGE SIZE (uncompressed): 1490 K PACKAGE REQUIRED: gstreamer >= 0.10.22,gtk+2 >= 2.14.7,libburn >= 0.6.2,libisofs >= 0.6.12,xfce4-panel >= 4.7.4 | xfce >= 4.7.4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xfburn: xfburn (CD/DVD burning tool) xfburn: xfburn: Xfburn is a simple CD/DVD burning tool based on libburnia libraries. xfburn: It can blank CD-RWs, burn and create iso images, as well as burn xfburn: personal compositions of data to either CD or DVD. xfburn: xfburn: http://goodies.xfce.org/projects/applications/xfburn xfburn: xfburn: xfburn: Packager: vl70@vector.linux.net on 26-Mar-2011 xfburn: PACKAGE NAME: xine-lib-1.1.19-x86_64-1.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 3556 K PACKAGE SIZE (uncompressed): 9730 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xine-lib: xine-lib (xine multimedia playback engine libraries) xine-lib: xine-lib: xine-lib is a free (GPL licensed) high-performance multimedia xine-lib: playback engine. The xine shared libraries are used by xine-ui (and xine-lib: other media players and multimedia applications) for smooth video xine-lib: processing and playback of multimedia streams such as movies, radio xine-lib: and TV network streams, DVDs, and VCDs. xine-lib: xine-lib: xine-lib: xine-lib: PACKAGE NAME: xine-ui-0.99.5-x86_64-3.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 1251 K PACKAGE SIZE (uncompressed): 3310 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xine-ui: xine-ui (xine multimedia playback engine user interface) xine-ui: xine-ui: Xine is a free multimedia player. It plays back CDs, DVDs, and VCDs, xine-ui: multimedia files, and multimedia streamed over a network. xine-ui: xine-ui: The xine-ui package contains the graphical user interface for the xine-ui: xine multimedia player. xine-ui: xine-ui: xine-ui: xine-ui: PACKAGE NAME: xlockmore-5.32-x86_64-1.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 992 K PACKAGE SIZE (uncompressed): 3480 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xlockmore: xlockmore (screen locker for X) xlockmore: xlockmore: Patrick J. Naughton's xlock screensaver/locker for X, with many xlockmore: more modes added by David A. Bagley. xlockmore: xlockmore: The 'Bob' bitmap has been included especially for Slackware, as well xlockmore: as a Linux penguin logo. (NOTE: the image of J. R. "Bob" Dobbs is a xlockmore: registered trademark of The Subgenius Foundation, used by permission) xlockmore: xlockmore: xlockmore: PACKAGE NAME: xsane-0.998-x86_64-1.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 1594 K PACKAGE SIZE (uncompressed): 5210 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xsane: xsane (Graphical frontend to SANE, Scanner Access Now Easy) xsane: xsane: xsane provides a graphical user-interface to control an image xsane: acquisition device such as a flatbed scanner. It allows previewing xsane: and scanning individual images and can be invoked either directly xsane: from the command-line or through the GIMP image manipulation program. xsane: xsane: xsane accesses image acquisition devices through the SANE (Scanner xsane: Access Now Easy) interface. xsane: xsane: PACKAGE NAME: xscreensaver-5.12-x86_64-1.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 3399 K PACKAGE SIZE (uncompressed): 19420 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xscreensaver: xscreensaver (a screen saver and locker for X) xscreensaver: xscreensaver: A modular screen saver and locker for the X Window System. Highly xscreensaver: customizable: allows the use of any program that can draw on the xscreensaver: root window as a display mode. More than 100 display modes are xscreensaver: included in this package. xscreensaver: xscreensaver: xscreensaver: xscreensaver: xscreensaver: PACKAGE NAME: xulrunner-1.9.2.16-x86_64-1vl70.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 9280 K PACKAGE SIZE (uncompressed): 54590 K PACKAGE REQUIRED: atk >= 1.26.0,cairo >= 1.8.6,dbus >= 1.2.12,glib2 >= 2.20.0,gtk+2 >= 2.16.0,hunspell >= 1.2.8,libidl >= 0.8.13,libjpeg >= 8,nspr >= 4.7.3,nss >= 3.12.2.0,pango >= 1.24.0,python >= 2.6.1,sqlite >= 3.6.22,startup-notification >= 0.9,zlib >= 1.2.3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xulrunner: xulrunner (Mozilla runtime package to XUL+XPCOM bootstraping) xulrunner: xulrunner: Mozilla runtime package that can be used to bootstrap XUL+XPCOM xulrunner: applications. It will provide mechanisms for installing, upgrading, xulrunner: and uninstalling these applications. XULRunner will also provide xulrunner: libxul, a solution which allows the embedding of Mozilla technologies xulrunner: in other projects and products. xulrunner: xulrunner: http://wiki.mozilla.org/XUL:Xul_Runner xulrunner: xulrunner: Packager: vl70@vector.linux.net on 26-Mar-2011 PACKAGE NAME: xvidcore-1.2.2-x86_64-3vl70.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 348 K PACKAGE SIZE (uncompressed): 1190 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xvidcore: xvidcore (Free reimplementation of the OpenDivX video codec) xvidcore: xvidcore: Free reimplementation of the OpenDivX video codec. You can play xvidcore: OpenDivX and DivX4 videos with it, as well as encode compatible files. xvidcore: xvidcore: http://www.xvid.org/ xvidcore: xvidcore: xvidcore: Packager: vl70@vector.linux.net on 14-Feb-2011 xvidcore: xvidcore: PACKAGE NAME: zenity-2.30.0-x86_64-1vl70.txz PACKAGE LOCATION: ./xap PACKAGE SIZE (compressed): 2588 K PACKAGE SIZE (uncompressed): 4640 K PACKAGE REQUIRED: glib2 >= 2.20.0,gtk+2 >= 2.16.0,libglade >= 2.6.4,libgnomecanvas >= 2.26.0,libnotify >= 0.4.5,rarian PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: zenity: zenity (Display dialog boxes from shell scripts) zenity: zenity: Zenity lets you display Gtk+ dialog boxes from the command line and zenity: through shell scripts. It is similar to gdialog, but is intended to zenity: be saner. It comes from the same family as dialog, Xdialog, and cdialog. zenity: zenity: http://directory.fsf.org/zenity.html zenity: zenity: zenity: Packager: vl70@vector.linux.net on 14-Feb-2011 zenity: PACKAGE NAME: Terminal-0.4.6-x86_64-1vl70.txz PACKAGE LOCATION: ./xfce PACKAGE SIZE (compressed): 976 K PACKAGE SIZE (uncompressed): 4000 K PACKAGE REQUIRED: atk >= 1.32.0,cairo >= 1.10.2,cxxlibs >= 6.0.14 | gcc-g++ >= 4.5.2,dbus >= 1.4.1,dbus-glib >= 0.88,expat >= 2.0.1,fontconfig >= 2.8.0,freetype >= 2.4.4,gdk-pixbuf2 >= 2.22.1,glib2 >= 2.28.3,glibc-solibs >= 2.13,gtk+2 >= 2.24.3,libICE >= 1.0.7,libSM >= 1.2.0,libX11 >= 1.4.2,libXau >= 1.0.6,libXcomposite >= 0.4.3,libXcursor >= 1.1.11,libXdamage >= 1.1.3,libXdmcp >= 1.1.0,libXext >= 1.2.0,libXfixes >= 5.0,libXi >= 1.4.1,libXinerama >= 1.1.1,libXrandr >= 1.3.1,libXrender >= 0.9.6,libpng >= 1.4.5,libxcb >= 1.7,ncurses >= 5.8,pango >= 1.28.3,pixman >= 0.20.2,util-linux >= 2.19,vte >= 0.26.2,xfce >= 4.8,zlib >= 1.2.5 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: Terminal: Terminal (Xfce's Terminal Emulator) Terminal: Terminal: This is the Terminal emulator application. Terminal is a lightweight Terminal: and easy to use terminal emulator for the X windowing system, with Terminal: some new ideas and features that makes it unique among X terminal Terminal: emulators. Terminal: Terminal: License: GPL Terminal: Authors: Terminal: Website: xfce.org PACKAGE NAME: avahi-0.6.28-x86_64-1vl70.txz PACKAGE LOCATION: ./xfce PACKAGE SIZE (compressed): 390 K PACKAGE SIZE (uncompressed): 2110 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: avahi: avahi (Local network service discovery) avahi: avahi: Avahi is a system which facilitates service discovery on local avahi: network -- this means that you can plug your laptop or computer avahi: into a network and instantly be able to view other people who avahi: you can chat with, find printers to print to or find files being avahi: shared. avahi: avahi: http://avahi.org avahi: avahi: Packager: _PACKAGER on _BUILD_DATE PACKAGE NAME: glade3-3.7.3-x86_64-1vl70.txz PACKAGE LOCATION: ./xfce PACKAGE SIZE (compressed): 1715 K PACKAGE SIZE (uncompressed): 9040 K PACKAGE REQUIRED: gconf >= 2.26.0,glib2 >= 2.20.0,gtk+2 >= 2.16.0,libglade >= 2.6.4,libgnome >= 2.26.0,libgnomecanvas >= 2.26.0,libgnomeui >= 2.24.1,pango >= 1.24.0,python >= 2.6.1,rarian PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: glade3: glade3 (User Interface Designer for GTK+ and GNOME) glade3: glade3: Glade is a RAD tool to enable quick and easy development of user glade3: interfaces for the GTK+ toolkit and the GNOME desktop environment. glade3: glade3: http://glade.gnome.org/ glade3: glade3: glade3: Packager: vl70@vector.linux.net on 27-Mar-2011 glade3: glade3: PACKAGE NAME: gnome-disk-utility-2.32.0-x86_64-1vl70.txz PACKAGE LOCATION: ./xfce PACKAGE SIZE (compressed): 1446 K PACKAGE SIZE (uncompressed): 10030 K PACKAGE REQUIRED: dbus >= 1.2.14,dbus-glib >= 0.80,glib2 >= 2.20.2,gnome-keyring >= 2.26.1,gtk+2 >= 2.16.1,libunique >= 1.0.8,libnotify >= 0.4.5,nautilus >= 2.26.2,polkit >= 0.9,polkit-gnome >= 0.9.2,udisks >= 1.0.0 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gnome-disk-utility|-----handy-ruler------------------------------------------------------| gnome-disk-utility: gnome-disk-utility (Disk management application) gnome-disk-utility: gnome-disk-utility: This package contains the Palimpsest disk management application. gnome-disk-utility: Palimpsest supports partitioning, file system creation, encryption, gnome-disk-utility: RAID, SMART monitoring, etc. gnome-disk-utility: gnome-disk-utility: http://git.gnome.org/cgit/gnome-disk-utility gnome-disk-utility: gnome-disk-utility: gnome-disk-utility: Packager: vl70@vector.linux.net on 27-Mar-2011 gnome-disk-utility: PACKAGE NAME: leafpad-0.8.18.1-x86_64-1vl70.txz PACKAGE LOCATION: ./xfce PACKAGE SIZE (compressed): 88 K PACKAGE SIZE (uncompressed): 440 K PACKAGE REQUIRED: gtk+2 >= 2.14.6 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: leafpad|-----handy-ruler------------------------------------------------------| leafpad: leafpad (GTK+ based simple text editor) leafpad: leafpad: Leafpad is a GTK+ based simple text editor. The user interface is leafpad: similar to Notepad. It aims to be lighter than GEdit and KWrite, and leafpad: to be as useful as them. leafpad: leafpad: http://tarot.freeshell.org/leafpad/ leafpad: leafpad: leafpad: Packager: root@vector.linux.net on 26-Feb-2011 leafpad: PACKAGE NAME: orage-4.8.1-x86_64-2vl70.txz PACKAGE LOCATION: ./xfce PACKAGE SIZE (compressed): 1308 K PACKAGE SIZE (uncompressed): 3770 K PACKAGE REQUIRED: dbus >= 1.2.24,libnotify >= 0.7.0,libxfce4util >= 4.6.2,libxfcegui4 >= 4.6.4,xfce4-panel >= 4.6.4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: orage: orage (Time-managing application for Xfce4) orage: orage: Orage provides a calendar which integrates nicely into the Xfce orage: Desktop Environment. It is highly configurable and supports alerts orage: based on dates. It warns you with popup or audio alarm. As it is an orage: application for every day use it launches itself in the background as orage: a daemon and can be accessed using the Orage Clock plugin for the orage: panel. orage: http://www.xfce.org/ orage: orage: Packager: vl70@vector.linux.net on 26-Mar-2011 PACKAGE NAME: thunar-volman-0.6.0-x86_64-1vl70.txz PACKAGE LOCATION: ./xfce PACKAGE SIZE (compressed): 98 K PACKAGE SIZE (uncompressed): 560 K PACKAGE REQUIRED: libnotify >= 0.7.1,xfce4-panel >= 4.7.4 | xfce >= 4.7.4,thunar >= 1.1.4 | xfce >= 4.7.4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: thunar-volman: thunar-volman (Volume Manager for Thunar) thunar-volman: thunar-volman: The Thunar Volume Manager is an extension for the Thunar file manager, thunar-volman: which enables automatic management of removable drives and media. For thunar-volman: example, if thunar-volman is installed and configured properly, and thunar-volman: you plug in your digital camera, it will automatically launch your thunar-volman: preferred photo application and import the new pictures from the thunar-volman: camera into your photo collection. thunar-volman: http://goodies.xfce.org/projects/thunar-plugins/thunar-volman thunar-volman: thunar-volman: Packager: vl70@vector.linux.net on 26-Mar-2011 PACKAGE NAME: udisks-1.0.2-x86_64-1vl70.txz PACKAGE LOCATION: ./xfce PACKAGE SIZE (compressed): 173 K PACKAGE SIZE (uncompressed): 920 K PACKAGE REQUIRED: dbus >= 1.2.14,dbus-glib >= 0.80,dosfstools,e2fsprogs,floppy,glib2 >= 2.20.2,libatasmart >= 0.12,lvm2 >= 2.02.62,mdadm >= 2.6.4,ntfsprogs,parted >= 2.2,polkit >= 0.9,sg3_utils >= 1.28,smp_utils >= 0.94,sqlite >= 3.6.14,udev >= 151,util-linux-ng,xfsprogs PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: udisks: udisks (Storage Management Service) udisks: udisks: udisks provides a daemon, D-Bus API and command line tools udisks: for managing disks and storage devices. udisks: udisks: http://www.freedesktop.org/wiki/Software/udisks udisks: udisks: udisks: Packager: vl70@vector.linux.net on 26-Mar-2011 udisks: udisks: PACKAGE NAME: upower-0.9.8-x86_64-1vl70.txz PACKAGE LOCATION: ./xfce PACKAGE SIZE (compressed): 120 K PACKAGE SIZE (uncompressed): 840 K PACKAGE REQUIRED: dbus-glib >= 0.80,glib2 >= 2.20.0,libimobiledevice >= 1.0.2,libusb1 >= 1.0.8,pm-utils >= 1.2.4,polkit >= 0.96,sqlite >= 3.6.12,udev >= 151 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: upower: upower (Power Management Service) upower: upower: upower provides a daemon, API and command line tools for managing upower: power devices attached to the system. upower: upower: http://upower.freedesktop.org upower: upower: upower: Packager: vl70@vector.linux.net on 26-Mar-2011 upower: upower: PACKAGE NAME: xfce-4.8-x86_64-3vl70.txz PACKAGE LOCATION: ./xfce PACKAGE SIZE (compressed): 9212 K PACKAGE SIZE (uncompressed): 42890 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xfce: xfce (a fast and lightweight desktop environment for X) xfce: xfce: Xfce is a fast and lightweight desktop environment that is both xfce: visually appealing and easy to use. xfce: xfce: For more information, see: http://www.xfce.org xfce: xfce: Xfce was developed by Olivier Fourdan. xfce: xfce: xfce: PACKAGE NAME: xfce4-mixer-4.6.1-x86_64-2vl70.txz PACKAGE LOCATION: ./xfce PACKAGE SIZE (compressed): 132 K PACKAGE SIZE (uncompressed): 750 K PACKAGE REQUIRED: alsa-lib >= 1.0.23,gstreamer >= 0.10.30,gst-plugins-base >= 0.10.30,libxfce4util >= 4.6.2,libxfcegui4 >= 4.6.4,xfce4-panel >= 4.6.4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xfce4-mixer: xfce4-mixer (Volume control plugin for the Xfce 4 panel) xfce4-mixer: xfce4-mixer: Volume control plugin for the Xfce 4 panel. xfce4-mixer: xfce4-mixer: http://www.xfce.org/ xfce4-mixer: xfce4-mixer: xfce4-mixer: Packager: vl70@vector.linux.net on 26-Mar-2011 xfce4-mixer: xfce4-mixer: xfce4-mixer: PACKAGE NAME: xfce4-notifyd-0.2.1-x86_64-1vl70.txz PACKAGE LOCATION: ./xfce PACKAGE SIZE (compressed): 73 K PACKAGE SIZE (uncompressed): 380 K PACKAGE REQUIRED: dbus-glib >= 0.84,libglade >= 2.6.4,libsexy >= 0.1.11,xfce4-panel >= 4.7.4 | xfce >= 4.7.4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xfce4-notifyd: xfce4-notifyd (Xfce Notify Daemon) xfce4-notifyd: xfce4-notifyd: Xfce4-notifyd is a simple, visually-appealing notification daemon xfce4-notifyd: for Xfce. Applications can use xfce4-notifyd to pop up a notification xfce4-notifyd: bubble by sending messages through D-Bus. xfce4-notifyd: xfce4-notifyd: Homepage: http://goodies.xfce.org/projects/applications/xfce4-notifyd xfce4-notifyd: xfce4-notifyd: xfce4-notifyd: Packager: vl70@vector.linux.net on 26-Mar-2011 xfce4-notifyd: PACKAGE NAME: xfce4-power-manager-1.0.10-x86_64-1vl70.txz PACKAGE LOCATION: ./xfce PACKAGE SIZE (compressed): 564 K PACKAGE SIZE (uncompressed): 3570 K PACKAGE REQUIRED: libnotify >= 0.4.5,libxfce4ui >= 4.7.2 | xfce >= 4.6.1,polkit >= 0.96,udisks >= 1.0.1,upower >= 0.9.4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xfce4-power-manager: xfce4-power-manager (Power Management Daemon for Xfce) xfce4-power-manager: xfce4-power-manager: xfce4-power-manager makes power management functions (such as xfce4-power-manager: suspend and hibernate) easy inside the Xfce Desktop Environment xfce4-power-manager: (but it should also work in any other desktop environment). xfce4-power-manager: xfce4-power-manager: http://goodies.xfce.org/projects/applications/xfce4-power-manager xfce4-power-manager: xfce4-power-manager: xfce4-power-manager: Packager: vl70@vector.linux.net on 26-Mar-2011 xfce4-power-manager: PACKAGE NAME: xfce4-screenshooter-1.6.0-x86_64-2vl70.txz PACKAGE LOCATION: ./xfce PACKAGE SIZE (compressed): 421 K PACKAGE SIZE (uncompressed): 1250 K PACKAGE REQUIRED: xfce >= 4.6.0 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xfce4-screenshooter|-----handy-ruler------------------------------------------------------| xfce4-screenshooter: xfce4-screenshooter-plugin (Screenshot utility for the Xfce desktop) xfce4-screenshooter: xfce4-screenshooter: The Xfce Screenshooter utility allows you to capture the entire xfce4-screenshooter: screen, the active window or a selected region. You can set the delay xfce4-screenshooter: that elapses before the screenshot is taken and the action that will xfce4-screenshooter: be done with the screenshot: save it to a PNG file, copy it to the xfce4-screenshooter: clipboard, or open it using another application. xfce4-screenshooter: xfce4-screenshooter: http://goodies.xfce.org/projects/applications/xfce4-screenshooter xfce4-screenshooter: xfce4-screenshooter: Packager: vl70@vector.linux.net on 14-Feb-2011